subcategories
(3rd category level)
Manufacturer:
(Category: 103)
x-travel: 560 mmy-travel: 460 mmz-travel: 450 mmControl: OSP U10 M total power requirement: 7,5 kWweight of the machine ca.: 5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 36 mmgear width: 36 mmmax. module: 10 min. module: total power requirement: 12 kWweight of the machine ca.: 11,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cone distance min./max.: 0/108 mmPitch angle min/max: 5°/84° Pitch diameter (1:1 ratio): 152 mmpitch diameter (10:1 ratio): 216 mmDiametral pitch (finest/coarsest): 1.3/8.5 Mod.Face width gear wheel max.: 35 mmspeeds:: 98-286 weight of the machine ca.: 6577 kgdimensions of the machine ca.: 1560 x 2140 x 2200 mmEquipment/accessories:-Cutting tools-Spacer angle-Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cone distance min./max.: 0-108 mmPitch angle min/max: 5°/84° Control: GE Fanuc Series 0-GC Pitch diameter (1:1 ratio): 152 mmpitch diameter (10:1 ratio): 216 mmDiametral pitch (finest/coarsest): 1.3/8.5 Mod.Face width gear wheel max.: 35 mmKnife spindle - Speed range: 41-121 U/minworking spindle speed range: 0-33.33 U/minweight: 9025 kgdimensions of the machine ca.: 2707 x 2720 x 2200 mmxmmxmmEquipment/accessories:-Knife-Chip conveyor-Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: mmgrinding length: mmmax. module: 0min. module: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: mmgrinding length: mmmax. module: 0min. module: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 4000 mmy-travel: 1200 mmz-travel: 1000 mmControl: Heidenhain type: iTNC 530 milling-head swivable +/-: 90 °spindle taper ISO: 50 table surface area: 4200x1000 mmchip conveyor: Rapid movement: 10.000 mm/minspindle: 28 kWturning speeds: 50-4000 U/mintransmission ratio: 2 : coolant: total power requirement: 70 kWweight of the machine ca.: 21,4 tdimensions of the machine ca.: mHead 2 axis controlThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are pos ...
x-travel: 200 mmy-travel: 200 mmz-travel: 400 mmControl: Siemens 840 D total power requirement: 84 kWweight of the machine ca.: 13 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
KIMLA BPF 2131 CNC router was built in 2020 in Poland by POLCOM Przemysław Kimla. The machine has only worked for 180 hours, it is like brand new. KIMLA BPF 2131 is designed for both small and medium-sized industrial plants with a diverse production profile. It allows precise machining of a wide range of materials, such as soft metals, wood and plastics. These workpieces are machined on a large vacuum table by means of a powerful spindle. The work table’s design enables separation of independent sections so that the work area can be adapted to the specific workpiece. All axes, in turn, are driven by high-performance digital AC servo drives, which guarantee excellent feed dynamics and precision during even the most intensive tasks. The BPF 2131 router is offered with an extensive range of equipment, consisting of, among others, an advanced control system and a vacuum pump. The total ...
x-travel: 4300 mmy-travel: 1000 mmz-travel: 1700 mmControl: TNC430 : : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 620 mmy-travel: 420 mmz-travel: 400 mmControl: Heidenhain TNC 124 turning speed range - spindle: 50 - 4.000 U/mintransmission ratio: 2 drive capacity - spindle motor: 6 kWtension force: 10 kNswivellable: manuell +/-45 °max. tool diameter: 125 mmmax. tool weight: 6 kgtable surface area: 400 x 800 mmT-slots: 5x14x80 max. table load: 400 kgfeed speeds: X/Y: 0 - 6.000 mm/minfeed speeds: Z: 0 - 4.000 mm/minrapid traverse: X/Y: 6 m/minrapid traverse: Z: 4 m/mintotal power requirement: 11 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,9 x 3,5 x 2,0 mIncludes:Heidenhain TNC124 point-to-point controlElectrical documentation availableCoolant system2 work lightsMachine viseVarious tool holdersVarious SK40 toolsEnclosure with 2 sliding doors available, pictures to followThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
gebr. Cover FP3 NC, built in 1983 in neat condition: Travel X: 400 mm, Y: 400 mm, Z: 400 mm Table size approx. 700 × 460 mm Tool holder SK 40 Spindle motor power typ. 2.0 – 3.0 kW Feed speed approx. 2 – 3,600 mm/min Rapid traverse up to approx. 4,000 mm/min Total weight approx. 1,800 – 2,000 kg Power supply / connection 380 V three-phase current Control Dialog 2
Key data: 400 mm, 340 mm, 350 mm
Universal Milling Machine AVIA - FNF 32 Travel paths X - 400 x Y - 340 x Z - 350 mm Table size 800 x 400 mm Spindle holder ISO 40 Speed levels 18 - 63 to 3,150 rpm Feeds 18 steps 10 to 500 mm / min Rapid traverse 1,600 mm/min Three-axis digital display Mitutoyo Central lubrication device Coolant Setup Electrical values 400 V / 4 + 1.5 KW Space requirement L - 1,750 x W - 1,700 x H - 2,000 mm Weight approx. 1,500 kg Documentation available
Horizontal machining center Okuma MB 500H with 2-fold pallet changer Year of Make: 2005 Control: Okuma OSP E100M Technical data: Spindle speed: 10 - 15,000 min-1 Drive power: 26 KW Tool holder: BT 40 Number of magazine slots: 60 IKZ: 70 bar Routes: X-axis: 800mm Y-axis: 800mm Z-axis: 800mm 4th axis: index 1° Number of pallets: 2 Pallet size: 500x500mm Accessories: - Coolant system type ConSep 2000 from Mayfran - Chip conveyor Mayfran type ConSep from Mayfran - Tool breakage monitoring in the magazine - Workpiece coolant shower
Vertical machining center Emco FAMUP MCX 750-1200 with IKZ 40bar Year of Make: 2007 Control: Fanuc 21i Running hours: 8,500h Chip Blaster High Pressure System - Max. speed 8,000 min. • Tool magazine with 24 magazine slots (ISO 40), • Tool holder ISO 40 - 24 Tightening bolts ISO 40 • Standard paintwork: Red – Grey – Black • Spindle is prepared for high-pressure cooling (port A) • Threading without compensating chuck • Central lubrication system • Chip removal from the housing via a wash-down device • Rinsing gun for cleaning work area, clamping devices, parts • Coolant device with 3 adjustable nozzles • Coolant tray 500 l • Spindle blow-out device for cleaning the holder during tool change • Lighting of the work area by halogen lamp 24 V • Two-color alarm lamp TECHNICAL DATA MCX 750 Axis X - longitudinal: 750 mm Axis Y ...
Key data: 800 mm, 650 mm, 550 mm
Universal Machining Center Deckel Maho DMU 80T Year 2000 Control: Heidenhain Running hours: ~ 1,600h Technical data: Spindle speed: 0 - 6,300 min-1 Torque Spindle: Tool holder: SK 40 Number of magazine slots: 24 X-axis: 800mm Y-axis: 650mm Z-axis: 550mm Accessories: - Coolant system - 30 SK 40 tool holders - 1x Machine Vise Machine is in very good condition. Has been used only a little
Horizontal BAZ DMG MORI NHX 4000 with 2-fold pallet changer Year of Make: 2017 Control: Celos with Sinumerik 840Dsl Operate Program running hours: 21,000h Technical data: Spindle speed: 10 - 20,000 min-1 (motor spindle speedMASTER)® Drive power: 35/25 KW Torque: 130/85 Nm Tool holder: HSK 63 Number of magazine slots: 60 - Ring magazine Travels: X-axis: 560mm Y-axis: 560mm Z-axis: 660mm C-axis: 0.001° Pallet size: 400x400mm Accessories: 2-fold pallet changer Coolant system for IKZ 70bar Chip conveyor Renishaw 3D - Pushbutton
Horizontal BAZ DECKEL MAHO DMC 60 H Linear with 2-fold pallet changer and 180 magazine locations Year of Make: 2009 Control: Sinumerik 840D Technical data: Spindle speed: 0-18,000 min-1 Drive power: 35KW Torque: Spindle mount: HSK 63 Number of magazine slots: 180 pieces Number of pallets: 2 Pallet size: 500x500mm Travels: X-axis: 630mm Y-axis: 800mm Z-axis: 650mm C-axis: 0.001° All axes have linear actuators Accessories: -Coolant system -Chip conveyor Machine was regularly serviced Video available on request.
Key data: 2700 mm, 2200 mm, 1050 mm
CNC travelling column machining centre from the manufacturer MIKROMAT Werkzeugmaschinen GmbH & Co. KG, Dresden, designed for the precise and heavy-duty machining of large-format workpieces. The machine is designed in a classic travelling column design and is particularly suitable for tool, mould and machine building with a new design. Distance spindle nose – table Vertical: approx. 300 – 1,350 mm with universal milling head (UFK): Vertical: approx. –290 to +760 mm Horizontal: approx. –55 to +995 mm in the table area: approx. 180 – 955 mm Spindle / Speeds Spindle without extension: 10 – 6,000 rpm Spindle with extension: 10 – 6,000 rpm Universal milling head (UFK): 10 – 4,000 rpm Universal milling head (UFK) Rotation around vertical axis: 360° (indexing 2.5°) Horizontal axis swivel: ±110° (indexing 2.5°) Electrical data (nameplate) Connected load: ...
Travel X/Y/Z: approx. 600mm/525mm/500mm, table dimensions X/Y: 1000mm/550mm, max. table load: 350kg, tool holder: SK40, speed: 12000rpm, tool positions: 25, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2900mm/2000mm/2300mm, weight: approx. 4500kg, control: Heidenhain, operating hours: approx. 87955h, spindle hours: approx. 21800h. Documentation available. On site inspection is possible.
Stock number: 4022 CNC BED MILLING MACHINE Manufacturer: Ibarmia, Type: ZVH 58LL Machines NO.: 05525, Year of manufacture: 2005 Specifications: Table size 3600x1050 mm Longitudinal movement (X) 3000 mm Transverse movement (Z) 860 mm Vertical movement (Y) 1000 mm Spindle Taper SK50 ISO Spindle speeds 9000 rpm Spindle motor power 25 Kw Tool changer 30 stations Control Heidenhain TNC 530 Fabr. Controlled in 5 Axis Spindle Hours 12060 Hours Accessories: Cooling by spindle 24 bar Chip conveyance. Cooling water system. Electronic handwheel Cloth Probe System Rotary table. 800mm Table rotation (B) 0.001 degrees Very well preserved. Length: 8100mm, Height: 3800mm, Width: 5500mm, Weight: 25400 kg
This 5-axis Matsuura MAM72-25v was manufactured in 2004. It features X-travel of 550mm, Y-travel of 410mm, and Z-travel of 450mm. The spindle operates up to 12,000rpm with a BT40 taper and has a tool storage capacity of 240 pieces. Consider the opportunity to buy this Matsuura MAM72-25v universal machining centre. Contact us for more information about this machine.
x-travel: 300 mmy-travel: 300 mmz-travel: 400 mmCNC-control: DIALOG 11 spindle taper ISO: 40 spindle turning speed range: 31 - 5.000 U/mintable-size: 620 x 390 mmtable load: 250 kgpower capacity: 5,5 kWfeeds -stepless-: 2 - 6.000 mm/minquill stroke: 80 mmcoolant: voltage: 380 Vtotal power requirement: 11,0 kVAweight of the machine ca.: 1,65 tdimensions of the machine ca.: 1,85 x 1,90 x 1,80 melectric cabinet: 1,35 x 0,70 x 1,70 m- Serial-No.: 2836-0175- control: DIALOG 11- electrical hand wheel- horizontal milling spindle- coolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Taiwan : 48000 €: 916.8 €: 40 -3200 U/min: ISO 40 : 600 x 500 x 400 mm: 1000 x 500 mm: 3.75 kW: 1814 kg: 1000 mm/min: 8 : 14 x 63 mm: 300 kg: 600 mm: 500 mm: 400 mm: 0 - 600 mm/min.: 0 - 600 mm/min.: 40 - 3200 : 40 - 3200 : +/- 90° °: 100 mm: manuell : 3,75 kW: 1200 x 250 mm: 160 - 660 mm: 95 - 495 (2. T-Nut), 180 mmswiveling operating panel3 axes digital read out Fagor 400ib Innovamotor for horizontal- and vertical spindle: 3,75 kWfeed motors with inverter for X/Y/Z: 0,75 / 0,75 / 0,75 kWball screw spindles for X/Y/Z axesmanual gear box for spindle speeds1 pc. long milling arbor 27 mm3 pcs. recustion sleeves (MK1, MK2, MK3)1 pc. drawing bar ISO40 for horizontal or vertical spindlespindle protection with switchtable safety guard with doors with switchesouter arbor support for horizontal spindleLED work lampautomatic lubrication for X/X/Z guidway ...
A walk-in CNC 5-axis large-format portal milling machine Fooke is available. Travel X/Y/Z: 3000mm/2500mm/1150mm, bridge height: 800mm, table dimensions X/Y: 3000mm/2500mm, spindle power: 28kW, spindle speed: 16000rpm, swivel range A: +/-100°, rotary range C: +/-181.5°, feed rate: 15m/min, rapid traverse X/Y: 20m/min, rapid traverse Z: 10m/min, rotary speed A/C: 8rpm, tool holder: HSK-63A. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/5200mm, weight: approx. 50000kg, control: Siemens 840D powerline. Documentation available. On-site inspection is possible.
A universal tool milling machine Deckel from the 1980s is available. Travel X/Y/Z: 300mm/160mm/340mm, table dimensions X/Y: 600mm/250mm, max. table load: 150kg, tool interface: SK40, speed: 2000rpm, feed rate: 1200mm/min, machine dimensions X/Y/Z: approx. 1200mm/1100mm/1500mm, weight: approx. 700kg. On-site inspection is possible.
: 600 mm: 500 mm: 400 mm: 1000x500 mm: 1200x250 mm: 40-3200 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
desba Trading
