milling machines used for sale (2,471)

This 4-axis DOOSAN DNM 5700 was manufactured in 2021, 3 units available. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a 30-position tool magazine and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details.

GeneralUniversal machining centre; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal1000 mmCross1250 mmVertical1000 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minChip removalChip removal: 2 worm conveyors in the machine bed convey into a chip conveyor (scraper flight conveyor), with interval control, placed at right angles. discharge height: 950 mm / 37.4 in width: 380 mm / 14.9 in NC rotary table with pallet changerType of Measuring system Direct measuring system Table surface 1000 x 800 mmCentre bore 50H6 mmMaximum load (table centre) 2000 KgSlot width 18 mmNumber of Slots 7 Distance between T-Slots 100 mmRotation speed max.4. Axis 35 rpm4. Axes (swivelling range) 360 x 0,001 degreeCabineFull protection cabin Uni. head with controlled B-axisUniversal milling head with ...

General2-Axes Universal Turning Center with driven tools, C-axis; Control: DMG MORI Slimline Fanuc i Series Working areaSwing diameter over guide ways700 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmBar diametre80 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmSlide 1Longitudinal stroke830 mmTransverse stroke271 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,26 x 2,44 x 1,95 (4,3 x 2,44 x 1,95) mWeight approx.6500 KgPre-setting PackagePre-setting package: Option includes: - tool pre-setting probe MARPOSS - chip conveyor with right side discharge instead of chip tank  ...

General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® 0i-F Plus on Fanuc Touch CNC Working areaSwing diameter over guide ways700 mmSwing diameter over transverse guideway370 mmTurning diameter400 mmBar diameter max.80 mmSlide 1Longitudinal stroke755 mmTransverse stroke276 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range - 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)426 NmWork spindle (left)Spindle noseA2-8 Bar diametre80 mmSpindle diametre on front bearing130 mmMain drive 2Drive power (100% DC)13 kWDrive power (40% DC)14 kWSpeed range- 5000 rpmTorque (100% DC)171 NmMax. torque (4 ...

with 3-axis digital display, Fabr. HEIDENHAIN, with coolant device, machine light, angle milling head and counter holder

with 3-axis digital display, Fabr. HEIDENHAIN, with coolant device and machine light

with 2-axis digital display, Fabr. HEIDENHAIN, with angle milling head, 2 dividing heads, additional clamping table, counter holder, 3-jaw chuck, various interchangeable wheels, machine light and steel transport trolley

with 3-axis digital display, Fabr. HEIDENHAIN, with coolant device and machine light

This 4-axis HELLER H5000 was manufactured in 2009. It features a Fanuc 310i control system, ensuring reliable operation. If you are looking to get high-quality machining capabilities, consider the HELLER H5000 horizontal machining centre we have for sale. Contact us for further details.

This 3-axis AXA VHC-3-3000-M/E was manufactured in 2002. It features an impressive X-axis travel of 2940 mm, Y-axis travel of 900 mm, and Z-axis travel of 950 mm. The machine includes a robust table size of 4350 x 900 mm and a spindle speed range of 40 - 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the AXA VHC-3-3000-M/E vertical machining centre we have for sale. Contact us for further details.

This 5-axis POSmill H 800 U was manufactured in 2015. It features a maximum spindle speed of 18,000 rpm and a table size of Ø 800 mm, with a maximum table load of 1,200 kg. The machine includes a 96-fold tool changer and advanced Heidenhain control unit. If you are looking to get high-quality machining capabilities, consider the POSmill H 800 U vertical machining centre we have for sale. Contact us for further details.

This 3-axis DMG MORI MILLTAP 700 was manufactured in 2013. It features a spindle speed of 24,000 rpm and a travel distance of 700 mm in the X-axis, 420 mm in the Y-axis, and 380 mm in the Z-axis. If you are looking to get high-quality machining capabilities, consider the DMG MORI MILLTAP 700 vertical machining centre we have for sale. Contact us for further details.

This 3-axis DMG MORI ecoMill 800 V was manufactured in 2015. It features an X-axis travel of 800 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a spindle speed of 12,000 rpm and a BT40 taper. If you are looking to get high-quality machining capabilities, consider the DMG MORI ecoMill 800 V vertical machining centre we have for sale. Contact us for further details.

Machine was regularly serviced, was in operation until recently, with documentation and accessories, an on-site inspection is possible.

This 4-axis Mazak VCN-530C was manufactured in 2017. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine includes a robust worktable size of 1,300 x 550 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the Mazak VCN-530C vertical machining centre we have for sale. Contact us for further details.

This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2018. It features a maximum workpiece diameter of 500 mm and a maximum table load of 200 kg. The machine is equipped with a 19-inch colour touchscreen and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality simultaneous 5-axis machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details.

MTRent MTCut V110TH - CNC milling machine - Mount: SK40 - X/Y/Z: 1100 / 610 / 610 mm - Heidenhain CNC control - Incl. milling tools, technical documents and operating instructions - Switch-on time: 21295 h - Spindle time: 6661 h - Year of construction 2015 Technical data Axles: - Travel X: 1100 mm - Travel Y: 610 mm - Travel Z: 610 mm - Rapid traverse X/Y/Z: 32 m/min - Feed: 1 - 12000 mm/min - Positioning accuracy: ± 0.005 mm - Repeatability: ± 0.003 mm - Spindle nose table: 120 - 730 mm - Guides X/Y/Z: Linear 45 / 45 / 45 mm - Machine bed: cast iron Machine table: - Dimensions: 1250 x 610 mm - Max. table load: 900 kg - T-slots in the table: 5 - T-slots width: 18 mm H8 - T-slot spacing: 100 mm Spindle: - Speed: 10000 rpm - Torque (40% ED): 256 Nm - Power (40% ED): 24 kW - Spindle cooling: Oil - Tool holder: SK40 - Tightening bolts: DIN 69871/72  ...

Milling machine Wagner Ares tc 450

Milling machine Emco PCMill 50

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 Uni milling head with controlled B axis HSK-A 63Universal milling head with controlled B axis HSK-A 63 Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machining NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turni ...

This 3-axis Hyundai Wia F 960M vertical machining center was manufactured in 2014. It features a large table size of 2700 x 950mm, capable of handling loads up to 4500kg. Equipped with a 22 kW spindle power and a maximum speed of 8000 RPM, it includes a 30-position tool magazine. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia F 960M machine we have for sale. Contact us for more information.

This 5-axis Hyundai Wia HI-MOLD 750-5A vertical machining centre was manufactured in 2014. It features a spindle speed of 20,000 RPM, a tool magazine with 30 slots, and a rapid traverse rate of 50 m/min in all axes. The table can handle up to 500 kg, tilting from +30˚ to -120˚. Consider the opportunity to buy this Hyundai Wia HI-MOLD 750-5A vertical machining centre. Contact us for more information about this machine.

This 4-axis Mandelli RS1500U horizontal machining centre was manufactured in 2006. It features an impressive X-axis travel of 2,800 mm, Y-axis travel of 2,000 mm, and Z-axis travel of 1,500 mm. The machine is equipped with a maximum spindle speed of 4,000 rpm and a tool capacity of 120. If you are looking to get high-quality machining capabilities, consider the Mandelli RS1500U machine we have for sale. Contact us for further details.

This 5-axis Hurco VC500i was manufactured in 2019. It features a robust control unit with WinMax software, ensuring efficient operation. The machine includes additional equipment such as a chip conveyor and a Spaleck finishing unit, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the Hurco VC500i vertical machining centre we have for sale. Contact us for further details.

This 3-axis Enshu ES450 was manufactured in 2001. It features an X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 460 mm. The machine is equipped with a Fanuc 16i-MB control unit and has a tool magazine capacity of 20 tools. If you are looking to get high-quality milling capabilities, consider the Enshu ES450 vertical machining centre we have for sale. Contact us for further details.

This 3-axis Hurco VMX42T vertical machining center was manufactured in 2007. It features a robust table size of 1,270 × 610 mm, supporting a maximum load of 1,500 kg. Equipped with a high-speed spindle capable of up to 12,000 rpm and a BT40 taper, it ensures efficient machining. The machine includes a 24-tool automatic changer and rapid traverse rates of 24 m/min. Contact us for more information about this machine.

This 5-axis DOOSAN VC 630/5AX was manufactured in 2017. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a robust table size of Ø 630 mm and can accommodate workpieces up to Ø 730 x 500 mm with a maximum weight of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5AX vertical machining centre we have for sale. Contact us for further details.

Max. speed: 7500rpm, voltage: 230V, current consumption: 8.6A, frequency: 50Hz, power: 2000W. The machine can be controlled using a standard computer. The A-axis can be controlled and positioned via the software. Including software/CD. Without PC. An on-site inspection is possible.

This 3-axis DMG DMU60 Monoblock was manufactured in 2014. It features a Heidenhain iTNC 530 control unit, ensuring precision and reliability. The machine operates at a voltage of 400 V and has a power rating of 41 kVA. If you are looking to get high-quality machining capabilities, consider the DMG DMU60 Monoblock vertical machining centre we have for sale. Contact us for further details.

This 3-axis Enshu ES400 was manufactured in 2006. It features a spindle speed of 13,000 rpm and a tool magazine capacity of 20 tools plus 1 in spindle. The machine has an X-axis travel of 500 mm, Y-axis travel of 400 mm, and Z-axis travel of 380 mm. If you are looking to get high-quality milling capabilities, consider the Enshu ES400 vertical machining centre we have for sale. Contact us for further details.