Manufacturer:
(Category: 106)
Hydraulic press, oil hydraulic press, shear press -Manufacturer: Santenberg, hydraulic shear press -Hydraulic unit: HyPneu 0.75 kW / 100 bar -Individual components: see photos -Dimensions: 1190/910/H1670 mm -Weight: 262 kg
Profile bending machine, bending machine, flat bar bender, horizontal bending/straightening press -Flat bar bender: hydraulic profile bending machine -Base: on casters, table folds on both sides -Operating mode: Manual and automatic operation -Accessories: see photos -Overall dimensions: 2155/1320/H1070 mm -Transport dimensions: 1320/840/H1245 mm -Weight: 404 kg
T-slot plate, clamping plate with holes, plate field, welding table, welding table-Dimensions: 3012/2010/H710 mm-Panel thickness: 82 mm-Plate: with supporting ribs-Weight: 3370 kg
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool -Die tool: Forming tool / Press tool -Length: 600 mm -Dimensions: see photos -Overall dimensions: 600/85/H115 mm -Weight: 40.6 kg
Pressing tool, sheet metal former, forming tool, bending tool, folding tool, bending tool, die, die-casting tool -Bending tool: Pressing tool for press brake / press, 5 pieces -Length: 2x 300 mm / 1x 275/200/175 mm each -Groove width: 58/52 mm -Angle: 90° Dimensions: see photos / technical drawing -Price/Fee: complete -Transport dimensions: 450/300/H115 mm -Weight: 48.3 kg
: neu : ca. 4 Monate ab Auftragse : Italien : 70000 €: 1323 €: 300 to: fix : 500 mm: 1500 mm: 20 mm/s: 2 mm/s: 2800 mm: 1500 mm: 3200 mm: 6000 kgtable with integrated cylinder to lift the workpiececontrol by levers as well as control panel (2- hand)regulable maximum pressureManometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 160000 €: 3024 €: 300 to: 500 mm: 4.000 x 2.550 mm: 700 mm: 20 mm/s: 2 mm/s: 3550 mm: 4000 mm: 2600 mm: 15000 kg: horizontal verschiebbar : 2550 mm: 1.800 mm: 2.800 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: Forming tool / Press tool -Profile: Ø 45 mm -Dimensions: 535/195/H140 mm -Weight: 35 kg
T-slot plate, clamping plate with dovetail slots, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press -Opening: 150 x 100 mm -Groove width: 18 mm -Hole spacing: 200 x 250 mm, Ø 14 mm -Dimensions: 480/350/H60 mm -Weight: 66 kg
T-slot plate, clamping plate with T-slots, plate field, welding table, welding table-Dimensions: 1500/3510/H950 mm-Plate thickness: 20 mm-Plate is: with supporting ribs-1x T slot: 18 mm-with: detachable stop-Weight: 2600 kg
T-slot plate, measuring plate, measuring table, clamping plate with T slots, plate field, welding table, welding table -Dimensions: 620/1560/H260 mm -Plate thickness: 20 mm -Plate is: with supporting ribs -1x T-slot: 15 mm -Weight: 360 kg
Hydraulic press, oil hydraulic press, pressing machine, pressing tool, pressing pliers -Hydraulic press: Hydraulic unit novopress type WK 9483 -Pressure: max. 150 bar / 0.45 l/min -with punch set: 1x Ø 18mm, 2x Ø 14mm, 1x Ø11 mm, 1x Ø 9mm -Operation: foot pedal -Connection hoses: for pressing tongs or similar -Dimensions: 850/550/H1250mm -Weight: 158 kg
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool -Die tool: Forming tool / Press tool -Length: 300 mm -Dimensions: see photos -Overall dimensions: 300/80/H110 mm -Weight: 17.9 kg
T-slot plate, measuring plate, measuring table, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 250/1450/H170 mm -Sheet thickness: 28 mm -Plate is: with supporting ribs -1x T-slot: 12 mm -1x: Longitudinal groove -Weight: 156 kg
pressing tool, sheet metal former, forming tool, ball forming tool-Pressing tool: ball forming tool-Radius: 50.11 mm-Hole: Ø 40 mm-Dimensions: Ø 165 x 270 mm-Weight: 18.4 kg
PRESS FORCES total force (nominal): 100 toPRESS TABLE table surface (left-right): 950 mm table surface (front-back): 660 mm thickness of bolster plate: 68 mmSLIDE table surface (left-right): 540 mm table surface (front-back): 450 mm spigot hole diameter: 60 mm stroke: 130 mm stroke rate (max.): 65 /minSLIDE (MECHAN. PRESS) slide adjustment: 100 mmTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 370 mmDIMENSIONS / WEIGHTS total weight approx.: 7000 kgLocated in Barcelona - Spain2 identical units available
: neu : 2024 : 7308 : prompt, Zwischenverkauf v : Italien : 2400 €: 1 : 10 to: fix : 150 mm: 850 mm: 520 mm: 170 kgWith handpump with 2 speedsAccording to CE regulationsUser manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate comes from: a Hüller Hille milling machine type nb-h 70 -Width: 475 mm -Length: 500 mm -Height: 68 mm -Plate: is solid -Groove width: 12 mm -Dimensions: 500/475/H68 mm -Weight: 90 kg
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: Forming tool / Press tool, 2-piece -Profile: Angle 90° -Hole: Ø 40 mm -Dimensions: 160/140/H345 mm -Weight: 40.1 kg
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool-Die tool: molding tool/press tool-Profile: Ø 98 mm-Receptacle: Ø 40 mm-Dimensions: Ø 98 x 185 mm-Weight: 7.4 kg
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool-Die tool: forming tool / press tool adapter MST Ø 85-Receptacle: Ø 40 mm-Receiving thread: M34-Dimensions: Ø 85 x 160 mm-Weight: 4.5 kg
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, adapter-Die tool: forming tool/press tool adapter-Receptacle: Ø 40 mm-Receiving thread: M33-Quantity: 2x adapters available-Price: per piece.-Dimensions: Ø 40 x 100 mm-Weight: 0.8 kg/pc.
Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Safety cage fully enclosed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Protrusion: 190 mm -Stroke rate: 105 strokes/min -Adjustable plunger: 50 mm -Pulley surface 250 x 200 mm -Adjustable stroke: 15-70 mm -Table size: 540 x 310 mm -Protrusion: 180 mm
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool-Die tool: forming tool/press tool adapter-Receptacle: Ø 40 mm-Bore: Ø 20 mm-Dimensions: Ø 70 x 135 mm-Weight: 2.6 kg
Profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press-Bending/straightening press: hydraulic profile bending machine-Base: solid construction, mobile-Hydraulic unit: unfortunately without type designation-Piston rod: Ø 55 mm / stroke: 200 mm-Individual components: see photos-Total dimensions: 1180/1060/H1000 mm-Weight: 445 kg
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool-Die tool: molding tool/press tool-Profile: Ø 76 mm-Receptacle: Ø 40 mm-Dimensions: Ø 76 x 130 mm-Weight: 2.8 kg
Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Manufacturer: NEHER, manual spindle press type SPPG-40/100 -Pressure: max. 40,000 kg -Stroke: 600 mm -Intermediate dimension: 715 mm -Spindle mount: Ø 40 mm -Table size: 1100 x 600 mm, groove width mm -Table bore: Ø 120 mm -Dimensions: 1800/1800/H2400 mm -Weight: 1940 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring mill, T-slot plate -T-slot plate: for milling machines -Width: 500 mm -Length: 500 mm -Height: 87 mm -Plate: is solid -Groove width: 12 mm -Dimensions: see photo technical drawing -Quantity: 21x mounting plates available Price: per piece -Dimensions: 500/500/H87 mm -Weight: 91 kg/piece
Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool-Die tool: forming tool / press tool clamp press tool-Receptacle: Ø 40 mm-Profile: Radius 20 mm-Dimensions: 140/46/H120 mm-Weight: 2.2 kg
