subcategories
(3rd category level)
Manufacturer:
(Category: 103)
This 3-axis MIKRON VCP 800 was manufactured in 2003. It features an X-axis travel of 800 mm, Y-axis travel of 450 mm, and Z-axis travel of 450 mm. The machine is equipped with a Heidenhain iTNC 530 control and a high-speed spindle capable of reaching up to 20,000 rpm. If you are looking to get high-quality machining capabilities, consider the MIKRON VCP 800 vertical machining centre we have for sale. Contact us for further details.
Rated current: 7.6A, frequency: 50Hz, control voltage: 110V, machine lamp: 24V, degree of protection: IP54, connected load: 5kVA, weight: 1.65t, with CE marking, an on-site inspection is possible.
This 4-axis HITACHI SEIKI HS630 was manufactured in 2001. It features a travel of 850 mm on the X-axis, 800 mm on the Y-axis, and 850 mm on the Z-axis. The machine has a table work area of 630 x 630 mm and a maximum pallet load capacity of 1200 kg. If you are looking to get high-quality machining capabilities, consider the HITACHI SEIKI HS630 horizontal machining centre we have for sale. Contact us for further details.
This 3-axis Matsuura H.Plus 405 was manufactured in 2005. It features a pallet working surface of 500 x 500 mm and a maximum load capacity of 400 kg. The machine offers an impressive X, Y, and Z-axis travel of 600 mm each, along with a spindle speed range of 40 - 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Matsuura H.Plus 405 horizontal machining centre we have for sale. Contact us for further details.
This 5-axis DMG MORI DMU 50 3rd gen was manufactured in 2017. It features impressive axis travels of 650 x 520 x 475 mm and a maximum spindle speed of 15,000 rpm. The machine includes a tool magazine capacity of 60 positions and a robust table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 50 3rd gen vertical machining centre we have for sale. Contact us for further details.
x-travel: 1250 mmy-travel: 500 mmz-travel: 500 mmControl: Heidenhain tnc 124 serial number: 5277 table size: 1800 - 360 mm taper ISO: 50 weight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3500 mmy-travel: 2500 mmz-travel: 1000 mmControl: HEIDENHAIN iTNC-530 table-size: 4.500 x 1.500 mmdistance between columns: 2300 mmrapid travel x/y/z: 15/12.000 mm/minfeeds: 5.000 mm/mintool taper: ISO 50 number of spindle speeds: 5000 U/min/rpmSpindle power: 30 kWtable weight: 10 thandwheel: HR- 410 weight of the machine ca.: 31 tdimensions of the machine ca.: 11 x 3,44 x 4,9 m- CNC control Heidenhain iTNC 530- Tool changer 30-fold (ISO 50)- Milling head CH -45- Coolant through spindle- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 880 mm, 630 mm, 630 mm
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 T With track control Heidenhain iTNC 530 Year of Make: 2002 Travel: X 880 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( SK 40 ) With the following accessories: NC Rotary Table 0 700 mm integrated into Rigid Angle Table 1250 mm x 700 mm Clamping surface Vertical tool changer with 32 magazine positions (SK 40) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Spiral Screw Conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions
for sale is a MAHO600E which is currently not running because the emergency committee reports an error (ERR 0 23,M 02).
MTE” FIXED BED MILLING MACHINE Mod. BF-2700 CARACTERISTICS: • MACHINE LENGTH: 7000 MM • MACHINE WIDTH: 3000 MM • MACHINE HEIGHT: 3000 MM CONTROL UNIT: • MODEL: TNC 410 • BRAND: HEIDENHAIN MAIN DRIVE: • SPINDLE SPEED RANGE: 3000 1/MIN • SPINDLE TAPER: SK 50 TRAVELS : • X-AXIS TRAVEL: 2500 MM • Y-AXIS TRAVEL: 1000 MM • Z-AXIS TRAVEL: 1000 MM WORKING TABLE: • EXTERNAL LENGTH: 2700 MM • EXTERNAL WIDTH: 1000 MM • POWER CONSUMPTION: 40 KW
MTE” FIXED BED MILLING MACHINE Mod. BF-1700 FEATURES: CONTROL UNIT: • Model: TNC 410 • Brand: HEIDENHAIN MAIN TRANSMISSION: • Spindle speed range: 40 – 2500 rpm • Max spindle speed: 3000 rpm • Taper: SK 50 TRAVEL: • X-axis travel: 1500 mm • Y-axis travel: 1000 mm • Z-axis travel: 1000 mm WORK TABLE: • Table length: 1700 mm • Table width: 1000 mm • Max table load: 5500 kg
This 3-axis OKK VP600 was manufactured in 2006. It features an X-axis travel of 1,120 mm, Y-axis travel of 610 mm, and Z-axis travel of 460 mm. The machine has a maximum table load capacity of 1,200 kg and operates with a spindle speed of 12,000 RPM. If you are looking to get high-quality machining capabilities, consider the OKK VP600 vertical machining centre we have for sale. Contact us for further details.
This 3-axis DMG Mori Seiki NVX 5080 II/40 was manufactured in 2013. It features an X-axis travel of 800 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine has a weight of 6350 kg and is equipped with a rated power of 34 kVA. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki NVX 5080 II/40 vertical machining center we have for sale. Contact us for further details.
This 4-axis MORI SEIKI DuraVertical 5080 was manufactured in 2008. It features an X-axis travel of 800 mm, Y-axis travel of 530 mm, and Z-axis travel of 500 mm. The machine has a robust weight of 6100 kg and includes a rotary/indexing table, which has been unused since new. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DuraVertical 5080 vertical machining centre we have for sale. Contact us for further details.
This 5-axis DMG MU 70 ECO Mill was manufactured in 2015. It features a maximum spindle speed of 12,000 rpm and a robust integrated NC swivel rotary table. Weighing 7,800 kg, this machine is equipped with an external chip conveyor and a coolant/filtration tank unit. If you are looking to get high-quality machining capabilities, consider the DMG MU 70 ECO Mill vertical machining centre we have for sale. Contact us for further details.
This 3-axis HEDELIUS BC 60 was manufactured in 1999. It features a robust machine structure with a moving column and dual-workspace setup, ensuring efficient operation. The CNC control unit is Siemens (SINUMERIK), and it includes additional equipment such as a chip conveyor and hydraulic/coolant unit. If you are looking to get high-quality machining capabilities, consider the HEDELIUS BC 60 vertical machining centre we have for sale. Contact us for further details.
This 3-axis HAAS VP 4SS was manufactured in 2014. It features an impressive X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine operates at a spindle speed of 12,000 RPM and has a tool change count of 67,000. If you are looking to get high-quality machining capabilities, consider the HAAS VP 4SS vertical machining centre we have for sale. Contact us for further details.
This 3-axis HAAS VF 4SS was manufactured in 2018. It features an X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine operates at a spindle speed of 12,000 RPM and has a tool changes count of 69,000. If you are looking to get high-quality machining capabilities, consider the HAAS VF 4SS vertical machining centre we have for sale. Contact us for further details.
x-travel: 2000 mmy-travel: 1250 mmz-travel: 1108 mmturning speeds: 60 - 4000 U/minspindle motor: 38 / 24 kWtool taper: SK 50 tool change unit: 40 Pos.table surface area: 1600 x 1250 mmtable load: 7 tc-axis: +/- 120 °B-axis (table): 360.000 pos control: Heidenhain ITNC 530 total power requirement: - kVAweight of the machine ca.: 16,5 tdimensions of the machine ca.: 5,5 x 4 x 2,9 m5-axis machining center with- CNC control Heidenhain iTNC 530- NC rotary table with B-axis- Automatic swivel milling head (C-Axis)- 40-fold tool changer (SK 50)- Electronic handwheel- 2 Chip conveyor- Coolant device 30 l/min- Coolant through CenterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
For sale is a copy milling machine from the renowned Italian manufacturer FOM, built in 2006. The machine was overhauled at the factory. As part of the overhaul, the machine was completely dismantled and all parts were cleaned individually. The support plate was ground and galvanized. Many other parts were also re-galvanized. Some parts were repainted. The bearings on the engine were replaced, as were the bearings on the milling spindle. In addition, a new belt and a new gas strut were installed. Technical features according to the manufacturer: - Spindle with double speed - Quick-lock spindle to facilitate tool change - Horizontal clamping devices - Copy template - Diving stops - Pneumatically operated copy pen with Ø 5 and Ø 10 mm diameter - Spray mist lubrication according to the Venturi principle All information without guarantee. The machine can be shipped t ...
x-travel: 800 mmy-travel: 340 mmz-travel: 460 mmControl: Fanuc total power requirement: kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Paulimot SX4 milling machine with digital display and base frame For sale is a Paulimot SX4 milling machine in neat and fully functional condition. The machine is ideal for workshops, model making, prototype production as well as demanding hobby and small series work. Thanks to its stable construction and digital display, the SX4 enables precise and comfortable work on steel, aluminium, plastics and many other materials. Equipment: Paulimot SX4 Milling Machine Digital display / digital measuring system Stable machine substructure Stepless speed control Drilling and milling function Base frame Ready to use Technical data: Table size: approx. 820 x 240 mm Travels: X-axis: 450 mm Y-axis: 250 mm Z-axis: 320 mm Spindle holder: SK30 Stepless speed control Power supply: 230 V Condition: The machine is in used, well-maintained condition with the usual signs o ...
DECKEL MAHO DMC 63 V CNC vertical machining center was built in 2003 in Germany by DECKEL MAHO Geretsried GmbH. The machine has been regularly serviced and maintained throughout its entire service life. As part of the service work carried out, the CNC controller power supply, the coolant pump in the cooling system and the Y-axis cover scrapers were replaced. The gripper clamping force was adjusted and a new spindle covered by a one-year warranty was installed. The DECKEL MAHO DMC 63 V is designed for precision milling, drilling and threading of metal workpieces. Machining is performed by a spindle cooperating with an automatic, 24-position tool magazine. The spindle, driven by a high-power motor, reaches a maximum speed of 10000 rpm. The tool measuring probe, together with the readout system supports correct tool setting, ensuring high precision of the operations performed. All proces ...
This 5-axis Makino A51-5XR HMC was manufactured in 2013. It features a generous travel of 22 x 22 x 23.6 and is equipped with a 60-tool automatic changer and a spindle speed of 14,000 RPM. If you are looking to get high-quality machining capabilities, consider the Makino A51-5XR horizontal machining centre we have for sale. Contact us for further details.
This 3-axis Emmegi Phantomatic T3 was manufactured in 2011. It features a power rating of 7.5 kW and operates at a voltage of 400/3 V. With a machine weight of 1950 kg, it is designed for durability and efficiency. If you are looking to get high-quality machining capabilities, consider the Emmegi Phantomatic T3 vertical machining centre we have for sale. Contact us for further details.
This 4-axis OKK HM630 was manufactured in 2011. It features an X-axis travel of 1050 mm, Y-axis travel of 900 mm, and Z-axis travel of 900 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 60 tools. If you are looking to get high-quality machining capabilities, consider the OKK HM630 horizontal machining centre we have for sale. Contact us for further details.
This 5-axis POSmill H 500 U was manufactured in 2020. It features a Heidenhain TNC 640 control system and includes additional equipment such as a chip conveyor and an external cooling unit. With a nominal power of 60 kVA and extensive operational hours, this machine is well-equipped for high-quality machining tasks. If you are looking to get high-quality machining capabilities, consider the POSmill H 500 U vertical machining centre we have for sale. Contact us for further details.
This 3-axis HAAS VF-4SS was manufactured in 2019. It features impressive X/Y/Z axis travels of 1,270 x 508 x 635 mm and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer capacity of 30+1 tools and offers high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details.
