used Hydraulic Presses for sale

Furnace 1200 temperature 10 - 1200 Celsius 2 heating zones 100kW auto door PLC Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel Ziel des Spannungsarmglühens ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeu ...

Manufacturer: AP&T Lagan Type: FMC-2500 MC12 1010 Table size: lower: 1000 x 1000 mm; upper: 800 x 800 mm (sender table: 1000 x 800 mm) Clearance: 1000 x 700 mm Stroke: 500 mm Press force: 2500 kN - 250 ton Voltage: 400 V Electric power: 45 kW Hydraulic oil capacity: ~1.000 l Weight: ~11.000 Kg Manufacturing year: 1992 Operating hours: 19.470 h

Manufacturer: AP&T Lagan Type: FMC-2500 MC12 1010 S Table size: lower: 1000 x 1000 mm; upper: 800 x 800 mm (sender table: 1000 x 800 mm) Clearance: 1000 x 700 mm Stroke: 500 mm Press force: 2500 kN - 250 t Voltage: 400 V Electric power: 45 kW Hydraulic oil capacity: ~1.000 l Weight: ~11.000 Kg Manufacturing year: 1991 Operating hours: 13.296 h Condition: Not tested, Disassembled from a working factory

Nominal pressing force ... 400t Table dimensions... 3100x1500mm Plunger Dimensions ... 3290x1200mm Max. ram stroke ... 460mm Number of strokes ... 10-25/min Control Fagor ... CNC 8055 M Machine weight ... 115000kg The machine is in good condition, possible to test under electricity.

Description: Machine number: M1875 Pressing force: 100 to Overtravel: 10 mm Overrun time: 120 mm Safety distance: 175 mm Table dimensions: 650 x 650 mm Hole diameter: approx. 100 mmApprox. Onsite Dimension. (l x w x h): 1,600 x 1,500 x 2,900 mm, weight approx.: 5,000 kg

Description: Serial number: M1509 Pressing force: 60 to Operating voltage: 380 V Frequency: 50 Hz Table dimensions: 500 x 500 mm Hole diameter: approx. 100 mmApprox. Onsite Dimension. (l x w x h): 1,600 x 1,500 x 3,000 mm, weight approx.: 5,000 kg

Description: Technical data top closing piston: Pressing force: max. 30 to Retraction force: max. 30 to Max. stroke: 300 mm Technical data lower plunger: Pressing force: max. 60 to Retraction force: 40 to Stroke: max. 120 mm Table dimensions: 400 x 400 mm The machine was completely rebuilt in 2003 Incl. digital operationApprox. Onsite Dimension. (l x w x h): 1,600 x 1,500 x 3,000 mm, weight approx.: 5,000 kg

Description: Machine number: M3267 Technical data top closing piston: Max. pressing force: 60 to Retraction force: 30 to Stroke: max. 300 mm Technical data lower plunger: Max. pressing force: 60 to Retraction force: max. 40 to Max. stroke: 120 mm Table dimensions: 500 x 500 mm Hole diameter: approx. 100 mmApprox. Onsite Dimension. (l x w x h): 1,600 x 1,500 x 3,000 mm, weight approx.: 5,000 kg

Description: shrink range 15-63mm max opening 75mm pressure 53.5 Mpa force 500 T 3000W 380V 5585Approx. Onsite Dimension. (l x w x h): 770 x 530 x 1,320 mm, weight approx.: 280 kg

Key data: 75 t

Fast Runner - Force: 75 kN - Stroke: 150 mm - Installation height: 500 mm - Projection: 330 mm - Express lowering speed: 400 mm/s - Working speed from partial load: 40 mm/s - Working speed at full load: 18 mm/s - Return stroke speed: 400 mm/s - Drive power: 22 kW - Diarrhea hole in the table: 250 x 180 mm - Breakthrough press frame to the rear: 300 x 200 mm - Table height above floor: 820 mm - Dimensions LxWxH: 1600 x 1500 x 3000 mm - Weight: 8,900 kg

pressure: 6 tdistance between columns: - mmstroke: - mmtotal power requirement: - kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1 x 1 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Press should be rebuilt, which is why the table elevation and other clamping plates are included (not mounted) Soiled and partially rusty due to prolonged storage not testedMax. pressing force: 10 to, Approx. Onsite Dimension. (l x w x h): 1,300 x 800 x 2,100 mm, weight approx.: 1,500 kg

pressure: 200 tdistance between columns: - mmstroke: - mmtable surface area: 2000 x 800 mmtotal power requirement: kWweight of the machine ca.: 31 tdimensions of the machine ca.: mDrive power 55 / 4 kWTracking travel 28 mmSafety distance 155 mmTracking travel time 97 msOil filling 1200 litersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tdistance between columns: 550 mmstroke: 150 mmtotal power requirement: 11 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 3 y 3 x 2,5 mNo. 4105Hydraulic pressCompressive force max. 600 kNRam stroke 150 mmWeight approx. 4500 kgTable 500 x 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nominal force 100 t Stroke - 250 mm motor 3 kW more info on request

Inv. Num. : 7246 Type: HCFP Producer: Hidroliksan Created: 2022 Parameters: Compressive force: 100 t Table length: 1400 mm Table width: 1000 mm Stroke length: 700 mm Distance between frame walls: 1100 mm Machine height: 3100 mm Machine length: 1600 mm Machine width: 1600 mm Machine weight: 4000 kg

Offer 20202 Specifications: - max. pressing force 35 t - Projection to the middle of the ram 240 mm - Working height adjustable with hand crank 540 to 940 mm - 2 Hand control - Protective shield enclosure with light barrier - Material - Slide-in device - Pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - Drive 400 V / 15.5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

HUNGER Maschinenbau GmbH Press cylinder for a hydraulic metal scrap press / scrap press shear (Metso-Lindemann) fully assembled and ready for installation Piston diameter 260mm Piston rod diameter 210mm Stroke 8910mm Outer diameter of the housing 335 mm Cylinder head diameter 365mm Total length 10,635 mm Working pressure cylinder head 180 bar Working pressure cylinder base 225 bar Test pressure cylinder head 250 bar Test pressure cylinder base 315 bar Maximum pressure force 1195 kN Maximum tensile force 332 kN Medium hydraulic oil ISO VG46 Installation position horizontal

PRESS DESIGN  drive system: hydraulic   frame design: C-frame, single sided PRESS FORCES  total force (nominal): 12 toSLIDE  stroke: 200 mmELECTRICAL SPECIFICATIONS  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 1000 kg

pressure: 63 tdistance between columns: 360 mmstroke: 400 mmweight of the machine ca.: 4 tdimensions of the machine ca.: 1.8x1.6x2.7 mwww.marcels-maschinen.chThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kaiser Hydraulic Press Press 80 Tons Working area passage 1.6m Machine dimensions: 3x1.6x2.2m Weight: 2.6 tons Printing capacity: 80 tons Height working range: 420 mm Table inner surface 1x1 meters

Description: Serial number: 15.62.1.20 Pressing force: 15 to Table dimensions: 400 x 350 mm Hole diameter: approx. 100 mmApprox. Onsite Dimension. (l x w x h): 1,100 x 1,000 x 2,000 mm, weight approx.: 1,500 kg

Description: Serial number: 1961 Pressing force: 15 to Table dimensions: 400 x 350 mm Hole diameter: approx. 100 mmApprox. Onsite Dimension. (l x w x h): 1,100 x 1,000 x 2,000 mm, weight approx.: 1,500 kg

Description: Machine number: 1990 Pressing force: 15 to Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 25 A Table dimensions: 400 x 350 mm Hole diameter: approx. 100 mmApprox. Onsite Dimension. (l x w x h): 1,100 x 1,000 x 2,000 mm, weight approx.: 1,500 kg

Description: Operating voltage: 380 V Control voltage: 220 V Frequency: 50 Hz Rated current: 35 A Max. pressing force: 500 kN Table dimensions: 520 x 300 mmApprox. Onsite Dimension. (l x w x h): 1,600 x 1,500 x 2,800 mm, weight approx.: 3,000 kg

Description: Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 35 A Pressing force: 50 to Table dimensions: 520 x 300 mmApprox. Onsite Dimension. (l x w x h): 1,600 x 1,500 x 2,800 mm, weight approx.: 3,000 kg

Description: Pressing force: 50 to Table dimensions: 520 x 300 mmApprox. Onsite Dimension. (l x w x h): 1,600 x 1,500 x 2,400 mm, weight approx.: 3,000 kg

Description: Pressing force: 50 to Table dimensions: 520 x 300 mmApprox. Onsite Dimension. (l x w x h): 1,600 x 1,500 x 2,400 mm, weight approx.: 3,000 kg

Description: Machine number: 00273541 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated current: 125 A Pressing force: 2000 kN Control system: SIEMENS SIMATIC OP 37 Table dimensions: 800 x 370 mm Attention: the machine can be transported on a normal standard truckApprox. Onsite Dimension. (l x w x h): 5,000 x 3,000 x 3,800 mm, weight approx.: 9,000 kg

Laepple Hydraulic Press 750 T Single Action – Table 3000 x 1900mm Excellent condition 4 pcs available

We have for sale 4 pcs of Hydraulic Press 750 T single action table 3000 x 1900 mm Very good condition Under power

Max. pressing force 60 to Installation height 500 mm Stroke of the press ram 300 mm Passage between the columns 430 mm Pusher bore 40D H7 Clamping table 430 x 310 mm

CONTROLS  electronic controls PRESS DESIGN  frame design: 4 column PRESS FORCES  total force (nominal): 400 toPRESS TABLE  table surface (left-right): 1200 mm  table surface (front-back): 800 mmSLIDE  slide force: 400 to  table surface (left-right): 1200 mm  table surface (front-back): 800 mm  stroke: 500 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 290 mm/s  working velocity min.: 25 mm/s  return velocity max.: 290 mm/s  return force: 35 toTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1100 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2255 mm  space requirements -front/back-: 1660 mm  t ...

CONTROLS  PLC SIEMENS S5 95U PRESS DESIGN  drive system: hydraulic   openings in uprights: yes PRESS FORCES  total force (nominal): 350 toPRESS TABLE  table surface (left-right): 1600 mm  table surface (front-back): 1400 mmSLIDE  stroke: 1200 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 250 mm/s  working velocity min.: 14 mm/s  working velocity max.: 50 mm/sTOOL ASSEMBLY DIMENSIONS  distance table - slide max.: 1250 mm  distance between columns (H-frame): 1650 mm  passline opening (free passage in side columns): 630 mmDIMENSIONS / WEIGHTS  height above floor level: 4300 mm  height under floor level: 1000 mm  total weight approx.: 24000 kgATTACHMENTS (PRESSES)  European CE standards: yes

CONTROLS  PLC SIEMENS S5 95U PRESS DESIGN  drive system: hydraulic   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   table cushion: yes PRESS FORCES  total force (nominal): 650 toPRESS TABLE  table surface (left-right): 3000 mm  table surface (front-back): 1800 mmSLIDE  slide force: 630 to  table surface (left-right): 3000 mm  table surface (front-back): 1800 mm  stroke: 1000 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 200 mm/s  working velocity min.: 7 mm/s  working velocity max.: 15 mm/s  return velocity max.: 120 mm/s  return force: 65 toDIE CUSHION (TABLE CUSHION)  cushion force: 250 to  stroke: 400 mm  cushion plate surface (l ...

closing pressure: 4360 kNtable-size: 730 x 730 mmcontrol: B+R Industrieelektronik draw back pressure: 190 kNajustment speed: max. 60 mm/secreturn speed: max. 90 mm/secdaylight between the columns: 900 mm= vulcanizing press with vertical closing unit, with form removal and form separation deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1 t, 110 mm

Hydraulic Fine Press, MATRA, , up to 1000kg, Table: 260x200mm, Radius 110, Foot or hand release, without UVV Fully functional, can be visited under power

Key data: 250 t

Catalog No. : 7693 Type: CD 250 Producer: Mecamaq Made in: 2022 Characteristic: Pressing force: 250 t Maximum stroke: 250 mm Machine weight: 3200 kg

Description:  ,  ,  , serial number 1063 compressive force 12 t total stroke 100 mm power stroke 15 mm Max. pressing force: 12 to, Approx. Onsite Dimension. (l x w x h): 600 x 500 x 1,800 mm, weight approx.: 120 kg, stroke: 100 mm

Inv. Num. : 6050 Type: 30T Producer: MEYER Produced: 1982 Parameters: Compressive force: 30 t Distance between frame walls: 300 mm Lifting height: 200 mm

Hydraulic Press 1300 T force very good condition Under power

Hydraulic Press 800 T Very good condition Under power

Muller Press, hydraulic press force 1000 T, double action, table 2600 x 2250 mm 2 pcs available

pressure: 2 tdistance between columns: - mmstroke: ? mmthroat: ? mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mhydraulic press 2tDrive: 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tdistance between columns: 0 mmstroke: 160 mmtable surface area: 630 x 500 mmdayligth: 400 mmtotal power requirement: kWweight of the machine ca.: 5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1200 t, 4000 mm, 700 mm

Manufacturer | Manufacturer: ONA - Pres Description | Name: PYZT 1200 Year of construction | Year of manufacture: 1990 Adjustable pressing force | Adjustable pressing force: 1200 - 12000 kN (1200 t) max. lifting height | max. Lifting height: 700 mm Table / Plunger Size | Table / ram size: 1600 x 4000 mm

Nominal pressing force: 250 tons Travel: 600mm Daylight: 1200mm Table size: 1000 x 1000mm Hydraulic rejector 63 tons Weight: 8 tons

Used hydraulic press 400 tons. Table size: 1200 x 1200mm. Daylight 1400mm. Travel 700mm. Weight: 16 tons

PONAR ŻYWIEC PHM 160 D hydraulic press manufactured in Poland in 1990 is used for machining metal and processing plastics (e.g. polofen or melamine) or rubber. The machine characterised by its high reliability, performs precise machining with a force of 160 tonnes in manual mode as well as in semi-automatic or automatic mode, thanks to its being equipped with time relays. The gantry press is also equipped with, among others, a hydraulic ejector with a force of 60 tonnes and two temperature controllers for the upper and lower parts of the heating plate. The offered machine was purchased from the university and has never worked during typical production. The total weight of the machine is 4000 kg. Technical parameters of the PONAR ŻYWIEC PHM 160 D press - maximum pressing force: 160 t (1600 kN) - ejector force: 60 t (600 kN) - working table surface (L x W): 800 x 800 mm - pressin ...

Hydraulic press ZHO700N Manufacturer: Presshydraulika Year: 2015 Nominal pressing force ... 700t Clamping table surface ... 2500x1500mm Plunger stroke ... 500mm Installation height ... 1200mm Pestle dimensions ... 2400x1000mm Distance between stand ... 2500mm Control Siemens Force of the lower ejection ... 234t Stroke of the lower ejection ... 200mm Machine weight ... 52000kg L x W x H ... 5150x2870x4710mm The machine is in good condition, possible to test under power.