used Milling Machines for sale

ACCUTECH Machinery CO UNIVERSAL MILLING MACHINE 2500 TO year 2016 S/N 11051102 in very good condition, used only very sporadically STANDARD FEATURES: Rapid traverse on "X", "Y" & "Z" axis. Via inverter variable feeding on "X", "Y" & "Z" axis High quality meehanite casting body GC-45/DIN-40. All types & shafts are hardened & ground. Table swivels .45° degrees left & right. All "X", "Y" & "Z" against square slide ways & table surface are hardened & ground. Motorized ARM/RAM elec. Engine is 3.75KW (5.5HP) Horizontal spindle elec. Engine is 5.5KW (7.5HP) All square slide way & dovetail way are bigger &stronger. Cast iron is either ASTM No. 40/meehanite GC-45 or DIN GG-40. TABLE Table area 1500x350mm (59x13.7") Number of "T" shaped slots 5-16H7 Distance between "T" shaped slots 60mm Rotary movement of table in both direction 45° Traverse Automatic Long ...

x-travel: 300 mmy-travel: 135 mmz-travel: 300 mmspindle turning speed range: 100-2000 U/mintable-size: 590x210 mmweight of the machine ca.: 0.6 tDigital read-out 3 axeswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 325 mmz-travel: 420 mmtable-size: 900x350 mmspindle taper ISO: 40 spindle turning speed range: 50-3400 U/minweight of the machine ca.: 1.6 tMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Procedures x way 500 mm y way 320 mm z-way 420 mm table 350 x 900 mm Speed 50-3400 RPM. Recording ISO 40

BRAND: ANAYAK YEAR: 2007 MODEL: PERFORMER 2000 APPLICATION TYPE: MILLING LOCATION: POLAND MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 5500 MM MEASUREMENTS DEPTH: 4000 MM MEASUREMENTS HEIGHT: 2900 MM MACHINE WEIGHT: 14000 KG CONTROL UNIT BRAND: HEIDENHAIN MODEL: ITNC 530 MAIN DRIVE SPINDLE SPEED RANGE: 60-3000 1/MIN SPINDLE MOTOR POWER: 24/38KW TOOL TAPER: SO 50 TO DIN 69871-AD NUMBER OF AXIS: 3+2 MOVEMENT X-AXIS MOVEMENT: 2000 MM Y-AXIS MOVEMENT: 1000 MM Z-AXIS MOVEMENT: 1100 MM TABLE OUTER LENGTH: 2200 MM OUTER WIDTH: 850 MM TABLE LOAD: 5000 KG

BRAND: ANAYAK YEAR: 2001 MODEL: V-1800 APPLICATION TYPE: MILLING LOCATION: SPAIN MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: FAGOR GINDUMAC ID: ES-MIL-ANA-2001-00001 Technical Information CONTROL UNIT BRAND: FAGOR MODEL: 8055 MAIN DRIVE SPINDLE SPEED RANGE: 60-5000 1/MIN NUMBER OF AXIS: 4 MOVEMENT X-AXIS MOVEMENT: 1600 MM Y-AXIS MOVEMENT: 820 MMZ -AXIS MOVEMENT: 800 MM TABLE OUTER LENGTH: 1800 MM OUTER WIDTH: 700 MM NUMBER OF TSLOTS: 5 DISTANCE BETWEEN: 120 MM TABLE LOAD: 3000 KG TOOLS SLOTS IN STORAGE: 24 TYPE OF TOOL HOLDER: ISO 40

BRAND: ANAYAK YEAR: 1998 MODEL: VH-2200 PRODUCTION HOURS: 21901 APPLICATION TYPE: MILLING LOCATION: SPAIN MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 4000 MM MEASUREMENTS DEPTH: 3500 MM MEASUREMENTS HEIGHT: 3000 MM MACHINE WEIGHT: 8000 KG CONTROL UNIT BRAND: FAGOR MODEL: 8025 CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 3000 1/MIN NUMBER OF AXIS: 3 MOVEMENT X-AXIS MOVEMENT: 2000 MM Y-AXIS MOVEMENT: 800 MM Z-AXIS MOVEMENT: 800 MM WORKPIECE WORKPIECE DRM: 800 MM WORKPIECE X: 2000 MM WORKPIECE Y: 800 MM WORKPIECE Z: 800 MM WORKPIECE WEIGHT: 2000 KG TABLE OUTER LENGTH: 2100 MM OUTER WIDTH: 700 MM TSLOTS SIZE: 1 DISTANCE BETWEEN: 800 MM TOOLS SLOTS IN STORAGE: NO MAX WEIGHT: 15 KG MAX TOOL DIAMETER: 200 MM MAX TOOL LENGTH: 750 MM  ...

Universal tool-feeding machine, used universal milling machine, used Type FU 250 x 1000/2 Fabr. WMW Auerbach Built: 1988 Table size/ table: 1130 x 255 mm Laengsmotion/ longit. move: X 690 mm Horizontal movement/ horiz. Move: Y 190 mm Vertical movement/ Vert. move : Z 360 mm Tool holder/taper: ISO 40 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 56 - 2800 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t Specification: Vertical head,shock head

Universal tool milling machine, used universal milling machine, used Type FU 315 - V/2 Fabr. WMW Heckert Built: 1979 Table size/ table: 1250 x 315 mm Laengsmotion/ longit. move: X: 850 mm Horizontal movement/ horiz. Move: Y: 270 mm Vertical movement/ Vert. move : Z 355 mm Tool holder/taper: ISO 50 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 28 - 1400 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t

Technical Data: Clamping table: 900 x 210 mm Movements: X axis: 500 mm Y axis: 240 mm Z axis: 500 mm Spindle: Max. milling diameter: Ø 240 mm Spindle cone: ISO 32 Spindle speed: 85 - 1300 rpm Clampings: Clampings: 3 pcs Longitudinally and transversely: 36 / 140 mm/min Motor: 2,2 kva Motor for clamping: 0,5 kva Water cooling pump: 0,15 kva Weight: 1470 kg Dimensions HxLxW: 1600 x 1350 x 950 mm Accessories: Complete with vertical head

Vertical Milling Machine Fabr. BOHLE type FS 15Year of construction 1974Table size: 1400 x 420 mmSpindle mount: ISA 50Distance spindle to stand: 400 mmSpindle speeds: 27 - 1400 rpm.Feed rates stepless: 8 - 3150 mm / minDrive power: 11 kWDimensions L x W x H approx: 2200 x 2000 x 2200 mmWeight approx: 3500 kgWith- Control pendulum- swiveling head- rapid traverse and creep speedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Description: Hydr. grooving machine table: 650 x 250 mm universal table: 300 x 200 mm traverse path head: 400 mm traverse path quill: 100 mm automatic discharge cross stroke: 200 mm spindle speed: 350 - 3500 rpm overhang: 200 mm drive: 9 kw weight: 1500 kg The machine is sold as untested.dimensions (l x w x h) approx.: 1,800 x 1,600 x 1,700 mm, weight approx.: 720 kg

CME FU2 universal milling machine. Table: 1400x300mm. Longitudinal travel: 1050mm. Cross travel: 300mm. Vertical travel: 500mm. ISO40. Hure head. Speeds range: 12. (40-1800rpm). Motor power: 7,5Kw. DRO Fagor for 3 axis.

BRAND: CMS YEAR: 2019 MODEL: Athena APPLICATION TYPE: MILLING LOCATION: UNITED KINGDOM MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: OSAI MODEL: OPEN M NUMERICAL CONTROL MAIN DRIVE SPINDLE SPEED RANGE: 24000 1/MIN TOOL TAPER: HSK63F NUMBER OF AXIS: 5 MOVEMENT X-AXIS MOVEMENT: 3370 MM Y-AXIS MOVEMENT: 1500 MM Z-AXIS MOVEMENT: 1200 MM B-AXIS MOVEMENT: +/- 120º MM C-AXIS MOVEMENT: +/- 360º MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - COOLING: BY LIQUID - CX5: UNIVERSAL HEAD WITH AUTOMATIC TOOL CHANGE - UNIVERSAL HEAD WITH TWO ROTATING AXES - 6-PLACE TOOL CHANGING MAGAZINE - COLD AIR GUN - REMOTE DIAGNOSTICS - VACUUM SYSTEM - AUTOMATIC DOORS

BRAND: CORREA YEAR: 2007 MODEL: Prisma 35 APPLICATION TYPE: MILLING LOCATION: SPAIN MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 17000 KG CONTROL UNIT BRAND: HEIDEINHAIN MODEL: iTNC 530 MAIN DRIVE NUMBER OF AXIS: 3 MOVEMENT X-AXIS MOVEMENT: 3500 MM Y-AXIS MOVEMENT: 1000 MM Z-AXIS MOVEMENT: 1000 MM WORKPIECE WORKPIECE WEIGHT: 5000 KG TABLE OUTER LENGTH: 3500 MM OUTER WIDTH: 900 MM DISTANCE BETWEEN: 200 MM TOOLS TYPE OF TOOL HOLDER: ISO-50 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - INCLUDE TOOLS

Table 1250x320m, SK50, X-900mm, quill ole, head swivel, rapid traverse To be visited under electricity. Functional

Universal tool milling machine make DECKEL type FP 1Mash. -No: 54203/08Technical specifications:Longitudinal movement of the table X 250/245 mmTransverse movement of the headstock Y 150 mmVertical movement of the table Z 340/335 mmSpindle mount ISA 40Speeds 40 - 2000 rpmvertical table slide 550 x 195 mmQuill stroke of the vertical milling head 60 mm12 feeds longitudinal and vertical 9.5 x 475 mm / minDrive power 1.2 kWDimensions 700 x 1000 x 1600 mmWeight approx 560 kgWith- Digital display- separate control cabinet- Chip collecting panused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal tool milling machine make DECKEL type FP 1Mash. -No: 54833/08Longitudinal movement of the table X: 250/245 mmTransverse movement of the headstock Y: 150 mmVertical movement of the table Z: 340/335 mmSpindle mount: MK 412 Hor.-speeds: 60 - 1200 U / min12 Vert.-speeds: 95 x 1900 rpmvertical table slide: 550 x 195 mmQuill stroke of the vertical milling head: 60 mm12 feeds longitudinal and vertical: 9.5 x 475 mm / minDrive power: 1.2 kWDimensions: 700 x 1000 x 1600 mmWeight approx: 560 kgWith- rigid angle table- several tool holders- original vice- separate electrical cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table size 210 x 600 mm Transverse travel X 300 mm Longitudinal travel Y 150 mm Vertical travel Z 340 mm Speed 40 - 2000 rpm Tool holder SK 40 Without vice Accessories: Vertical milling head various milling mandrels Tool cabinet

Universal tool milling machine make DECKEL type FP 2Mash. -No: 45731Table length travel: 390/400 mmTable height path: 390/400 mmHeadstock cross-section: 190/200 mmHorizontal spindle extendable: 100 mmTable mounting surface: 740 x 255 mm18 spindle speeds: 40-2000 rpm.Spindle mount: ISA 4018 automat. Feeds: 8 - 400 mm / minRapid traverse: 1200 mm / minDrive power: 2.2 kWDimensions: 1550 x 1400 x 1410 mmWith- rigid angle tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Description: Control: Grundig Dialog 11 Table length: 800 mm Table width: 400 mm X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Tool holder: Sk 40 Spindle speed: 0 - 4000 rpm, Dimensions: Control cabinet: 2500 x 1900 x 1100 Machine: 2000 x 2200 x 2100dimensions (l x w x h) approx.: 3,300 x 2,500 x 2,100 mm, weight approx.: 2,000 kg

Description: X-way 400 mm Y-way 400 mm Z-way 500 mm 4th axis Control: Grundig DIALOG 11 Rotary table Spindle speeds - infinitely variable: 18 - 6,000 rpm Total power requirement: 15.00 kW, Dimensions: Machine: 2400 x 1950 x 2250 Control cabinet: 1800 x 700 x 1500dimensions (l x w x h) approx.: 2,650 x 2,400 x 2,250 mm, weight approx.: 3,500 kg

CNC toolmill cover FP 3 NC Dialog 11 Used machine (very good) Control type Cnc Built 1990 Hours K.a. Dimensions 1800x1700x2000 Weight 2000 kg Location Haiger Description Universal tool milling machine of the brand lid suitable for tooling, fixture construction, training as well as mold making • Travel distances: 400x400x400mm • Control: Dialog 11 Technical data • Control CNC Dialog 11 • Table 600x400mm • Longitudinal path (X,Y,Z axis) 400x400x400mm • Tool changer no • Tool holder: ISO 40 • Vertical spindle speeds: 31.5-3150rpm • Feeds 2-3600mm/min • Connection 50 Hz 3x 380V • Spindle motor 3.4KW

Lid FP 4 A Used machine (very good) Control mode Conventional Built in 1992 Operating hours approx. 500h Price 12,000 € net plus VAT Dimensions 2500x2500x1900 Weight 2000 kg Location Haiger Description Universal tool milling machine of the brand lid suitable for tooling, fixture construction, training as well as mold making Travel: 560/500/450mm Control : Dialog 11 Technical data Control CNC Dialog 11 Table 900x530mm Longitudinal path (X,Y,Z axis) 560/500/450mm Tool changer no Tool holder: ISO 40 Vertical spindle speeds: 31.5-5000rpm

Description Universal tooling machine from Lid suitable for tooling, fixture construction, training as well as mold making Technical data Year of construction / YOM 1991 Speeds / Spindle 63 - 6300 rpm Steuerung Control CNC Grundig Dialog 11 Vorschübe / Feeds 2 - 3000mm/min Tisch / Table 910 x 530mm Recording / Taper ISO 40 Way / Travel (X,Y,Z) 600x500x500mm Weight /Weight ca 1830kg Changer / Tool changer No Dimensions / Dimension 2500x2000x2000mm Travel: 600x500x500mm Speed: 31.5 - 6300 rpm The machine comes from a tool making and has been regularly serviced.

Milling machine, control Contur 3. Collet bore up to 25 mm Through hole up to 25 mm Center height of the clamping surface 90 mm Tip height of the counter holders 100 mm Power 4,4 kW Weight approx. 2 t

Lid FP 4 MA Used machine (Very good) Control type CNC Built in 1990 Operating hours n/a Price 8,000 net plus VAT Dimensions 2500x2000x2500 Weight 1800 kg Location Haiger Description Universal tool ingescent machine of the brand lid suitable for tooling, fixture construction, training as well as mold making Travel: 465x385x380mm Control: Contour 2 Technical data Technical data: Lid FP4 MA (527) Built in 1992 Control CNC Hand / Contour 2 Table 800x465mm Laengsweg (X,Y,Z axis) 465x385x380mm Tool changer no Tool holder: ISO 40 Vertical spindle speeds: 31.5-3150rpm Vorschuebe 2-4000mm/min Connection 50 Hz 3x 380V Spindle motor 4KW Machine weight approx. 1900kg Dimensions 2800x2000x2500mm

Description: Movement in X/Y/Z: 300/150/340 mm Speed (max.): 2.000 rpm Workpiececlamping: Machine vice, Allmatic Type 100 including Tilt-Swiveltable FVW, digital display and connecting cable Transportdimensions: 1.400 x 1.200 x 1.800 mm, ca. 800 kgdimensions (l x w x h) approx.: 1,200 x 1,200 x 1,700 mm, weight approx.: 800 kg

Description: overhauled table dimensions 600 x 200 mm head 90°  , please also take a look at the videos of this machine dimensions (l x w x h) approx.: 1,200 x 1,100 x 1,700 mm, weight approx.: 900 kg

x-travel: 300 mmy-travel: 150 mmz-travel: 340 mmtable-size: 600x260 mmspindle taper ISO: 40 spindle turning speed range: 40-2000 U/minweight of the machine ca.: 0.7 tVisit us on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description x-path: 300 mm y-way: 150 mm z-way: 340 mm Clamping area: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed levels working spindle: 8 Feed range: 10 - 500 mm/min Feed levels: 8 Pinolene stroke: 60 mm Spindle holder: SK 40 Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.90 x 1.10 x 1.55 m Universal tool milling machine in very good condition, vertical head rotatable +/- 90° incl. drill pin with stroke 60 mm, horizontal spindle, automatic feed in X and Z direction, universal swivel table, turning and tilting range+/- 30°, swivel range+/- 90°, separate control cabinet + main switch incl. digital display (new)

Lid FP 1 in very nice condition x-path: 300 mm y-way: 150 mm z-way: 340 mm Clamping area: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed levels working spindle: 8 Feed range: 10 - 500 mm/min Feed levels: 8 Pinolene stroke: 60 mm Spindle holder: SK 40 Digital display Z-502 Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.90 x 1.10 x 1.55 m Universal tool milling machine in good condition, vertical head rotatable +/- 90° incl. drill pin with stroke 60 mm, horizontal spindle, automatic feed in X and Z direction, universal swivel table, turning and tilting range+/- 30°, swivel range+/- 90°, separate control cabinet + main switch

x-travel: 300 mmy-travel: 160 mmz-travel: 340 mmtable-size: 600x210 mmspindle turning speed range: 40-2000 U/minweight of the machine ca.: 1 tdimensions of the machine ca.: 1.6x1.3x1.8 mActive digital read-out HEIDENHAIN TNC 123More details on www.marcels-maschinen.chThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used FP 1 Active X 300 mm / Z 340 mm / Y 160 mm Bird Lubrication 40 - 2000 rpm Feed and rush in X and Z axis

fully functioning used 3 axis milling machine, brand lid, type FP2, with vice, and many accessories.

Lid FP 2 NC Used machine (good condition) Control type NC Built in 1987 Operating hours n/a Price 9,900 € net plus VAT Dimensions 1325 x 1315x 1845 Weight 1450 kg Location 35708 Haiger The machine was part of a training workshop, it is made of 1st hand and has few hours of operation. Travel routes; x = 300, Y = 300, Z = 400 mm Speed range: 31.5 - 3150 rpm DESCRIPTION CNC milling machine lid FP 2 NC year: 1987 Control: 3-D web control dialog 4 Can also be operated manually via handwheels Travel paths; x = 300, Y = 300, Z = 400 mm Voltage: 380 volts Speed range: 31.5 - 3150 rpm power, 1.6/ 2.0 kW WZ recording, SK 40 Hydraulic Tool Clamping Rigid Angular Table Table Size: 620 x 390 mm Electronic handwheel Coolant device Machine light Spray protection cabin Accessories: operating and programing instructions, electrical circuit diagrams, WZ-holders Weight: 1450 kg Dimensions: L  ...

Tool Milling Machine Lid FP3 Part Overhauled 07-07-089 Number: 07-07-089 Delivery time: immediately Machine data Year of construction: ca. 1980 L x W x H: approx. 2000 x 1600 x 1900 mm Weight: approx. 1500 kg Very good general condition PARTIALLY OVERHAULED Specifications Digital display: 3 – axes – digital displayNEW Travel: X – axis: approx. 500 mm Y – axis: approx. 300 mm Z – axis: approx. 380 mm Table clamping surface: approx. 800 x 420 mm Spindle: Speed range: approx. 40 – 2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual Feeds & rapid paths: in all 3 axes Feed range: approx. 10 – 500 mm/min Rapid passages: approx. 1.5 m/min Accessories -Vertical & Horizontal Milling Device -Drilling pinoles -Coolant device -Complete machine documentation -Various clamping wrenches ...

Universal milling and drilling machine Manufacturer: Lid Type: FP3NC Year of construction: 1986 Control: CNC path control DECKEL Dialog 4 Traverse paths: X/Y/Z: 400 x 400 x 400 mm Tool holder: SK40 DIN 69871 Tightening system: Hydromechanical clamping system SK40 with tightening bolt DIN 2080 or DIN 69872 Working spindle: Vertical and horizontal, vertically and horizontally 80 mm manually extendable Milling head manually swivelling +/- 90° Folding head: Due to the hydraulically supported folding head is a very fast and convenient change from vertical to horizontal machining. Range: 31.5 – 6300 rpm geometrically stepped Direct gearbox for maximum torque / Milling performance at the working spindle Feed: 2 – 3600 mm / min. infinitely variable feed Rapid traverse: 4000 mm / min. Angle table: 700 x 460 mm load 350 kg Chip anne Without  ...

Universal - Milling and drilling machine Manufacturer: Lid Type: FP4 NC Control: 3-axis path control Siemens 840D SL Year of construction: 2020 Refurbished Traverse paths: X/Y/Z: 560 x 500 x 450 mm Tool holder: SK40 DIN 69872 Tightening system: Hydromechanical clamping system SK40 with tightening bolt DIN 2080 or DIN 69872 Working spindle: Vertical and horizontal Manually extendable quill vertical 80 mm Milling head manually swivelling +/- 90° Range: 31.5 – 6300 rpm geometrically stepped Direct gearbox for maximum torque / Milling performance at the working spindle Feed: 1 – 3600 mm / min. infinitely variable feed Rapid traverse: 6000 mm / min. Angle table: 530 x 390 mm load 450 kg Extended support arm DXF Reader

Universal milling machine Deckel FP4M in very nice operational condition and good equipment. With tilt-tilt-swivel table Clamping surface: 710x430mm Speed: 50 - 2500 rpm Feed: 8 – 630 mm/min Drive power: 3.7 / 4.4 KW Spindle brake Rapid traverse: 1300 mm/min Travel X/Y/Z: 500/400/400 mm Vertical milling head on spindle block 150mm movable Vertical quill & horizontal quill - SK40 Tightening thread: M16 Cefppiit2a Vertical quill 90mm extendable Machine number: 2203-2262 Weight: ca.1550 Kg Equipment: 3 axis digital display Heidenhain Coolant device Chip anne Central lubrication (manually operated) The machine can be energized and tested on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or inten ...

! Used! FP 4MK SK40 / with 3- axles - ACTIVE - digital display Heidenhain Control: Digital display Heidenhain T NC111 Speed: 50 - 25000 rpm Feed: 8 - 630 mm/min continuous Rapid speed: 3 m/min Drive power: 6 kW 2830 rpm Travel: X/Y/Z 500/400/400 mm Angular table: Rigid angular table 700 x 400mm max load 450 kg Design: Vertical & horizontal spindle; Vertical pinole 80mm extendable Milling head can be swivelled manually Options: Machine Light

Milling machine from a training workshop in very good condition Manufacturer lid Type FP1 Active

Description: Templatetabelsize: 520 x 320 mm Clamping surface: 360 x 200 mm including connecting cable Transportdimensions: 1.400 x 1.100 x 1.800 mm, ca. 620 mmdimensions (l x w x h) approx.: 1,250 x 1,100 x 1,700 mm, weight approx.: 600 kg

BRAND: DECKEL MAHO YEAR: 1999 MODEL: DMC 60H PRODUCTION HOURS: 48364 APPLICATION TYPE: MILLING LOCATION: GERMANY MACHINE TYPE: MACHINING CENTERS (UNIVERSAL) AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 4800 MM MEASUREMENTS DEPTH: 5000 MM MEASUREMENTS HEIGHT: 2800 MM MACHINE WEIGHT: 11400 KG CONTROL UNIT BRAND: SIEMENS MODEL: SINUMERIK 840D MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 0 - 15000 1/MIN SPINDLE MOTOR POWER: 13 / 20 KW NUMBER OF AXIS: 4 MOVEMENT X-AXIS MOVEMENT: 600 MM X-AXIS RAPID TRAVERSE: 1 - 40000 MM/MIN Y-AXIS MOVEMENT: 560 MM Y-AXIS RAPID TRAVERSE: 1 - 40000 MM/MIN Z-AXIS MOVEMENT: 560 MM Z-AXIS RAPID TRAVERSE: 1 - 40000 MM/MIN TOOLS MAX WEIGHT: 10 (200) KG MAX TOOL DIAMETER: 90 (MAX. 160) MM MAX TOOL LENGTH: 350 MM TYPE OF TOOL HOLDER: SK 40 MEDIA MAIN ELECTRONIC CONNECTION: 4 ...

Description: - serial no.: 2860-171 - operating voltage: 400 V - frequency: 50/60 HZ - nominal current: 24 A - control system: GRUNDIG DIALOG 12 - tool holder: SK 40 - table dimensions: 800 x 480 mm - travels: X: approx. 500 mm, Y: approx. 400 mm, Z: approx. 500 mmdimensions (l x w x h) approx.: 2,600 x 2,400 x 2,100 mm, weight approx.: 3,000 kg

Machine : Vert. Head Make : DECKEL, MAHO, WMW, ... Are all swivel and with quill ! A - Universal milling head, COVER, from FP3, SK40, with quill stroke 80mm, tool clamping with hydraulics and control panel. swivel, price: 1600,- B - Universal milling head, MAHO, SK40, with quill and autom. Tool clamping, swivelling, L-33cm, B-30, H-60, swivel device, flange φ approx. 250mm Price : 1600,- C - Milling head WMW, SK40, for FUW 200/I ; FUW 200/II ; FUW 250/IV , FUW 315/III With quill for drilling or grooving by hand, stroke: approx. 80mm, swivelling, Holder flange : 185x175mm, spline shaft profile φ 25, φ 21, 4 grooves 8mm Dimensions: Depth: 33cm ; Width : 22cm ; Height : 45cm; Weight: approx. 60KG PRICE : € 1400,- Would also have milling spindles - SK30 - SK40

Description: Overhaul in 2003, SK50 milling spindle, Fidea C20 control, table size 3,000 x 1,400 mm, travel X/Y/Z: 2,300 x 1,400 x 1,500 mm, table load 17,000 kg, drive: Siemens Simudrive 611, serial no.: 6293dimensions (l x w x h) approx.: 7,000 x 4,200 x 5,400 mm, weight approx.: 45,000 kg

BRAND: ELUMATEC YEAR: 2013 MODEL: SBZ 140/60 APPLICATION TYPE: MILLING LOCATION: GERMANY MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY Technical Information MAIN DRIVE SPINDLE SPEED RANGE: 24000 1/MINSPINDLE MOTOR POWER: 9,5 KWNUMBER OF AXIS: 4 MEDIA MAIN ELECTRONIC CONNECTION: 400 V/ 50 HZ Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - TRAVEL X - AXIS 6400 MM, 7600 MM, 9700 MM - TRAVERSE PATH Y-AXIS 850 MM, 65 M/MIN - TOOL CHANGER 8 TOOLS, FURTHER TOOL PLACES ON REQUEST - TRAVERSE PATH Z-AXIS 650 MM - SWIVEL ANGLE A - AXIS 0 - 180 ° FREELY PROGRAMMABLE IN 1/10° STEPS - COMPRESSED AIR CONNECTION 7 BAR - AIR CONSUMPTION PER MINUTE 180 L WITH SPRAYING - CLAMPING DEVICE FOR DOUBLE BAR MACHINING - CHIP CONVEYOR BELT - BARCODE SCANNER QUALITATIVE MACHINE BENEFITS: - STATIONARY TOOL MAGAZINE - ANGULAR MILLING HEADS - NETWORK  ...

4-axis digital anilam Variable spindle speed Variable xyz power supplies ISO 40 recording For more technical information see photo.

X-axis: 775 mm Y-axis: 250 mm Z-axis: 425 mm Table dimensions: 1100 x 240 mm Spindle Holder: ISO40 Spindle speeds: 48 - 1500 rpm. Equipped with: - Feed on all axes -Vice -Cap - Milling tools - Useful storage - Horizontal spindle Motor power: 2.2 kW Country of origin: Spain Machine LxWxH: 1600 x 1300 x 1600 mm Machine weight: 1200 kg