2,391 grinding machines used for sale

Control: Siemens 840 Dweight of the machine ca.: 13,5 tdimensions of the machine ca.: 7m x 4m x 2,75m mAccessories:Coolant tankGrinding wheelsVarious spare partsOperating and maintenance instructionsCE conformityDimensions: 7x4x2.75 m ( LxWxH)TECHNICAL DATA:Workpiece data:max. outer diameter: 250 mmwith max. grinding wheels Ø 450 mmmax. diameter to be machined over table: 375 mmProfile depth for dressable grinding wheels: 40 mmmax. workpiece length: 3,600 mmmax. distance between centers (1): 2,800 mmmax. bevel angle: +/- 90°Number of teeth of the workpiece: 1 - 999max. weight of the workpiece: 250 kgWorking area:Center distance between workpiece and tool spindle: 355-170 mmRadial travel: 185 mmAxial travel: 3,000 mmSwivel angle: +/- 90°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 1000 mmgrinding length: 8000 mmswing diameter: 1200 mmcentre height: 600 mmmax. workpiece weight between centres: 10000 kgworkpiece weight max.: 20000 kgworkpiece turning speeds: 5 - 60 U/mingrinding slide speed stepless: 22 - 2240 mm/minrapid travel - grinding head longitudinal: 3500 mm/minturning speed range - grinding spindle: 450 - 1610 U/mingrinding wheel size: 425 /710 x 63 x 305 mmtailstock adjustment: max. 6000 mmworkpiece-drive: 20 kWgrinding motor: 30 kWcrowning with reference to bobbin radius: 0,01 - 1,5 mmtotal power requirement: 85 kWweight of the machine ca.: 35,4 tdimensions of the machine ca.: 13,1 x 3,3 x 2,35 mRoller grinding machine with movable grinding spindle carriage- Hollow and crown grinding device- Telescopic covers- Coolant system- Position tolerance 0.005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0600 mm: 300 mm: 382 mm: 700x340 mm: 355x38x127 mm: 1500 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0600 mm: 300 mm: 382 mm: 700x340 mm: 355x38x127 mm: 2400 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A centerless round and polishing belt grinding machine Loeser (RPS 376/2+2), retrofitted in 2024, is available. Stations grinding/polishing: 2/2, grinding range: 10mm-120mm, belt dimensions X/Y: 3000mm/200mm, feed rate: 15m/min, machine dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.

Centerless grinding machine, ROSSI MONZA 410 Monzesi, Grinding wheel width 200mm Grinding wheel diameter 400 pneumatic compensation, auto plunge, overhaul - retrofit - PLC under power in our warehouse in Gussago BS (Italy) Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylinders, tapered rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, grinding wheels and setting discs have a negative workpiece profile to work which is given to them with the aid of a tool. Centerless through-feed grinding or through-feed grinding and longitudinal grinding: workpieces to be machined proceed continuously with axial feed through the grinding gap., Grinding wheel ...

Surface Grinding Machine ELB SWB06-VAII -Grinding length 600mm -Grinding width 500mm -Spindle speed 1400/2800 rpm -Z - Delivery / Automatic / Manual -Y - Delivery / Automatic / Manual -Grinding Movement / Automatic / Manual - Magnet size 600x500mm -Automatic delivery -Grinding wheels - Pulling device -Grinding wheel diameter max. 300mm -Coolant device -Drive cable approx. 6 KW Dimensions: LxWxH 2.6x2.2x2.5 meters / Weight 3500Kg

Surface Grinding Machine Geibel+Hotz FS 525 z-SA BJ 1995

These are a few key data. - CNC universal cylindrical grinding machine WUG 21 basic machine from CNC-Technik Weiss. (The WUG 21 is a Karstens machine bed on which the CNC is built.) - Year of construction 2008 / max. single-shift - 1000mm tip width - Workpiece headstock and tailstock MK4 - Disc Ø up to 500mm - Lens position 26.5° inclined - Grinding wheel drive with programmable SUG - Grinding headstock can be swivelled manually on air cushions - Window right - Internal grinding device mounted on the back incl. dressing device - Eckelmann control system - DIN programming - Cycle programs - Manual grinding, yes - Automatic dressing - Marposs structure-borne sound for external grinding wheel incl. software package - Grinding wheel spindle and workpiece spindle with V-belt drive

0: 415 l0: 280 mmweight of the machine ca.: 1,5 ttotal power requirement: kWdimensions of the machine ca.: mcharge load: : for excavatemachine without flywheel drive motor and frequenzy regulatorgross working tank volume: 600 litersuseful volume: 415 literslargest possible workpiece dimension (measured diagonally): 280mmtotal weight: 1140kgdrive power at 1500 rpm: 4kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Reform CNC rotary table surface grinding machine is available. Segment head: 560mm, segment dimensions X/Y/Z: 94mm/38mm/180mm, number of segments: 10, segment head speed: 720rpm, rapid traverse: 2m/min. Rotary table diameter: 900mm, rotary table speed: 40rpm, new segment working height: 400mm, control: Siemens 805, operating hours: 55800h. Documentation available. On-site inspection is possible.

Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China.

JOTES SPD 40 surface grinding machine was built in 1988 in Poland by PONAR-JOTES Łódź. The machine, designed for precision grinding of workpieces, is an excellent choice for professional production applications. Workpieces placed on a large magnetic plate are ground by means of a spindle with a grinding wheel, which moves transversally and vertically. This solution, combined with the ability to automatically/manually adjust the height of the grinding wheel, significantly increases the accuracy and precision of the machining process. The SPD 40 magnetic surface grinding machine weighs 4800 kg. Technical specifications of the JOTES SPD 40 grinding machine - work table dimensions (L x W): 1000 x 400 mm - work table feed rate: 2-30 m/min - minimum work table stroke: 200 mm - grinding wheel dimensions (diameter x width x bore): 350 x 63 x 127 mm - grinding wheel stroke adjustment r ...

Long belt grinding machine TYPE: LZG-M-1 Table size 2500 x 1000 mm with speed control •For grinding, matting and polishing steel Strip speed: 5-30 m/s infinitely electronically adjustable by potentiometer Electromotive, maintenance-free table height adjustment; Adjustment range: 350 mm Working area: 2300 x 1000 mm Belt dimensions: 6800x150 mm Motor power sanding belt: 5.5kW Max. table load: 200 kg Steel table structure with wooden slats; Incl. adjustable workpiece stop Table guide by means of hardened and ground guide shaft Ø 35 mm and 6-way ball bearings on each side Dimensions sanding pad: 320x350 mm Central and clear control panel Single-sided large column projection: 1000x350 mm Incl. workpiece lighting Fold-out extraction hood for better dust extraction- Diameter of drive roller: 0 300 mm- Diameter of suction nozzle: 0 180 mm- Air Velocity: 2 25 m/s-  ...

Double bench grinder, Fabr. Cordes & Sluiter, Type DOT-300 -Motor power 0.85 kW -Speed 1400 rpm -max grinding wheels Ø 300 x 40 mm -Operating voltage 380 volts

1 gebr. Steel grinding machine, Fabr. Solid, Type DSCD

gebr. Double Bench Grinder Fabr. Griffin Diameter 200 mm Revolutions 3,000 rpm.

grinding diameter: 450 mmgrinding length: 1500 mmcentre height: 225 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China.

Graver grinding machine Make: Lid Model No.: S0 Built in 1994

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck -Manufacturer: SFN, magnetic clamping plate permanent magnetic lathe chuck with chuck flange -Type: PUSd-200 -Clamping surface: Ø 200 mm -Bolt circle: Ø 160 mm M10 -Recording dimensions: see photos -Dimensions: Ø 200 x 60 mm -Total weight: 8 kg

workpiece diameter: 300 mmworkpiece weight: 999 kgworkpiece height: 999 mmgrinding length: mmgrinding width: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mAusstattung:-Digitalanzeige senkrecht Achse -Automatische Zustellung -Automatische Endabschaltung programmierbar-Schleifspindelantrieb mit stufenloser, elektronischer Drehzahlregelung -stufenlos regelbarer Quervorschub, und Tischdrehung -24V Magnetspannplatte 300 mm -diverse Arbeitsschutzeinrichtungen z.B. Schutzhaubenüberwachung, Betriebszustandsanzeige per Ampel -Schmierölstandsüberwachung -die Maschine wurde 2015 generalüberholt, damals Austausch der gesamten Elektrik auf SPS-Steuerung und 24V Steuerspannung -Papierbandfilteranlage speziell für diese Maschine passend Folgende Arbeiten wurden nun noch durchgeführt:-Austausch Faltenbalg und Riemen-Schleifspindel neu gelagert -Schl ...

grinding length: 800 mmgrinding width: 500 mmworkpiece height: 475 mmtable-size: 800 x 450 mmlongitudinal feed: 900 mmhydr. feed stepless: 30 m/mincross feed autom.: 1-30 mmvertical feeds:: 1-99 Myrapid traverse vertical: 0,3 mm/mindimensions of grinding wheel: 350 x 50 x 125 mmgrinding spindle drive: 7,5 kWtotal power requirement: 9,37 kWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 4 x 2,7 x 2 mCondition: ready for operation: Video(s) available on our website.: Machine still in the delivery factory: Electric 380 Volt: Magnetic plate: mmCoolant system with paper belt filter: 30 l/min, 160 lGrinding wheel flanges: Machinefeets: Operation panel: Electr. hand wheel: Grinding wheels: diverse Hydraulic surface grinding machine with AC control for automatic surface and plunge grinding with automatic intermediate dressing and dressing compensation, including various i ...

CN Centerless grinding machine, ROSSI MONZA 1500 CN, currently being overhauled and fully electrically/electronically retrofitted, Siemens electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), step motor on grinding wheel dressing increment, auto size compensation after grinding wheel dressing, Grinding wheel 350 mm 610 mm dia, This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is g ...

gebr. Belt sander, Fabr. Format, Type BS 75 Built in 1999 Grinding width 75 mm with various abrasive belts

1 gebr. Cylindrical grinding machine, Fabr. Cincinnati, Type R 75, Built in 1971 Tip height 130 mm Grinding length 760 mm Spindle bore 38 mm Grinding wheel diameter 300 mm, width 40 mm Workpiece weight 75 kg. Max. Grinding spindle can be swivelled twice

max. grinding diameter: 50 mmgrinding length: 130 mmworkpiece length: 200 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 2 x 2 x 2 mEWAG RS 12 universal grinding machine, built in 1989, technically and visually in good conditionGrinding head:- Motor power: 2.2 kW- Spindle speeds: 1,000 - 8,000 rpm- Spindle inclination (A axis): -10° to +27°- Adjustment accuracy 1 min- Height adjustment (Y axis): 130 mm- Stroke range (X axis): 220 mm- Oscillation stroke, continuously adjustable during oscillation: 0-30 mm- Oscillation frequency: 30/60 rpmWorkpiece slide:- Radius adjustment (Z axis): 0.01-49 mm- Adjustment accuracy: 0.01 mm- Retraction of the slide from the grinding to the measuring position: max. 49 mm- Cross table, clamping surface: 155 x 205 mm- Adjustment range X - Y: 60 mm each- Maximum swivel angle (B axis): 260°- Connection volta ...

Centerless grinding machine - centerless Ghiringhelli M100 CNC 1A 400x100mm wheel CN 1 axis plunge + through feed grinding The machine can be seen working in our warehouse in Gussago BS. Mimu(dot)com machine tools Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Wheel width: 100, Wheel dia ...

Thiel Produro 115 Filing machine - Infinitely variable stroke and speed adjustable - Stroke 40-120mm - Speed 60-300 min - Table swivel 15° - Weight approx. 500kg

Key data: 600 mm, 350 mm

G+H (Geibel + Hotz), FS 635 SA Built in 1997 Grinding area 600x350 Weight: approx. 2,600 kg