Manufacturer:
(Category: 102)
- Balancing machine for wheel sets- Work load up to 5000 Kg- Kell B11 Vision CEMB controller
: gebraucht : 2020 : 1658 : prompt, Zwischenverkauf v : Bulgarien : 26500 €: 1 : 22600 €: 400 mm: 1000 mm: 200 mm: 52 mm: 235 mm: 320 mm: 6 : 6 MK: 12 : 50-2.240 1/min: 80 : 0.015 - 0.6 mm/U: 0.0075 - 0.3 mm/U: 40 : 0.25 - 7.5 mm: 120 - 4 Gänge/: 0.0625 - 1.875 : 235 mm: 110 mm: 50 mm: 4 MK: 100 mm: 4 kW: 2750 mm: 1100 mm: 1600 mm: 1540 kgThis machine is used in our workshop for repair work,therefore it has only been used very little so far.(New price € 36,070.00)driven by manual transmission3-axes digital readout Fagor 40iquick change toolpostMultifix Type Bwith4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 200 mmspindle noseNr. 6 DIN 55027four way rapid traverse devicespindle dead centercoolant equipment1 pce. flange plate for lathe chuckØ 200 mm1 adapter sleevefull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guard ...
turning diameter: 700 mmturning length: 1250 mmcontrol: Siemens 840 G Ergoline spindle passage: 104 mmspindle speed:: 4000 spindle motor: 35/45 kWmax. torque on the spindle: 600/700 NmSpindlespeed subspindle: 4000 U/minmilling head -swivable +/-: +/- 120 °milling drive: kWturning speed range - milling: 12000 U/mintool taper: Capto C6 tool magazin:: 36 rapid traverse: m/miny-axis: +/- 200 mm mmdimensions: mweight of the machine ca.: 18,5 tUsed CNC- Lathe with sub- spindle and milling head- milling head full axis + 1° clamping- chipconveyor- aircondition for elextric box- new milling spindle in 2025- absolute scale X/Y/Z1 axis- Shop Mill dialig programming- 8/20 bar coolant programmable- band filter system- Bar package (Partscatcher, prepared for ba magazin)Machine sold without jaws.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 100 mmturning length: 75 mmcontrol: FANUC Oi-TF total power requirement: 15 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 10-axis DMG MORI Sprint 42/10 linear was manufactured in 2021. It features a maximum spindle speed of 6500 1/min and includes a high-pressure cooling system of 20 bar. The machine is equipped with a bar feeder of 3200 mm length and offers advanced capabilities for precision turning. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 42/10 linear machine we have for sale. Contact us for further details.
This 4-axis HAAS ST-25Y was manufactured in 2019. It features a maximum spindle speed of 3,400 rpm and a chuck size of 254 mm. The machine can work with driven tools and has a maximum cutter diameter of 298 mm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-25Y horizontal turning machine we have for sale. Contact us for further details.
CONTROLS CNC controls FANUC 32I-MODEL B - MANUAL GUIDE I BASIC FUNCTIONS number of spindles: 1 number of turrets: 1 live positions: yes WORKING RANGE TURNING turning diameter (max): 530 mm bar diameter (max): 117 mm worpiece length max.: 500 mmMAIN SPINDLE spindle revolutions (max): 2000 /min drive power: 37 kW spindle torque: 3073 NmX/Z SLIDE number of tool positions (total): 12 number of live positions: 12 - rotation speeds (max): 4000 /min - drive power: 7.5 kWATTACHMENTS (TURNING) chip conveyor: yes • Programmable tailstock MK#5• Main spindle with 2-stage gearbox• Tooleye• Chip conveyor• High-pressure pump, 20 bar• 3-jaw chuck, diameter 380 mm• Tool breakage monitoring• Programme memory expansion• Programmable clamping pressure
Horizontal turning machine manufactured in 2011. This DOOSAN Puma 2600L features a maximum turning diameter of 481 mm and a turning length of 1,280 to 1,310 mm, depending on the chuck. It includes a robust spindle speed of up to 2,800 RPM and a tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600L machine we have for sale. Contact us for further details.
WEILER Praktikant 140 B lathe YOM 1991, Serial No. 91-2735 With 3-axis digital readout Heidenhain Centre height 140 mm Swing over bed 280 mm Swing over support 158 mm Centre distance 650 mm Spindle hole 40 mm Spindle speeds 24 to 2500 rpm Tailstock Pinole Ø 40 mm Taper MK 3 Stroke Pinole 85 mm Feeds from 0.02 to 0.63 mm/rev Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible Metric thread pitches from 0.25 to 8 mm Weight approx. 680 kg Accessories: -set of collets -knife holders -x2 jaw-chucks -others The machine has only been used in Germany. Very quiet drives, excellent condition
RAFAMET KCH 360/450 vertical turret lathe was built in 1987 in Poland by Fabryka Obrabiarek RAFAMET. The machine is used for precise machining of large and heavy workpieces whose size does not allow effective machining with standard machines. RAFAMET KCH 360/450 is distinguished by its stable design, equipped with two vertical supports and one side support. Machining is performed on a work table with a diameter of 3600 mm by means of a reliable vertical spindle. The work table offers 20-position speed adjustment in the range of 0.6 to 50 rpm, enabling precise adjustment of the parameters to the production requirements. The position of the head in all linear axes is continuously monitored by state-of-the-art SONY digital readout, which ensures high precision measurement. All this makes the offered KCH 360/450 vertical turret lathe an excellent choice for, among others, the energy, ship ...
turning diameter over bed: 1600 mmturning diameter over slide rest: 1280 mmturning length: 5000 mmcentre height: 800 mmspindle turning speed range: 1 - 200 U/minspindle bore: 105 mmspindle diameter in front bearing: 120 mmmain drive motor: 75 kWmax. workpiece weight between centres: 30000 kgworkpiece weight in steadies max.: 40000 kgbed slide rapid adjustment: 4000 mm/min.total power requirement: ca. 100 kWweight of the machine ca.: 52 tRefurbished in 2020 and equipped with:- 4-jaw faceplate Ø 1600- thread cutting- 4-fold heavy duty tool holder- Hardened tracks- tailstockdiffenret Steadies, chip conveyor and other accessories, available upon requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 256 mmturning length: 530 mmcontrol: Fanuc 31i-A turning diameter over bed: 550 mmturning diameter over cross slideways: 350 mmmain spindle:: max. turning speeds: 6000 min/-1Drive power - main spindle: 11 kWmax. torque: Nmmax. rod diameter: 45 mmspindle head: A2-5 chucking diameter: mmtool turret:: shaft height for square tool: 25 mmDrill shank diameter: 50 mmtravel:: x-axis: 210 mmz-axis: 560 mmfeeds:: rapid traverse: x 20 / z 24 m/mintotal power requirement: kWweight of the machine ca.: 7,7 tdimensions of the machine ca.: L 4,18 x B 2,01 x H 1,98 mTechnical Specifications:- Manufactured in 2017 but not put into operation until 2021- Fanuc 31i mod A CNC control- Y-axis- 20 bar tool cooling- Fedek bar loader- Chip conveyor- 12-station tool turret- 10 rotating toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 1500 mmgreates pass round over bed: 490 mmturning dia. over face-slide: 280 mmcontrol: Heidenhain Manual Plus Speed range - up to: 3000 U/minspindle bore: 65 mmpower capacity - workpiece power: 12/16 (100/60%) kWweight of the machine ca.: 3,5 tEquipment/Accessories:- Steady rest- Chuck- Tool holders- Drill bits- Tips- Multifix holderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Power supply: 75A, connected load: 35kW, control system: Traub SYSTEM TX 8F, weight: approx. 4.5t, operating hours: 84,126h, the machine has problems when machining inclined surfaces. An on-site inspection is possible.
Center distance: 2000mm, center height: 280mm, swing over bed: 560mm, swing over gap: 785mm, swing over carriage: 350mm, bed width: 350mm, spindle bore: 105mm, spindle speed range: 25-200/ 200-1500rpm, longitudinal feed range: 0.059-1.646mm/rev, cross feed range: 0.020-0.573mm/rev, metric threads: 0.2-14mm, quill diameter: 75mm, quill travel: 180mm, quill taper: MT 5, motor power: 7.5kW, length: 3340mm, width: 1150mm, height: 1460mm, weight: 2.72t. Equipment: 3-axis digital readout ES-12 V with LCD display, 3-jaw chuck PS3-315mm / D8, max. steady rest passage diameter: 180mm, max. follow rest passage diameter: 120mm, foot pedal with brake function according to CE, protective device for quick-change tool post, LED machine light, initial filling with Shell Tellus 46, two center points, frequency inverter, digital speed display, slip clutch, rapid traverse longitudinal and cross, coolant sy ...
Offered is a cam-controlled automatic lathe. Bar capacity: 29mm, speed range: max. 3750rpm, main drive: incrementally adjustable via change gears, number of tool slides: 4, control: cam control. Equipped with bar loading magazine, coolant device, tool turret, various tool holders, change gear set. Note: Sale is without extraction system. Weight: approx. 2200kg incl. magazine, overall dimensions X/Y/Z: approx. 5500mm/1300mm/1750mm. Inspection possible by arrangement.
A CNC production turning machine is offered. Working area bar capacity: 65mm, max. turning length: approx. 150mm, tool turret: 14 stations, control: C200. Equipped with automatic bar feeder magazine (type MBF), chip conveyor with integrated coolant cleaning system, compressed air connection, hydraulic chuck, signal light. Weight: approx. 5500kg, overall dimensions X/Y/Z: approx. 8500mm/2100mm/2200mm (incl. loading magazine). Inspection possible by arrangement.
A cam-controlled automatic lathe is offered. Working area bar capacity: 60mm, turret: 6 stations (axial), cross slides: 4 (radial), control: mechanical cam control. Equipped with bar guiding device, foldable safety cover, integrated coolant system, chip tray, various tool holders. Weight: approx. 2350kg, overall dimensions X/Y/Z: approx. 2100mm/1250mm/1750mm (dimensions without bar guide). Inspection possible by arrangement.
turning diameter over bed: 500 mmturning diameter over slide rest: 330 mmturning diameter in the gap: 600 mmturning length: 3000 mmbed width: 505 mmspindle bore: 72 mmspindle head: DIN 55022 Gr. 8taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/minpower requirement: 18,5 kWdimensions: 5,3 x 1,75 x 1,53 mweight of the machine ca.: 5,2 tused lathe in nice condition with digital scale- 2 axis digital scale- 4 jaw chuck Ø 250 mm- 3 jaw chuck Ø 260 mm- Multifix C toolholder system- some toolholders- steadyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 390 mmturning diameter over slide rest: 190 mmturning length: 1000 mmturning dia. in gap: 460 mmspindle head: DIN 55026 Gr. 6spindle bore: 52 mmturning speed range: 11,2 - 2240 U/minpower requirement: 7,5 kWbed width: 355 mmdimensions: 2,8 x 1,3 x 1,6 mweight of the machine ca.: 1,9 tEquipment: - Multifix B with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jawsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 400 mmcentre distance: 3.000 mmmax. swing over bed: 810 mmmax. swing over facing slide: 510 mmmax. swing-dia. in gap: 850 mmcontrol: WEILER max. workpiece weight: 3.800 kgspindle diameter in front bearing: 150 mmspindle bore: 106 mmfaceplate diameter: 630 mmworktool system: Parat tailstock quill taper MT: 6 dia. of quill: 115 mmspindle turning speed - stepless: 1 - 1.800 U/minLathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor.A comprehensive tool package is included in the scope of delivery.The machine video from the production plant will be shared on request.The machine is in good condition and can be inspected under power at any time.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - ...
Leadwell LTC-50CL CNC Lathe (10/2006) Manufacturer: Leadwell Type: LTC-50CL CNC Lathe Year of manufacture: 10/2006 Control: Fanuc, Incl. chip conveyor, tailstock, tool turret Auction-ID: A7-47048-5
Mori Seiki NL 2500 Y/700 High Performance Lathe Turning diameter 275 mm Turning length 705 mm Control MAPPS II MSX 850 Circumferential diameter over bed 923.8 mm Circumferential diameter over face slide 755 mm max. turning diameter 356 mm max. rod diameter 80 mm Main spindle Speed range - main spindle 4,000 rpm Drive power - main spindle 26 / 22 kW Spindle nose JIS A2-8 Spindle bore 91 mm Spindle bearing diameter 140 mm C-axis 0.001 ° Travel x-axis 260 mm z-axis 795 mm y-axis 100 (+/- 50) mm Revolver Tool Positions 12 Pos. Shank height for square tool 25 mm Shaft diameter for drill rod max. 50 mm Turret switching time 0.25 sec. Speed range of the indicated Tools 6,000 min -1 Drive power - applied Tools 5.5 / 3.7 kW Feed Rapid traverse X-axis 30 m/min Rapid traverse Z-axis 30 m/min Rapid traverse Y-axis 10 m/min Tailstock Tailstock Shift 564 mm Quill diameter 80 mm Pick-up ...
Mori Seiki CV 500 Machining Center X-axis: 510 mm Y-axis: 510 mm Z-axis: 510 mm Pallet length: 750 mm Pallet width: 550 mm Spindle Type: BT-40 Max. workpiece weight: 200 kg Spindle motor power: 7.5 kW Number of tools: 24 Spindle speed: 8000 rpm Dimensions: L 2000 x W 3600 x H 2750 mm Machine weight: 4400 kg Auction-ID: A7-47048-28
turning diameter: - mmturning length: - mmswing diameter over bed slide: - mmcentre distance: 2200 mmdigital: ja total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 650 mmturning length: 2042 mmcontrol: Fanuc 32i-A total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Fanuc 32i-A10-fold revolver3-jaw chuck diameter 500mm (hole 128mm)chip conveyortail stockcoolant deviceTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 900 mmUmlaufdurchmesser über Planschlitten / rotary diameter over sledge 720 mmmax. Drehdurchmesser / max. turning diameter 650 mmmax. Drehlänge / max. turning lenght 2042 mmX-Weg / X-travel 362 (57+305) mmZ-Weg / Z-travel 2155 mmDrehzahl / spindle speed 1500 UpM /rpmWerkzeugrevolver / turret head 10 fach /holesStangendurchlass / bar diameter 159 mmEilgang X / rapid feed X 16 m/minEilgang Z / rapid feed Z 18 m/min.Antriebsleistung Spindel / drive capacity spindl ...
This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It features a Y-axis travel of 120 mm, a main spindle diameter of D65, and a counter spindle diameter of D60. The machine is equipped with a turret that has 12 stations and driven tools on turret 1 and 2. If you are looking to get high-quality turning and milling capabilities, consider the Index G 200 RATIO LINE turn-mill centre we have for sale. Contact us for further details.
This 3-axis DMG NEF 600 was manufactured in 2012. It features a turning length of 1200 mm and a powerful integrated spindle motor with a maximum spindle speed of 3500 rpm. The machine includes a 12-station disc turret and live tooling capabilities for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG NEF 600 horizontal turning machine we have for sale. Contact us for further details.
This 6-axis DMG Mori Seiki NZ2000T3Y2 was manufactured in 2008. It features a maximum machining diameter of 200 mm and a maximum machining length of 260 mm. The bar machining capacity is 65 mm, with an X-axis travel of 210 mm, Z-axis travel of 810 mm, and Y-axis travel of 110 mm. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki NZ2000T3Y2 machine we have for sale. Contact us for further details.
This 3-axis DOOSAN Puma GT 2100M was manufactured in 2017. It features a maximum turning diameter of 300 mm and a turning length of 513 mm. The machine is equipped with 12 tool stations and offers rapid traverse speeds of 24 m/min in the X-axis and 30 m/min in the Z-axis. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 2100M horizontal turning machine we have for sale. Contact us for further details.
2.500 € 
