Lathe was bought fully reconditioned from a reseller in 1996 and has been used since 2010. Mechanically is in good conditions, NC is to be checked.
400 € Description: - Control: FANUC SYSTEM 3 T - Center height: approx. 165 mm - Turning length: approx. 600 mm - the machine is equipped with a 5-fold tool turret, a tailstock as well as a four-jaw chuck - Jaw chuck diameter: 160 mm - Spindle passage: approx. 38 mmweight approx.: 1,500 kg, dimensions (l x w x h) approx.: 1,800 x 950 x 1,600 mm
turning diameter: 430 mmturning length: 1000 mmcontrol: CNC turning diameter over bed slide: 277 mmspindle passage: 30 mmnumber of spindle speeds: 30 - 2800 U/minx-axis: 240 mmz-axis: 700 mmweight of the machine ca.: 3,0 tdimensions of the machine ca.: 2,5 x 1,9 x 1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 320 mmturning length: 400 mmcontrol: FANUC 21i-T swing diameter over face slide: 165 mmnumber of spindle speeds: 50-4500 weight of the machine ca.: 3 twww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 130 mmturning length: 180 mmcontrol: Siemens 840D bar capacity: 42 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC fine lathe Make: PetrolGer Type: TNL Control: Siemens 810T Built: 1991 Equipment and accessories: - Swivel loader system - Small conveyor belt - Charging-unloading gripper - Chip conveyors - Foot lever for clamping and relaxing the collet
Type CNC Vertical lathe Model TFM 100 Control system NUM 1060 Retrofit of CNC in 1997 stroke X axis 1450 mm stroke Z axis 1000 mm spindle power 37 kW Machining diameter : 1240mm Tool changer: 12 positions
Machine Details Stock-No. 1105-03782 Type of machine CNC Lathe - Inclined Bed Type Make BIGLIA Type B 121 S CNC Year of manufacture 1989 Type of control CNC Storage location FRANCE Country of origin other Delivery time at once Freight basis free loaded Technical details turning diameter 520 mm turning length 420 mm control fanuc ot Spindle Bore: 45 mm turning speed range - spindle 4900 rpm Rapid traverse 20/12 m/min tool taper VDI 30 tail stock MK 4 total power requirement 20 kW weight of the machine approx. 3.5 t dimensions of the machine approx. 2900x1800x1800 mm Additional information WITH FANUC OT CONTROL Tailstock 3 Jaw Chuck Chuck Chip Convoyer
Machine Details Stock number 1105-03732 Machine type CNC lathe - inclined bed machine Brand BIGLIA Type B 111 - S Year of construction 1995 Control type CNC Control Fanuc 0-T Storage location FRANCE Country of origin Taiwan Delivery time by arrangement Freight base from location Technical details Turning diameter 180 mm Turning length 280 mm Control Fanuc 0-T Rod passage: 42 mm Speed range - spindle 6000 rpm Feed range - turret / infinitely variable 1 - 12000 mm/min Rapid traverses 20 / 24 m/min Number of tool turrets: 1 piece Tool turret - places: 12 stations Tool holder direct pick-up Tailstock MK 3 Total power requirement 7.5 kW Machine weight ca. 3,2 t Space requirement approx. 2800x1700x1700 mm Accessories 3 - Baking - Lining Complete machine documentation Conveyor Parts catcher Collet device Electronic handwheel Coolant device Tool - Sett ...
control: FANUC Serie 18 I-T number of tapers in turret head: 2x12 weight of the machine ca.: 5.750 tTwin Spindle Lathe | BIGLIA - B 201 Fequipped with chip conveyorThe machine is in a well-maintained condition.Technical data of the machine will follow soon.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: B201F | B-201 F | B201 F | B-201F | B 201-FThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description: BIGLIA B750 CNC Lathe diameter max. of bar , ,65mm | 80mm | 93/100mm diameter max. machining , ,552/350mm | 552/450mm | 552mm max speed spindle , ,4500rpm/ 3500rpm/ 3000rpm spindle nose , , ,6' HANDLE/ 8' HANDLE/ 8' HANDLE Spindle motor power , ,30-40 kW/ 15-22 kW/ 30-38 kW Sub spindle motor power , ,5000-4500 rpm (only on SM & YS versions) number of tools , ,16/12 X Axis Displacement , ,305mm Axis Y Displacement , ,140 mm (only in Y & YS versions) Z Axis Displacement , ,860mm Fast Scroll X | AND | z , ,18m/min | 7.5 m/min (only in Y & YS versions) | 24m/min Dimensions , ,(chip extractor included) 507 cm/ 203 cm/ 222 cm weight approx.: 7,800 kg, dimensions (l x w x h) approx.: 5,000 x 2,200 x 2,222 mm
turning diameter: 570 mmturning length: 1000 mmcontrol: Sinumerik 805 Siemensclamping length: ca 1200 mmgreates pass round over bed: 570 mmswing diameter over face slide: 365 mmturning speed range - main spindle: 3 - 2.500 min/-1power capacity - main spindel: 15 / 19 kWspindle bore: 62 mmspindle head: DIN 55027 No. 8diameter of quill: 80 mmtaper of center: MK 5 quill stroke: 190 mmtotal power requirement: 40 kVAweight of the machine ca.: 5,6 tLathe cycle controled- SIEMENS Sinumerik 805 / Simeodrive 611- 4-Jaw Chuck, Handwheel, Covering- Chip Tray & coolant- adjustable feet- approx 20 tool holders2021 Electrics/controls check by BoehringerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 570 mmturning length: 1000 mmcontrol: NUM CNC Plusclamping length: ca 1200 mmgreates pass round over bed: 570 mmswing diameter over face slide: 365 mmturning speed range - main spindle: 3 - 2.500 min/-1power capacity - main spindel: 15 / 19 kWspindle bore: 62 mmspindle head: DIN 55027 No. 8diameter of quill: 80 mmtaper of center: MK 5 quill stroke: 190 mmtotal power requirement: 40 kVAweight of the machine ca.: 5,6 tLathe cycle controled- NUM Plus - 4-Jaw Chuck, Handwheel, Covering- Chip Tray & coolant- adjustable feet- tool holdersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 290 mmturning length: 850 mmswing diameter: 600 mmcontrol: Siemens type: 840 D mmspindle passage: 103 mmturning speeds: 3000 U/minlive tooling: 3000 U/minrapid travel - grinding spindle: 25 m/mintotal power requirement: 65 kWweight of the machine ca.: 11 tdimensions of the machine ca.: mOffer price without toolsOptionally, the accessories can also be purchased: 106 steel holders for indoor and outdoor use.External machining, 20driven tools(including 10 x angle tools) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: max. 440 mmcentre distance: 1000 mmweight of the machine ca.: 6 tserial number: 1113.1214-23 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 330 mmturning length: 1000 mmcontrol: VDF 32T swing diameter over slide rest: 215 mm- bar diameter (max): 52 mmMAIN SPINDLE: - chuck bore diameter: 52 mm- spindle revolutions (min): 31 /min- spindle revolutions (max): 5000 /min- drive power (max): 25 kWX/Z SLIDE: - traverse velocity Z (min): 0.1 mm/min- traverse velocity Z (max): 10000 mm/min- traverse velocity X (min): 0.1 mm/min- traverse velocity X (max): 10000 mm/min- rapid traverse Z: 10000 mm/min- rapid traverse X: 10000 mm/min- tool fixture: Revolver - tool fixture: DIN 69880 40 mm - number of tool positions (total): 12 TAILSTOCK: - sleeve stroke: 80 mm- sleeve diameter: 90 mmTOOL MAGAZINE: - number of positions: 12 x-axis: 295 mmz-axis: 1148 mmboring diameter: 10 -200 mmtotal power requirement: 72 kWdimensions of the machine ca.: 8,1 mtotal wight: 4,9 x 3,1 x 2,1 tequipped with:- CNC control VDF 32T- Hydraul ...
Control VDF B2T Turning length 2000 mm Turning diameter over bed 420 Turning diameter via Support 350 Turning diameter via tailstock 350 Power 36 KW Spindle bore 75 mm
Description: Please pay attention to the availability period, a reservation is possible with deposit. Control Siemens Sinumerik 840C Working range Center distance approx. max.: 3000 mm Swing diameter over bed max.: 520 mm Swing diameter over support: 480 mm Headstock Torque at the working spindle max.: 750 Nm Speed range of working spindle: 30 - 3000 rpm Spindle head size: 8 (DIN 55026) Spindle bore: 103 mm Drum tool storage Tool holder: DIN 69880 Change positions: 12 Change positions for driven tools: 6 Tool speed range: 20 - 2500 rpm Additional equipment Coolant system Chip conveyor Steady rest Please have a look at our , technical data in PDF.turning diameter: 520 mm, Drehlänge: 3,000 mm, serial number: 1114.3722-24, turning diameter over slide: 480 mm, Integrated C-axis: Yes, control: SIEMENS Sinumerik 840C, toolchanger positions: 12, number of places for driven ...
Universal CNC lathe BOEHRINGER NG 200 Manufacturer: BOEHRINGER Type [ type]: NG200 CNC double Control unit: Siemens 840D Year of construction[construction year]: 10/2001 Rotating diameter: 290 mm Turning length: 850 mm Control: SIEMENS 840 D Orbital diameter over bed: 600 mm Revolver 1 Revolver 2 Counter spindle Counter headstock Tailstock C-axis Powered tools Automatic machine doors – newly retrofitted Z-axis resolution: 40nm (2nm interpolated) Travel in Z: 740mm Rapid traverse speed in Z: 25 m/min Centering tip SK 30 X-axis resolution: 125nm (8nm interpolated) Travel in Z: 220mm Rapid traverse speed in Z: 25 m/min Distance between main and counter spindle: 1034mm Drive power: 30-72 kW Torque: 662 Nm Speed range max.: 4500 rpm Spindle head: Size 6/8 DIN 55026 Spindle diameter in the front. Bearing [spindle]: 120 mm Chuck diameter: 200-315mm Spindl ...
Tower CNC BOLEY CITIZEN BE 42 Y TECHNICAL SPECIFICATIONS: Year: 2008 CN Type: MITSUBISHI Meldas 635LCC Number of axes: 8 X1 axis stroke: 170 [mm] Z1 axis stroke: 200 [mm] X2 axis stroke: 110 [mm] Z2 axis stroke: 395 [mm] X3 axis stroke: 110 [mm] Z3 axis stroke: 170 [mm] Y-axis stroke: -/+ 40 [mm] Tool holder type: DIN 69880 - 20x40 Spindle passage diameter: 42 [mm] Mini speed. Pin: 80 [rpm] Maximum speed. Pin: 8000 [rpm] C-axis indexing accuracy: 0.001 [°] Pin power: 7.5 [kW] Counter-spindle passage diameter: 42 [mm] Mini speed. Counter spindle: 60 [rpm] Maximum speed. Counter spindle: 6000 [rpm] C-axis indexing accuracy counter-spindle: 0.001 [°] Counter spindle power: 2.2 [kW] Maximum diameter. Machinable: 140 [mm] Spindle for clamping clamps: Size 48 DIN 6343 Number of positions - Upper turret: 12 Number of motorized positions - Upper turret: 12 Maximu ...
- X: 1050 mm - Y: 920 mm - Z: 110 mm - table size: 1000 x 1000 mm - speed range: 18.000 rpm - taper fixture: SK 25 - tool changer: 6-station - max. workpiece dimension: Ø 65 mm, hight 65 mm - control: Bosch CC 120 - total power: 12 kW - weight of machine: 900 kg - space requirement (W x D x H): 1,7 x 1,9 x 2,0 m Details milling motor power 4 kW vacuum pump 25 m³ / h very good condition, immediately ready for use servo motors in the axes has run less than single-shift accessories 6 units with collets 14 collets vacuum pump suction with 4 m suction hose machine feet documentation tool presetting device with depth gauge PAV Vario
Length to turn 610 mm Dia. to turn 390 mm Dia. on the bench 390 mm Dia. on the trolley 390 mm Inter-tip distances 700 mm Type of CNC OPTIMAX SIEMENS 840 DiSL base X axis 180 mm Z axis 610 mm Nose of the pin DIN 55027 A1-6 Pin bore 54 mm Number of turrets 1 Number of tools on turret 1 Number of motorized stations 0 Rotation speed 3000 rpm Spindle motor capacity 15 kW
Tip height: 500 mm top width: 2000 mm turning diameter: 1000 mm Dre Ø over carriage: 620 mm spindle nose: CL 11 motor spindle: 37 kW chip conveyor speed: 1500 rpm Spindle bore: 105 mm weight: approx. 8500 kg
Circulation diameter over bed: 540 mmCurrent diameter over slide: 310 mm Description: The machine is in good technical condition, by prior arrangement the possibility of test drive. LxWxH: 2700x1950x2040 mm. Circulation diameter: 540 mm. Circulation diameter above the carriage: 310 mm. Between the tips: 1000 mm. Spindle speed: 27-2250 rpm. Spindle bore: 85 mm. Spindle motor: 15 hp. Weight: 3200 kg. Control system: Fagor 8055TC-A
Circulation diameter above the bed: 400 mm Circulation diameter above the slide: 200 mm The machine is in good technical condition, after prior agreement the possibility of testing. CNC lathe with Fanuc 0i-TF control system with TurnMate programming and BS65 / 1.5 m material feed. Participated in The Jan. 2018. Used in small series and prototypes. Cutting time 460 hours. Machine connected, possibility to test. Turning machine parameters: - turning length 750 mm, maximum diameter above the carton 400 mm, max. diameter over the slide 200 mm. -Drive in X / Z 220/860 mm, rapid speed X / Z 6/8 m / min. spindle speed 2 gears - 80-400 / 400-2000 - spindle power / total power of the machine 5.5 / 10 kW - turret head for 6 tools, outer knife 25 x 25 or inner max. diameter 32 mm - hard universal 200 mm + soft and spare back. -Hydraulic tailstock MT4, tailstock path 150mm -max. by diameter by the ...
The machine is in good technical condition, by prior arrangement the possibility of testing. Bar feeder FMB 2x Spindle Live tools Turning tools High pressure unit Signal light 2x C-axis Mitshubishi control
The machine is in good technical condition, by prior arrangement the possibility of testing. Bar feeder FMB 2x Spindle Live tools Turning tools High pressure unit Signal light 2x C-axis Mitshubishi control
CNC lathe M 32 V Manufacturer: Citizen YEAR: 2011 Control CINCOM ... M6B Turning diameter ... 32mm Rotation length ... 325mm Axis Y ... 275mm Counter spindle Spindle bore ... 36mm Tool turret ... 30/15 Bar loader Axis C ... 0,001° The machine is in good condition, possible to test under power.
CNC tower (5 axes) Spindle Single turret Brand: CMZ Model: GL20 Year: 2007 Order: FANUC 31i Series Equipment: 6 power tools Integrated robot with 14 pallets Hydrobar Bar Shoot - Length: 3000 2 AUTOBLOK chucks 1 clamp holder
turning diameter: 460 mmturning length: 400 mmcontrol: Fanuc 32 iTB swing diameter over slide rest: 460 mmdrive capacity - spindle motor: 14 kWturning speeds: 4500 U/minnumber of controlled axis: 2 number of tapers in turret head: 12 direktweight of the machine ca.: 5,0 tdimensions of the machine ca.: 3,7 x 2,9 x 3,4 mCNC- lathe with gantry loader and stocker- gantry loader GL6 two axis- double part gripper 2x 3 kg- 14 station work stocker- some tooling- Chip conveyor- 3 jaw chuck Ø 175 mm- chuck blaster system- coolant 6/15 barThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control : D.Electron Z 32 Peak height 220 mm Tip width 1000 mm Turning over bed 440 mm Turning diameter via slide 245 mm Travel -Z Axis 750 mm Width of the lathe bed 320 mm Spindle holder CL 6" Spindle bore 62 mm Spindle speeds 0 - 2500 rpm. Rapid speed X/Z 7 m/min Pinien travel by hand 200 mm Pinole diameter 80 mm Pinole holder MK 4
Control : D.Electron Z 32 Peak height 260 mm Tip width 1500 mm Turning over bed 520 mm Turning diameter via slide 310 mm Travel -Z Axle 1250 mm Travel -X-axis 270 mm Width of the lathe bed 400 mm Spindle holder CL 8" Spindle bore 110 mm Spindle speeds 0 - 2000 rpm. Rapid speed X/Z 5 m/min Pinien travel by hand 220 mm Pinole diameter 80 mm Pinole holder MK 5 Total installed power 18 kW (Electronically reduced) Engine hours 1828 h
Control : Heidenhain Peak height 260 mm Tip width 1500 mm Turning over bed 520 mm Turning diameter via slide 310 mm Travel -Z Axle 1250 mm Travel -X-axis 270 mm Width of the lathe bed 400 mm Spindle holder CL 8" Spindle bore 110 mm Spindle speeds 0 - 2000 rpm. Rapid speed X/Z 5 m/min Pinien travel by hand 220 mm Pinole diameter 80 mm Pinole holder MK 5 Total installed power 18 kW (Electronically reduced) Engine hours 1828 h
Control : D.Electron Z 32 Peak height 220 mm Tip width 1000 mm Turning over bed 440 mm Turning diameter via slide 245 mm Travel -Z Axis 750 mm Width of the lathe bed 320 mm Spindle holder CL 6" Spindle bore 62 mm Spindle speeds 0 - 2500 rpm. Rapid speed X/Z 7 m/min Pinien travel by hand 200 mm Pinole diameter 80 mm Pinole holder MK 4
Peak height above bed 210 mm Tip distance 950 mm Permissible diameter on bed 420 mm Permissible diameter on slide 160 mm Head Spindle passage 62 mm Spindle nose ASA 6 - Type 2 Engine Power 10.7 kW Spindle bore 62 mm Speed 0 - 3500 rpm. CNC Control D. Electron Z32
turning diameter: - mmturning length: 1020 mmcontrol: Fanuc 18i-TB total power requirement: kWweight of the machine ca.: 12500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The DANOBAT NA 750 CNC lathe was built in 2001 by Danobat S. Coop. in Spain. The machine is equipped with SIEMENS Sinumerik numerical control, a tool measuring probe and DUPLOMATIC tool head. The lathe has two axes – X and Z, and their maximum feeds are respectively 255 and 520 mm. Rapid feeds in the X and Z axes are 20 m/min. The lathe processes a workpiece with a maximum turning diameter over the bed of 700 mm. The total weight of the NA750 machine is 11.5 tons. Technical data of the NA 750 CNC lathe – CNC control: SIEMENS Sinumerik – turning diameter over the bed: 700 mm – maximum feeds in the X / Z axis: 255/520 mm – rapid feeds in the X and Z axis: 20 m/min – sleeve diameter: 120 mm – sleeve movement range: 100 mm – spindle tip: ASA-8 – maximum distance between the spindle tip and the left tool head: 935 mm – internal diameter of spindle bearings: 150 ...
The DANOBAT NA 750 CNC lathe was manufactured in 2001 by Danobat S. Coop. in Spain. The machine, equipped with a SIEMENS Sinumerik CNC control and operates in two axes, X and Z, with maximum feeds of 255 and 520 mm respectively. Fast feeds in axes are 20 m/min. The headstock of the lathe consists of a main spindle placed on bearings and a pulley receiving the rotational movement. The main spindle is driven by the main motor through a belt. The tailstock tip with an Morse MK5 cone is made of steel with increased hardness, which ensures long-lasting operation. The headstock roller bearings and tailstock bearings are lubricated with KLUBER ISOFLEX SUPER LDS-18 grease. The workpiece may have a maximum turning diameter of 700 mm above the bed. The machine is also equipped with a tool measuring probe, an Morse MK5 cone and a DUPLOMATIC tool head, accommodating 12 tools. The CNC lathe NA ...
The DANOBAT NA 750 CNC lathe was manufactured in 2001 by the Spanish company Danobat S. Coop. The machine with a power of 45 kW, processes a workpiece with a maximum turning diameter over the bed of 700 mm. The machine is equipped with: DUPLOMATIC tool head with a capacity of 12 tools, a tool measurement probe and a SIEMENS Sinumerik CNC control. The lathe works in two axes X and Z with maximum feeds of 255 mm (X axis) and 520 mm (Z axis). On the other hand, rapid feeds in the X and Z axes are 20 m/min. The total weight of the NA750 machine is 11,500 kg. Technical data of the DANOBAT NA 750 CNC lathe – CNC control: SIEMENS Sinumerik – turning diameter over the bed: 700 mm – maximum feeds in the X / Z axis: 255/520 mm – rapid feeds in the X and Z axis: 20 m/min – sleeve diameter: 120 mm – sleeve movement range: 100 mm – spindle tip: ASA-8 – maximum distance betw ...
The DANOBAT NA 750 CNC lathe was built by the Spanish company Danobat S. Coop. in 2001. The machine body is made of MEHANITE alloy characterised by high rigidity and excellent vibration and shock absorption. Its 60-degree angle of inclination facilitates the mechanical or manual removal of the swarfs. The spindle of the machine consists of a main spindle running on bearings and a belt pulley receiving the rotary motion. The main spindle is driven by the main motor through a belt. The tailstock with Morse MK5 cone is made of steel with increased hardness to ensure long-lasting operation. The DANOBAT NA 750 lathe equipped with a SIEMENS Sinumerik CNC control processes a workpiece in X and Z axes with maximum feeds of 255 mm (X axis) and 520 mm (Z axis). The workpiece can have a maximum diameter of 700 mm above the bed. The machine is also equipped with a HEINDENHAIN LS186 ML340 optic ...
TEM / model width of bed 32 "(810) DHK-960, 1120, 1220, 1320, 1420, 1520, 1620 1500 2000 3000 Capacity maximum swing over bed 960 (37.8 ") 1120 (44") 1220 (48 ") 1320(51.97") 1420 (55.91 ") 1520 (59.84") 1620(63.78") Center height 480 (18.9 ") 560 (22") 610 (24 ") 660 (25.98") 710 (27.95 ") 760 (29.92") 810(31.89") Swing over cross slide 550 (21.65 ") 710 (27.95") 810 (31.89 ") 910 (35.83) 1010 (39.76") 1110 (43.7 ") 1210 (47.64") Z axis travel 1500 (59 ') 2000 (78.74 ") 3000 (118.11") Z-axis travel changed by different turret, chuck or tailstock. Distance between centres 1500 (59 ') 2000 (78.74 ") 3000 (118.11") Length of bed 3960 (155.91 ") 4460 (175.6") 5460 (215 ") Width of bed 810mm (31.88 ") Headstock spindle bore Ã&cedi ...
Machine details Bearing number 1105-03132 Machine type CNC lathe - slantbed machine Made GILDEMEISTER Type CTX 400 Built in 2000 Control type CNC Warehouse FRANCE Country of origin Germany Delivery time SOFORT Freight base from location, free loading truck Technical details Turning diameter 570 mm Turning length 635 mm Control Heidenhain CNC Pilot 4290 Turning diameter over bed slide 420 mm Spindle speeds - infinitely 25-5000 rpm Number of driven tools 6 mm Drive 5 kW Information CNC Heidenhain Pilot 4290 C-axis with 5 FESTE vdi holders 1 3 BAKE FOOD 1 X SPAENEFOERDERER WITH REITSTOCK + LNS STANGEN VORCHUB
Machine Details Warehouse number 1105-03558 Machine type CNC lathe - inclined bed machine GILDEMEISTER brand Type CTX 400 Year of construction 1999 Control type CNC Control Heidenhain CNC Pilot Storage location FRANCE Country of origin Germany Delivery time IMMEDIATELY Freight base from location, freely loaded truck Technical details Turning diameter 570 mm Turning length 635 mm Control Heidenhain CNC Pilot Turning diameter over bed slide 420 mm Spindle speeds - infinitely variable 25-5000 rpm Number of driven tools 6 mm Drive 5 kW Information CNC Heidenhain Pilot CNC 2 AXIS MACHNE WITH 8 FIXED vdi 30 holders 1 3 BAKING FOOD 1 X SPAENEFOERDERER WITH TAILSTOCK
Machine Details Stock number 1105-03811 Machine type CNC lathe - inclined bed machine Brand GILDEMEISTER Type CTX 410 Year of construction 2004 Control type CNC Control HEIDENHAIN TURN PLUS Storage location FRANCE Country of origin Germany Delivery time available at short notice Freight Base EX WORK Technical details Turning diameter 320 mm Turning length 600 mm Turning diameter 320 mm Travel - x 260 mm Travel - z 635 mm Orbital diameter 680 mm Orbital diameter via slide 365 mm Spindle bore diameter 87 mm Turret head (x-fold) 12 Main spindle speed heidenhain turn plus 1/min Rapid traverse X + Z - axles 24/30 m/min Drive power - spindle motor 21 kW Control HEIDENHAIN TURN PLUS Power supply 40 kVA Information control HEIDENHAIN TURN PLUS 2 AXIS MACHINE 12-fold turret VDI 30 Spaneforderer
Manufacturer: Gildemeister Type: CTX 600 V3 Year of construction: 2000 Control: Heidenhain Orbit diameter above bed: 680 mm Rotation diameter above paddling carriage: 450 mm Plan travel: 320 mm Longitudinal travel: 1097 mm Drive power: 40%/100% ED KW 40/30/2000 Nm torque Speed range from – to: 3.5-2800 rpm Weight approx.: 8700 kg Equipment Axes: X,Z,C axis Powered tools: Yes Tool carrier: VDI 50 12 stations Hollow clamping device: Yes Tailstock: Yes Automatic quill stroke: Yes Quill holder: MK 5 Chip conveyor: Yes - Incl. various tool holders - Incl. driven tool holders - Incl.3 Baking power chuck - 1st shift operation Perfect machine condition. Errors excepted
Inv. Num. : 6136 Type: CTX alpha 5000 Producer: DMG Gildemeister Created: 2008 Parameters: Control system: Siemens 840 Operating hours: 22803 h Switching-on hours: 11505 h Maximum turning length: 500 mm Maximum turning diameter: 200 mm Maximum turning diameter over bed: 500 mm Distance between tips: 780 mm Maximum spindle speed: 6000 1/min Maximum workpiece weight: 45 kg Weight: 4500 kg Equipment: Filtration Bar Loader CNC Spacesaver SS 2500 (2018)
Inv. Num: 5234 Type: SPRINT 20 linear Producer: DMG GILDEMEISTER Generated: 2006 Parameters: Engine hours: 79172 h Switch-on hours: 50648 h Max turning diameter: 20 mm Maximum length travel in the X-axis: 35 mm Maximum travel Z-axis: 80 mm Maximum feed speed Axis X: 40 m/min Maximum feed speed Axis Z: 40 m/min Number of spindles: 2 pieces Maximum main spindle power: 5.5 kW Minimum main spindle speed: 1 1/min Maximum spindle speed: 10000 rpm Axle X2: 230 mm Axis Z2: 180 mm Maximum length travel in the Y-axis: 240 mm Counterspindle power: 3.7 kW Maximum counter spindle speed: 1 1/min Maximum speed of the driven tools: 1000 rpm Lathe length: 2275 mm Lathe width: 1300 mm Height: 1760 mm Weight: 2.6 t Facilities: Rod loader with magazine Conveyor Liquid cooling Technical documentation Full coverage of the work area
19.000 € Description: Axis data: Stroke X1= 65 mm, Y1= 350 mm, Z1= 120 mm, X2= 265 mm, Y2= 326 mm, Z2= 320 mm Max. axis speed, 30 m/min Max. acceleration: 5 m/sec Nominal thurst: 3500 N Automatic bar feeder: Manufacturer: IEMCA , Model: BOSS 545 E Type: 37 LL Year: 2012 S/N: 021218GA03 Bar capacity: diameter 5-45 mm Bar lengths: up to 3700 mm ,serial number: 8086010739B, Read off working hours: 36,625 h, Read off operating hours: 84,202 h, control: Fanuc 310iS, number of places for driven tools: 4 + 4, number of controlled axes: 6, spindle bore: 42 mm, turning speed range: 6,500 rpm, weight approx.: 5,600 kg, dimensions (l x w x h) approx.: 10,000 x 1,650 x 1,950 mm
turning diameter: 315 mmturning length: 555 mmcontrol: Sinumerik 840 D SL Siemensgreates pass round over bed: 650 mmSwing dia. over traverse guideway: 465 mmMain spindle:: Max. rpm: 4.000 min/-1power capacity - main spindel: 17,5 / 12,5 kWmax. Torque: 370 / 280 Nmspindle diameter in front bearing: 130 mmspindle bore: 91 mmmax. bar capacity: 80 mmmax. chucking diameter: 315 mmchucking diameter: 315 mmspindle nose: A2-8 C-Axis: 360 °turret:: number of toolpositions: 12 pos.tool taper: VDI 40 driven statition: 12 posSpindle speed - driven tool stations: max. 4.000 min -1power capacity - driven tool-stations: 4,2 kWmax. Torque: 20 Nmaxis stroke:: x-axis: 267,5 mmy-axis: +/- 60 mmz-axis: 600 mmfeeds:: rapid traverse: 30 m/minTailstock:: tailstock: 500 mmtaper of center: MT tension force: max. 8 kNtotal power requirement: 39 kVAweight of the machine ca.: 5,8 tdimensions of the machine ca ...
With C axis Controller Siemens 840D
