Manufacturer:
(Category: 102)
CNC bar-fed lathe, year 2002, 65000 operating hours, CNC 16i-T. Used machine in good condition. More info & price on IndustrialBuyer.
sliding headstock CNC lathe, year 2014, 45000 operating hours, CNC 32-iB. Used machine in good condition. More info & price on IndustrialBuyer.
CNC bar-fed lathe, year 2011, 37000 operating hours, CNC 31i-B. Used machine in good condition. More info & price on IndustrialBuyer.
Workpiece length: 3000mm, swing over bed/carriage: 800mm/570mm, turning diameter without gap bridge: 1035mm, gap bridge length: 330mm, bed width: 400mm, travel X/Z: 420mm/230mm, max. spindle speed: 1600rpm, spindle bore: 105mm, spindle mount: D1-8, spindle taper: MT5, tailstock taper: MT5, tailstock quill diameter: 90mm, tailstock quill stroke: 235mm, main drive motor power: 7.5kW. Machine dimensions X/Y/Z: approx. 4740mm/1140mm/1910mm, weight: approx. 3870kg. Including measuring system. Documentation available. An on-site inspection is possible.
centre height: 400 mmcentre distance: 2.000 mmturning diameter over bed: 810 mmcontrol: WEILER D3 turning diameter over slide rest: 510 mmturning length: 2.000 mmspindle head: DIN55027 Gr.11 spindle diameter: 150 mmspindle bore: 106 mmTurning Speed - Range 1: 1 - 450 U/min.power capacity at 60% / 100 % load: 37,00 / 30,00 KWmax. torque at 60% / 100% load: 3.205 / 2.599 NmTurning Speed - Range 2: 4 - 1.800 U/min.power capacity at 60% / 100 % load: 37,00 / 30,00 KWmax. torque at 60% / 100% load: 813 / 659 Nmface slide travel: 410 mmupper slide-support travel: 140 mmlongitudinal feed: 0 - 5 mm/Uface feed range: 0 - 5 mm/U.power feed longitudinal: 20.000 Nfeeding force facing: 10.000 Nrapid travel - longitudinal/face: 10 / 5 m/mintool taper: Capto C6 tailstock quill diameter: 115 mmtailstock quill stroke: 225 mmtailstock quill taper MT: 6 thread - mm pitch: 0,1 - 250 mmthread - inch: 1/4 - ...
Vöest, E50/2000, Lining, Multifix, 15KW, Mas. No. 07351501
- Control: SIEMENS SINUMERIK 840-C - Max. rod Ø: 65 mm - C-axis - Turntable main spindle: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Revolver 2: 8 stations, 4 of which are powered - Speed applied Operating time: 4,000 1/min - Both turrets with internal cooling - High-pressure system - Chip conveyors - Bar feeder IRCO SiMag 65 - Max. rod length: 3200 mm Dimensions LxWxH: - Machine 3400 x 1700 x 1800 mm - Bar feeder 4000 x 1000 x 1400 mm - Chip conveyor 3000 x 1100 x 1600 mm Total weight: approx. 6,000 kg
Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg
Manufacturer: TRAUB Model: TNX 65-42 Year: 2012 Condition: Used Stock number: 9486 Control system: Traub TX 8i-s Number of Spindles: 2 pieces Maximum main spindle power: 24 kW Maximum spindle speed: 5000 1/min Max. rod diameter: 65 mm Lathe chuck diameter: 175 mm Length: 5500 mm Width: 2700 mm Height: 2560 mm Weight: 11500 kg The main spindle was repaired (06/2026). Equipment: Bar Feeder Chip conveyor Oil Mist Separator Coolant tank Coolant coolers Tool Holder Chuck
Manufacturer: TRAUB Model: TNX 65/42 Year: 2008 Condition: Used Stock number: 9485 Control system: Traub TX 8i-s Maximum length of travel in the X-axis: 175 mm Maximum length of travel in the Y-axis: 40 mm Maximum feed in the Z-axis: 650 mm Number of Spindles: 2 pieces Maximum main spindle power: 24 kW Maximum spindle speed: 5000 1/min Max. rod diameter: 65 mm Lathe chuck diameter: 175 mm Length: 5500 mm Width: 2700 mm Height: 2300 mm Weight: 10000 kg The main spindle was repaired (04/2026). Equipment: Chip conveyor Oil Mist Separator Coolant tank Tool Holder Chuck Spare parts
vertical CNC turning center, year 2016, CNC 32iB. Used machine in good condition. More info & price on IndustrialBuyer.
CNC bar-fed lathe, year 2001, CNC 16i - T. Used machine in good condition. More info & price on IndustrialBuyer.
twin-spindle chucking lathe, year 2002, CNC 21 TB. Used machine in good condition. More info & price on IndustrialBuyer.
vertical CNC turning center, year 1996, CNC 18 - M. Used machine in good condition. More info & price on IndustrialBuyer.
CNC bar-fed lathe, year 1999, CNC 18i-T. Used machine in good condition. More info & price on IndustrialBuyer.
vertical CNC turning center, year 2001, CNC 840D. Used machine in good condition. More info & price on IndustrialBuyer.
vertical turret lathe, year 2014, CNC 0i Mate - TD. Used machine in good condition. More info & price on IndustrialBuyer.
CNC lathe with driven tools, year 1996, CNC 0-T. Used machine in good condition. More info & price on IndustrialBuyer.
twin-spindle CNC lathe, year 2008, CNC 180i-TB. Used machine in good condition. More info & price on IndustrialBuyer.
sliding headstock CNC lathe, year 2006, CNC FS18i-TA. Used machine in good condition. More info & price on IndustrialBuyer.
vertical CNC turning center, year 2005, CNC 840 D. Used machine in good condition. More info & price on IndustrialBuyer.
twin-spindle chucking lathe, year 2000, CNC 18i-TB. Used machine in good condition. More info & price on IndustrialBuyer.
twin-spindle chucking lathe, year 1999, CNC 18-T. Used machine in good condition. More info & price on IndustrialBuyer.
sliding headstock CNC lathe, year 2012, CNC 31i - B. Used machine in good condition. More info & price on IndustrialBuyer.
This 5-axis Mazak INTEGREX 200-3 was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum turning length of 1045 mm. The machine is equipped with a main spindle speed of 5000 rpm and a milling spindle speed of up to 12000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX 200-3 machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 2008. This MORI SEIKI NL 3000 MC/700 features a maximum turning diameter of 430 mm and a turning length of 713 mm. It includes a 12-station turret for efficient tool changes and operates at a spindle speed of 3000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL 3000 MC/700 machine we have for sale. Contact us for further details.
This 3-axis HYUNDAI KIA SKT250SY was manufactured in 2006. It features an X-axis travel of 210 mm, Z-axis travel of 550 mm, and Y-axis travel of 110 mm. The machine is equipped with live tools for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the HYUNDAI KIA SKT250SY horizontal turning machine we have for sale. Contact us for further details.
