We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Fully functional Traub Lathe Location of the machines: 76661 Philippsburg The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.
used
Fully functional Traub lathe built in 1972 Location of the machines: 76661 Philippsburg The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.
used
CNC Swiss Automatic Lathe with Bar Feeder - Main spindle with C-axis - Holder for driven guide bush max. passage 26 mm - Sub-spindle with C-axis - Workpiece ejection device - Tool carrier at the bottom with 12 driven tool carriers - Tool carrier at the top with 12 driven tool carriers - x3 transverse axis for front apparatus/sub-spindle - Front apparatus 5-way with Z3 carriage - Tapping side processing station - Workpiece removal device - Hinged belt chip conveyor - Coolant system - Setup for deep drilling - Fire protection device for processing with cutting oil - Traub Tool Monitoring TX8i - FMB bar loading magazine
used
CNC Swiss lathe TNL12/7 with bar loading magazine and fire protection equipment for oil processing Control Traub TX8i Structure of the machine: - Turret = 6 driven tool stations - Front apparatus = 4 driven tool stations - Residual apparatus = 3 tools driven stations Main spindle: max. 12,000 1/min Sub-spindle: max. 12,000 1/min Fire protection equipment Bar Feeder Coolant Setup Conveyor Production time: 36150 h
used
Attention: Axle amplifier X3 axle defective and CPU bar loader missing/defective. Production time: 34293 h Spindle runtime: 36396 h Switch-on hours: 55709 h Control Traub TX8i Structure of the machine: - Turret = 6 driven tool stations - Front apparatus = 4 driven tool stations - Residual apparatus = 3 tools driven stations Main spindle: max. 12,000 1/min Sub-spindle: max. 12,000 1/min Fire protection equipment (disabled) Bar Feeder Coolant Setup Conveyor
used
Article number: 22-99-015 Manufacturer: Traub Very good general condition Machine workshop tested Delivery time: Immediate prior sale reserved Year of construction: ca.1984 L x W x H: approx. 800x600x1300mm Weight: approx. 300kg Control: conventional Chamfer diameter from - to: approx. Ø 20-60mm Accessories Support bracket Other accessories on request Price and other technical data on request
used
Dear Ladies and Gentlemen, we would actually have to hand over two machines in a timely manner (presumably. end of the year). Hardinge RS65 Year of construction 2008 Control: GE Fanuc 161 Hours: 45918 Traub TNC 65 Year of manufacture 1996 Fully automated with gantry loader Hours: 48839
used
TRAUB TNS 65 D / 5 - Axis CNC Lathe -COMPLETE TECHNICAL DATA see "Data sheets" -Control TX8 D -Built in 1994 -C - Axis -Rod passage 65mm -Hydraulic bar loading magazine -Various powered tools -Tool holder -Three-jaw chuck -Documentation
used
Traub TNK 36, Year of manufacture 2012, TX 8i S control, Absolute measuring system, Coolant device 7 bar, Breuning loading magazine 7m, Spindle insert tubes, Sub-spindle, Revolver 12-speed,
used
Traub TNX 65 - 42, Year of manufacture 2008, Control TX 8i - S, Bar machining up to 65 mm, 3 turrets 10 speed with Y axis, all turret stations driven, Sub-spindle, 2 x C axis 0.001°, Conveyor Cooling lubricant cleaning system, workpiece handling, without loading magazine, a lot of accessories,
used
- Ø over bed: 360 mm - Ø over carriage 160 mm - Max. spindle speed: 3,150 1/min - Revolver with 8 stations - Travel distance: X= 205, Z= 850 mm - Dimensions LxWxH: 3300 x 2100 x 1800 mm - Weight: 3,500 kg
used
Equipment of the machine: - Powered tools, used - Filter system -Conveyor - Collets, used - Control TX8i Technical data: - Main and counter spindle - 1 turret with 12 stations, all powered - Clamping diameter: 36 mm - Spindle speed 6300 rpm - Tool holder front: 5 - Tool holder back: 5 - Feed Y1 axle: 20 mm - Feed X-axis: 50 mm - Feed Z-axis: 100 mm - X3 axis - Z4 axle
used
Key data: 360 mm, 800 mm, 5000 1/min
High Quality CNC Lathe Traub TND 360 We offer a precision CNC lathe from the renowned Traub brand. The Traub TND 360 was manufactured in 1981 and allows for efficient and accurate machining, which meets current requirements Technical details: - Diameter: 360 mm - Turning length: 800 mm - Tailstock: MT 3, hydraulically operated - Revolver: 8 stations - Power consumption: 380V, 32 kW This CNC lathe stands out for its reliability and precision, allowing versatile machining of workpieces. The machine needs an inspection due to an unknown problem in the control system. It is also in very good condition and has been regularly maintained. The price is net, free to load. The Traub TND 360 can be viewed by prior appointment. If you have any questions, just call or write. 016096679844 Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Technical specificat ...
used
Key data: 340 mm, 750 mm
Traub TNA 400 Y, Built in 1997, Control TX 8 H, Turning length 750 mm, Swivel Ø 340 mm, Revolver 12-speed, Conveyor Tailstock C axis, Addressed. Tools Y axis +/- 50 mm, good condition, approx. 20,000 spindle hours,
used
General: Year of construction 2006 Control Traub TX8i Travel X 50 mm Z 100 mm Working spindle max. 6,300 rpm Rod passage 36 mm Torque 21/32 Nm Other equipment and accessories: High-pressure system with belt filter 30 bar Conveyor Bar feeder FMB turbo 3-36-3200-C Preparation of the extraction device
used
Traub TNL 12 - 7, Built in 2002, Control TX 8i, C axis main spindle, Revolver 1 with attached Tools Revolver 2 with attacked Tools Multi-edge turning turret 2, Front apparatus with tool drive, C axis counter spindle, Rear drilling station with attached tools and X4 axis, Loading magazine, Conveyor Belt filter system, refrigerant plant,
used
Two drawer cabinets with roller drawers incl. accessories for CNC lathe Traub TNS30 are offered. Accessories e.g. Traub Adjusting Microscope Traub Adjustment Tool VDI30 Soft top jaws approx. 82 set (3 jaws each) approx. 5 driven tools (partially disassembled) approx. 80 tool holders Approx. 72 collets approx. 32 collets Lot of parting chisel Lot of turning chisels Post Milling Cutter Dial gauge Lot of centering drill bits Post of interchangeable tips for moving tips Lot of Inserts Lot of spare parts Traub Without the pictured 3-jaw chuck Cabinet Height 1m, Width 70cm Depth 70cm The photos do not show the complete scope of delivery. More photos on request or by visiting on site. Listing without guarantee! Sale price
used
Traub TND 300, Built in 2005, Control TX 8 H , Travel X/Z210/450 mm, Spindle passage 65 mm, max. swivel Ø 277 mm, max. turning length 450 mm, Main drive 11 KW, Spindle speed up to 4,000 rpm, Revolver 8-speed - Makes Ø 30 mm, Tailstock Quill stroke 70 mm, Conveyor Suction Bandpass filter High-pressure cooling,
used
Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg
used
- TRAUB control TX 8F - Spindle passage 42 mm - Working spindle speed: 40 - 4,000 rpm - 4 piercing slides: stroke 60 mm - 8-fold revolver - High-pressure pump 25 bar - Backside machining (2 spindles) - Bar feeder (3 m) -Conveyor
used
Used / cleaned CNC lathe with different clamping axes. Tools on the moulds are not included. Optical tool measurement. Optional instruction manual available.
used
Machine Details Stock number 1105-03756 Machine type CNC turning and milling center Brand TRAUB Type TNA 300 Year of construction 1996 Control type CNC Control Traub TX 8 H Storage location warehouse Country of origin Germany Delivery time by arrangement Freight base EXW Technical details Turning length 450 mm Control Traub TX 8F Turning diameter above the paddling carriage 275 mm Turning diameter over bed 400 mm Speed range 4000 rpm Number of tools 12 pcs. Sledge path plan 210 mm Sledge path lengthwise 450 mm Quill diameter 75 mm Quill stroke 125 mm Total power requirement 22 kW Machine weight ca. 3.2 t Space requirement approx. 3 x 2.00 x 2.10 m Information 3 AXIS MACHINE WITH LIVE TOOLS incl. chip conveyor 12-cavity tool turret SAUTER with 12-cavity tool turret VDI 30 MIT DRIVEN TOOL HOLDERS AND C AXIS Towing tailstock with quill Three-jaw power chuc ...
used
CNC automatic lathe Traub TNL 32-7 • Version TNL32/TNL32K alternating mode • Control TX8i-s • Main spindle passage 32 mm, with C-axis • Counter spindle incl. partial hollow stress • Revolver top X/Y/Z/H axis: 10 shots dual drive • Revolver bottom X/Y/Z/H axis: 9 shots total drive; Counter spindle sep. Drive • RAPP 8-fold; Total drive 3 tools IK • Workpiece deflection unit with linear gripper • Coolant supply 3 bar • Coolant supply 8 bar • Hinge belt chip conveyor, discharge height 1000mm • Glass scale X-axis turret top/bottom • Compact belt filter for cooling lubricant: filter fineness approx. 30-40 μm • Bar loading magazine FMB LSK 38, for rods 3.2 m (original price at that time 340.000,- €uro)
used
CNC Control Traub System TX 8D C-axis/ Driven tools Bar feeder Stamag DN42 Collector of the finished parts Chip conveyor Internal liquid cooling Very good condition Max. bar diameter 42 mm Turning length 220 mm Hydraulic chuck Chuck- max. turning dia. 140 mm Max. turning diameter 140 mm Max. turning diameter over bed 390 mm Spindle boring 42 mm Number of turret heads- 3 -1st turret 12 tools -2nd turret 12 tools -3rd turret 4 tool Tool holders VDI 30 X axis travel 200 mm Z axis travel 300 mm Spindle speed 5600 rpm Max. bar length 4200 mm Max. working bars in dia. 42- 7 Total power requirement 34 kW Interlocking cover Total dimensions: 7400x1900x2400 mm Weight 4500 kg
used
Post driven tools from a Traub CNC lathe VDI 40 As well as some measuring geraete for Traub Rest according to photos Special price
used
Hollow spindle opening diameter: 42mm, rotational speed: 56-5600/min, controls: SYSTEM TX 8F, length: 2498mm, width: 1990mm, height: 2005mm, weight: 3.8t, operational hours: 38,274h, with driven tools, various tool holders VDI30, high pressure pump, the Drive Baumüller BUH-4-55-6-002 shows an error message and has to be overhauled.
used
Spindle clearance: 42mm, turning diameter over face slide/bed: 170/400mm, speed: 56-5600rpm, control: TX 8F. With four driven tools, various tool holders VDI30, high-pressure pump 15bar, measuring arm for tool measurement. Operating hours: 38,274h, Baumüller drive BUH-4-55-6-002 produces an error message and must be overhauled. On-site inspection is possible.
used
turning diameter: 220 mm turning length: 400 mm control: HeidenHain TX8i serial number: 5004576 Control: Stunden ca. 17.000 : 12-Fach tail stock: ja chip conveyor: ja kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Article: Programme-controlled automatic lathe Manufacturer: Traub Type: TF60 / 140 Yob: 1978 Bar automat Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
used
Description: Spindle clearance of the work spindle 65 mm , Standard collet chuck 66 mm , maximum clamping diameter 60 mm , Quick traverse X-axis 15 m/min , Rapid traverse Z-axis 30 m/min , Quick traverse Y-axis 6 m/min Including counter spindle , maximum speed 4000 rpm maximum clamping diameter 65 mm , Power 11 kW , rapid traverse 30 m/min Feed path 520 mm ,  , Including: Three-jaw chuck, diameter approx. 160 mm , Chip conveyor , LNS HYDROBAR MINI ,- SPRINT bar feeder , BOSCH hydraulic unit , turning diameter: 110 mm, Turning length max.: 450 mm, serial number: 189, x-motion: 140 mm, y-motion: +/- 35 mm, z-motion: 450 mm, control: TRAUB SYESTEM TX 8F, toolchanger positions: 20, number of places for driven tools: 20, number of controlled axes: 4, spindle bore: 65 mm, turning speed range: 4,000 rpm, total powe ...