Manufacturer:
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.

Manufacturer:
(Category: 106-455)

LVD 1
SMD 1
presses / CNC Bending Presses
date: 16.11.2022 add to watchlist
approved
dealer
item-No.: 158072186
New in: 2007

used

check Seller: AWM - SERWIS JERZY GUZOWSKI
Location: Land-pl

add to watchlist

Press force: 130T Stroke: 350 mm 4 axis Weight:8860 kg

presses / CNC Bending Presses
date: 03.06.2023 add to watchlist
approved
dealer
item-No.: 161328462
New in: 2000

used

check Seller: A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus Land-de

add to watchlist

pressure: 150 tchamfer lenght: 3100 mmdistance between columns: 2550 mmthroat: 310 mmstroke: 230 mmajustment speed: 90,0 mm/secworking feed: 8,0 mm/secreturn speed: 75,0 mm/secdayligth: 510 mmtable width: 200 mmwork height max.: 870 mmoil volume: 180 ltr.Control: DELEM total power requirement: 11,0 kWweight of the machine ca.: 8230 kg.range L-W-H: 3540 x 1500 x 2330 mmFurnishing:- hydraulic CNC press brake- with DELEM CNC control DA 65- electrical backgauge with 2x manually adjustable stop fingers- swiveling operation, mounting side on the right- Upper tool holder, system A with upper wedge crowning- Split upper deer foot tool 85 °- New split Multi V die 85 ° (16/22/35/50 mm), in the die shoe- 2x front support arms- Freely movable 2-hand foot control- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / CNC Bending Presses
date: 03.06.2023 add to watchlist
approved
dealer
item-No.: 161568869
New in: 2000

used

Location: Land-de

add to watchlist

pressure: 150 tchamfer lenght: 3100 mmdistance between columns: 2550 mmthroat: 310 mmstroke: 230 mmajustment speed: 90,0 mm/secworking feed: 8,0 mm/secreturn speed: 75,0 mm/secdayligth: 510 mmtable width: 200 mmwork height max.: 870 mmoil volume: 180 ltr.Control: DELEM total power requirement: 11,0 kWweight of the machine ca.: 8230 kg.range L-W-H: 3540 x 1500 x 2330 mmFurnishing:- hydraulic CNC press brake- with DELEM CNC control DA 65- electrical backgauge with 2x manually adjustable stop fingers- swiveling operation, mounting side on the right- Upper tool holder, system A with upper wedge crowning- Split upper deer foot tool 85 °- New split Multi V die 85 ° (16/22/35/50 mm), in the die shoe- 2x front support arms- Freely movable 2-hand foot control- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / CNC Bending Presses
date: 10.04.2023 add to watchlist
approved
dealer
item-No.: 159505043
New in: 1993

used

check Seller:
Location: 22941 Hammoor Land-de
Price: 19.500 € add to watchlist

Electronic-hydraulic press brake DARLEY, Model EHP1100.31/25 Machine No. 121599, built in 1993, with all associated tools

presses / CNC Bending Presses
date: 03.06.2023 add to watchlist
approved
dealer
item-No.: 157300920
New in: 1996

used

check Seller: A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus Land-de

add to watchlist

pressure: 50,0 tchamfer lenght: 2050 mmdistance between columns: 1550 mmdayligth: 320 mmstroke: 120 mmajustment speed: 100 mm/secworking feed: 10,0 mm/secreturn speed: 75,0 mm/seccolumn arm: 250 mmwork height max.: 900 mmtable width: 100 mmconnected load: 7,2 kWoil volume: 90 ltr.weight: 2600 kgrange L-W-H: 2250 x 1100 x 2050 mmFurnishing:- DELEM CNC control model DA 24e- swiveling control panel- electrical backgauge (X axis)- 2x manually adjustable stop fingers lateral + vertical adjustment (R + Z axis)- 2x front support arms- SICK light barrier in front- 2 hand / foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / CNC Bending Presses
date: 07.03.2023 add to watchlist
approved
dealer
item-No.: 160991016
New in: 1988

used

check Seller: DenTool LTD
Location: 0 Naestved Land-dk

add to watchlist

Stock number: 3768 CNC PRESS BRAKE Manufacturer: DONEWELL, Type: 100 x 3000 Machine NO.: 588 12 2348, Year of construction: 1988 Specifications: Size bending length 3100 mm Size Printing capacity 100 tons Stroke length 215 mm Stand passage 2600 mm Projection 265 mm Bending speed 420 mm/min Hydraulic. CNC control Cybelec EURO III Fabr. Controlled in Y1-Y2-X Achen Program-controlled backgauge. X - 500 mm Accessories: Segment-split upper tool 3100 mm Multi bottom tool 3100 mm Operating manuals Length: 1300 mm, Height: 2450 mm, Width: 3100 mm, Weight: 7000 kg

presses / CNC Bending Presses
date: 03.06.2023 add to watchlist
approved
dealer
item-No.: 158345549

new

check Seller: A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus Land-de

add to watchlist

pressure: 400 tchamfer lenght: 4100 mmdistance between columns: 3550 mmcolumn arm: 510 mmram stroke speed: 110 mm/secreturn speed: 130 mm/secwork speed: 8,0 mm/secwork stroke: 375 mmdayligth: 650 mmoil volume: 400 ltr.table height: 1000 mmvoltage: 400 Voltback stop - adjustable: 800 mmtable width: 240 mmtotal power requirement: 30,0 kWweight: 26530 kgrange L-W-H: 5450 x 2650 x 3470 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot tool ...

presses / CNC Bending Presses
date: 03.06.2023 add to watchlist
approved
dealer
item-No.: 160889985
New in: 2022

new

check Seller: VOLZ Werkzeugmaschinen GmbH & Co.KG
Location: Witten / Germany Land-de

add to watchlist

: 150 t: 3100 mm: 2600 mm: 400 mm: 270 mm: 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / CNC Bending Presses
date: 03.06.2023 add to watchlist
approved
dealer
item-No.: 161045837
New in: 2023

new

check Seller: VOLZ Werkzeugmaschinen GmbH & Co.KG
Location: Witten / Germany Land-de

add to watchlist

: 250 t: 3100 mm: 2600 mm: 400 mm: 270 mm: 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / CNC Bending Presses
date: 03.06.2023 add to watchlist
approved
dealer
item-No.: 158801418
New in: 2008

used

check Seller: A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus Land-de

add to watchlist

pressure: 220 tchamfer lenght: 4050 mmdistance between columns: 3600 mmstroke of upper beam: 265 mmthroat: 450 mmdayligth: 530 mmworking feed: 10,0 mm/secajustment speed: 160 mm/secreturn speed: 140 mm/secControl: ModEva 10S work height max.: 900 mmtable width: 104 mmback stop - adjustable: ca. 750 mmoil volume: 250 ltotal power requirement: 22,0 kWweight: 14750 kgrange L-W-H: 5250 x 1770 x 3000 mm New price ~ 95.000 eurosFurnishing:- CYBELEC numerical CNC control, model ModEva 10S 10 color screen Windows operating system external hard drive interface USB connection point Fast operation with Quick Cursor- pivoting control, front right- controlled axes : Y1 + Y2 + X + R + CNC crowning- CNC electric backgauge (X axis) Travel speed 500 mm/sec.- CNC electric height adjustment (R axis) Travel speed 350 mm/sec. Travel range 250 mm- Back gauge with ball screw + linear guides- 4x manually adjust ...

presses / CNC Bending Presses
date: 03.06.2023 add to watchlist
approved
dealer
item-No.: 158048823
New in: 2001

used

check Seller: A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus Land-de

add to watchlist

pressure: 110 tchamfer lenght: 3050 mmdistance between columns: 2600 mmthroat: 400 mmdayligth: 500 mmstroke: 300 mmajustment speed: 130 mm/secworking feed: 12,0 mm/secreturn speed: 115 mm/sectable width: 120 mmwork height max.: 970 mm0: 245 baroil volume: 250 ltr.engine output: 15,0 kWweight: 10.000 kg very good condition ()Furnishing:- LVD CADMANN - CNC control- Swivel control unit, left front- controlled axes : Y1 - Y2 - X - R - Z1- 1x manually adjustable stop finger- LVD CNC electric crowning- LAZER-SAFE front safety device, height adjustable- hydraulic upper tool clamping- hydraulic lower tool clamping- Mobile LVD control panel- Free-moving double foot switch- rear protective device (protective grille/door)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / CNC Bending Presses
date: 02.06.2023 add to watchlist
approved
dealer
item-No.: 135880324
New in: 2006

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 49.320 € add to watchlist

The CNC press brake SMD PBH 110-3100-4C produced in 2006 is offered in a set with the ANTIL TWISTER F5 robot. Technical parameters : - manufacturer: SMD - type: PBH 110-3100-4C - year of production: 2006 - control: CNC CYBELEC ModEva 10 - overworked time: about 20,000 man-hours - pressure force: 110 tons - bending width: 3100 mm - maximum working speed: 10 mm / s - table width: 60 mm - table height: 960 mm - stroke: 465 mm - frame spacing: 2600 mm - throat: 410 mm - power supply: electric - 11.5 KW, 400 V three phases - oil tank capacity: 250 l - dimensions of the press: 3960 × 2045 × 3650 mm - total weight: 9500 kg Processing on a 3 m table and palletizing of finished details on 3 europallets.

presses / CNC Bending Presses
date: 03.06.2023 add to watchlist
approved
dealer
item-No.: 155415322
New in: 1996

used

check Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Location: Metzingen Land-de

add to watchlist

pressure: 85 tchamfer lenght: 2000 mmdistance between columns: 1750 mmControl: TRUMPF Delem DA 65T total power requirement: 10 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: mT R U M P F (Germany)CNC - Controlled Hydraulic Press BrakeModel TRUMABEND V 85, year 1996 Serial No. 88 31 52 ______________________________________________________________________ ____________Pressure, max. 85 toWorking width, max. 2.050 mmWorking width between columns 1,750 mmSide daylight of each column 410 mmMax. distance between upper and lower tool holder w/o tools 350 mmAdjustment of upper tool holder approx. 300 mmTable width approx  ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information