used Eccentric Presses for sale

Compressive force 10 tons, front shaft on the flywheel - Machine frame made of steel, in the Base with insulation material in the hollow body - Shaft made of alloy steel - Pneumatic brake clutch combination - Pneumatic system consists of Pressure accumulator, pressesSafety valve, filter, Double-block solenoid valve with dynamic control, pressure switch - Automatic central lubrication with adjustable oil dosing - mechanical cam switchgear with brake angle display - Protective devices made of aluminium profile, fully electrically protected - Control with PLC and PILZ safety module - Welded steel plunger with oil recovery plate (only T10 standard) - mechanical plunger release - mechanical cam switchgear with crank angle display - Programmable stroke counter - Two-hand operation and with Foot pedal only with the safety doors closed - Protective device made of aluminium p ...

Compressive force 105 tons, transverse shaft on flywheel with wheel attachment - Machine frame made of steel, Im Base with insulation material in the hollow body - Shaft made of alloy steel, shafts made of steel in an oil bath - Pneumatic brake clutch combination - Pneumatic system consists of Pressure accumulator, pressesSafety valve, filter, Double-block solenoid valve with dynamic control, pressure switch - Automatic central lubrication with adjustable oil dosage - hydraulic unlocking at Overload - Weight balancing cylinder of the Pestle - Mechanical plunger release + adjustment - Pre-lay gears in the oil bath - mechanical cam switchgear with brake angle display - Protective devices made of aluminium profile with Plexiglas, completely closed with 2 hinged doors, electric secured - Control with PLC and PILZ safety module - Programmable stroke counter - Two-hand o ...

Compressive force 130 tons, transverse shaft on flywheel with wheel attachment - Machine frame made of steel, Im Base with insulation material in the hollow body - Shaft made of alloy steel, shafts made of steel in an oil bath - Pneumatic brake clutch combination - Pneumatic system consists of Pressure accumulator, pressesSafety valve, filter, Double-block solenoid valve with dynamic control, pressure switch - Automatic central lubrication with adjustable oil dosage - hydraulic unlocking at Overload - Weight balancing cylinder of the Pestle - Mechanical plunger release + adjustment - Pre-lay gears in the oil bath - mechanical cam switchgear with brake angle display - Protective devices made of aluminium profile with Plexiglas, completely closed with 2 hinged doors, electric secured - Control with PLC and PILZ safety module - Programmable stroke counter - Two-hand o ...

Compressive force 20 tons, front shaft on the flywheel - Machine frame made of steel, in the Base with insulation material in the hollow body - Shaft made of alloy steel - Pneumatic brake clutch combination - Pneumatic system consists of Pressure accumulator, pressesSafety valve, filter, Double-block solenoid valve with dynamic control, pressure switch - Automatic central lubrication with adjustable oil dosing - mechanical cam switchgear with brake angle display - Protective devices made of aluminium profile, fully electrically protected - Control with PLC and PILZ safety module - Welded steel plunger with oil recovery plate (only T10 standard) - mechanical plunger release - mechanical cam switchgear with crank angle display - Programmable stroke counter - Two-hand operation and with Foot pedal only with the safety doors closed - Protective device made of aluminium p ...

Compressive force 45 tons, transverse shaft on the flywheel - Machine frame made of steel, in the base with insulation material in the hollow body - Shaft made of alloy steel - Pneumatic brake clutch combination - Pneumatic system consists of pressure accumulator, press safety valve, filter, Double-block solenoid valve with dynamic control, pressure switch - Automatic central lubrication with adjustable oil dosage - Hydraulic unlocking in case of overload - Weight balancing cylinder of the Pestle - Mechanical plunger release - Weight compensation cylinder of the Stö- ßels - mechanical cam switchgear with Brake angle indicator - Protective devices made of aluminium profile, fully electrically protected - Control with PLC and PILZ safety module - Programmable stroke counter - Two-hand operation and with foot pedal only when the safety doors are closed - Protective de ...

Compressive force 55 tons, transverse shaft on flywheel - Machine frame made of steel, Im Base with insulation material in the hollow body - Shaft made of alloy steel, shafts made of steel in an oil bath - Pneumatic brake clutch combination - Pneumatic system consists of Pressure accumulator, pressesSafety valve, filter, Double-block solenoid valve with dynamic control, pressure switch - Automatic central lubrication with adjustable oil dosage - hydraulic unlocking at Overload - Weight balancing cylinder of the Pestle - Mechanical plunger release + adjustment - Pre-lay gears in the oil bath - mechanical cam switchgear with brake angle display - Protective devices made of aluminium profile with Plexiglas, completely closed with 2 hinged doors, electric secured - Control with PLC and PILZ safety module - Programmable stroke counter - Two-hand operation and with foot  ...

Compressive force 80 tons, transverse shaft on flywheel with wheel attachment - Machine frame made of steel, Im Base with insulation material in the hollow body - Shaft made of alloy steel, shafts made of steel in an oil bath - Pneumatic brake clutch combination - Pneumatic system consists of Pressure accumulator, pressesSafety valve, filter, Double-block solenoid valve with dynamic control, pressure switch - Automatic central lubrication with adjustable oil dosage - hydraulic unlocking at Overload - Weight balancing cylinder of the Pestle - Mechanical plunger release + adjustment - Pre-lay gears in the oil bath - mechanical cam switchgear with brake angle display - Protective devices made of aluminium profile with Plexiglas, completely closed with 2 hinged doors, electric secured - Control with PLC and PILZ safety module - Programmable stroke counter - Two-hand op ...

The press is in good condition Can be demonstrated at any time

Description: - serial no.: 8313 - press power: 100 t - adjustable stroke: 20 – 125 mm - adjustment of ram: 60 mm - table dimensions: 830 x 580 mmweight approx.: 5,000 kg, dimensions (l x w x h) approx.: 1,900 x 1,200 x 2,500 mm

Overall Size: 1400x1300x2300 mm Work space: 200x200x150 mm

Eccentric C Press Nominal force : 400KN Dataplus 200 control Stroke rate: 30 - 150 rpm, stroke length: 8 - 100mm, ram adjustment: 110mm, Projection: 265mm, Max. tool dimensions: 400x315, Installation height: 335mm Plunger area: 400x315mm, table: 710x500mm. To be visited under power !

Pressure capacity: 8000 kg Maximum cutting area - 200 mm2 for material strength 40 kg / mm2 Horizontal radius 200 mm Clearance between the side walls 160 mm Fixed hub 35 mm Pin hole in the Stossel 38 x 60 mm Adjustability of the Stossels 70 mm Weight of 400 kg of the Presse Operating instructions The machine is located in the new value. State, probably never in use. Control actuator Stober

Small eccentric press make BMW type TP 3Machine -No: 60301724 Year of construction 1964Max. Press force: 3.0 tTable size: 200 x 160 mmBear size: 80 x 60 mmDiarrhea hole in the table: 80 mmDrive power: 0.37 kWWeight approx: 134 kgOutside dimensions approx: 700 x 350 x 750 mmWith- 2-hand release- Footswitch- Underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure: 3500 kNdistance between columns: . mmstroke: 400 mmstrokes - infinitely variable: 15-25 Hub/minram surface: 2050 x 1150 x 885 mmtable surface area: 2120 x 1220 mmMotor Capacity: 45 kWtotal power requirement: kWweight of the machine ca.: 70 tdimensions of the machine ca.: 3120 x 2450 x 7000 mrebuild in 2017The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  PLC PRESS DESIGN  drive system: eccentric / crank   frame design: C-frame, single sided   number of suspensions: 1 PRESS FORCES  total force (nominal): 200 toSLIDE (MECHAN. PRESS)  slide adjustment: 120 mm  autom. Slide adjustment: yes   stroke min.: 20 mm  stroke max.: 200 mm  stroke rate (max.): 45 /min  hydraulic overload protection: yes DIE CUSHION (TABLE CUSHION)  number of cushions: 1 TOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 510 mmELECTRICAL SPECIFICATIONS  mains voltage: 380 VDIMENSIONS / WEIGHTS  space requirements -left/right-: 1900 mm  space requirements -front/back-: 2250 mm  height above floor level: 3850 mm  total weight approx.: 16500 kgATTACHMENTS (PRES ...

Description: - fabrication no.: P4365658 - press power standard: 12 t - press power max.: 170 t - stroke adjustment: 70 mm - number of strokes: 140 - table dimensions: 450 x 430 mmweight approx.: 300 kg, dimensions (l x w x h) approx.: 800 x 700 x 1,700 mm

Description: eccentric press pressure 35 t Stroke 8 - 100mm Table size 575 x 510 mm Number of strokes 110 strokes/min Total power requirement 2.0 kW Recess in the table 205 x 170 mmweight approx.: 1,450 kg, dimensions (l x w x h) approx.: 1,200 x 700 x 2,300 mm

Description: With table height adjustment and foot switch pressure 25 t Stroke 100mm Table size 530 x 390 mm Number of strokes 120 strokes/min Machine weight approx. 1,2 t Space requirement approx. 0,8 x 0,7 x 2,1 mweight approx.: 1,200 kg, dimensions (l x w x h) approx.: 800 x 700 x 2,100 mm

: ja weight of the machine ca.: 9,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eccentric Press Brand Ebu Type EP15 Table size 400x430mm Max pressure 15 000kg Table height adjustment Table passage D160mm Stroke adjustment 4-70mm Ram bore 40mm Projection 200mm Max distance table-tappet 320mm Single/Duration Stroke Shield Flywheel D600mm 400V 1.0kW Machine weight ca. 870 kg The purchase price is net. Can be viewed and tested in our warehouse. Delivery is possible at an additional cost. All information without guarantee!

No. 4929: 1 gebr. Eccentric press 22 - 26 to Fabr. EBU, type 25, with stroke number 130 min-1 Arb.-Ber.: Stroke adjustment 80 mm,

Multi Punching machine Fabr. EDEL type ALM 35/1700Fabr. -No: 19704-1265Punching force: 35 tWorking length: 1800 mmTable width: 500 mmEngine power: 3 hpWith- welded all-steel construction- wide Fußausrückung- Longitudinal T-slots in the tablewithout tools (the tool must be made especially for the respective work)usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make EDELHOFF type AZR / H638997 built in 1988Max. Press force: 63 tStroke adjustment: 10 - 90 mmRam adjustment: 55 mmRam strokes: 70 hpM.Table size: 800 x 800 mmDrive power: 4.0 kWWith- large table- 2 damping cylinders- Two-hand release- hydraulic clutch- Additional brakeused, in first-class conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make EDELHOFF type DEPSR 63Year of construction 1980Technical specifications:Printing capacity: 63 tSlide adjustment: 100 mmStroke adjustment: 60 mmStrokes: 150 HpM.Drive power: 5.5 kWWeight approx: 5500 kgWith- BVK 422 feed unit Feed max. 200 mm Band width max. 200 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine type: Eccentric press Manufacturer: GRÖTZINGER Model: 15 t Built: 1965 Condition: good Offer type: used machine Technical data: Pressure force: 15.0 t Extension: 120 mm Table: 460 x 255 mm Installation height: 250 mm Drive: 1.6 kW Remark: infinitely variable speed adjustment Weight: 750 kg The machine is in a good and ready-to-use condition and can be visited and demonstrated by us. We would be happy if our offer finds your interest.

: Hans Schoen NH65 pressure: 65 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: high speed press serial number: 212557 pressing force: 1250 KN passage: diameter 50 mm speed range: 50-300 r/min stroke adjustment: 0-100 mm distance between columns: 650 mm and 2450 mm  , Please note! press is built about 600 mm into the feed  , incl. soundproof housing: size 4500x5700x3600 mm  ,Max. pressing force: 125 to, stroke: 5-101 mm, total power requirement: 22 kW, weight approx.: 10,000 kg, dimensions (l x w x h) approx.: 2,900 x 1,300 x 3,700 mm

Eccentric press make HEILBRONN type EPT 6Fabr. -No: 4869, built in 1986Technical specifications:Pressure force: 6.3 tThroat: 130 mmTable size: 320 x 240 mmThrough hole in the table: 80 mmTable height: 800 mmMax. Installation height: 155 mmRam surface: 128 x 180 mmSlide adjustment: 30 mmStroke adjustment: 6 - 60 mmStroke rate: 180 H / minDrive power: 0.5 kWDimensions approx: 1000 x 1000 x 1800 mm mmWeight about: 500 kgWith- flywheel drive- Two-handed disengagement- Manual inlays 11062/11064- foot switch- Two-hand and single stroke- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Description: Machn. no 105614 In General: Pressure capacity: 1.000 kN Stroke: 8-100 mm Number of strokes: 60 Ramsurface: 560 x 400 mm Power: 7,5 kW Clampingsurface: 850 x 700 mm see also PDF file Transportdimensions: 2.400 x 1.400 x 2.600 mm, ca. 8.000 kgstroke: 60 mm, weight approx.: 8,000 kg, dimensions (l x w x h) approx.: 1,400 x 2,400 x 2,600 mm

Rotary indexing table with 12 stations Automatic ejector three pressing stages Pressure capacity 1,000 KN Stroke 12-120 mm Stroke rate 30-60 1/min Plunger adjustment 80 mm Total weight 9,500 kg

Eccentric press type REPV 30 - Height: 200 cm - Width: 80 cm - Depth: 120 cm - Pressure load: 30 t - Projection: 180 mm - Stroke: 80 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Eccentric press make HELMERDING type EL 35 BCom.-No: 77218 Masch.-No: 5182 year of construction 1977Technical specifications:Pressure capacity: 35 tStroke adjustment: 12 - 80 mmRam adjustment: 70 mmRam area: 340 x 180 mmgreatest distance table - ram: 360 mmStrokes per minute: 110Table adjustment: 150 mmProjection: 230 mmTable surface: 600 x 460 mmDrop-through hole in the table: 220 x 130 mmWeight approx.: 2050 kgwith- Additional brake Ortlinghausen and UVV- Height-adjustable tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double-column eccentric press with decoiler, straightening system, feed unit, coil loading chair Controller : Siemens , MP 370 - OP7 Pressing force : 2500KN – 250t Stroke rate : 40 – 160 rpm Stroke adjustment : 40 – 200 mm Plunger adjustment : 150mm Tool installation height : 600mm – stroke in UT Table surface : 2500 x 1200 mm , ram 2500x1100mm Stand opening : 2600 between stands , Side: 900mm , Height: 800mm Tool changing device: 2 sliding and swinging support arms, hydraulic lifting strips Conveyor system: material width: 60- 600mm, material thickness: 0.7 – 5mm, Coil Loading Chair: ZBS-60/060, Lifting Height: 600mm, Load Capacity: 6000kg Decoiler: HE 6/600/Mot/Hyd, load capacity 6000kg, OD max: 2000, spreading range: 470-530 Straightening machine: R 50 / 600/ 9 , number of rollers: 9 pcs., rollers diameter 50mm, 2 feed sw. Dm 140mm Flow speed 225-40m/min ...

Eccentric press fabr. HELMERDING type PEP 12/15 BMasch. -No: 831184, year of construction 1988Technical specifications:Nominal force: 12 tMax. Ram stroke: 60 mmThroat: 160 mmTable surface area: 315 x 400 mmAdjustment of the ram: 40 mmMax. Strokes: 180 rpm.Ram area: 100 x 125 mmDrive power: 1.1 kWWith- 2 hand release- foot switch- separate control cabinet- Ortlinghaus additional brake and hydr. Multi-plate clutch- according to UVVused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hensel eccentric press - Height: 190 cm - Width: 70 cm - Depth: 90 cm - Weight: 1,100 kg - Table: 50 x 35 cm - 25 tons compressive force Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

I sell ECCENTRIC PRESS (PRESS) ILR ŽELEZNIK EP100 POWER: 100 tonnes

pressure: 63 tthroat: 235 mmstroke: 6 - 100 mmno. of strokes: 60 Hub/mindayligth: 270 mmdistance table - lower edge of ram: 370 mmram adjustment: 80 mmtable-size: 650 x 600 mmram head dimension: 180 x 230 mmwork height max.: 700 mmtable hole: 110 mmtotal power requirement: 4,0 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThis eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming.Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high performance Profi Press features a central m ...

Technical data: -Compressive force 100 t -Throat 320 mm -Wide stand below the Guide 400 mm -Table size approx. 850 x 610 mm -Discontinued diarrhea hole in the table 335 / 300 mm -thickness of the table clamping plate 90 mm -gr. Height approx. 300 mm -Plunger area 600 x 335 mm -Adjustable height of the RAM 80 mm -Stroke adjustment 10-130 mm -Emissions er hub in the RAM 32 mm -Speed continuous operation approx. 56 / min -Drive 400 V / 11 kW -Space requirement approx. B H 1900 x 2800 X 2200 mm -Weight approx. 9000 kg Starring:-UVV press backup controller PREVENTA -Hydr. + pneumatically actuated clutch -LUTEX auxiliary braking system -Central lubrication

Eccentric press Manufacturer KRS (Kurt Rompel Solingen) Type EPV50, YOC 66, Printing capacity 50 t, Plunger stroke 80 mm, Weight approx. 2.500kg UVV Test Book Machine fully operational

Eccentric press MABU type 12 TFprobably built in 1984Technical specifications:Pressing force: 12 tStroke adjustment: 6 - 60 mmTable size: 380 x 270 mmDiarrhea: 100 mmBear size: 120 x 100 mmInstallation height: 210 mmThroat: 145 mmDrive power: 1.1 kWExternal dimensions approx: 800 x 900 x 1750 mmWith- pneum. Friction clutch Control BA 1.1 for with / without movable protection Movable security not available!- height adjustable table- foot switch- stroke counterused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tech. Data Nominal press force 1000 kN at maximum stroke adjustment - commute 6.5 mm 1250 kN at maximum stroke adjustment - commute 3.5 mm Strokes with endurance 125/83/63 Hube/min Usable stroke rate 50 50 38 / min. Throat depth 320 mm, clamp 380 mm Stroke adjustment 10-120 mm, Stosselverstellung 80 mm Stosselflaeche 800 x 320 mm, recording journal 50 / 85 Tabletop table top hole, 900 x 630 mm 230 mm, Durchfalloch in the table 300 / 400 x 250 mm Drive - 7,5 / 5,5 kW Bulk 1350 x 2080 x 2780 mm, Btto 8900 kg

Fast press /Eccentric press #5282 Force 60 t Stroke : 38mm Strokes/min: 0-450 Overall size: 2650x1500x3200 mm Weight: 8 t

PRESS DESIGN  drive system: eccentric / crank   frame design: C-frame, single sided   number of suspensions: 1   opening in table: yes PRESS FORCES  total force (nominal): 40 toPRESS TABLE  table surface (left-right): 670 mm  table surface (front-back): 405 mmSLIDE  table surface (left-right): 315 mm  table surface (front-back): 155 mm  spigot hole diameter: 38 mm  stroke rate (max.): 140 /minSLIDE (MECHAN. PRESS)  stroke min.: 5 mm  stroke max.: 75 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 330 mm  throat (C-frame): 200 mmELECTRICAL SPECIFICATIONS  total power consumption: 4 kW  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 20 ...

Description: - ram stroke: 5 – 60 mm - rotations: 130/min - ram scope: 130/min - power requirement: 1,5 hp - pressure: 20000 kg - table dimensions: 470 x 370 mmweight approx.: 400 kg, dimensions (l x w x h) approx.: 800 x 600 x 1,700 mm

Eccentric press make MÜLLER type ExP 35Machine -No: 927171 built in 1971Technical specifications:Printing capacity: 35 tProjection: 220 mmRam strokes: 110 HpM.Adjustable ram: 53 mmAdjustable stroke: 1 - 70 mmTable surface area: 580 x 495 mmMotor power: 3.0 HPDimensions approx: 1100 x 1300 x 2000 mmWeight approx: 3500 kgWith- Protective screen- foot switch- height adjustable table- Protective screenused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Specifications: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable - Diarrhea hole in the table approx. 300 x 200 mm - maximum installation height approx. 360 mm - Stösselfläche approx. 340 x 160 mm - Cone hole in the plug 40 mm - Plug adjustability 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - 2 hand operation - Pneumatic connection 6 bar - Flywheel drive / speed infinitely adjustable - Rotary wedge coupling - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 4500 kg - mechanical clamp feed MABU type ZPL 11 with 3 roller straightener

Eccentric press make MÜLLER type ExP 60 SV/HKMachine -No: 6030790Technical specifications:Max. pressing force: 60 tProjection: 280 mmInstallation height: 360 mmTable surface: 750 x 560 mmDrop Hole: 300200mmTable adjustable: 160 mmRam area: 380 x 200 mmPlunger adjustability: 60 mmRam strokes per minute: 110Plunger adjustable: 10 - 90 mmMotor power: 4.0 kWWeight approx.: 3950 kgwith- Control SIEMENS Simatic OK 27- hydraulic clutch- adjustable table- Two-hand disengagement- straightening unit- Roller feed- Safety device according to UVVused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table eccentric press make MÜLLER type ExPT 12Machine -No: 0331188 built in 1988Technical specifications:Max. Punching capacity: 12 tProjection: 160 mmStrokes per minute: 120Slide adjustment: 40 mmAdjustable stroke: 8 - 80 mmTable size approx: 490 x 300 mmDrive power: 1.1 kWDimensions approx .: 2100 x 1200 x 1950 mmWeight approx: 2500 kgWith- pneumatic coupling- AMT material feed deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Inv. Num. : 6682 Type: PDE 100 RF-HK Producer: Müller Created: 2000 Parameters: Control system: SIEMENS SIMATIC Compressive force: 1000 kN Stroke length: 330 mm Maximum stroke rate per minute: 55 1/min Adjustment of the plunger: 100 mm Main engine power: 11 kW Machine weight: 7700 kg Equipment: Technical Documentation

PRESS DESIGN  drive system: eccentric / crank   frame design: C-frame, double sided PRESS FORCES  total force (nominal): 40 toPRESS TABLE  table surface (left-right): 650 mm  table surface (front-back): 480 mm  opening in bed (diameter): 200 mmSLIDE  slide force: 40 to  table surface (left-right): 460 mm  table surface (front-back): 300 mm  spigot hole diameter: 40 mm  stroke: 90 mm  stroke rate (max.): 130 /minSLIDE (MECHAN. PRESS)  slide adjustment: 56 mm  stroke adjustment: yes   stroke min.: 8 mm  stroke max.: 90 mm  variable speed: yes   stroke rate (min.): 40 /min  stroke rate (max.): 130 /minTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 295 mm  thr ...