We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 102-90)
used
Key data: 380 mm, 500 mm, 6000 1/min
CNC machine Monforts type RNC 3 generally good condition, but currently not ready for use due to a defective electric motor. The machine has always been serviced and was in operation until recently. Sold as a spare parts donor. Specifications - max length to rotate : 500 [mm] - max diameter to rotate : 380 [mm] - Spindle motor : 15 [kW] - Rotation speed : 6000 [rpm] - Number of VDI30 tools on turret : 12 - Rod passage : 65 [mm] Accessories - CNC FANUC 11T control - Pincer chuck -Conveyor The machine can be viewed at any time. Free loading. Transport possible throughout Europe If you have any questions, just write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Tel. 016096679844
used
Description: CNC control FANUC Series 15T with FAPT Max. turning diameter: 420 [mm] Max. diameter over cross slide: 280 [mm] max. turning length: 600 mm Material passage: 65 mm Swing diameter over radial slide: 280 mm Swing diameter over the bed: 420 mm Spindle holder A6 DIN 55026 Revolver with 12 shots Rotation speed: 4000 [rpm] Spindle motor power: 15 [kW]weight approx.: 6,800 kg, Approx. Onsite Dimension. (l x w x h): 3,660 x 2,335 x 2,160 mm
used
turning diameter: 420 mmturning length: 1000 mmcontrol: Fanuc 10 T Monforts Control Fspindle passage: 65 mmturning speeds: 4000 U/minchip conveyor: Tool turret 12 positions: total power requirement: 22 kWweight of the machine ca.: 4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Machine Details Stock number 1105-03806 Machine type CNC lathe - inclined bed machine Make MONFORTS Type RNC 400 AC Year of construction 2001 Control type CNC Control SIEMENS 810 D Storage location FRANCE Country of origin Germany Delivery time by arrangement Freight base from HAGUENAU FRANCE Technical details Turning diameter 420 mm Turning length 600 mm Control SIEMENS 810 D Speed range 70 - 4000 rpm Information With C axis and driven tool holders Tool carrier disc turret VDI 40 (12pcs), bore 40 mm; Power clamping futte DIA 315 MM, chip conveyor coolant device, TAILSTOCK CNC SIEMENS 810 D 24 KW 4000 RPM good condition WITH ACCESSORIES
used
Key data: 380 mm, 500 mm, 6000 1/min
CNC machine Monforts type RNC 5 The RNC 5 was in operation until September, in good condition, immediately available. Specifications - max length to rotate : 500 [mm] - max diameter to rotate : 380 [mm] - Spindle motor : 15 [kW] - Rotation speed : 6000 [rpm] - Number of VDI30 tools on turret : 12 - Rod passage : 65 [mm] Accessories - CNC FANUC 11T control - Pincer chuck -Conveyor The machine can be viewed at any time.
used
Key data: 425 mm, 1000 mm, 4000 1/min
CNC lathe Monforts RNC 5 at call The reliable RNC5 machine has a spindle bore of 40 mm and a diameter of 180 mm. Manufacturer: MONFORTS Model: RNC5 Width: 3500 MM Depth: 2340 MM Height: 1960 MM Weight: 8500 KG Main drive Spindle bore: 40 MM MOVEMENT X-AXIS : 270 MM Z-AXIS : 1020 MM Total power requirement: 32 KW Chip conveyor included - TURNING LENGTH 1000MM - SPINDLE DIAMETER 180MM - TOOLS 12 - CIRCULATING DIAMETER VIA CROSS SLIDE 425MM - ROTARY CUTTER OVER BED 600MM The machine can be viewed at any time. Free loading. Transport possible throughout Europe
used
Type: RNC 5 Plus Mayfran chipconveyorSwing over bed: 600 mm Swing over cross-slide: 425 mm Distance centre tot centre: 1000 mm Spindle cone: A8 Dia of spindle bore: 96 mm Power on the spindle: 18,5 kW Number of speeds: 1 > 4000 rpm Command: GE Fanuc16-T ACCESORIES: yes Toolchanger: yes Number of tools: 12 VDI toolpositions
used
turning diameter: 1000 mmturning length: 1500 mmcontrol: Siemens 840 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter: max. 450 mmturning length: 450 mmcontrol: MSC 518 swing dia. over bed: 520 mmMain spindle:: turning speed range - main spindle: 28 - 2.800 min/-1power capacity - main spindel: 15 / 11 kWspindle bore: 105 mmBar feed: 89 mmspindle nose: JIS A2-8 turret:: number of toolpositions: 10 pos.Shank height for square tool: 25 mmDrill shank diameter: 50 mmchange time: 0,5 secaxis stroke:: x-axis: 260 (225 + 35) mmz-axis: 500 mmfeeds:: rapid traverse: X/Z: 15 / 20 m/minTipp feed: 0 - 1.260 mm/mintotal power requirement: 28 kVAweight of the machine ca.: 4,0 tdimensions of the machine ca.: 3,0 x 2,0 x 2,2 mDocuments: Turret: Chip conveyor: Coolantsystem: hydraulic system: tool setting: div. tool holder: CNC - LatheMORI SEIKI - CL 25 BThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
MSX-850 Controller Max. turning diameter: 386 mm Max. bar passage: 52 mm Travel X/Y/Z/B: 260/100/590/624 mm Main spindle max. speed: 6,000 rpm Sub-spindle max. speed: 6,000 rpm Beghs3a 12-speed tool turret 12 driven stations 5.5 kW, max. speed: 6,000 rpm Automatic Parts Catcher Conveyor
used
Technische Daten Technical Data Turning Diameter 350/750 mm, X=260 mm Turning length 1300 mm, Z=1345 mm Spindle Speed A2-8, 4000 rpm Spindle Bore 91 mm C-Axis / C-Axis Yes CNC Control - CNC Control MSX 850BM Revolver 12 driven, 12 Live Tools, 6000 rpm If you are interested in this machine, please contact us, we will be happy to send you a detailed offer If you are interested in this machine, please contact us and we will be pleased to send you a detailed offer
used
Machine Details Stock-No. 1105-03853 Type of machine CNC Lathe Make MORI SEIKI Type NLX 2500/700 Year of manufacture 2016 Type of control CNC Storage location HAGUENAU Country of origin Japan Delivery time to be agreed Freight basis ex site Price Technical details turning diameter 356 mm turning length 705 mm control MORI SLIM LIN X-AXIS 260 mm Z-AXIS 795 mm power capacity - main spindle 18,5/15 kW Speed Mainspindle 3300 min/-1 Spindle Bore 91 mm spindle nose JIS A2-8 chuck Kitagawa B-212A8 mm max. chuck pressure 3.1 MPa number of toolpositions 12 pos. Shank diameter 50 mm Shank height for square tool 25 mm Turret change time 0.25 sec. tailstock 734 mm slide. of quill 80 mm rapid power traverse in X-and Z direction 30 m/min rapid travel tail stock 7 m/min total power requirement 27,6 kW Weight of the machine approx. 5.8 t dimensions of the machine app ...
used
CNC controller: FS-31IA(MAPPS 3) Capacity Turning length mm: 1.500 Turning diameter f. lower turret mm: ø350 Max. turning diameter mm: ø 660 Swing over cross-slide mm: ø730 Turn-mill spindle X-axis travel mm: 750 Y-axis travel mm: ±210 Z-axis travel mm: 1.550+100(for ATC) B-axis degree: ±120º (1º index) Speed spindle rpm: 12.000 Drive power kW: 18,5/11 (10min/cont) Tool magazine Magazine places: 100 Tool holder: Capto C6 Tool length max. mm: 400 Tool diameter max. mm: ø140 Tool weight max kg: 8 Lower turret X-axis travel mm: 195 Z-axis travel mm: 1.525 Number of tool slots St .: 12 Indexing time s: 0,28 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 22/18,5 (30min/cont) Spindle nose: JIS A2-8 Counter spindle Speed spindle rpm: 4.000 Drive power spindle kW: 22/18,5 (30min/cont) Spindle nose: JIS A2-8 Equipment Chip conveyor Signal l ...
used
Key data: 450 mm, 525 mm, 3500 1/min
Machine Details Stock-No. 1105-03995 Type of machine CNC Lathe - Inclined Bed Type Make MORI SEIKI Type SL 1 A Year of manufacture 1988 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time by appointment Freight base ex stock HAGUENAU FRANCE Price Technical details Travel -X Axis 230 mm turning diameter 450 mm turning length 525 mm control FANUC 10 T Spindle Bore: Ø 42 mm Number of Turrets: 1 piece No. of tools in turret 1 12 pieces power capacity 7.5 kW spindle nose A2-5 tailstock quill taper MT 4 feed range 1 - 15000 mm/min Rapid traverse 15 m/min total power requirement 12 kW Weight of the machine approx. 4000 kg Additional information Machine in good condition CONTROL FANUC 10 T 3 JAW CHUCK TAILSTOCK COMPLET
used
Machine Details Stock-No. 1105-03874 Type of machine CNC Lathe - Inclined Bed Type Make MORI SEIKI Type SL 15 Year of manufacture 1991 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time by arrangement Freight basis ex stock HAGUENAU FRANCE Technical details Travel -X AXIS 230 mm turning diameter 450 mm turning length 525 mm control FANUC 15TF Spindle Bore: Ø 42 mm Number of Turrets: 1 piece no. of tools in turret 1 12 Stück power capacity 7,5 kW spindle nose A2-5 tailstock quill taper MT 4 feed range 1 - 15000 mm/min Rapid Traverse 15 m/min Additional information Machine in good condition CONTROL FANUC 15 TF CHIP CONVOYER TAILSTOCK NICE MACHINE
used
Machine Details Warehouse number 1105-03539 Machine type CNC lathe Mori SEIKI brand Type SL 15 MC Year of construction 1995 Control type CNC Control fanuc 16 T Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from stock Price Technical details Turning diameter 420 mm Turning length 560 mm Control fanuc 16 T Vibration diameter 455 mm Rapid traverse in X and Z direction 18/24 m/min Travel x/z 220 / 520 mm Rod diameter 45 mm Spindle motor 11 / 7.5 kW Spindle speed 50 - 5000 rpm Spindle torque 143 Nm Spindle nose JIS A2-5 Revolver Stations 12 Tailstock pinole holder MK 4 Tailstock pinole stroke 80 mm Tailstock pinole diameter 75 mm Tailstock travel 450 mm Total power requirement 25 kW Information - CNC - Control MSG 516 fanuc 16 3 BAKE FOOD KITAGAWA DIA 165 - Coolant device SPAENEFOERDERER
used
Machine Details Stock-No. 1105-03860 Type of machine CNC Lathe Make MORI SEIKI Type SL 150 Year of manufacture 1996 Type of control CNC Storage location Warehouse Country of origin Japan Delivery time immediately Freight basis ex Warehouse, free on truck Price Technical details turning diameter 420 mm centre distance 580 mm Turning length max. 500 mm Travel X / Y 230 / 520 mm spindle turning speed range 50 - 5000 rpm spindle nose JIS A2-5 bar diameter round max 42 mm spindle bearing diameter 90 mm tool turret - number of stations 12 (12) Tool Taper 20 x 20 tailstock adjustment 515 mm tailstock quill diameter 85 mm tailstock quill taper MT 4 tailstock travel 120 mm Rapid Travel - Longitudinal/Face 24 / 18 m/min Coolant Tank 160 L connected load 21 kVA Weight of the machine approx. 4.1 t dimensions of the machine approx. 7.5 x 2.5 x 1.8 m Additional infor ...
used
Description: Control unit MSG-501 Number of axes 2 Tool changer: 12-fold with driven tools Chuck size 200 mm Swing 530 mm Turning diameter 390 mm Center distance 620 mm Travel (Z) 520 mm Travel (X) 240 mm Spindle speed 4,000 rpm Spindle motor 15/10 Bar capacity: 5.1 cm equipped with: - ,tailstock - Chip conveyor - Tool presetter - Bar loader LNS quick Load Servo 2 - Tool holder - Chuck WITHOUT suction!weight approx.: 4,650 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,000 x 2,100 mm
used
Machine Details Stock number 1105-03838 Machine type CNC lathe Brand MORI SEIKI Type SL 25 A/500 Year of construction 1991 Control type CNC Control MORI T5 FABT FANUC Storage location HAGUEANAU FRANCE Country of origin Japan Delivery time immediately Freight base from site Technical details Turning diameter 260 mm Turning length 625 mm Control MORI T5 FABT FANUC Circumferential diameter over bed 520 mm Orbital diameter via slide 350 mm Turning length 530 mm Travel - x 160 mm Travel - z 590 mm Speed 35-3500 rpm Spindle nose A2-6 Spindle bore 80 mm Bearing diameter 130 mm Turret head 12 P Tool change time 0.7 sec Rapid traverse X-axis 12 m/min Rapid traverse Z-axis 15 m/min Quill diameter 110 mm Quill stroke 100 mm Tailstock displacement 491 mm Drive power - spindle motor 15/11 kW Total power requirement 40 kW Machine weight ca. 5 t Space requirement ap ...
used
Machine Details Stock number 1105-03771 Machine type CNC lathe Brand MORI SEIKI Type SL 25 B/500 Year of construction 1992 Control type CNC Control mori Fanuc MF T6 T6 fanuc mori Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from site Technical details Turning diameter 260 mm Turning length 625 mm Control mori Fanuc MF T6 T6 fanuc mori Circumferential diameter over bed 520 mm Orbital diameter via slide 350 mm Turning length 530 mm Travel - x 160 mm Travel - z 590 mm Speed 35-3500 rpm Spindle nose A2-6 Spindle bore 80 mm Bearing diameter 130 mm Turret head 10 pos. VDI Tool change time 0.7 sec Rapid traverse X-axis 12 m/min Rapid traverse Z-axis 15 m/min Quill diameter 110 mm Quill stroke 100 mm Tailstock displacement 491 mm Drive power - spindle motor 15/11 kW Total power requirement 40 kW Machine weight ca. 5 t ...
used
Key data: 935 mm, 2030 mm, 2400 1/min
achine details Stock-No. 1105-03966 Type of machine CNC Lathe Make MORI SEIKI Type SL 403 B X 2000 Year of manufacture 2003 Type of control CNC Storage location HAGUENAU Country of origin Japan Delivery time to be agreed Freight basis ex site Price Technical details turning diameter max. 935 mm centre distance 2063 mm control MSG Fanuc 518 Standard Turning Dia. 730 mm Turning Speed Range - Main Spindle 2400 min/-1 power capacity - main spindle 30 / 22 kW Spindle Bearing Diameter 240 mm usable bar diameter 117 mm Chucking diameter 500 mm spindle nose ASA-A2 / 11 number of toolpositions 12 pos. Shank diameter 32 mm X-Axis 345 mm Z-Axis 2100 mm diameter of quill 150 mm Tailstock Adjustment 1,500 mm taper of center MT 5 total power requirement 144 kVA Weight of the machine approx. 15.0 t dimensions of the machine approx. 6.2 x 3.0 x 2.6 m Accessories Docu ...
used
turning diameter: max. 820 mmturning length: max. 790 mmcontrol: MSC 516 turning diameter over bed: 890 mmturning diameter over cross slideways: 560 mmcentre distance: 900 mmMain spindle:: turning speed range - main spindle: 4 - 1.800 min/-1power capacity - main spindel: 37 / 30 kWmax. Torque: 3.870 NmNumber of speed ranges: 3 spindle bearing diameter: 170 mmspindle bore: 105 mmmax. usable bar diameter: 89 mmspindle head: JIS A1-11 turret:: number of toolpositions: 12 pos.Shank height for square tool: 32 mmDrill shank diameter: max. 65 mmaxis stroke:: x-axis: 435 (25 + 410) mmz-axis: 860 mmTailstock:: tailstock: 680 mmdiameter of quill: 110 mmquill stroke: 100 mmtaper of center: MK 4 feeds:: rapid traverse: X: 5 / Z: 8 m/minTipp feed: 0 - 1.260 mm/mintotal power requirement: 62 kVAweight of the machine ca.: 9,2 tdimensions of the machine ca.: 6,5 x 3,0 x 2,6 mDocuments: Chip convey ...
used
Key data: 230 mm, 550 mm
CNC lathe Mori Seiki SL 25 A 500 - Built in 1990 - 1st hand and from your own use - Fully functional, energized, ready for demonstration - X-axis travel: 160 mm - Z-axis travel: 590 mm - Turning diameter over bed: Ø520 mm - Diameter over cross slide: Ø350 mm - Center spacing: 625 mm - Machining diameter: Ø230 mm - Max. machining length: 550 mm - Number of tool positions: 12 - Main spindle motor: 15/11 kW - Control: Fanuc Series O-T - Dimensions: 2860x1520x1750 mm – 4200 kg
used
Description: KITAGAWA chuck Type: B-210 Max. 3500 rpm Drill spindle: ø50 mm MAYFRAN tension conveyor FANUC A06B servo drivesturning diameter: 340 mm, Drehlänge: 535 mm, serial number: 262, turning diameter over slide: 520 mm, feed range: 12,000 mm/min, x-motion: 285 mm, y-motion: 100 mm, z-motion: 590 mm, Accessories included: No, control: MSC-518, toolchanger positions: 12, number of places for driven tools: 6, number of controlled axes: 4, spindle bore: 80 mm, turning speed range: 35-3500 rpm, weight approx.: 4,400 kg, Approx. Onsite Dimension. (l x w x h): 3,300 x 1,560 x 1,750 mm
used
Key data: 1090 mm, 250 mm, 550 1/min
Mori Seiki SL 80F CNC lathe (chucker) CNC control MF-T5 (Fanuc 15 TA) Circulation diameter above bed 1300 mm Turning diameter 1090 mm Turning length 250 mm X-axis travel 425 mm Z-axis travel 1100 mm Spindle speed 550 rpm Spindle nose A2-15 Spindle motor 45 kW Number of tools on turret 6 Tool Cone Mori If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.
used
turning diameter: 520 mmturning length: 755 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter: 196 mmturning length: 444 mmcontrol: Sinumerik total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 828D12-fold revolverdriven toolsC-axis3-jaw chuckchip conveyortail stockcoolant deviceTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 470 mmmax. Drehdurchmesser / max. turning diameter 196 mmmax. Drehlänge / max. turning lenght 444 mmX-Weg / X-travel 161 mmZ-Weg / Z-travel 520 mmDrehzahl / spindle speed 4500 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesEilgang X / rapid feed X 30 m/minEilgang Z / rapid feed Z 30 m/min.Gewicht der Maschine ca. / weight ca. 3950 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are no ...
used
turning diameter: 200 mmturning length: 235 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
bar capacity: 42 mmMax. Turning length: 100 mmcontrol: MITSUBUSHI M70 turning speed range - spindle: 100 - 4.000 U/minNumber of axles: 4 St.CNC lathe | müga - GTA4-42S equipped with chip conveyor.The machine is in very good condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: GTA 4 | GTA4 42S | GTA-4 | GTA 4 42 SThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Excellent , New LMS Spänefoderer
used
serial number: 31302 control: Fanuc with double spindles: turning diameter: max. 600 mmx-travel: 1000 mmwith magazine: extensive accessories: ca. 100 Aufnahmen, auch angetriebenweight of the machine ca.: 13 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Machine type: CNC lathe Year of construction1987 ControlSiemens Sinumerik 840 DSL(NEW) Mech. Overhaul2021 Machining diameter [mm] 350 Circulation diameter[mm] 400 Turning length [mm] 1000 Support path Z-axis [mm] 1185 Support path X-axis [mm] 370 Main spindle: Technology: DC motor Speed range: 22.4-3550 rpm Gear stages:3 Power: 36kW torque: 1600Nm Spindle head:Size 8 Chuck Diameter:250mm Tool carrier: Technology: Drum turret with directional logistics Tool holders: 12 pieces Tailstock: Pinole diameter:100 mm Pinole Hub:100mm Pinole axial force:15kN Internal cone mount:SK 30 Lunettes: Single and tandem arrangement, self-centering, clamping range:50 –130 mm Hydraulic operating pressure For chucks, drum revolvers, tailstocks and bezels: 60bar Clamping device pressure variable:5 –50 bar Container capacity:60 l Equipment / Accessories: Chip ...
used
CNC Lathe 2 axes OERLIKON-BOEHRINGER VDF 180 C Numerical Command: PHILIPS Axe X: 295 mm Axe Y: 295 mm Between points: 1000 mm Maxi Ø on bench: Ø 310 mm Maxi turning diameter: Ø 250 mm Rotation: max 4500 RPM Year of construction: 1984 Spindle: Ø 78 mm Turret 8 tools Weight: approx 8 T
used
Key data: 300 mm, 450 mm, 3000 1/min
Control OSP P20L-R Max. turning diameter 300 mm Max. turning length 450 mm Spindle speed 3000 min-1 3-jaw chuck diameter 210 mm 12-speed revolver with attached Competition. Conveyor
used
Key data: 300 mm, 450 mm
Control OKUMA ... OSP-P300LA-e Turning diameter ... 300mm Rotation length... 450mm Inclined bed Spindle bore ... 68mm Driven tools 12 Axis X ... 235mm Axis Z ... 520mm Axis C ... 360° Machine weight... 5000kg L x W x H ... 2545x1870x1791mm Main engine power ... 11/15kW Bar feeder Spindle speed ... 38-3800 rpm The machine is in good condition, possible to test under electricity.
used
Key data: 420 mm, 1250 mm, 3500 1/min
Stock number: 3859 CNC LATHE Manufacturer: OKUMA, Type: LB 25 II x 1250 Machine NO.: 0202, Year of manufacture: 1995 Specifications: Max. circulation diameter 420 mm dia. Max. turn. About Bed 620 mm Dia. Turning length 1250 mm Main spindle speed range 65-3500 rpm Bore through drawing tube 73 mm dia. Spindle bore 80 mm dia. X axis movement 300 mm Z Ash Movement 1275 mm Tool turret with 12 stations Control OSP 7000 Fabr. Operating hours Spindle 16987 - New spindel bearings at 14.500 hours Hours Accessories: Hydr. Chuck Main Spindle Kitagawa B-212 - 12" mm dia Various tool holders. 12 Tool setter Hydraulic tailstock. Length: 4250 mm, Height: 2150 mm, Width: 2200 mm, Weight: 7400 kg
used
Key data: 340 mm, 1000 mm, 5000 1/min
Control: OSP-P200 Turning length: 1,000 mm Turning diameter: 340 mm Vibration diameter above bed 580 mm Speed: 45 – 5,000 rpm Tool turret 12 places (driven) Bar passage 80 mm Direct recording: BMT 60 Equipment: - One touch IGF -Conveyor - Touchsetter - 3-jaw chuck (SMW 315 HB) passage 85 mm - NC tailstock - Multilingual control - Coolant pump 8 bar
used
Key data: 470 mm
Inv. Num. : 6709 Type: LB3000 EX II Producer: Okuma Created: 2017 Parameters: Duty cycle: 7971 h Hours: 3397 h Max. turning diameter: 470 mm Minimum spindle speed: 5000 1/min Spindle power: 22 kW
used
Year of construction: 2009 Condition: good (used) Turning diameter over face slide: 580 mm Turning length: 1,000 mm Turning diameter: 360 mm Spindle bore: 80 mm Motor power: 22,000 W Spindle speed (max.): 3,000 rpm Spindle speed (min.): 20 rpm X-axis travel: 260 mm Z-axis travel: 1,000 mm Total weight: 7,500 kg Equipment: Documentation/manual, infinitely variable speed Okuma LB3000 EX MC1000, OSP P200L, Big Bore main spindle, automatic door on the left side, BMT60 turret with 12 driven tool stations (direct drive), NS tailstock, CE declaration of conformity, documentation, chip conveyor, coolant system with 8 bar, German/English documentation Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, inspection in our showroom including demonstration and acceptance, loading, transport, assembly and commissionin ...
used
Year of construction: 1993 Condition: good (used) Turning diameter over face slide: 530 mm Turning length: 850 mm Turning diameter: 450 mm Spindle bore: 80 mm Motor power: 30,000 W Spindle speed (max.): 3,000 rpm Spindle speed (min.): 10 rpm X-axis travel: 330 mm Z-axis travel: 850 mm Main spindle drive power: 30,000 W Total height: 180 cm Equipment: Documentation/Manual Okuma LB35 II M, OSP 5020LG, tailstock, touch setter, suction, coolant pump 8 bar, chip conveyor, in good condition in relation to age, very little spindle hours and very well maintained. Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, inspection in our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and subsequent service. Caa ...
used
: max. 800 mmturning length: max. 800 mmchuck: ohne documentation: inkl. weight of the machine ca.: 8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Type: LT200-MY Twin Star Year of construction: 12/2006 Commissioning: 2007 Control: OSP – P200L Delivery time: ex stock The lathe is in very good general condition. Due to the basic and additional equipment, this used machine is versatile. With the automatic bar feeder, the double turret equipment, the additional Y-axis and the parts catcher, the machine produces your workpieces completely independently. From start to finish. Due to the equipment with main and counter spindle, production can be economically effective and fast. Machinery Collet chuck SMW on both sides Main and counter spindle Y-axis Conveyor Bar loading magazine Turbo 5-55 Parts catcher - B-turret with swivel ejection to the collection box (at the door). Onward transport by internal parts conveyor belt. Technical details Swing diameter: mm 400 turning diameter: mm 210 turning length: mm 960 2 tool ...
used
Manufacturer: OKUMA Type LU 25 M Year of construction 2004 Control OSP U 100L Machine weight approx. 7.5 t Tool holder VDI 40 Speed range 3500 1/min Turning diameter 420 mm Turning length 650 mm Space requirement approx. 3.75 x 2.26 x 2.15 m Tool turret - 1x 12 / 1x 10 / Pos
used
Key data: 550 mm, 1500 mm, 2800 1/min
Control OSP 7000L Max. turning diameter 550 mm Turning length 1500 mm Spindle speed 2800 min-1 12-speed revolver with attached Competition. Lower turret 10-speed Tailstock 3-jaw chuck diameter 500 mm Conveyor
used
Key data: 560 mm
Okuma LU 35 M. Sold on behalf of the customer. Further data on request. Inspection possible in operation.
used
Year of construction: 2009 Condition: good (used) Turning length: 1,000 mm Turning diameter: 650 mm Equipment: Documentation/Manual Okuma LU-45 MC-1000, control OSP P200L, turning length 1000 mm, double turret VDI50, A-turret with driven tools 12 pieces, B-turret 10 tool positions, tailstock, touch setter, gradation for oil mist, door automatic, belt filter system with coolant cooling, tool package Footprint 4800 x 3400 mm Delivery: free loaded truck 100% payment before loading upon invoicing. Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, inspection in our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and subsequent service. We operate Okuma CNC service throughout Europe both electronically ...
used
Control: OSP-U100L Turning length: 1,000 mm Turning diameter: max. 500 mm Circulation diameter over bed: 500mm Circulation diameter over face slide: 500 mm Tool holder: SK 40 Tool slots: 60 slots Travel: X-axis: 430 mm Y-axis: 190(+/-95) mm Z-axis:1,090 mm C-axis: 0.001° - Three-jaw chuck SMW Autoblok - Programmable tailstock -Conveyor - Paper belt filter system with high-pressure pump - Oil mist extraction - Touchsetter - one Touch IGF - Door Automatic - Large baking package - Large tool package - Machine comes from a Swiss production - Very good condition
used
max. turning diameter: 580 mmturning length: 1500 mmcontrol: OSP 7000 L greates pass round over bed: 610 mmswing diameter over slide rest: 580 mmMain spindle:: turning speed range - main spindle: 12 - 2.800 min/-1spindle bearing diameter: 150 mmspindle bore: 110 mmspindle nose: JIS A2-11 power capacity - main spindel: 37 (30) kWC-Axis: 0,001 °axis stroke:: x-axis: 598 mmy-axis: 230 (+110 / -120) mmz-axis: 1.660 mmfeeds:: rapid traverse: X / Y: 12.000 mm/minrapid traverse: Z: 20.000 mm/minrapid traverse: C: 100 min/-1cutting feed speed: X / Z / Y: 0,001 - 1.000 mm/Uturret:: type: H2 ATC number of toolpositions: 2 (1x L-Tool / 1x M-Tool) pos.driven statition: stufenlos / stepless Spindle speed - driven tool stations: 40 - 3.000 min -1tool shank height: 25 mmBoring bar shank diameter: 50 mmTailstock:: diameter of quill: 120 mmquill stroke: 170 mmtaper of center: MT 5 tool magazin:: n ...
used
Key data: 300 mm, 450 mm, 3800 1/min
Control OKUMA ... OSP-P300LA-e Turning diameter... 300mm Rotation length ... 450mm Inclined bed Spindle bore ... 68mm Tool changer... 12 Driven tools... 6 Bar feeder Axis X ... 235mm Axis Z ... 520mm Axis C ... 360° Machine weight ... 5000kg L x W x H ... 2545x1870x1791mm Main engine power ... 11/15kW Spindle speed ... 38-3800 rpm. The machine is in good condition, possible to test under electricity.
used
CNC lathe LB 3000 EX II Manafacture: Okuma Corporation Year of manufacture: 2017 Control OKUMA ... OSP-P300LA Turning diameter ... 580mm Turning length ... 950mm inclined bed Axis Y ... 120mm Spindle bore ... 91mm Tool turret ... 12/12 Axis X ... 260mm Axis Z ... 510mm Spindle speed ... 0-5000 rpm. Rapid traverse of the X axis ... 25m/min Rapid traverse of the Z axis ... 30m/min Rapid traverse of the Y axis ... 12.5m/min Axis C ... 360° Main engine power... 22kW L x W x H ... 3420 x 2041x 2444 mm Machine weight ... 6600kg The machine is in good condition, possible to test under power.