Manufacturer:
(Category: 102-90)
Inv. Num. : 9085 Type: KMX XL 32 Producer: Manurhin Created: 2003 Parameters: Maximum turning length: 330 mm Max. turning diameter: 33 mm Length: 3850 mm Width: 2000 mm Height: 2100 mm Weight: 6000 kg
turning diameter: 320 mmturning length: 500 mmcontrol: Fanuc Oi-TD total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFanuc Oi-TD cnc controlcollet chuck device10-fold revolvertail stockchip conveyorTechnische Daten: / technical detailsmax. Drehdurchmesser / max. turning diameter 320 mmmax. Drehlänge / max. turning length 500 mmX-Weg / X-travel 180 mmZ-Weg / Z-travel 520 mmmax. Drehzahl / max. spindle speed 6000 UpM /rpmAnzahl der Revolverplätze / number of tool places 10 Gewicht ca. / weight ca. 3200 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran spanentransportband De staafaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel.Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions
Control Siemens 828D - ShopTurn Rotary diameter. [mm] 405 Turning length [mm] 956 Main spindle: Lining SAMCHULLY HS-12 (12 inches) Spindle speed (max.) 3,000 rpm Spindle nose A2-8 Motor power (Cont./Max) 18.5 kW / 26 kW Max. turning Ø x turning length 405 mm x 956 mm Tool carrier (X/Z): Number of tool positions 12x BMT65 Max. milling Ø 433 mm Travel (X/Z) 245 mm / 1,040 mm Rapid traverse (X/Z) 24 m/min / 30 m/min Tailstock: Quill Ø 110 mm Quill stroke 100 mm Equipment/accessories: Control SIEMENS 828D - ShopTurn Bed construction 45° inclined bed (cast from one piece) Additional equipment Tool Probe (Tool Setter, swivel) Collision protection turret with Hirth serration Weight 5,600 kg (according to configuration nameplate) Chip Management Chip Conveyor Electrical connection 380 V / 3PH. PE / 50/60 Hz / 42 kVA
Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tooleye Mayfran spaanband De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel.Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions
Lathe M. Ernault Sorma Cholet 550
Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran chiptransporteur De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel.Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions
turning diameter: 1500 mmturning length: 4500 (5500) mmcontrol: Siemens 840 Dsl max. workpiece weight between centres: 6000 kgtotal power requirement: kWweight of the machine ca.: 40 tdimensions of the machine ca.: mCNC machine configured as a 4-way center lathe with full travel over the steady rests and superstructuresZ-axis travel (longitudinal slide) = 5000 mm (6000 mm with TAE3)X-axis travel (transverse cross slide) = 1000 mmY-axis travel (vertical movement) = 350 mmMaximum workpiece diameter = 1500 mmSwing diameter over cross slide = 1500 mmCenter distance = 4500 mm (5500 mm with TAE3)The cross slide and cross slide do not restrict the diameter range due to their lateral positioning on the lathe bed. Therefore, there is no associated diameter restriction over the cross slide/tool carrier.The cross slide unit, including the cross slide superstructure, can travel completely past the ...
Main spindle: Technology: Motor spindle Speed: 4,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar Passage: 76 mm Sub-spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Ejector: Pneumatic Travel in Z: 800 mm Tool carrier I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Tool drive: 5,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 260/100/800 mm Rapid traverse in X/Y/Z: 30/12/30 m/min Tool carrier II (X/Z): Technology: 12-station turret Tool holder: VDI30 Tool drive: 5,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 210/800 mm Rapid traverse in X/Z: 30 m/min Equipment/accessories: Chip management: Chip conveyor Coolant management: IKZ system with paper belt filter and high pressure, 40 bar Raw material feed I: Robot interface prepared Raw Material Feed II: Bar Feeder Interface Prepared Finished part removal ...
turning diameter: 320 mmturning length: 600 mmcontrol: Fanuc Oi-TD spindle bore diameter: 74 mmnumber of controlled axis: 2 turning speed range: 3000 U/minrapid speed: 20 m/minnumber of tapers in turret head: 12 direkttail stock: Ja power requirement: 15 kWweight: 5,0 tdimensions: 3,7 x 1,6 x 2,0 mUsed CNC- Lahte 2 axis- 3 jaw chuck Ø 250 mm- chip conveyor- oil dust collector- Tool presetterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 9065 Type: GLS 200 Producer: GOODWAY Created: 2016 Parameters: Control System: FANUC Series Oi-TF Switch-on hours: 15380 h Hours: 7757 h Max. turning length: 300 mm Grinding diameter: 350 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter over support: 380 mm Maximum spindle speed: 4500 1/min Spindle passage: 65 mm Number of tool head positions: 12 Weight: 3200 kg Equipment: Chuck Tool probe Bar Feeder Grips
turning diameter: 280 mmturning length: 400 mmcontrol: Fanuc 18 T spindle bore diameter: 51 mmnumber of controlled axis: 2 turning speed range: 0 - 4000 U/minrapid speed: 30 m/minnumber of tapers in turret head: 12 VDI 40tail stock: Ja dimensions: 3,9 x 1,6 x 2,1 mweight: 4,0 tweight of the machine ca.: 3,9 tpower requirement: 15 kWUsed CNC- Lahte with box way, 2 axis- 3 jaw chuck Ø 200 mm- chip conveyor- oil dust collectorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 9056 Type: SPRY 40 CNC-D Producer: ZPS Created: 1994, GO 2016 Parameters: Control system: Siemens Sinumeric 840D Maximum turning length: 300 mm Max. turning diameter: 110 mm Maximum main spindle power: 10 kW Spindle bore: 50 mm Max. rod diameter: 40 mm Weight: 2400 kg Equipment: Duplomatic tool head with rotary tools 3 meter pole holder
turning diameter: 1800 mmturning length: 600 mmcontrol: Siemens 6 - Jaw Chuck: ? spindle bore: 130 mmspindle nose: DIN 55027 Größe 11 turning speed range: 1 - 400 U/minmax. torque on the spindle: 9000 total power requirement: 38 / 52 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 6x3x2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 500 mm, 1000 mm, 2500 1/min
Lathe Voest Alpine Steinel WNC 500 S x 1000 Turning diameter 500 mm Turning length: 1000 mm Control system Sinumerik 810 T-GA 2 2 stage gearbox i = 4 Power: 37 KW at 100% ED Max. torque during turning: 1450 Nm Tailstock manual with clamping and coupling Speed max 2500 rpm Electronic handwheel For milling: Hydraulically swivelling servo motor with 720 Nm and max. 18.5 rpm 12-speed disc turret with driven tools max. 3000 rpm at 4 kw Tool holder VDI 40 Many VDI 40 tool holders for internal and external machining as well as driven tools, incl. some tools - e.g. internal turning steels otherwise without tools!
spindle passage: 80 mmmax. turning diameter: 395 mmMax. Turning length: 750 mmcontrol: System TX 8H max. Spindle speed: 3.150 U/min.CNC lathe | TRAUB - TNA 400The machine is in a well-maintained condition.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:TNA400 | TNA-400The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
DMG MORI NRX 2000™ CNC Lathe TECHNICAL FEATURES: Year: 2017 NC Type: MITSUBISHI M730UM Maximum diameter Machinable: 150 [mm] X-axis travel: 100 [mm] Z-axis travel: 220 [mm] X1 Axis Fast Feed Speed: 30000 [mm/min] Fast feed speed X2 axis: 30000 [mm/min] Z1 axis fast feed speed: 30000 [mm/min] Z2 axis fast feed speed: 30000 [mm/min] Spindle Nose: JIS A2-5 Maximum length Machinable Spindle 1: 100 [mm] Maximum length Machinable Spindle 2: 100 [mm] Maximum speed Spindle 1: 6000 [rpm] Maximum speed Spindle 2: 6000 [RPM] Turret Turning Tool Power 1: 1.5 [kW] Turret 2 rotating tool power: 1.2 [kW] Number of posts - Turret 1 : 10 Maximum speed Rotating Tools - Turret 1: 10000 [RPM] Number of posts - Turret 2: 10 Maximum speed Rotating Tools - Turret 2: 10000 [RPM] Installed power: 38 [kVA] Supply voltage: 400 [V] Working time: 12270 [h] Weight: 5700 [Kg] EQUIPMEN ...
spindle passage: 80 mmmax. turning diameter: 460 mmMax. Turning length: 1.000 mmcontrol: System TX 8F max. Spindle speed: 2.800 U/min.CNC lathe | TRAUB - TNA 500The machine is in a well-maintained condition.The machine videos from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:TNA500 | TNA-500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 130 mm, 160 mm, 6000 1/min
CNC lathe ARIX / HUMMER T-42CL + bar loading magazine Robust Nitro + chip conveyor – year of construction 2025 For sale is a modern CNC lathe of the type HUMMER T-42CL (ARIX CNC Machines) including bar loading magazine Robust Nitro. The machine was built in 2025, is in very good condition and is ideal for cost-effective series production. Technical data: Model No.: T-42CL Manufacturer: ARIX CNC Machines (Taiwan) Year of Make: 2025 Spindle speed: up to 6,000 rpm Bar Passage: 42 mm Max. turning diameter: approx. 130 mm Max. turning length: approx. 160 mm Axles: X: 225 mm Z: 235 mm Y: 385 mm Main spindle: Power: 7.5 kW Collet holder: A2-5 Tool Stations: 5 lathe tools + 4 driven tools Total: 8 Lots Machine weight: approx. 3,300 – 3,500 kg Equipment: Bar loading magazine Robust Nitro (automatic material feeding) Live Tooling Suitable for series production ...
swing diameter: 530 mmturning diameter: 150 mmspindle passage: 65 mmcontrol: SIEMENS 840 C travel x1: 175 mmtravel y1: +/- 70 mmtravel z1: 433 mmtravel x2: 175 mmtravel y2: +/- 70 mmtravel z2: 433 mmspindle turning speed range: 38 - 4000 U/minC-axis: 2 x tool turret: 2 x 12 Pos.number of driven tool stations: 2 x 12 tool shaft (cylinder shaft DIN 69880): VDI 30 total power requirement: 33 kWdimensions of machine L x W x H: 3,95 x 2,49 x 2,6 mAccessories: collet fixtures on main spindle and sub spindle, one collet for main spindle and one for sub spindle, various tool holders (for driven tools as well), various spindle reductions, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. bar Ø: 42 mm Max. speed: 4,500 1/min 8-station turret of which 4 are powered Travel X= 110, Y= 50 mm 2. 8-station turret of which 4 are powered Speed driven tools: 6,000 1/min 1 longitudinal carriage 1 vertical slide Pick-up spindle Chip conveyor IEMCA BOSS 545 Bar Feeder Weight 4100 kg
turning diameter: 110 mmturning length: 450 mmcontrol: Siemens total power requirement: kWweight of the machine ca.: 9000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, testing is possible by prior arrangement.
turning diameter: 160 mmturning length: 550 mmcontrol: Siemens total power requirement: kWweight of the machine ca.: 9000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 9029 Type: TURN E65 Producer: EMCO Created: 2008 Parameters: Control system: FANUC Max. turning diameter: 500 mm Maximum turning diameter over bed: 610 mm Maximum length of travel in the X-axis: 210 mm Maximum length of travel in the Y-axis: 40 mm Maximum feed in the Z-axis: 610 mm Weight: 6500 kg
turning diameter: 480 mmturning length: 800 mmcontrol: System TX8F turning diameter over slide: 240 mmspindle passage: 65 mmchuck diameter: 200 mmturning speeds: 4000 U/minpower capacity: 30 kWtotal power requirement: kWweight of the machine ca.: 4,3 tdimensions of the machine ca.: mpowered toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lathe Monforts RNC4 1988 and 1995 Lathe Monforts RNC 5 BJ 1992 Lathes Monforts RNC7 BJ 1992 and 1993
turning diameter: - mmturning length: - mmcontrol: BOSCH CC 200 total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mMovie:https://www.youtube.com/watch?v=lr-NrroeTtAThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464.8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Main spindle Speed spindle rpm: 5.000 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Chip conveyor Part catcher Workarea light Bar Loader RBK 10016 Working time hours Potencial nominal kVA: 67,2 Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Height ...
turning diameter: 330 mmturning length: 669 mmcontrol: Sinumerik 828D total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 828D12-fold revolver Sauter VDI40driven toolsC-axis3-jaw chuckTool Eyepart catcherchip conveyortail stockcoolant device with high pressure pumpbar loading device IemcaTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 600 mmmax. Drehdurchmesser / max. turning diameter 330 mmmax. Drehlänge / max. turning length 669 mmX-Weg / X-travel 260 mmZ-Weg / Z-travel 762 mmDrehzahl / spindle speed 3400 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesmax. Stangendurchmesser / max. bar diameter 75 mmEilgang X / rapid feed X 20 m/minEilgang Z / rapid feed Z 24 m/min.Gewicht der Maschine ca. / weight ca. 5700 kgT ...
The machine is in good technical condition, after prior agreement it is possible to test it. Control unit Hurco Max Turning diameter 254 mm Turning length 340 mm Range over bed 405 mm Range over cross feed 230 mm Length between centers 403 mm Bar capacity 45 mm X-axis movement 177 mm Z-axis movement 355 mm Spindle speed 6000 rpm. Motor power 11 kW
turning diameter: 240 mmturning length: 530 mmcontrol: Siemens 810 D Powerline swing diameter: 560 mmx-travel: 207,5 mmz-travel: 530 mmturning speeds: 6000 U/min: 12 Stk. total power requirement: --- kWweight of the machine ca.: 6,1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control Winmax Turning diameter 335 mm Turning length 550 mm Spindle speed 3000 rpm Tailstock 12-Station Turret with Driven Tools VDI 40 Chip Conveyor, IRCO Short Bar Feeder IRS-RBK 1001 Tool Measurement Parts catcher
turning diameter: 540 mmturning length: 1520 mmcontrol: Fanuc 18i-TB total power requirement: kWweight of the machine ca.: 15500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8997 Type: SKT 100 Producer: KIA Created: 2006 Parameters: Control System: FANUC Series Oi-TB Switch-on hours: 65471 h Hours: 19209 h Max. turning length: 300 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 350 mm Maximum length of travel in the X-axis: 210 mm Maximum feed in the Z-axis: 330 mm Maximum spindle speed: 6000 1/min Spindle taper: Morse 4 Max. rod diameter: 45 mm Lathe chuck diameter: 165 mm Weight: 3800 kg
turning diameter: max. 400 mmturning length: 600 mmcontrol: 840 D Siemensgreates pass round over bed: 500 mmSwing dia. over traverse guideway: 300 mmcentre distance: 615 mmMain spindle:: turning speed range - main spindle: 20 - 6.000 min/-1power capacity - main spindel: 16 kWmax. Torque: 155 Nmmax. usable bar diameter: 65 mmspindle nose: 140H5 C-Axis: 0,001 °Subspindel:: Spindle speed range subspindle: 20 - 6.000 min/-1power capacity - Sub spindle: 7,5 kWmax. Torque: 48 Nmspindle diameter in front bearing: 75 mmspindle bore: 37 mmmax. usable bar diameter: ( - ) mmspindle nose: 140H5 C-Axis: 0,001 °turret:: number of toolpositions: 12 pos.Number of driven toolspositions: 12 pos.Spindle speed - driven tools: max. 5.000 min -1power capacity - driven tools: 3,7 kWmax. Torque: 24 Nmtool taper: VDI 30 Tool dimensions with square shank: 20 x 20 mmaxis stroke:: x-axis: 160 mmy-axis: +/- 32 ...
Inv. Num. : 9002 Type: LB3000EXII MYW800 Producer: OKUMA Created: 2014 Parameters: Control system: OKUMA OSP-P300L CNC Switch-on hours: 65458 h Hours: 36054 h Maximum turning length: 785 mm Max. turning diameter: 480 mm Max. turning diameter: 340 mm Spindle diameter: 80 mm Motor power: 22 kW Minimum spindle speed: 45 1/min Maximum spindle speed: 5000 1/min Travel X: 260 mm Travel Y: 115 mm Travel Z: 510 mm Tool magazine: 12 pieces Length: 3330 mm Width: 1800 mm Height: 2250 mm Weight: 5250 kg Equipment: Baking Collets Axis C Sub-spindle Powered tools OSP-P300L Advanced One Touch CF-M-E FILTERMIST FX4002 Suction High-pressure cooling Grips Tool Holder Reducer insert tube In June 2019, the spindle was repaired due to defective bearings. In June 2025, the U4 control unit was replaced. In October 2025, the M control unit w ...
turning diameter: 250 mmturning length: 400 mmcontrol: Siemens 840 D swing diameter: max. 300 mmworkpiece length - max.: 400 mmtravel -x axis: 280 mmfeed in x - axis: 0,1 - 30 m/minrapid traverse X-axis: 30 m/mintravel -z axis: 1150 mmfeed range Z-direction: 0,1 - 60000 mm/minrapid traverse Z-axis: 60 m/minspindle bearing diameter: 90 mmspindle head DIN 55026 - Size: A6 turning speeds: 1 - 5000 U/mintool turret 12 times: C4 Captototal power requirement: 45 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 7,0 x 5,0 x 3,2 mCNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyorwith chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor.Without coolant system, was connected to central supply.Machine can be inspected under power.The data for this ad ...
Inv. Num. : 8996 Type: KIT 450 Producer: HYUNDAI-KIA Created: 2008 Parameters: Control System: FANUC Series Oi-TC Switch-on hours: 54066 h Hours: 23954 h Max. turning length: 190 mm Max. turning diameter: 165 mm Maximum turning diameter over bed: 530 mm Maximum length of travel in the X-axis: 400 mm Maximum feed in the Z-axis: 250 mm Spindle speeds: 6000 1/min Max. rod diameter: 44 mm Spindle diameter: 52 mm Weight: 2700 kg Equipment: Bar Feeder
turning diameter: 250 mmturning length: 400 mmcontrol: Siemens 840 D swing diameter: max. 300 mmtravel -x axis: 280 mmfeed x-axis: 0,1 - 30.000 mm/minrapid traverse X-axis: 30 m/mintravel -z axis: 1.150 mmFeed z- axis: 0,1 - 60.000 mm / min.rapid traverse Z-axis: 60 m/minspindle bearing diameter: 90 mmspindle head DIN 55026 - Size: A6 turning speeds: 1 - 5.000 U/mintool turret - number of stations: 12 tool taper: Capto C4 total power requirement: 45 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 7,0 x 5,0 x 3,2 mCNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyorwith chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor.Without coolant system, was connected to central supply.Machine can be inspected under power.The data for this ad was cre ...
Inv. Num. : 8995 Type: Masturn MT 550i CNC Producer: Kovosvit Created: 2011 Parameters: Control system: HEIDENHAIN iTNC 530 Max. turning length: 1500 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 350 mm Maximum spindle speed: 3000 1/min Spindle bore: 82 mm Weight: 3400 kg Equipment: Chip conveyor Cutter head (8 positions)
turning diameter: 250 mmturning length: 400 mmcontrol: Siemens 840 D swing diameter: max. 300 mmworkpiece length - max.: 400 mmtravel -x axis: 280 mmfeed in x - axis: 0,1 - 30 m/minrapid traverse X-axis: 30 m/mintravel -z axis: 1150 mmfeed range Z-direction: 0,1 - 60000 mm/minrapid traverse Z-axis: 60 m/minspindle bearing diameter: 90 mmspindle head DIN 55026 - Size: A6 turning speeds: 1 - 5000 U/mintool taper: Capto C4 total power requirement: 45 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 7,0 x 5,0 x 3,2 mCNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyorwith chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor.Without coolant system, was connected to central supply.Machine can be inspected under power.The data for this ad was creat ...
The machine is in good technical condition, after prior agreement it is possible to test it. designed for serial and piece production. It is one of the classic 2-axis CNC lathes (X, Z) with a turret head and is often used in the engineering production of smaller and medium-sized parts. Max. turning diameter: approx. 320 mm Max. turning length: approx. 500 mm Max. diameter above the bed: approx. 500 mm Max. diameter above the slide: approx. 300 mm Spindle Chuck diameter: 210 mm (8") Spindle passage: approx. 52–65 mm Spindle speed: up to 4500 rpm Main motor power: approx. 11–15 kW X-axis: approx. 200 mm Z: approx. 500 mm Rapid traverse: up to 20–24 m/min Turret head 8 or 12 tool positions, possibility of driven tools in the M version Control system Most common: Fanuc 0i-T / Fanuc 21i-T Machine weight approx. 4,000 – 5,000 kg
turning diameter: 370 mmturning length: 424 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in very good technical condition, testing is possible by prior arrangement.
greates pass round over bed: 520 mmswing diameter over bed slide: 480 mmturning length: 3000 mmcontrol: 840 D SIEMENSnumber of tools: 12 Driven tools - quantity: 6 spindle bore: 103 mmc-axis: ja 0weight of the machine ca.: tdimensions of the machine ca.: mScope of delivery of the basic machine:SINUMERIK 840 D3 controlled axesRotation Ø over bed 520 mmTurning Ø over bed slide 480 mmTool carrier with 12 cylindrical shank holders Ø 50 mm1-stage AC main drive, 53 kW, 50 % EDSpeed range 30 - 3000 min-¹Main spindle head size 8Clamping door for clamping deviceschip conveyorTHREE-DIMENSION 3000 mm12 cylindrical shank holders DIN 69880-50x78of which 6 positions can be equipped with driven tools,Power 6 kW at 60 % ED,speed range 20-2500 min-¹2 gear stagesC-AXLESpeed range 0-20 min-¹Max. Angle specification 9999.999°Working range according to work area diagramPOWER CHUCK 3 NHF 315-82 A8FAB ...
The machine is in very good technical condition, testing is possible by prior arrangement.
turning diameter: 150 mmturning length: 1250 mmcontrol: OSP 7000 L total power requirement: 37 kWweight of the machine ca.: 8500 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
