Manufacturer:
(Category: 106)
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 6500 €: 125.45 €: 70 to: fix : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 TL: 1 speed 4 mm/s, single-hand control with lever € 6.500,00 PSS 70 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 7.200,00 PSS 70 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 7.900,00 PSS 70: same as PSS 70 NC but with stroke 500 mm € 8.700,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 37600 €: 718.16 €: 40 to: 1550 mm: X und Y Achse : 160 mm: 1260 mm: 320 mm: 380 mm: hydraulisch : 90 mm/s: 10 mm/s: 600 mm: 845 mm: 100 mm: 120 l: 5,5 kW: 2000 mm: 1600 mm: 2235 mm: 3450 kgNC control for immersion depth (Y) and back gauge (X)synchronization control by means of a torsion shaftsheet support armslight barriersintermediate pieces for the upper tool clampingdie seat and diedie seat with 4 V openingssplit upper tool, slightly cranked, dividedpedaluser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT:laser safety device FiesslerNC controlled R axismanual crowning tablemotorized crowning tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Italien : 52000 €: 982.8 €: 150 to: fix : 1250 mm: 500 mm: 700 mm: 1500 mm: 20 mm/s: 10 mm/s: 3 mm/s: 1200x700 mm: 1250x400 mm: 2400 mm: 1200 mm: 2800 mm: 5200 kgHydraulic multifunction workshop press for pressing and straightening and optional bendingVersion A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPUVersion S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stopStandardmodel for pressing and straightening: table with t-sloats and straightening punchOPTIONS:Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support armsMobile truck for quick assembly/disassembly of bending unitSiemens controlPressure switchHeat exchangerPiece counterTimerPlate supports for the rear sideSafety light guardAL ...
: gebraucht : 2024 : 7319 : prompt, Zwischenverkauf v : Türkei : 6900 €: 1 : 120 to: horizontal verschiebbar : 400 mm: 900 mm: 1200 mm: 5,8 mm/s: 9.5 mm/s: 1200 x 400 mm: 4 kW: 1900 mm: 1000 mm: 2450 mm: 1250 kgwith horizontally sliding cylindermotorhydraulic with additional hand pumpHeight adjustable tableOil Pressure manometerOPTION:1 pair of V-block € 540,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 7300 €: 140.89 €: 70 to: horizontal verschiebbar : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 M TL: 1 speed 4 mm/s, single-hand control with lever € 7.300,00 PSS 70 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 8.000,00 PSS 70 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 8.700,00 PSS 70 M: same as PSS 70 M NC but with stroke 500 mm € 9.500,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 tstroke: 500 mmtable:: 1000 - 800 feed down: 150 -280 mm/secfeed under pressure: 10 - 26 mm/secfeed up: 180 - 300 mm/sectable height over floor: 750 mmtotal power requirement: 22 kWweight of the machine ca.: 7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offered is a hydraulic four-column press. Column spacing: 570mm, table size: 392 × 238mm, ram force (holding): 3500kN, ram stroke (holding): 50mm, ram force (separating): 2500kN, ram stroke (separating): 100mm, installation height: 553mm, cutting impact stroke: 20mm, working speed: max. 30mm/s, control: PLC. Equipped with pump unit, oil cooler (3kW), dust protection for upper cylinder. Weight: approx. 13000kg, overall dimensions X/Y/Z: approx. 1290mm/860mm/3250mm. Inspection possible by arrangement.
Max. pressing force: 25 kN Convertible to: 16 kN Max. working stroke: 25.3/60 mm Table size: 150 x 200 mm Diarrhea hole in the table: 15 mm Stroke adjustment: 290 mm Space requirement: 800 x 580 x 650 mm Weight: 51 kg
Equipment: - With associated hydraulic power unit - Unit of measurement - Control cabinets Information: - Net weight: 28,000 kg - Hydraulic power unit: 2,000 kg - Total weight: 30,000 kg - Hammer price: without loading the machine
This high-speed precision stamping press, manufactured in 1987, delivers a maximum pressing force of 80 tons (800 kN) and is designed for demanding progressive-tool applications. With an operating range of 100–1000 strokes per minute, it combines high productivity with exceptional process stability. The machine features adjustable stroke lengths from 16 to 63 mm, a ram adjustment of 76 mm, and supports tools up to 970 mm width. A Bruderer BBV 202/120 strip feeder is included, allowing strip widths up to 202 mm and feed pitches up to 120 mm, ensuring precise material handling. The soundproof cabin is not included in the offer, but it can be purchased separately. We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners. Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 – 1000 SPM Main voltage: 40 ...
FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With Automatic Strip Feeder BBV 300/200 600 kN | 100–800 spm | Fully automatic | Top-tier Swiss quality Technical Specifications Nominal force: 600 kN Stroke rate: 100–800 strokes per minute Max. feed length: 200 mm. Year: Unknown (No ID Plate) Tested under power: 2025 Drive power: 30 Hp Control voltage: 24V AC Power connection: 440VAC / 50Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 /51 / 58 / 64 / 70 / 76 mm Shut/Ram height adjustment: 80 mm Max tool installation width: 620 mm Strip pass width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max strip width: 300 mm Max feeding pitch: 200 mm Max material thickness: 6 mm Feeding angle: 180 Deg Machine footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Feeder BBV 300 – fully synchronized mechanical strip feeder system ...
pressure: 3,3 bei 6bar tdayligth: 250 mmstroke: 70 mmwork stroke: 10 mmtable surface area: 220x190 mmthroat: 150 mmweight of the machine ca.: 350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 tstroke: 300 mmdaylight between the columns: 700 mmdayligth: 850 mm: 140 mmdiameter of piston: 60 mmtable surface area: 700 x 390 mmweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,2 x 0,8 x 2,2 mWorkshop Press- Movable cylinder- 2 support prisms- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 28.0 tchamfer lenght: 1050 mmdistance between columns: 890 mmthroat: 200 mmstroke: 200 mmdayligth: 325 mmback stop - adjustable: 500 mmworking feed: 8.0 - 10.0 mm/secreturn speed: 35.0 mm/secback stop - adjustable: 0 - 370 mmControl: CYBELEC total power requirement: 4.75 KWweight: 3250 kgrange L-W-H: 1595 x 1390 x 2020 mm Very good / well-maintained condition () new price in 2012 ... approx. 36.000 Euro special price on request The machine was in continuous use in a test areaand as a result has only very few operating hours !- in checked conditions - machinevideo - https://www.youtube.com/watch?v=2LsTlpSaEuEEquipment:- CNC electro-hydraulic press brake- CNC control CYBELEC ModEva 15PAC Large 15 touch display Workpiece creation simply by hand in 2D thanks to the TouchProfile function Intuitive and interactive programming Clearly arranged keyboard Clear and concise menu pages- CN ...
: neu : 2024 : 7306 : prompt, Zwischenverkauf v : Italien : 11800 €: 205.44 €: 1 : 10700 €: 50 to: horizontal verschiebbar : 350 mm: 900 mm: 900 mm: max. 9 mm/s: 0,75 kW: 1700 mm: 700 mm: 2100 mm: 720 kg: 550 mmThe hydraulic movement of the piston is controlled by a handwheel,which enables very sensitive and precise positioning.One-handed operation is possible thanks to the working speed of less than 10 mm/s.Very suitable for straightening and pressing work.The cylinder can be moved sideway by handwheel (only ",M", versions)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Italien : 13500 €: 259.2 €: 70 to: fix : 350 mm: 900 mm: 1050 mm: max. 9 mm/s: 2 kW: 1900 mm: 850 mm: 2250 mm: 1030 kgThe hydraulic movement of the piston is controlled by a handwheel,which enables very sensitive and precise positioning.One-handed operation is possible thanks to the working speed of less than 10 mm/s.Very suitable for straightening and pressing work.The cylinder can be moved sideway by handwheel (only ",M", versions)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 190000 €: 3591 €: 300 to: 500 mm: 5.000 x 3.050 mm: 700 mm: 20 mm/s: 2 mm/s: 4000 mm: 5000 mm: 2600 mm: 18000 kg: horizontal verschiebbar : 3050 mm: 2.200 mm: 3.600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 218000 €: 400 to: 500 mm: 4.000 x 2.550 mm: 700 mm: 20 mm/s: 2 mm/s: 4000 mm: 4000 mm: 2600 mm: 20500 kg: horizontal verschiebbar : 2550 mm: 1.800 mm: 2.900 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 258000 €: 400 to: 500 mm: 5.000 x 3.050 mm: 700 mm: 20 mm/s: 2 mm/s: 4500 mm: 5000 mm: 2600 mm: 24000 kg: horizontal verschiebbar : 3050 mm: 2.200 mm: 3.600 mmHorizontal verschiebbarer Zylinder2.200 mmHydraulisch beweglicher Ständer: 3.600 mmBedienung über Handhebel sowie BedienpanelTisch mit integriertem Zylinder zum anheben des WerkstücksAusrüstung gemäß CE Vorschriften Betriebsanleitung in DEUTSCH und ENGLISCH(Symbolfoto)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 70300 €: 1328.67 €: 100 to: 4.5 mm: 700 mm: 1000 mm: 210 mm: 1 - 132 mm: 58 1/min: 6 : 90 mm: 60 mm: 300 mm: 445 mm: 7.5 kW: 1650 mm: 1545 mm: 3011 mm: 7000 kgWelded steel construction body frameCrankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precisionSnBz-12 quality bronze to bearings, grinded for min surface resistanceRam supported from 6 sidesPneumatic counter-balancing of the ram7", touchscreenGears in oil bathPneumatic clutch-brake combinationPLC control for safetyPhotocell light barriersMotorized slide adjustableMechanical overload fuseTwo hand and foot pedal controlAdjustable stroke (inverter)automatic centrallubricationMachine and equipment in conformity with CE-regulationsOPTIONS: vibration pads € 192,00 bolster plate € 2.580,00The data for this ad was created with ModulMWS - the software solution ...
Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 kN (20 T). Speed range: 100 – 1800 spm. Year of manufacture: 1996. Hours under power: 51574. Feed BBV 101/75 on the left-hand side. Max. strip width: 125 mm. Max. feed pitch: 85 mm. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm. Ram height adjustment: 51 mm. Dimensions of the clamping plate: 510 x 400 mm. Bed opening: 400 x 160 mm. Max. distance of the mold width between the columns: 410 mm. Max. strip passage width: 260 mm. Connected load: 51 kVA. Power 400 V 50 Hz. Control voltage: 24 V. Machine dimensions: H 2540 x W 1661 x D 855 mm. Machine weight: approx. 3100 kg. Control cabinet and control system. Including all original technical documentation. Machine is now under power. Sound cabin sold separately, not included in machine price.
Key data: 242 t
This is a 242 Ton x 12ft and deep 16" throat depth with 5 axis machine with auto crowning, a good variety of dies and punches including 2 bolsters and a nice 4way. Segment acute punches and dies also available with this machine. It is clean and fully operational. Machine is wired 208 3 phase.
General Specifications Nominal Force: 16,000 kN (1,600 metric tons) Total Machine Weight: 48,250 kg (48.25 metric tons) Work Space and Stroke Parameters Slide (Ram) Stroke: 180 mm Maximum Distance Between Bed and Slide (Shut Height): 1,160 mm (at bottom dead center) Slide Adjustment: 20 mm Bed (Table) Dimensions: 1,000 mm (width) x 1,250 mm (length) Performance and Electrical Parameters Continuous Stroke Rate: 25 min (25 strokes per minute) Main Drive Motor Power: 61 kW Overall Dimensions Length: 2,275 mm Width: 2,600 mm Height: 5,170 mm This specialized equipment is intended for accurate three-dimensional stamping, mintage, calibrating and extrusion of parts from sheet and graded metal
Press height 140 mm Press force 70 kN (7 t) Hydropneumatic actuator Compressed air connection 7 bar Air consumption per work stroke 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm Weight 550 kg
: neu : ca. 12 Wochen ab Auftrags : Türkei : 7700 €: 148.61 €: 80 to: horizontal verschiebbar : 250 mm: 1040 mm: 865 mm: 200x120 mm: 5 mm/s: 10 mm/s: 1710 mm: 700 mm: 2100 mm: 835 kghorizontal adjustable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2026 : 070168 : prompt, Zwischenverkauf v : Türkei : 10900 €: 209.28 €: 1 : 150 to: horizontal verschiebbar : 300 mm: 1070 mm: 280x200 mm: 5 mm/s: 10 mm/s: 2110 mm: 1000 mm: 2480 mm: 1870 kghorizontal adjustable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 172500 €: 3260.25 €: 300 to: 500 mm: 1250x1000 mm: 600 mm: 22 mm/s: 2 mm/s: 7.5 kW: 1750 mm: 1500 mm: 2800 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manualOPTIONS: Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of Lo ...
: neu : ca. 12 Wochen ab Auftrags : Türkei : 160 to: 400 mm: 1000x680 mm: 1000x740 mm: 765 mm: 250 mm/s: 10-20 mm/s: 22 kW: 2400 mm: 1525 mm: 3900 mm: 10500 kgNC control with touchscreen8-fold ram guidetable and ram with T-slots2 hand operationpressure adjustmentstroke adjustmentdie cushioncentral lubrication systemlight guarduser manual in German or Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 86300 €: 1631.07 €: 150 to: 300 mm: 950x650 mm: 1200x750 mm: 550 mm: 100 mm/s: 5,5 mm/s: 165 mm/s: 11 kW: 2200 mm: 2200 mm: 3250 mm: 8200 kg4-pillar guidetable and ram with T-slotsmanual stroke adjustment via cam switchmanual and automatic operationfront light barriersaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 65000 €: 1228.5 €: 35 to: 500 mm: 800x500 mm: 600 mm: 125 mm/s: 9 mm/s: 68 mm/s: 4 kW: 1100 mm: 1100 mm: 2300 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
7.499 € 
