Manufacturer:
(Category: 106)
Key data: 400 t, 1000 mm
LAUFFER PRESSES hydraulic press model VA 400 Capacity 400 tons Table 700x1000 mm Possible to inspect under power
Key data: 600 t, 800 mm, 650 mm
LCM Taiwan, 600 tons hydraulic press New in 12/2014 Table 800x800 mm Stroke 0-650 mm adjustable full specifications attached Possible to inspect under power
Key data: 250 t, 800 mm, 650 mm
LCM Taiwan, 250 tons hydraulic press Possible to inspect under power New in 2014 Table 800x800 mm Stroke 0-650 adjustable
Excellent condition - Fully operational - Loading / Transport possible! • CNC hydraulic press brake • Total installed power 12.50 KW • Maximum bending force 1300 KN (132 T) • Maximum pressure 300 Bar • Maximum working length 3140 mm • Maximum distance between uprights 2700 mm • Throat depth 420 mm • Maximum stroke 200 mm • Table width 90 mm • Approach speed: 1 - 100 mm/sec • Working speed: 1 - 10 mm/sec • Return speed: 1 - 100 mm/sec • AMNC control • Various accessories are included • Transport dimensions 5000 x 2060 x 2850 mm
: neu : ca. 12 Wochen ab Auftrags : Türkei : 18200 €: 349.44 €: 100 to: fix : 1500 mm: 300 mm: 1520 mm: 680 mm: 10 mm/s: 5 mm/s: 6 mm: 500x1520 mm: 100 mm: 190 mm: 2630 mm: 1000 mm: 2275 mm: 2500 kg2 guidingsbig upper tool holder and table with t-slotsupper and lower pressbrake toolmanometerrapid down move with automtic change to working speedpiston stops in every position2 hand operating panelTisch höhenverstellbaraccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2 complete precision press systems are offered. Press force: 220kN, stroke: 100/12mm, operating pressure: 3/6bar, tool holder X/Y: approx. 350mm/300mm, safety distance: 355mm, overrun time: 0.07s, control system SCHMIDT PressControl 500: control type: PRC 500, incl. operating panel with display and keypad, two-hand control according to EN 574 Type III B. Accessories: machine frame with integrated safety device BGR 500 inspection, machine weight: 800kg, inspection possible by arrangement.
A high-speed press is offered. Press force: 38t, stroke rate: 60/300 per minute. Stroke: 6mm-50mm, ram adjustment: 40mm, infeed height: 90mm. Table surface X/Y: 550mm/440mm. Soundproof enclosure, accessories: external control cabinet, tool area lighting, vibration dampers. Total weight: approx. 2800kg, overall dimensions X/Y/Z: 1650mm/1450mm/2250mm. Inspection possible by arrangement.
A hydraulic universal press is offered. Press force: 75t, stroke: 250mm, table surface X/Y: approx. 600mm/500mm, safety distance: 107mm, overrun distance: 18mm. Equipment: manually adjustable stroke limitation (top/bottom), integrated ejector with draw cushion control, analog pressure gauge up to 400bar. Safety device: SICK safety light curtain for the working area. Total weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 1300mm/1800mm/2900mm. Inspection possible by arrangement.
Key data: 20 t
20T Durendus C-Stand Assembly & Small Batch Press For sale is a C-column assembly and small series press from the manufacturer DURENDUS with a maximum press force of 20 T. The machine has a table size of 700 × 920 mm, a maximum installation height of 550 mm and a stroke of 400 mm, making it suitable for assembly work, small series production, press-fit work and straightening processes in industrial use. Technical data + information: C-Stand Assembly & Small Batch Press – 20 T – 700 × 920 mm General information - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 5–20 T (adjustable) - Max. installation height: 550 mm - Table size: 700 × 920 mm - Crimping head: Ø 100 mm - Table height from the ground: 1,000 mm - Overall dimensions (WxDxH): 900 × 900 × 2,340 mm - Total weight: approx. 1,200 kg - T-slots: DIN 650 – 22 mm or accordin ...
: neu : ca. 4 Monate ab Auftragse : Italien : 132500 €: 2504.25 €: 200 to: 500 mm: 1250x1000 mm: 600 mm: 25 mm/s: 3,5 mm/s: 7.5 kW: 1550 mm: 1300 mm: 2700 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manualOPTIONS: Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of ...
pressure: 20 ttotal power requirement: 20 kWweight of the machine ca.: 5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 17700 €: 339.84 €: 100 to: fix : 300 mm: 680 mm: 1520 mm: 8 mm/s: 5 mm/s: 10 mm/s: 500x1520 mm: 100 mm: 190 mm: 2630 mm: 1000 mm: 2350 mm: 2500 kg2 guidingsupper plate with T-slotstable plate with T-Slotsmanometerrapid down move with automtic changeto working speedpiston stops in every position2 hand controltable height adjustableaccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS PLC SIEMENS SIMATIC PANEL PRESS FORCES total force (nominal): 500 toPRESS TABLE table surface (left-right): 2800 mm table surface (front-back): 1400 mmSLIDE stroke: 450 mmSLIDE (HYDR. PRESS) return force: 38 toTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 850 mmDIMENSIONS / WEIGHTS total weight approx.: 175000 kg
pressure: 25 tstroke: 7 - 62 mmno. of strokes: 120-600 Hub/mintotal power requirement: 4 kWweight of the machine ca.: 2,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 315 tstroke: 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 tthroat: 400 mmstroke: 355 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 tthroat: 250 mmstroke: 400 mmtable surface area: 600x480 mmram surface: Ø135 mmtable height: 980 mmweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2025 : 070145 : prompt, Zwischenverkauf v : Türkei : 44500 €: 849.95 €: 1 : 40 to: 4 mm: 630 mm: 450 mm: 160 mm: 3 - 75 mm: 154 1/min: 420 x 275 mm: 8 : 75 mm: 40 mm: 230 mm: 293 mm: 4 kW: 1174 mm: 1540 mm: 2200 mm: 2850 kg8-fold ram guide2-hand control panel and foot pedalAutomatic central lubricationFront light guardVibration padsUser Manual in German with CE Declaration of ConformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 450 mmmax. module: 4 mminternal dia. - min.: 100 mminternal dia. - max.: 300 mmMaximum permissible peeling wheel diameter: 175 mmDiameter of the installation area: 125 mmslide travel X-axis: 350 mmslide travel Z-axis: 300 mmslide travel Z-axis: 440 mmLargest swivel range of the peeling head: ±25 Gradworkpiece table outer diameter: 570 mmWorkpiece table – Maximum permissible load: 5 kNFeed - X: 12000 mm/minFeed - Y: 5000 mm/minFeed - Z: 8570 mm/minTools speed: 0-3000 U/minWorkpiece table speed: 0-1500 U/minvoltage: 400 VControl: weight of the machine ca.: 11 tdimensions of the machine ca.: 5,85 x 8,3 x 3,8 mTechnical specifications: - CNC Siemens 840 sl - Swivel grab travel: 180 degrees Fluids: - Hydraulic: 150 l - Coolant: 850 l - Engine and hydraulic cooling: 100 l - Grease lubrication: 2 kg The data for this ad was create ...
pressure: 160 tchamfer lenght: 3200 mmControl: CYBELEC CybTouch 15 PS weight of the machine ca.: 14.000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 5 t, 600 mm
Length 0.64 m Width 0.84 m Height 2.20 m Weight 250 kg Color: Blue Press pads Mandrels
A hydraulic single-column C-frame press Müller is available. Press force: 63t, stroke: 560mm, throat depth: 325mm, installation height: 700mm, table dimensions X/Y: 640mm/640mm, ram surface: 560mm/560mm, machine dimensions X/Y/Z: approx. 2000mm/1200mm/3100mm, weight: approx. 7500kg. The machine has a motor malfunction. An on-site inspection is possible.
Toggle Press • Working height adjustable by simply loosening the clamping screws on the stand • Fine working height adjustment with HK 800 = millimetre-precise adjustment of the press head to the desired working height. The fine adjustment is done forcibly in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring Pressure 500 kN Stroke 40 mm Projection 73 mm Working height from up to 60 - 150 mm Table surface 115 x 70 mm Machine weight approx. 10 kg Condition: never used / new (5) Auction-ID: A7-46642-136
Slide Dimensions X-Y (mm) 450 x 300 Stroke (mm) 400 Strokes type fixed Stroke per minute 150 Features no extractor cylinder Screw diameter 200 mm
750 € 
