Manufacturer:
(Category: 106)
USED OBEDINENT ECCENTRIC PRESS DESCRIPTION: The frame and slide are constructed of cast steel, with dovetail guides, with a base intended for oil recovery and equipped with mechanical extractor. For the protection of the press and dies. It has two compensating cylinders, pneumatically driven, for balancing the slide and dies. The connecting rod is built in alloy steel and long dimensioned. The clutch-brake is electro-pneumatic actuated, equipped with a double-body safety solenoid valve with cross-flows. Lubrication is carried out by means of a centralised manual pump and the pneumatic installation is equipped with a compensation tank, filter-regulator-lubricator unit with a control pressure switch and safety valve. On the front of the press is the two-handed shot, with an emergency stop button and a stop button in upper neutral. OB-100 TECHNICAL SPECIFICAT ...
USED GAMEI FRICTION PRESS Rated capacity kn/tn 300tn Pitch between uprights 700 mm Lower table 550 x 610 mm Top table 475 x 410 mm Vertical light between tables 670 mm Working height 640 mm Main motor 22 kW
ROVETTA FO-200 ECCENTRIC PRESS FEATURES: FO-200 MODEL Nominal capacity kn/tn 200Tn Fixed stroke 200 mm Tables 730 x 810 mm Span between uprights 760 mm Hits minute 65 Vertical span between tables 450 mm Working height 800 mm Sliding "Spindle" regulation 100 mm Main motor 11 kW Stroke pneumatic cushion 100 mm Pneumatic cushion force 25tn WE ALSO HAVE THE FO-300, PLEASE SEE.
Key data: 1250 t
Manufacturer: Dieffenbacher Model: PO-F 1250 A Year: 1979 Condition: Used Stock number: 9543 Control system: Siemens Simatic HMI Compressive force: 1250 t Table length: 1250 mm Table width: 1250 mm Stroke: 630 mm The general overhaul was carried out in 2015.
USED GAMEI OBR-140 ECCENTRIC PRESS FEATURES: MODEL OBR-140 Nominal capacity 140tn Strokes per minute 90 approx. Adjustable stroke 17-142 mm Lower table 1,140 x 770 mm Top table 480 x 800 mm Vertical span between tables 650 mm Working height 945 mm Sliding spindle regulation 140 mm Main motor 11 kW It can be supplied with or without CE adaptation.
TJF-GARNET SPECIAL HYDRAULIC PRESS: Hydraulic press with double upright equipped with two side cylinders joined by a plate for the pre-pressing and pressing of rotors and stators, and a central cylinder for the extraction of the mandrel and stalling of the rotor shaft, as well as the extraction of shafts in case of repair. It has a removable table for the stacking and handling of rotors and stators. MAIN CYLINDERS 150 TN. 2 hydraulic cylinders of 75 Tn. of power each, with a stroke of 1200 mm joined by a grooved plate, with a central bore of 250 mm in diameter. Maximum useful height cylinder plate of 1550 mm. Minimum useful height cylinder plate of 350 mm. ABSTRACTION CYLINDER 1 central cylinder of 80 Tn of power with 1200 mm stroke. Prepared to adapt abstraction clamp, end of threaded stem to M 35,150 x 40 in length. Maximum useful height ...
Manufacturer: ERFURT Model: PKnT 160 Year: 1978 Condition: Used Stock number: 9542 Compressive force: 160 t Maximum stroke rate upper table: 15 1/min Ram stroke: 200 mm Adjusting the ram: 130 mm
STANDARD FEATURES: Power 50 t Motor power 1.5 kw Working speed 2.25 mm/s Return speed 4.50 mm/s Maximum pressure 500 bar Piston stroke 150 mm Spindle stroke 120 mm Front light 800 mm Side light 160 mm Max. vertical span 1,020 mm Bed light 205 mm Total front 1,090mm Total side 900 mm Total height 2,000 mm Weight 295 Kg. Specially designed for extraction, bushing, straightening, etc. The hydraulic presses of the S series consist of a four-pillar electro-welded structure with open sides. They have a movable base that allows it to be positioned at different heights. The fixing is by means of two pins located at the bottom of the bed. The raising and lowering system is by means of chains driven by the cylinder of the press. SD Models: are fixed head. Double-acting cylinder with chrome-plated plunger and anti-wear guides. It is equipped with a remov ...
The machine is in good technical condition; it can be tested by prior arrangement.
The machine is in good technical condition; it can be tested by prior arrangement.
Key data: 80 , 1050 , 450
MODEL ST-80 Power t 80 Motor power kw 3 Working speed mm/s 3.8 Approach speed mm/s -- Return speed mm/s 4.7 Maximum pressure bar 315 Piston stroke – J mm 450 Lower table mm 1,000 x 1,750 Head Displacement – C mm 730 Bridge Displacement – D mm 1,100 Front light – A mm 1.050 Vertical light – B mm 500 Working height – E mm 800 Total front – G mm 2,000 Total side – H mm 1,750 Overall height – I mm 2,250 Weight kg 1,700 STANDARD DESCRIPTION: We have designed ST series motorized hydraulic presses, with movable gantry and adjustable head, available in three powers from 80 to 150 tons. They are specifically designed for the straightening of welded structures and plates cut by oxy-fuel or laser. Its design facilitates the loading and unloading of large parts, plates or structures, optimising working times. Thanks to the lateral displac ...
MODEL SL-150 Power t 150 Motor power kw 4 Piston stroke mm 250 Working speed mm/s 3.1 Return speed mm/s 4 Head displacement mm 1,000 Front light mm 1,500 Side light mm 340 Max. vertical span mm 955 Bed light mm 405 Total front mm 2,150 Total side mm 1.180 Total height mm 2.805 Weight kg 2.350 STANDARD DESCRIPTION: The S-series hydraulic presses are specially designed for extraction, casing and straightening work. They work with a hydraulic pressure of less than 320 bar, which guarantees greater durability of the entire hydraulic system. STRUCTURE: They consist of an electro-welded structure with four uprights with open sides. They are equipped with a movable bed that allows it to be positioned at different heights. The fixing is done by means of two pins located at the bottom of the bed. The raising and lowering system is carried out by means of cha ...
pressure: - tdistance between columns: - mmstroke: - mmtotal power requirement: - kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: KAISER Model: V200 WR Year: 1983 Condition: Used Stock Number: 9535 Compressive force: 200 t Table length: 1450 mm Table width: 900 mm Maximum stroke rate upper table: 150 1/min Adjustment of the ram: 100 mm Ram stroke: 20-120 mm Equipment: Sheet metal straightening roller Unwinder Workpiece feeding
There are three May MKN1-100/6 toggle-type presses available, ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible.
pressure: 4000 tstroke: 380 mmdayligth: 1050 mmdistance between columns: 1580 mmtable-size: 1520 x 1600 mmdimension of ram: 1470 x 1500 mmram adjustment: 15 mmstrokes of ram per min.: 50 ejector path: 31 / 70 mmmain drive: 200 kWheight over floor: 7520 mmtotal power requirement: ca. 250 kWweight of the machine ca.: 245 tdimensions of the machine ca.: 4,4 x 4,6 x 7,5 mcomplete forging line includes an - Smeral Hot Forging Press- induction heater- Manyo 460-millimeter forging roll- manipulator with forging roll link- SMERAL 500-ton trimming pressThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Eccentric press with installed tool for 82mm twist off jar caps. Automatic feeder
TECHNICAL CHARACTERISTICS: MODEL SH-250 Power tn 250 Motor power kw 5.5 Piston stroke mm 450 Maximum pressure bar 350 Neckline mm 375 Working speed mm/s 2.2 Approach speed mm/s 9.8 Return speed mm/s 17.5 Guide diameter mm 40 Support table mm 2.200 x 600 Table spacing mm 900 Support blocks mm 120 x 120 x 600 Working height mm 850 Total length mm 2.820 Total width mm 2,000 Total height mm 1.615 Weight kg 8,500 STANDARD DESCRIPTION: Our SH Series Horizontal Ram Hydraulic Press is designed with a range of three different powers ranging from 100 to 250 tons. Horizontal hydraulic presses are specially designed for straightening and bending profiles, bars and beams. The horizontal design of the machine allows us to easily handle large beams and profiles. The horizontal hydraulic press of the latest generation HS series has evolved into a versatility of use ...
TECHNICAL CHARACTERISTICS: MODEL CF-100/VR Power t 100 Engine power kw 9 Neckline mm 375 Working speed mm/s 5 - 9 Approach speed mm/s 162 Return speed mm/s 230 Maximum pressure bar 290 Piston stroke mm 450 4 Lower table mm 850 × 600 Top table mm 700 × 450 Maximum vertical span mm 650 Working height mm 900 Total front mm 1,240 Total side mm 1,950 Total height mm 2,790 Weight kg 3.820 STANDARD DESCRIPTION: The CF/VR series motorized gooseneck hydraulic press models are available in three different power outputs, from 80 to 150 tons. Specially designed to carry out medium and high production work in stamping, die-cutting and drawing. These state-of-the-art presses stand out for their high versatility, allowing them to be integrated into automatic production lines. They work with a hydraulic pressure of less than 320 bar, which guarantees g ...
MODEL ST-150 Power t 150 Motor power kw 4 Working speed mm/s 2.3 Approach speed mm/s 7.4 Return speed mm/s 10 Maximum pressure bar 305 Piston stroke – J mm 450 Lower table mm 1,500 x 3,000 Head Displacement – C mm 1,000 Bridge Displacement – D mm 2,500 Front light – A mm 1,550 Vertical light – B mm 700 Working height – E mm 750 Total front – G mm 3,000 Total side – H mm 3,000 Overall height – I mm 2,750 Weight kg 5,000 STANDARD DESCRIPTION: We have designed ST series motorized hydraulic presses, with movable gantry and adjustable head, available in three powers from 80 to 150 tons. They are specifically designed for the straightening of welded structures and plates cut by oxy-fuel or laser. Its design facilitates the loading and unloading of large parts, plates or structures, optimising working times. Thanks to the lateral displac ...
GUILLEM ECCENTRIC PRESS mod. 3RPE 125 USED REN DESCRIPTION Highly robust NECK eccentric press with pneumatic clutch and cushion. Includes acrylic front safety doors with magnetic sensor to ensure safety in use. FEATURES Maximum force (pressing): 125 Ton. Maximum number of strokes per variable minute: 47 g/min Stroke variation: 16 / 190 mm Crank adjustment: 80 mm Pitch between uprights: 450 mm Vertical span: 510 mm Pneumatic cushion: 12 tn Cushion stroke: 45 mm Central drill lower table: 275 mm Sliding drill diameter: 60 mm Sliding top table: 370 x 600 mm Bottom table: 760 x 1000 mm Main motor power: 7.3 kw Dimensions: L 1800 W 2000 H 3100 MM Machine weight approx.: 8000 kg Year of manufacture: 1995
Specially designed for stamping, die cutting, and forming work. Model CM-50NC Power 50 TN Motor power 5.5 KW Throat depth 265 mm Working speed 9.9 mm/s Approach speed 50 mm/s Return speed 66 mm/s Maximum pressure 320 bar Piston stroke 250 mm Lower table 700 x 450 mm Upper table 550 x 300 mm Maximum vertical light 400 mm Working height 850 mm Total front 1.160 mm Total lateral 1.290 mm Total height 2.085 mm Weight 1.750 kg STRUCTURE AND TABLES The CM/NC series hydraulic presses consist of an electro-welded structure made exclusively of S355JR steel. It is stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. Calculated and designed with finite element software. With all this, we always guarantee our high standards of precision and quality. They are equipped with an upper table and a lower table made of C45E ste ...
CONTROLS PLC SIEMENS S7 SLIDE total force (nominal): 630 toTOOL DIMENSIONS lower table (left-right): 900 mm lower table (front-back): 900 mm shut height max.: 900 mm
pressure: 93 ( 100 ) tstroke: 165 mmtable surface area: 990 x 400 mmtotal power requirement: 1 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 2 x 1 x 2,2 / 2,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2025 : 070145 : prompt, Zwischenverkauf v : Türkei : 44500 €: 849.95 €: 1 : 40 to: 4 mm: 630 mm: 450 mm: 160 mm: 3 - 75 mm: 154 1/min: 420 x 275 mm: 8 : 75 mm: 40 mm: 230 mm: 293 mm: 4 kW: 1174 mm: 1540 mm: 2200 mm: 2850 kg8-fold ram guide2-hand control panel and foot pedalAutomatic central lubricationFront light guardVibration padsUser Manual in German with CE Declaration of ConformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: Cybelec DNC 600S. Inspection by appointment possible.
pressure: 135 tchamfer lenght: 3600 mmdistance between columns: 3150 mmstroke of upper beam: 200 mmajustment speed: 70.0 mm/secworking feed: 10.0 mm/secreturn speed: 80.0 mm/sec: 315 bardayligth: 400 mmtable height: 915 mmcolumn arm: 250 mmengine output: 15.0 kWweight: 8800 kgrange L-W-H: 4200 x 1700 x 2600 mmEquipment:- Electro-hydraulic press brake with torsion bar- HACO NC control (Model ATL 550) for X and Y axes Computer-controlled multi-axis NC press Backgauge position pre-selection (electric backgauge) Backgauge retraction for Z-bends Bending depth pre-selection Electric depth adjustment Memory for 200 programs- Swiveling control panel (front left)- NC motorized backgauge (X-axis) with 2 manually adjustable stop fingers- NC motorized depth adjustment (Y-axis)- 1x set of sectionalized gooseneck (swan-neck) upper tools- 1x rotatable MULTI-V die block- Rear safety guard (sliding door) ...
pressure: 60 tthroat: 280 mmstroke: 10-90 mmno. of strokes: 110 Hub/minram - range of adjustment: 60 mmtable surface area: 750x540 mmram surface: 600x200 mmhole in the table: 300x200 mmtable height: 780 mmtool hole in ram: Ø35 mmweight of the machine ca.: 3,7 tdimensions of the machine ca.: 1800x1800x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 tstroke: 380 mmtable-size: 800 x 700 mmworking speed:: mm/ sec.return speed: mm/secwork height max.: mmtotal power requirement: 4,0 kW: 90 mmweight: 2,5 tdimensions: 2,2 x 1,4 x 1,6 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: hydraulic quick die change system: yes feedstock transport direction: right to left SLIDE total force (nominal): 400 to stroke: 200 mmCOUNTER RAM nominal force: 100 to stroke: 30 mmV-RING nominal force: 200 to stroke: 30 mmTOOL DIMENSIONS lower table (left-right): 650 mm lower table (front-back): 650 mm shut height max.: 420 mm passline opening (free passage in side columns): 420 mmOVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 500 mm sheet thickness max.: 12 mm feed velocity max.: 30 m/min feedstock transport direction: right to left LEVELLER UNIT sheet width max.: 500 mm sheet width (min): 60 mm sheet thickness max.: 12 mm sheet thickness min.: 1 mm integrated feed function: yes STRIP-FEEDER sheet width max.: 400 mm sheet thickness max.: 30 mmCROP SHEAR ...
