used CNC Cycle Turning Machines for sale

turning diameter: 820 mmturning length: 5000 mmturning diameter over slide: 460 mmcontrol: B2T max. torque on the spindle: 3400 Nmturning speeds: 5,6-1120 U/minFeed: 1-5000 mm/minRapid movement: 5000 mm/mintailstock quill taper MT: 6 3 jaw chuck Forckrath: 630 mmsteady: 525 mmsteady: 335 mmmain drive motor: 50 kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Circumferential diameter over bed 1000 mm Turning diameter via slide 700 mm Center height 510 mm Turning length 4000 mm Main spindle: Spindle head 55027 11 gr. Spindle diameter in front bearing 170 mm Spindle bore 128 mm Spindle drive 46/37 KW Torque 5037/4069 Nm Speed range 6.4 - 1600 rpm CNC SIEMENS 810 D 2 bezels Conveyor

Machine Details Stock number 1105-03777 Machine type lathe - cycle-controlled Make VDF BOEHRINGER Type DUS 630 TI Year of construction 2007 Control type NC Control HEINDENHAIN MANUEL PLUS 411 Storage location HAGUENAU Country of origin Germany Delivery time by arrangement Freight base from site Technical details Orbital diameter max. 640 mm Turning length max. 3,000 mm Control HEINDENHAIN MANUEL PLUS 411 Rotation diameter max. via face slide 435 mm Face slide travel 345 mm Center height 280 mm Bed width 360 mm Speed range - main spindle 3 - 2,500 min/-1 Drive power - main spindle 19 / 15 kW torque 2500 Nm Gear stages 2 Spindle nose DIN 55027 / 8 Spindle bearing diameter 100 mm bar diameter 95 mm usable rod diameter 80 mm Chuck diameter 415 mm Number of tool stations PARRAT 4 COMPARTMENT pos.4 Tool holder DIN 69880 / 32 X 25 Quill diameter 80 mm Quill str ...

Machine Details Stock-No. 1105-03863 Type of machine Lathe - cycle-controlled Make CAZENEUVE Type MAXICA HC 725 Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin France Delivery time immediately Freight basis EX WORK Technical details turning diameter 725 mm turning length 4000 mm control SOMAB PL + S5 + -SOMAB turning dia. Over Face-Slide 670 mm turning diameter over cross slideways 390 mm main drive motor 16 kW spindle turning speed range 2500 rpm Spindle Passage 82 mm Chucking diameter 315 mm taper in tailstock MT 5 total power requirement 30 kW Weight of the machine approx. 5 t Additional information Machine in WORKING CONDITION with NUM-SOMAB PL+S cycle control with MULTIFIX rapif tool holder size WITH STEADY

Machine Details Warehouse number 1105-03634 Machine type lathe - cycle controlled Make CAZENEUVE Type OPTICA 360 Year of construction 2000 Control type CNC Control CNC NUM Storage location FRANCE HAGUENAU Country of origin France Delivery time immediately Freight base EX WAREHOUSE Technical details Turning diameter 380 mm Turning length 750 mm Control CNC NUM Turning diameter above the face sled 200 mm Turning diameter via transverse guide 280 mm Main drive motor 11 kW Spindle speeds 2 - 3000 rpm Spindle passage 54 mm Chuck diameter 160 mm Tailstock cone MK 4 Total power requirement 14 kW Machine weight approx. 2 t Information TAECH IN CNC MACHINE CAZENEUVE OPTICA 360 FROM 2000 3 BAKING FEED TAILSTOCK

Stock Nr : 13163 Manufacturer : Colchester Machine : CNC 2000 YOUTUBE VIDEO OF THE MACHINE CNC Control Fanuc 0T Y.O.M. : 1990 Condition very good. Z & X ballscrews replaced two years ago. Machine is in operation daily. Turning length 1250.0 Diameter above the bed 420.0 Diameter above cross slide 240.0 Spindle taper MK5 Spindle bore 54.0 Number of turrets 1.0 Number of tools on turret 4.0 Turning speed 2750.0 Gearbox speeds: 3 Spindle motor power 7.5 KW Tailstock YES Included: Power chuck dia 220 mm 4-position automatic turret Auto turret 4 positions Separate manual turret Cooling system Original machine manual (French language)

turning diameter: 245 mmturning length: 1270 mmcontrol: Fanuc 210 iT spindle bore diameter: 54 mmnumber of controlled axis: 2 turning speed range: 6 - 2500 U/minrapid speed: 15 m/minnumber of tapers in turret head: 4 Parattail stock: Ja MK 5power requirement: 11 kWweight of the machine ca.: 3,5 tdimensions: 3,35 x 1,95 x 1,75 mUsed Teach In CNC- lathe in good condition- coolant system- Parat 4- statin toolholder system- some Parat tool holders- 3 jaw chuck, quick change The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cycle-controlled CNC lathe CONTUR DIALOG H630/2000 – HACO TUR630 MN - First ownership: from own use and first hand - Orbit diameter over bed: 630 mm - Center width: 2000 mm - Control: SIEMENS Sinumerik 810D with ManualTurn - Speed range: 5-2500 rpm - Rapid traverse X/Z axis: 10 m/min - Engine power S6: 18.5 kW - Monitor failed, add-on monitor in use - Operating instructions/documentation - Electric visit - Various multifix holders as accessories - Forkhardtfutter ø315

Machine details Bearing number 1105-02788 Machine type lathe - cycle controlled Make GILDEMEISTER Type NEF PLUS 500 Built in 1997 Control type CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base EXW Technical details Manual PLUS control Turning diameter 500 mm Turning diameter over slide 290 mm Turning length 1500 mm Plan path 250 mm Lining diameter max. 260 mm Spindle speed Gear stage 1 80 - 250 rpm. Spindle speed Gear stage 2 20 - 710 rpm. Spindle speed Gear stage 3 80 - 2800 rpm Spindle drive 11 kW Torque spindle at 100% ED max. 1050 Nm Spindle head according to DIN 55027 - size 8 Spindle bore 70 mm Hollow cone of the spindle nose Metric 80 Spindle diameter in front. Bearings 100 mm Feed force longitudinal / plan 10 / 5 kn Feed 5 m/min Rapid response - longitudinal/plan 8 / 6 m/ ...

turning diameter: 475 mmcentre distance: 2000 mmcontrol: Heidenhain ManualPlus 620 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mturning length: mmHeidenhain Manual Plus 620 controlC-axisdriven tools12-fold revolverchip conveyortail stockcoolant deviceTechnische Daten / technical details:Spitzenweite / center to center 2000 mmUmlauf-Ø über Bett / turning Ø over bed 475 mmUmlauf-Ø über Schlitten / turning Ø over sledge 260 mmDrehzahl / spindle speed 1-3000 UpMSpindelbohrung / spindle bore 82 mmReitstockaufnahme / tail stock taper MK5 Antriebsleistung Spindel/ drive capacity spindle 25 kWGewicht der Maschine / weight ca 4000 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for thi ...

turning diameter: max. 800 mmturning length: 2.700 mmcontrol: ManualPlus 4110 Heidenhaingreates pass round over bed: 800 mmSwing dia. over traverse guideway: 610 mmface slide travel: 395 mmcentre distance: 3.000 mmMain spindle:: turning speed range - main spindle: 1 - 1.800 min/-1power capacity - main spindel: 37 kWtransmission ratio: 2 spindle head: No. 11 DIN 55027spindle diameter in front bearing: 150 mmspindle bore: 106 mmchucking diameter: 315 / 500 mmCross-Slide:: face feed: 0,001 - 1.000 mm/-1speed longitudinal: 0,001 - 2.000 mm/-1thread pitch: 0,01 - 999,9 mmrapid travel - longitudinal/face: 10 / 5 m/minTailstock:: dia. of quill: 115 mmquill travel: 225 mmtaper of center: MK 6 Tool Mount:: type: PARAT No. 4 total power requirement: ca. 55 kWweight of the machine ca.: - tdimensions of the machine ca.: 7,0 x 3,0 x 2,6 mDocuments: Chip conveyor: Coolantsystem: through spindle ...

Swing: 630 mm over bed / 370 mm over crossslide Distance between centers: 2000 mm Spindle bore: 105 mm CNC Controller: Siemens Shopmill Toolpost: Rapid Original TRM Spindle speeds: 2 - 2500 Rpm Featured with: - 1x Fixed Steady - 1x 3-Jaw chuck Schunk Rota-S Plus - Variety of jaws - Variety of Toolholders - User manuals Motor power: 18,5 kW Machine LxWxH: 4000 x 2300 x 1800 mm Machine weight: 4500 kg

Swing diameter: 800 mm over bed / 500 mm over cross slide Distance between centres: 4000 mm Spindle speeds: 4 - 360 Rpm 200 - 1800 Rpm Spindle bore: 140 mm CNC Controller: Siemens Shopmill Toolpost: Parat, type RD4 Featured with: - Fixed steady - 4-jaw chuck - Chipconveyor - Parat Toolholders - User Manuals Motor power: 33 kW Machine LxWxH: 6400 x 2600 x 2000 mm Machine weight: 9300 kg

Peak width 1500 Circulation over bed 600 mm Circulation diameter over bed sled 400 mm Bed width 400 mm Bed height 400 mm Spindle speeds from 8 - 2000 rpm, infinitely variable Spindle passage 82 mm Tailstock MK5, Pinole stroke 225 mmPinole diameter 90 mm Longitudinal feeds from 0.01 - 20 mm Plan feeds 0.005-8 Weight approx. 2700 kg Dimensions: 2700 x 1650 x 2000 mm. Schunk rotary chuck 315 mm Coolant device

CNC cycle lathe, Control: Fagor 800T CNC Center distance. : 3000mm, diameter over carriage 470mm, spindle bore: 80mm Speed range: 0- 1600rpm, Accessories: 3-jaw chuck, 4-jaw chuck, face plate, tool changer Multifix with inserts, chip conveyor, 2 steady rests Machine can be viewed under power!

For sale: Geminis CNC 5 Plus 870/3000 CNC /cycles turning machine with a Fagor 800 T controller. The turning diameter above the bed is 870 mm, the turning diameter above the cross carriage is 560 mm. The tip distance is 3,000 mm. The machine comes with two bezels. The chuck diameter is 800 mm. A second chuck is mounted on the other side of the spindle box. The spindle passage is 150 mm. The machine is in good condition. Available from stock, subject to prior sale.

Cycle-controlled lathe GILDEMEISTER Type: NEF 320 built in 2000 Switch-on hours 36323. Control Haidenhain Manual Plus 4110. Center width 750mm. Circumferential bed 320mm. Circulating paddling sledge 150mm. Spindle bore 50,8mm. Spindle head Din 55027 size 6. Speed range 10 to 4000 rpm infinitely variable. Drive power 9.0 kW. Tailstock MK5. Tool carrier Multifix B. Chuck Rota - S 160mm. Complete documentation available. Power requirement: 400 volts 50Hz 14kVA. Space requirements: L 2450mm, W 1668mm, H 1825mm, weight 2000kg.

turning diameter: 460 mmturning length: 1500 mmcontrol: Fanuc turning diameter over bed slide: 270 mmgreates pass round over bed: 460 mmmax. swing-dia. in gap: Ø 730 x 213 mmspindle bore diameter: 76 mmturning speed range: 155- 2000 U/minrapid speed: 3 m/minnumber of tapers in turret head: 4 RD 2 PARATtail stock: Ja MKpower requirement: 11/7,5 kWweight of the machine ca.: 2,9 tdimensions: 3,2 x 1,65 x 1,72 mCycle-CNC-Lathe in good condition.Equipment:- Coolantsystem- PARAT toolholder head manual toolchanger- some Parat tool holders- 3- jaw chuck Röhm Ø 315 mm- Alpha link software- 3- point steady Ø 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 475 mmturning length: 1500 mmcontrol: Heidenhain Manual Plus V 360swing diameter over bed slide: 260 mmspindle bore diameter: 70 mmnumber of controlled axis: 2 turning speed range: 1- 3000 U/minrapid speed: 5/10 m/minnumber of tapers in turret head: 2 Multifix Btail stock: Ja MK 5power requirement: 22 kWweight of the machine ca.: 3,2 tdimensions: 4,5 x 1,5 x 2,0 mUsed Teach In CNC- lathe in good condition- coolant system- 2x Multifix station- 3 jaw chuck Ø 250 mm, quick change- steady- chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 650 mmturning dia. over face-slide: 400 mmcentre distance: 3000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mturning length: mmcontrol: Heidenhain ManualPlus control3-jaw power chuck 8-fold revolverchip conveyortail stockhydraulic steady restcoolant deviceTechnische Daten / technical details:Spitzenweite / center to center 3000 mmUmlauf-Ø über Bett / turning Ø over bed 650 mmUmlauf-Ø über Schlitten / turning Ø over sledge 400 mmDrehzahl / spindle speed 2000 UpM /rpmSpindelbohrung / spindle hole 103 mmReitstockaufnahme / tail stock taper MK5 Antriebsleistung / drive capacity 33 kWGewicht der Maschine / weight ca 5600 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.T ...

turning diameter: 420 mmturning length: 1000 mmcontrol: Siemens SINUMERIK 808D total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAX. SWING DIAMETER 444 MM MAX. TURNING DIAMETER 180 MM MAX. TURNING LENGTH 200 MM AXIS MOVEMENT X 110 MM / Z 240 MM CONTROL PANEL MAZAK SMART MAIN SPINDLE 5.000 MIN/-1 MAIN SPINDLE DIAMETER 6 INC NUMBER OF TOOLPOSITIONS 8 WEIGHT OF THE MACHINE 2.750 KG DIMENSIONS OF THE MACHINE 2.59 X 1.68 X 2.64 M EXTRA GANTRY LOADER

Cycle controlled lathe make METOSA type UD 260 CH x 1500Machine -No: 42194 built in 2001Center height: 260 mmTip width: 1500 mmCircumferential diameter: 475 mmCircumference diameter over bed: 530 mmCircumferential diameter over cross slide: 315 mmBed width: 350 mmSpindle bore: 80 mmSpindle mount: DIN 55027/8Discharge range: 0 - 2500 rpm.Feed range: 0 - 7000 rpm.Rapid traverse area: 10 m / min.Drive power: 15 kWWeight approx: 3.1 tOutside dimensions approx: 4120 x 1600 x 1800 mmWith- Three-jaw lathe chuck- Quick change tool holder with several inserts- CNC control FAGOR 8055/55 / TCLocation Staufenberg, little usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Mach ...

turning diameter: 550 mmturning length: 2000 mmcontrol: Fagor 8055TC total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFagor 8055 TC control3-jaw chuck 8-fold tool revolver (VDI40)chip conveyortail stockTechnische Daten / technical details:Drehlänge / turning length 2000 mmUmlaufdurchmesser in der Aussparung / rotary diameter in the gap 790 mmDrehdurchmesser über Bett / turning diameter over bed 550 mmDrehdurchmesser über Schlitten / turning diameter over sledge 310 mmSpindelbohrung / spindle hole 82 mmDrehzahlbereich / spindle speed 80-2400 UpM /rpmEilgang / rapid feed 15 m/minAntriebsleistung Spindel / drive capacity spindle 11/15 kWGewicht der Maschine ca. / weight ca. 4900 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and descr ...

CNC lathe make MONFORTS type DNC 5Year 1995 with C-axis and driven tool stationsCircumference diameter: 560 mmNumber of revolvers: 2Travel distance Z1 / Z 600/600 mmTravel X1 / X 260/260 mmMax. Spindle distance: 1460 mmSpindle passage: 85 mmSpindle flange: A8 / A8feed drivesRapid traverse Z1 / Z 15/15 m / minRapid traverse X1 / X 12/12 m / minFeed force Z1 / Z 11900/11900 NFeed force X1 / X 6600/6600 NNumber of revolvers: 2Number of tools per turret: 12Straight shank: 40 mmTurning tool shank: 25 x 25 mmSpeed range: 5 - 4000 rpm.Drive power: 18/24 kWWith:- CNC control SIEMENS 840 C- C axis- 2 tool turrets with driven tool stations- without driven tools- 2 opposite spindles- 1 set of tool holders- Chip conveyorSingle-layered run!usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors except ...

turning diameter: 500 mmturning length: 1000 mmcontrol: MONFORTS CONTROL control: SYSTEM MTC-K turning diameter over bed slide: 290 mmspindle bore: 70 mmspindle turning speed range: 3 - 2800 U/minspindle power: 15 kWmax. torque on the spindle: 1530 Nmspindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 Nrapid travel - longitudinal/face: 10 / 5 m/minbed width: 360 mmtravel of cross-slide: 265 mmupper slide travel: 140 mmturning tool - shaft cross cut: 32 x 25 mmtailstock quill diameter: 80 mmtailstock quill stroke: 160 mmtailstock taper MT: 5 total power requirement: kWweight of the machine ca.: 3,1 tdimensions of machine L x W x H: 2,88 x 1,68 x 2,18 mAccessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cycle lathe Monforts KNC 5 1500 Year of construction: 2005 Control: MTC K Distance between centers: 1580 mm Swing diameter over bed: 555 mm Swing diameter over face slide: 290 mm Carriage travel: 235 mm Spindle bore: 70 mm Spindle speeds: 2 - 2800 Total power requirement: 16 KVA Machine weight approx.: 3.3 t Dimensions approx.: 2,9x1,6x1,8 m - Rota-S plus Ø 250 3-jaw chuck - Coolant device- - Chip protection The Monforts KNC 5 1500 cycle lathe is in good condition and can be viewed under power.

turning diameter: 500 mmturning length: 1500 mmcontrol: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mmspindle bore: 70 mmspindle turning speed range: 3 - 2800 U/minspindle power: 15 kWmax. torque on the spindle: 1530 Nmspindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 Nrapid travel - longitudinal/face: 10 / 5 m/minbed width: 360 mmtravel of cross-slide: 265 mmupper slide travel: 140 mmturning tool - shaft cross cut: 32 x 25 mmtailstock quill diameter: 80 mmtailstock quill stroke: 160 mmtailstock taper MT: 5 total power requirement: kWweight of the machine ca.: 3,3 tdimensions of machine L x W x H: 3,45 x 1,65 x 1,93 mAccessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 290 mmturning length: 3000 mmswing dia.: 650 mmswing diameter over face slide: 350 mmspindle bore diameter: 71 mmnumber of controlled axis: 2 control: Monforts EuroTurn turning speed range: 2- 1800 U/minrapid speed: 10/5 m/mintail stock: MK 6 number of tapers in turret head: Multifix C bed width: 550 mmpower requirement: 21/15 kWmax. torque on the spindle: 3320 Nmdimensions: mweight of the machine ca.: 6,5 tUsed Teach in lathe in good condition Zubehör: - 3 jaw chuck - Multifix C with Capto quick change tool - coolant system - steady - chip conveyor - 4 mech. gear steps (2- 225/ 4- 450/ 8- 900/ 16- 1800 rpm) - electric break main motorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 555 mmturning length: 1500 mmturning diameter over slide: 290 mm3-jaw-chuck diameter: 315 mmmake: Röhn control: Monforts MTCKquick change tool holder: Multifix C steady: turning speeds: 2-2800 U/mintransmission ratio: 3 face slide travel: 235 mmspindle passage: 70 mmtailstock quill taper MT: 5 total power requirement: kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,9x1,6x1,8 mAbout usmore than 400 machines in the warehouse over 12000 m² storage area,crane capacity 70 tmore than 1000 items accessories for your workshopYou wantto sell machines production lines or your company, then talk to us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 555 mmturning length: 1500 mmturning diameter over slide: 290 mm3-jaw-chuck diameter: 250 mmmake: Röhn control: Monforts MTCKquick change tool holder: Multifix C steady: turning speeds: 2-2800 U/mintransmission ratio: 3 face slide travel: 235 mmspindle passage: 70 mmtailstock quill taper MT: 5 total power requirement: kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,9x1,6x1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 640 mmturning length: 1500 mmcontrol: SIEMENS SINUMERIK 820 D turning diameter over slide: 420 mmspindle bore: 65 mmcentre height: 320 mmcentre distance: 1500 mmbed width: 440 mmspindle drive: 17 kWmax. torque on the spindle: max. 162 Nmrapid travel - longitudinal/face: 10 / 5 m/minfeed power: 10000 / 9500 Ntailstock quill diameter: 100 mmtailstock quill stroke: 240 mmtailstock taper MT: 5 total power requirement: 25 kWweight of the machine ca.: 5,5 tAccessories: 3-jaw chuck 310 mmø, various tool holders for turret, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code 71139 DESCRIPTION CNC Center lathe with 2 axis Make P B R Model T 30 SNC x 1500 S/N 30 H / 87 Year 1996 Control Siemens Sinumerik 805 Distance between centers 1500 mm Max. swing 630 mm Max. swing over slide 330 mm Spindle bore 105 mm Spindle speed in 2 ranges stepless ( in program ) 7 – 310 / 44 - 2000 rpm Motor power 15 kW Connected load 33 KVA Machine weight 5500 kg Accessories 8 ATC Duplomatic toolholder R 10 Hydraulic 3 chuck Ø 315 mm 1 fixed steady with 320 mm bore 1 open steady cooling equipment Condition Machine is in good condition

Code 81176 DESCRIPTION CNC Center lathe with 2 axis Make P B R Model T 30 SNC x 3000 S/N 30 – S / 80 Year 1995 Control Heidenhain Manual Plus ( 1998 ) Distance between centers 3000 mm Max. swing 630 mm Max. swing over slide 330 mm Spindle bore 105 mm Spindle speed in 2 ranges stepless ( in program ) 7 – 310 / 44 - 2000 rpm Motor power 15 kW Connected load 33 KVA Machine weight 6000 kg Accessories 3 chuck of 315 mm 1 fixed steady 1 open steady cooling equipment Condition Machine is in good condition

turning diameter: 940 mmturning length: 8000 mmcontrol: Heidenhain MANUALplus 620 turning diameter over bed: 940 mmturning diameter over slide rest: 570 mmturning length: 8000 mmworkpiece weight max.: 120000 kgturning speeds: 500 1/minspindle bore: 254 mmtotal power requirement: 22 kWweight of the machine ca.: - tdimensions of the machine ca.: 11,4 x 2,75 x 2,4 m- Control Heidenhain MANUALplus 620- 8-fold Tool Revolver- 3 Steadies- external Grinding Unit (changeable with Tool-Revolver)- Head StockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1250 mmturning diameter over slide rest: 1000 mmturning length: 11000 mmtotal power requirement: kWweight of the machine ca.: 49 tdimensions of the machine ca.: mCenter height 720 mmCenter distance 11000 mmTurning diameter over bed 1250 mmTurning diameter over slide 1000 mmWorkpiece weight max 12 toSpeed 3-315 rpm - steplessMotor power 55 kW (DC)Equipment1 position indicator HEIDENHAIN | Type ND 780 for 1 axis1 four-jaw faceplate Ø 1000 mm1 fixed steady rest1 ring steady rest with four-jaw faceplate Ø 920 mm1 Autom. 4-pos. tool holder1 Chip conveyor1 Machine lamp1 Coolant device Operating key | operating manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe by learning ROMI type M 510 TECHNICAL SPECIFICATIONS: Year: 2007 Type of CN: FANUC 21i-T Tip distance: 1500 [mm] Peak height: 255 [mm] Number of axes: 2 X-axis stroke: 280 [mm] Z-axis stroke: 1500 [mm] X-axis fast forward speed: 7500 [mm/min] Z-axis fast forward speed: 10000 [mm/min] Spindle nose: A2-6" Spindle passage diameter: 65 [mm] Mini speed. Pin: 3 [rpm] Maximum speed. Pin: 3000 [rpm] Pin power: 11 [kW] Diameter allowed above the bench: 520 [mm] Permissible diameter above trolley: 260 [mm] Cone: MT 4 Stroke sheath against doll: 130 [mm] Diameter against doll sheath: 80 [mm] Installed capacity: 20 [kVA] Supply voltage: 400 [V] Number of hours powered on: 4063 [h] Operating hours: 610 [h] Machine dimensions: 3650 x 1650 [mm] RS232 port: Yes Weight: 3500 [kg] EQUIPMENT INCLUDED: x1 chip conveyor x1 chuck 3 concentric bits Ø250 [mm] RO ...

CNC Lathe Saeilo Contur Dialog E-46 Manufacturer Ecoca EL-4610E Year of construction 2007 comes from research institute Control Siemens 810D Circumferential diameter over bed 460mm Orbit diameter overcarriage 250mm Drive power 40% ED 10KW Speed range 40-3000rpm Center width 830mm Tailstock quill MK 4 Spindle bearing renewed in 2021 The offer is aimed exclusively at traders within the meaning of §14 BGB no sale to private individuals!

turning diameter: 270 mmturning length: 410 mmcontrol: FANUC 20TA centre distance: 650 mmspindle turning speed range: 30-5000 U/minweight of the machine ca.: 1.7 tMisc. accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 330 mmturning length: 650 mmcontrol: FANUC 20T centre distance: 950 mmspindle turning speed range: 30-4000 U/minweight of the machine ca.: 2 tTurret 8 positionswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe fabr. SCHERER-FEINBAU type SNC 80Machine -No: 8079 Year 1995Distance between centers: 350 mmCircumference diameter over bed: 320 mmCircumference diameter over support: 160 mmPath Z + X: 250 mmSpindle mount: DIN 55021 / A 3Speed range up to: 6000 rpm.Feed infinitely variable: 0.1 - 10000 mm / min.Rapid traverse: 10 m / min.Quill stroke: 125 mmDrive power: 7.0 kWWeight approx: 2.0 tOutside dimensions approx: 2100 x 1500 x 1900 mmWith- Siemens control 810 T- power chuck- Linear turret with 4 tool holders- Cooling deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

No. 5271: 1 Gebr. Cycles Lathe Fabr. VERTICAL Type SLZ 1000 x 3000 Bauj. 1999 SIEMENS 810-D control Arb.-Ber.: Ø 1000/650 x 2600 (3000) mm Drive power: 46 kW 3-jaw power chuck FORKARDT Ø 630 mm SAUTER 4-fold turret 2 chip conveyors Documentation Speed range 1-900 min-1 Spindle head size 15 DIN 55027 Spindle bore 130 mm Space requirement approx. 11 x 5 x 3 m Transport dimensions approx. - Machine + control cabinet approx. 11 LM width 2.80 / height 2.70 - Cabin parts, chip conveyors + accessories approx. 13 LM Weight approx. 20 to The machine is functional with age- and use-related wear.

turning diameter: 380 mmturning length: 750 mmcontrol: Sinumerik ManualTurn Siemensgreates pass round over bed: 380 mmSwing dia. over traverse guideway: 230 mmbed width: 240 mmMain spindle:: turning speed range - main spindle: 1 - 4.000 min/-1power capacity - main spindel: 11 / 9 kWspindle head: DIN 55027 / 6 spindle diameter in front bearing: 95 mmspindle bore: 45 mmTool Mount:: System: Parat number of toolpositions: 4 pos.turning tool - shaft cross cut: 20 x 25 mmmovement areas:: x-axis: 200 mmz-axis: 750 mmTailstock:: diameter of quill: 50 mmquill stroke: 130 mmtaper of center: MK 3 feeds:: rapid traverse: X: 10 / Z: 7 m/minfeed power: X: 7 / Z: 10 kNtotal power requirement: - kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 3,0 x 2,2 x 2,1 mDocuments: Tailstock: steady rest: 2x Lathe cycle controledSEIGER - SLZ 360- Steel holder system PARAT- various turning to ...

centre distance: 1.000 mmswing over bed: 490 mmswing diameter over face slide: 280 mmspindle bore: 93 mmdiameter of quill: 70 mmquill stroke: 160 mmtaper bore: MK 5 Dimensions (L x W x H): 2.800 x 1.850 x 1.900 mmweight of the machine: 3.600 kgCNC cycle-controlled lathe | SEIGER - SLZ 500EThe machine is in a good condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: SLZ500E | SLZ-500EThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathes make SPINNER type TC 108 MCMachine -No: 040199/98215 built in 1998Technical specifications:Distance between centers: 1000 mmSwing diameter over bed: 520 mmMax. turning diameter: 358 mmAdjustment path X-axis: 296 mmAdjustment path Z-axis: 1090 mmMax. rapid traverse X-axis: 18 m/min.Max. Z-axis rapid traverse: 24 m/min.Bar Capacity: 107mmSpindle speed: 2500 rpm.Quill diameter: 110 mmQuill stroke: 100 mmNumber of driven stations:12Connected load: 50 kVAWeight approx.: 6500 kgDimensions approx.: 3590 x 1750 x 1890 mmwith- Control Siemens 810Dused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC lathes make SPINNER type TC 65 CMachine -No: 050023 built in 1996Technical specifications:Distance between centers :600 mmSwing diameter over bed: 400mmMax. turning diameter: 310 mmAdjustment path X-axis: 200 mmAdjustment path Z-axis: 500 mmAdjustment path Q-axis: 500 mmC-axis adjustment range:360°max. rapid traverse: 20 m/min.Feed: 0 - 15 m/min.Main spindle passage: 65 mmMax. spindle speed: 4000 rpm.Counter spindle passage: 26 mmMax. spindle speed: 6000 rpm.Quill diameter: 80 mmQuill stroke: 100 mmNumber of turret stations: 16-foldMain spindle motor: 14 kWTotal connection value: 20 kWWeight approx.: 4500 kgDimensions approx.: 1700 x 2200 x 1700 mmwith- Control Siemens 820 T- 16-fold revolver- counter spindle- C axis- 8 powered tools- Parts catcherused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment ...

Turning machine make TOS type Galanta Zyklotronic HAD 40/75Machine -No: 400507596001 Year 1996Turning length: 750 mmTop height: 230 mmCircumference diameter over bed: 400 mmCircumferential diameter over cross slide: 230 mmCircumference diameter in the offset: 460 mmSpindle mount: DIN 52027 / B 6 CamlockSpindle bore: 50.8 mmSpeed range: 20 - 3500 rpm.Feed: 0.001 - 9999 mm / min.Rapid traverse: 6.0 / 3.0 m / min.Drive power / connected load: 7.5 kW / 13 kVAWeight approx: 1760 kgOutside dimensions approx: 2100 x 1200 x 1725 mmWith- CNC control FAGOR 800 T CNC- 3-jaw chuck- revolving center point- Multifix steel holder with multiple insertsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available fo ...

greates pass round over bed: 560 mmturning length: 1500 mmcontrol: Siemens Sinumerik 828 D swing diameter over slide rest: 390 mmspindle speed:: 2400 Upmbed width: 345 mmspindle bore: 80 mmdiameter of quill: 75 mmquill stroke: 200 mmtailstock quill taper MT: 5 3-jaw chuck: Schunk Rota S 315 3-jaw-chuck diameter: 315 mmmain drive: 14 kWweight of the machine ca.: 2900 kgdimensions of the machine ca.: mremoveable bed bridgeuser interface control: Shopturnhydraulical tailstock quill adjustmentkey bar chuck Schunk Rota S+ 2.0 315-92quick change tool holder Choromant CaptoThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Lathe Fabr. VDF BÖHRINGER Type 180 CmYear of construction 1996Turning length: 500 mmMax. Circulation diameter: 330 mmMax. Turning diameter: 250 mmSpindle bore: 78 mmSpeed range: 50 - 4500 rpm.Spindle mount: DIN 55026/6Max. Torque: 800 NmFeed rate: - 10000 mm / minRapid traverse speed: 15 m / minDrilling force: 10 kNDrive power: 53 kWWith- CNC control SINUMERIK 840 C- Drum revolver with 12 tool holders- 6 positions with driven tool positions- 4 powered tools- many tool holders 40 mm- Bar feeder SIEMCA MO 4.6 / 4musedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC lathe make VDF BOEHRINGER type VDF 315 C-UFabr. -No: 1117.7007-26 built in 1989Technical specifications:max. swing diameter: 550/520 mmmax.working lengthways: 450 mmMax.processing lengthways on the drum turret: 280 mmTurning length: 2000 mmSupport path Z: 2227 mmSupport path X: 435 mmSpindle bore: 78/103 mmSpindle mount: DIN 55022/8Infinitely variable speed range: 16 - 2500 rpm.max.torque of the main spindle: 1600/2240 NmFeed speed: 0.1 - 10000 mm / min.Rapid feed: 10 m / min.Feed force: 15 kNNumber of tool stations: 12Switching time: 1 / 1.8 sec.Hydraulic pressure: 60 barDrive power: 43 kWDimensions without chip conveyor approx: 6000 x 2400 x 2400 mmWeight approx: 14.2 twith- three-jaw chuck 400 mm dia.- Drum turret 12 stations of which 6 with driven tools speed 60 - 2500 rpm.- CNC control Siemens Sinumerik 880 T- many tool holders- chip conveyor- Forkhardt power chucksusedPrice  ...