Manufacturer:
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.

Manufacturer:
(Category: 102-157)

lathes / Multi-spindle turn automatics
date: 19.02.2024 add to watchlist
approved
dealer
item-No.: 144479354
New in: 1970

used

check Seller: turn-tec Produktion & Service GmbH
Location: 58540 Meinerzhagen Land-de

add to watchlist

Gildemeister Multispindle Slot machine 6- Spindler Type: AS 25-6 Pick-up device back-valued processing pneumatic stop Balluff cam switch IEMCA PRA Bar loader Oil mist separator (electrostat.) Conveyor Machine has been retrofitted in the past

lathes / Multi-spindle turn automatics
date: 19.02.2024 add to watchlist
approved
dealer
item-No.: 144479330
New in: 1980

used

check Seller: turn-tec Produktion & Service GmbH
Location: 58540 Meinerzhagen Land-de

add to watchlist

Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Cmvlgfoyc - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide

lathes / Multi-spindle turn automatics
date: 19.02.2024 add to watchlist
approved
dealer
item-No.: 144479343
New in: 1980

used

check Seller: turn-tec Produktion & Service GmbH
Location: 58540 Meinerzhagen Land-de

add to watchlist

Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Sowiabeb - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide

lathes / Multi-spindle turn automatics
date: 19.02.2024 add to watchlist
approved
dealer
item-No.: 144479341
New in: 1970

used

check Seller: turn-tec Produktion & Service GmbH
Location: Land-de

add to watchlist

Gildemeister 6 Spindle Lathe AS 32-6 - Spindle stop set-up - Pneum pick-up device. - Zubehoer at an extra cost - Cross hole drilling - Thread cutting gears - Thread cutting device - wahlw. Fraeseinrichtung Querschl. - Spaenefoerderer

lathes / Multi-spindle turn automatics
date: 17.06.2024 add to watchlist
approved
dealer
item-No.: 161026756
New in: 2018

used

check Seller: ifa technologies s.r.l.
Location: Land-it

add to watchlist

4x compound slide - Pos.1; Pos.2; Pos.4; Pos.5 4x indipenden feed - Pos.1; Pos.2; Pos.4; Pos.5 threading device 1x threading spindle pick-up spindle broaching device set of cams set of collets bar-loader Cucchi Giovanni (YOM 2004)

lathes / Multi-spindle turn automatics
date: 27.04.2024 add to watchlist
approved
dealer
item-No.: 162216624
New in: 2007

used

check Seller: Evelin of America Corporation
Location: Land-us

add to watchlist

KITAKO HS4200N Multispindle CNC Lathe YEAR 2007 NO. OF SPINDLES 4 (2 TURNING / 2 LOAD & UNLOAD) SPINDLE TYPE A2-6 SPINDLE SPEED 4,500 RPM SPINDLE MOTOR (HP) 20HP X - AXIS TRAVEL (INCHES) 6.3" Z-AXIS TRAVEL (INCHES) 9.9" MAX TURNING DIAMETER 7.8" MAX TURNING LENGTH 4" FEED RATES (X/Y/Z AXIS) 6693 IPM / 4724 IPM / 2165 IPM CHUCK SIZE (INCHES) 8" (NOT INCLUDED) 2 NOS 8 STATION TURRETS WITH COOLANT THRU TOOLS CARRIER INDEX 1.5SEC/180DEGREE, 1SEC/90DEGREES DIA CURVEIC COUPLING 28.35"WITH 10,780LBS CLAMPING FORCE MACHINE EQUIPPED WITH BOX SLIDEWAYS FOR X & Z AXIS CHIP AIR BLOW DEVICES FOR LOADING CHUCKS - 2 NOS CHIP CONVEYOR HIGH PRESSURE COOLANT (100PSI) MULTIPLE REPETITIVE CYCLES G70 - G76 TOOL LIFE MANAGEMENT TOOL GEOMETRY OFFSET 2 SPINDLE ORIENTATION FOR THE LOADING SPINDLES FANUC ROBOTIC AUTOMATION SYSTEM (2 ) LR MATE200/C/R-30IA MATE ROBOTS (2) ROBOT RISERS (2) END  ...

lathes / Multi-spindle turn automatics
date: 17.06.2024 add to watchlist
approved
dealer
item-No.: 158764827
New in: 1998

used

check Seller: ifa technologies s.r.l.
Location: Land-it

add to watchlist

Codice: 0222 - AI

lathes / Multi-spindle turn automatics
date: 21.06.2024 add to watchlist
approved
dealer
item-No.: 161190364
New in: 2021

used

check Seller: AMARON s.r.o.
Location: 60200 Brno Land-cz

add to watchlist

Inv. Num. : 6231 Type: 620 AC Producer: MORI-SAY Generated: 2021 Parameters: Control system: SIMATIC S 7 Operating hours: 1996 h Number of spindles: 6 pieces Maximum main spindle power: 9 kW Minimum main spindle speed: 500 1/min Maximum spindle speed: 6000 1/min bar diameter: 3-22 mm Maximum rod length: 3300 mm Drilling of the clamping tube: 28 mm Working time: 0.8-90 s Length: 6098 mm Width: 1230 mm Height: 2197 mm Weight: 5000 kg Cucchi Bar Feeder – BLT Multi F-6 AG0 Knoll High Pressure Cooling Hyfra Cutting Oil Cooling Batec Fire Extinguisher Filtermist 1000 Oil mist extraction Manuals Pick up Threaded coupling Channels to the feeder on dia. 6.9.13 mm including collets

lathes / Multi-spindle turn automatics
date: 23.02.2024 add to watchlist
approved
dealer
item-No.: 163426858
New in: 1975

used

check Seller: WTS Maschinenhandels GmbH & Co. KG
Location: 58515 Lüdenscheid Land-de

add to watchlist

- 6 spindles - Max. bar clearance: 63.0 mm - Rod guide and stand including many accessories (see photos)

lathes / Multi-spindle turn automatics
date: 23.01.2024 add to watchlist
approved
dealer
item-No.: 133633424
New in: 1989

used

check Seller: ifa technologies s.r.l.
Location: Land-it

add to watchlist

8-spindle rotary machine Built in 1989; serie 25 Refurbished in 2012 • New electrics • New bearings • Guided tours • CNC cross slide in position 7 • Spindle stop setup • Material rod guide • Chip conveyor • Pick-up spindle position 8 • Calibration device • Various tool holders • Various curves

lathes / Multi-spindle turn automatics
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 163754987
New in: 2018

used

check Seller: IFA Technologies srl
Location: brembate di sopra Land-it

add to watchlist

Country of origin: Germany, Number of spindles: 8, Auto bar loader: Cucchi BLT - bundle magazine

lathes / Multi-spindle turn automatics
date: 21.06.2024 add to watchlist
approved
dealer
item-No.: 125983130
New in: 1990

used

Location: Land-de

add to watchlist

Cam controlled multi spindle automatic lathe, used 6 main spindles, control: Siemens S5 PLC, electronical trip dog control type „Balluff gear box for thread milling (2 pieces) pick up for rear machining in pos. 6, work piece sorting shute, barloader: IEMCA-PRA 40/33 P -rack type- coolant pump, threading clutches, stock stand and reel, tooling: could be different like pictures partly revised

lathes / Multi-spindle turn automatics
date: 19.02.2024 add to watchlist
approved
dealer
item-No.: 144479361
New in: 1984

used

check Seller: turn-tec Produktion & Service GmbH
Location: 58540 Meinerzhagen Land-de

add to watchlist

Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1984 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without rod guide a ...

lathes / Multi-spindle turn automatics
date: 19.02.2024 add to watchlist
approved
dealer
item-No.: 144477822
New in: 1980

used

check Seller: turn-tec Produktion & Service GmbH
Location: Land-de

add to watchlist

Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1980 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Gv29e0 Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without ro ...

lathes / Multi-spindle turn automatics
date: 19.02.2024 add to watchlist
approved
dealer
item-No.: 133597947
New in: 1987

used

check Seller: turn-tec Produktion & Service GmbH
Location: Land-de

add to watchlist

Schuette multi spindle automatic lathe Pour SF 20-6 Curve controlled number of spindles: 6 with mechanical transmission Rod diameter: approx. 20 mm SW 17 mm AK 18 mm UK 14 mm Max bar feeder: 80 /(160) mm Independent longitudinal slide number: 6 Total / working ways (Standart): 63/40 mm "" (Special) to: 100/63 mm Number of independent cross slide: 6 Total / working ways middle and upper carriage up: 32/20 mm Lower carriage up: 40/25 mm Spindle diameter: 224 mm Main time min/max: 0.36/150 sec. Productive time min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 U/min 2. area: 355-2000 U/min Nominal power of the motor: 15 KW Power supply: 50 kVA The drive motor speed: 1500 rpm Length width (standard execution) 3705 1320 mm incl. Rod Guide (standard execution) 6335 mm Approximate weight without rod guide and accessories: 4.6 to. the rod gu ...

lathes / Multi-spindle turn automatics
date: 19.02.2024 add to watchlist
approved
dealer
item-No.: 144479316
New in: 1980

used

check Seller: turn-tec Produktion & Service GmbH
Location: Land-de

add to watchlist

Schuette multi-spindle rotary machine SF 26-6 1980 built -with thread cutting device - prepared for centrage suction system - standard Schuetz control D8gdo29 - mechanical gearbox - Balluff cam switch - standard rod guide

lathes / Multi-spindle turn automatics
date: 16.10.2023 add to watchlist
approved
dealer
item-No.: 144479345
New in: 1984

used

check Seller: turn-tec Produktion & Service GmbH
Location: 58540 Meinerzhagen Land-de

add to watchlist

Schuette multi-spindle rotary machine SF 26-6 1984 built - mechanical gearbox - independent feed from the Laengsschlitten Position 4 - Thread cutting gear with thread cutting spindle

lathes / Multi-spindle turn automatics
date: 19.02.2024 add to watchlist
approved
dealer
item-No.: 144479352
New in: 1987

used

check Seller: turn-tec Produktion & Service GmbH
Location: 58540 Meinerzhagen Land-de

add to watchlist

Schuette multi-spindle rotary machine SF 26-6 1987 built 6-spindle rod turning machine with hydraulic catch slide prepared for Co2 Loesch plant run with cutting oel Schuetz control mechanical gearbox separate hydraulic unit -- Pick-up device with hydraulic voltage and back-weighing machining without Spaenefoerderer standard pole guide unabhaenger Laengsschlitten feed to position 1,2,4,5 ...

lathes / Multi-spindle turn automatics
date: 12.02.2024 add to watchlist
approved
dealer
item-No.: 159643806
New in: 1996

used

check Seller: ifa technologies s.r.l.
Location: Land-it

add to watchlist

• Siemens 840 C controller • Location I + III + IV + VI: Longitudinal and transverse slide • Position II + V: CNC slide and longitudinal slide Bvxhlj3gi3 • Advance position VI • Interceptor Position VI • KS system (emulsion) • Loading magazine Cucchi model Multi-6 156C15, YOC 2015, • Ruez hinge belt conveyor in the machine bed • Hinge conveyor Knoll 280 S-1/40 ID 26565 (outside) • Electrostatic separator ISI RON/A 2500A, ID 26295 • Without further accessories / tools • CUCCHI BLT Model Multi -6 YOM 2015

lathes / Multi-spindle turn automatics
date: 19.02.2024 add to watchlist
approved
dealer
item-No.: 144479339
New in: 1980

used

check Seller: turn-tec Produktion & Service GmbH
Location: 58540 Meinerzhagen Land-de

add to watchlist

Thread cutting gear Pick-up device partially revised

lathes / Multi-spindle turn automatics
date: 19.02.2024 add to watchlist
approved
dealer
item-No.: 144479336
New in: 1975

used

check Seller: turn-tec Produktion & Service GmbH
Location: 58540 Meinerzhagen Land-de

add to watchlist

Schuette multi-spindle rotary machine SF 50/51-6 Rod turning machine run on schneidoel standart Schuetz control mechanical gearbox Hydraulics integrated into the machine with snail-spaenefoerer

lathes / Multi-spindle turn automatics
date: 17.04.2024 add to watchlist
approved
dealer
item-No.: 146701929

used

check Seller: AUER
Location: 4407 Steyr-Gleink Land-at

add to watchlist

various accessories / spare parts for Tornos AS 14

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information