Manufacturer:
(Category: 106)
: neu : ca. 6-8 Wochen ab Auftrag : Türkei : 8800 €: 169.84 €: 120 to: horizontal verschiebbar : 400 mm: 900 mm: 1200 mm: 5,8 mm/s: 9.5 mm/s: 1200 x 400 mm: 4 kW: 1900 mm: 1000 mm: 2450 mm: 1250 kgwith horizontally sliding cylindermotorhydraulic with additional hand pumpHeight adjustable tableOil Pressure manometerOPTIONS (PRICES ON REQUEST):Handwheel and fixingbolt for cylinderadjustment1 pair of V-blockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 400 tdistance between columns: 600 mmstroke: 600 mmtable-size: 3000 x 1500 mmtravel x / y: 2200 x 900 mmworking feed: 7 mm/sectank capacity: 66 lworking pressure: 30-250 bartotal power requirement: 18,5 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 3500 x 3500 x 3700 m2. STANDARD EQUIPMENTFRAME- Welded steel frame- Frame and plates are precision-milled using a CNC milling machine- Chrome-plated cylinder- Worktop with threaded holesHYDRAULICS- Bosch Rexroth hydraulic pump- Hydrapack or Badestons hydraulic directional control valve- Hydraulic block in accordance with EN standards- 1000-liter hydraulic oil tank- Pressure adjustment via pressure transmitter/regulatorELECTRICS- Control cabinet in accordance with EN standards- All cables are labeled and clearly arranged- All electrical components are from SiemensCONTROL PANEL- Stroke control in any position- X, Y, a ...
Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: Paul Müller, single-column eccentric press type ExP 45 -Pressure capacity: 45 tons -Clutch: Manual operation -Stroke: adjustable 4 - 80 mm -Table size: 465 x 690 mm -Table cutout: 220 x 175 mm -Protrusion: 230 mm -Punch hole: Ø 38 mm -Insertion height 300 mm -Dimensions: 1300/950/H2050 mm -Weight: 2220 kg
PRESS DESIGN drive system: hydraulic SLIDE total force (nominal): 40 to stroke: 45 mm stroke rate (max.): 110 /minTOOL DIMENSIONS lower table (left-right): 300 mm lower table (front-back): 280 mm shut height max.: 90 mmDIMENSIONS / WEIGHTS space requirements -left/right-: 1835 mm space requirements -front/back-: 1500 mm total height: 1800 mm total weight approx.: 2500 kg
SLIDE total force (nominal): 80 to stroke rate (max.): 120 /minV-RING stroke: 90 mmTOOL DIMENSIONS lower table (left-right): 420 mm lower table (front-back): 420 mm upper table (left-right): 420 mm upper table (front-back): 420 mmDIMENSIONS / WEIGHTS space requirements -left/right-: 2970 mm space requirements -front/back-: 1665 mm total height: 242 mm total weight approx.: 6000 kg
CONTROLS electronic controls SIEMENS S7 PRESS DESIGN drive system: servomechanic PRESS FORCES total force (nominal): 630 toPRESS TABLE table surface (left-right): 5450 mm table surface (front-back): 910 mmSLIDE table surface (left-right): 5500 mm table surface (front-back): 800 mmSLIDE (MECHAN. PRESS) stroke adjustment: yes stroke min.: 220 mm stroke max.: 350 mmTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 680 mmCOIL CHAIR coil weight max.: 8 toDECOILER sheet width max.: 410 mm coil weight max.: 8 to max. diameter of coil: 2000 mmTRANSFER SYSTEM number of tool stations: 20 distance between tools, stroke X fixed: 225 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 28000 mm space requirements -front/back-: 15000 mm total ...
Hydraulic press manufactured in 1995. This EXNER EX SBR 200 features a pressing force of 2000 kN and a drive power of 78 kW. With an oil capacity of 1400 liters and a weight of 52000 kg, this machine is designed for robust performance. If you are looking to get high-quality pressing capabilities, consider the EXNER EX SBR 200 hydraulic press we have for sale. Contact us for further details.
Assembly / press station with TOX power pack, feeding unit and sensorsPneumatic-hydraulic assembly or press station from an industrial plant, consisting of frame, press drive, feed and control/sensor components. Last use for semi-hollow rivets Ø 4.0 mm, length 5.0 mm (stainless steel 1.4016). Conversion to other rivet types/sizes depending on the tool set. Condition Used, from production dismantlingMechanically completeOptical with usual signsof use Untested, no function or process test carried outSale as shownScope of deliveryComplete pressing/assembly stationTOX powerhouseFeeding unit incl. funnel and valvesSensors, pneumatics, electrical components Technical data:Main components Machine frame / systemManufacturer: VTS – Connection Technical ServiceType: 300-4/180.6Serial No.: 300.329.00Year of construction: 2000Stable steel frame, floor-standing, ready for assemblyPress driveManufa ...
pressure: 80.0 tstroke: 250 mmtable surface area: 1040 x 260 mmcolumn travel between the guideways: 1040 mmajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 5.5 kWweight of the machine ca.: 835 kg.dimensions of the machine ca.: 1810 x 700 x 2100 mmEquipment:- robust electro-hydraulic workshop press, with fixed cylinder- Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc.- Robust welded steel construction for heavy-duty use- Table height adjustment via piston rod Including round steel chain and 2x locking bolts Piston rod with metric mount- 1x set of V-block prism support- Pressure gauge for pressure display- Simple manual operation with : 1x feed speed 1x working speed 1x retraction speed- piston can be stopped in any position- Hydraulic tank permanently mounted on the side- operating inst ...
Max. pressing force: 150t, bending length: 4050mm, backgauge: 750mm, control: Cybelec CNC 7200 P, weight: approx. 15t. Equipped with hydraulic tool clamping, crowning system, height-programmable backgauge, two control panels and two pneumatic bending aids. Including stand with various upper tools and dies as well as various special accessories manufactured in-house. Documentation available. An on-site inspection is possible.
Key data: 100 t
Qty. 1 Second-hand dross press machine – already dismantled and in storage Mfc.: Altek Model 100 with 10 x 181S Pan Sets Built: 2021 Dismantled: 2024 Cycle time for pressing: 6 – 8 min./ pan Capacity: 95 metric tonnes of dross/month 21 days/month = 4.523 mt/day 32 skims/day = 141 kg/skim The pan set dimensions are as follows PANSET MODEL Width Depth Stack-up height Stack-up weight Pan Capacity [MM] [MM] [MM] (kgs) m^3) (kgs) 181S 1016 813 543 1032 0.12 181
CONTROLS PLC LAUER SLIDE total force (nominal): 320 to stroke: 200 mmSLIDE (HYDR. PRESS) approximation velocity max.: 200 mm/s working velocity min.: 10 mm/s working velocity max.: 44 mm/sCOUNTER RAM nominal force: 63 to stroke: 30 mmV-RING nominal force: 100 to stroke: 30 mmTOOL DIMENSIONS lower table (left-right): 500 mm lower table (front-back): 500 mm upper table (left-right): 695 mm upper table (front-back): 730 mm shut height max.: 650 mmDECOILER sheet width max.: 250 mm sheet width (min): 40 mm coil weight max.: 1250 to max. diameter of coil: 1300 mmLEVELLER UNIT sheet width max.: 250 mm sheet thickness max.: 5 mm sheet thickness min.: 0.8 mm number of leveller rolls: 11 feed velocity min.: 4 m/min feed velocity max.: 12 m/minSTRIP-FEEDER feeder type: grip feeder sheet width max.: 250 mm sheet th ...
Hydraulic press manufactured in 2014. This WIS ATEVI Druckgeber ATeVi Heidel features a ram stroke of 800 mm and a closing force of 500 kN. It has a machine weight of 19,500 kg and includes a Siemens S7 control system. If you are looking to get high-quality hydraulic pressing capabilities, consider the WIS ATEVI Druckgeber ATeVi Heidel machine we have for sale. Contact us for further details.
Power (ton) 60 Table dimensions ( x-y/mm) 890 x 458 Slide Dimensions X-Y (mm) 890 x 458 Stroke (mm) 20 - 76 Slide Adjustment (mm) 80 Strokes type adjustable Stroke per minute 70 - 750 Overhauled in 2021
Key data: 1 t
Hydraulic Fine Press, MATRA, , up to 1000kg, Table: 260x200mm, Radius 110, Foot or manual release, fine adjustment without UVV, pressure and stroke! Fully functional, can be visited under power
Press force: 16,000 kNMax. ram stroke: 1,700 mmMax. opening between table and ram: approx. 2,450 mmMin. opening: 770 mmRam plate: 4,500 × 2,500 mmTable size: 4,500 × 2,500 mmRapid traverse: 350 mm/sWorking speed at 66% press force: 23 mm/sWorking speed at 100% press force: 13 mm/sMax. return speed: 220 mm/sMax. retraction force: 1,600 kNRam cushion:Force: 2,000 kNStroke: 150 mmPressure plate: 3,650 × 1,580 mmTable cushion:Force: 2 × 1,000 kN or 3 × 500 kNStroke: 300 mmPressure plate: 1,550 × 700 mmDrive:Main motors: 2 × 132 kWMotor filter unit: 4 kWMotor speed: 1,500 rpmSuitable for demanding forming, deep drawing, and pressing operations with large tools and high press forces.
Press force: 16,000 kNMax. ram stroke: 1,700 mmMax. opening between table and ram: approx. 2,450 mmMin. opening: 770 mmRam plate: 4,500 × 2,500 mmTable size: 4,500 × 2,500 mmRapid traverse: 350 mm/sWorking speed at 66% press force: 23 mm/sWorking speed at 100% press force: 13 mm/sMax. return speed: 220 mm/sMax. retraction force: 1,600 kNRam cushion:Force: 2,000 kNStroke: 150 mmPressure plate: 3,650 × 1,580 mmTable cushion:Force: 2 × 1,000 kN or 3 × 500 kNStroke: 300 mmPressure plate: 1,550 × 700 mmDrive:Main motors: 2 × 132 kWMotor filter unit: 4 kWMotor speed: 1,500 rpmSuitable for demanding forming, deep drawing, and pressing operations with large tools and high press forces.
Hydraulic press with a pressing force of 5,000 kN or 500 t.Manufacturer: Maschinenfabrik EXNER GmbH & Co. KGType: EXSBRD 500ETMachine No.: 10461Year of manufacture: 2001Max. stroke length: 1,300 mmMax. opening: 1,800 mmMin. opening: 500 mmTable size: 2,550 × 2,000 mmFrame passage: 2,570 mmTool dimensions: 2,200 × 1,800 mmMax. tool weight: 25,000 kgWorking speed: 26 / 50 mm/sRapid traverse speed: 400 mm/sOverrun distance: 97 mmOverrun time: 158 msSafety distance: 252 mmDrive power: 159 kWOil capacity: approx. 2,800 liters
General Description Mechanical stamping press manufactured by ILR, designed for heavy-duty metal forming and stamping operations. The machine has been fully modernized with a PLC control system and is suitable for manual or automatic operation with a sheet feeder. Technical Details Manufacturer: ILR Machine type: Mechanical press Year of manufacture: 1972 Year of refurbishment: 2024 Press force: 250 t Stroke rate (manual): 45 strokes/min Stroke rate (automatic): 20 strokes/min Table size: 1,120 × 740 mm Stroke: 400 mm PLC-controlled digital operating system Operating modes: • Automatic with sheet feeder support • Foot pedal control • Two-hand control Safety light curtains installed Condition Used industrial condition. The machine was refurbished in 2024 and upgraded with a modern PLC control system. Equipped with safety light curtains and multiple operating modes. Operational st ...
pressure: tdistance between columns: mmstroke: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Jessinegg + Urban, Stroke 300, Lift: 300, table 450x370, 1300kg
Key data: 25 t
Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg
Key data: 170 t
Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,
SPIERTZ F2E32-22 320T mechanical press was built in 1982 in Germany. The machine is designed for series and mass production of parts used in the automotive and machinery industries. It enables the cold forming of metals, such as blanking, stamping, and forming of large-sized parts. All these operations are performed with a press force of 320 tons. The drive system of the SPIERTZ F2E32-22 press is based on a flywheel and an eccentric gear that converts the rotational motion of the shaft into the reciprocating motion of the slider. This solution ensures smooth machine operation and high machining repeatability. Tools are positioned on the work table with centring pins and then fixed to the table and the slider with bolts. The SPIERTZ F2E32 320T press also stands out for its rigid design, which ensures reliable operation in demanding production conditions. Technical Specifications of the ...
Schaal SEP 80 SZV 302 Automatic Punching Press Machine • 2001 • ID: 34126 Frame and guidance on this unit are built for repeatability: a rigid double-column O-frame in vibration-damping cast iron, with the ram carried in 6-point play-free roller guides. Power is transmitted by a flywheel drive with pneumatic clutch/brake combination. Year of manufacture is 2001. Control and protection - Unidor electronic control system giving repeatable stroke accuracy and fast setup; integrated tool safety device protecting dies from damage caused by misfeeds or incorrect part positioning, which reduces downtime and tooling costs. Key data - pressing force 800 kN (80 tons); 60 – 320 min⁻¹; ram stroke adjustable 8 – 80 mm; ram adjustment 80 mm; ram surface 700 × 500 mm; clamping plate 830 × 700 mm at 80 mm thickness; table opening 500 × 200 mm; strip feed clearance 120 ± 40 mm; drive po ...
Configuration 2 x BRUDERER BBV 202/120 DOUBLE strip feeder KOHLER leveling machine 100.180/2.500.2M, year of construction 1992 Unwinding reel / coil reel Soundproof cabin Conveyor belt for part removal Lifting and sorting device for containers Roller conveyors and stacking racks Technical documentation available Complete BRUDERER high-performance punching line consisting of a precision punching machine BSTA 50 EL, BRUDERER strip feeder BBV 202/120, KOHLER leveling machine, unwinding reel, soundproof cabin, and discharge and conveying equipment. The system is designed for the efficient processing of strip material in high-speed punching operations. Extensive technical documentation is available. Technical Specifications Stroke Power 500 kN (50T) Table area: 940 x 580 mm Tool length max. 950 mm Operating hours 49637 Strip width: Max. 202 mm Machine dimensions: 3100 x 2700 x 1800 m ...
pressure: 160 tthroat: 340 mmstroke: 20-120 mmno. of strokes: max. 45 Hub/mintable plate: 1000 x 720 mmram surface: 750 x 380 mmdaylight: 330 mmweight of the machine ca.: 8,7 tdimensions of the machine ca.: 1270x2310x2595 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 500 t
Manufacturer: BUCHER-GUYER Model: AEBI 500 Year: 1969 Condition: Used Stock number: 9455 Control system: SIMATIC S 5 (CPUS 115) Compressive force: 500 t Piston diameter: 525 mm Piston rod diameter: 498 mm Stroke length: 412 mm Machine weight: 18000 kg The press underwent a complete overhaul in 1992 (hydraulics and control system). Equipment: Technical documentation Hydraulic power unit Switchgear
BLM PK 12T DIG Hydraulic Tube / Profile Bending Machine (Made in Italy) Description: For sale is a professional, hydraulic bending machine / vertical press from the renowned Italian manufacturer BLM Group. The machine is in a fully functional condition and is equipped with a digital PLC control system including a touchscreen control panel. Ideally suited for the precise bending, forming and processing of tubes, profiles and solid materials in locksmiths, metal construction or industrial companies. Technical data: Manufacturer: BLM Cantù (Italy) Model / Type: PK 12T DIG Serial number / matriculation: 213702008 Main drive (engine MEZ Frenštát): Power: 18.5 kW (25 HP) Voltage: 380 V (three-phase current, 50 Hz) Speed: 1460 rpm Current: 36 A Degree of protection: IP54 Hydraulic cooling (oil cooler EmmeGi): Type: 2040KBV 230-400V Max. oil working ...
500 € 
