Manufacturer:
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.

Manufacturer:
(Category: 102-121)

SEE 1
lathes / Bench Lathes For Precision Mechanics
date: 08.05.2024 add to watchlist
approved
dealer
item-No.: 160302705

used

check Seller: Weber Werkzeugmaschinen GbR
Location: Land-de

add to watchlist

Center height: 120 mm Center width: 450 mm Spindle passage/bore: 23 mm Board width: 100 mm Speeds: (12) 180 - 2240 min-1 Travel upper carriage: 140 mm Tailstock mount: MK 2 Quill stroke: 80 mm Motor power: 2.5 kW Connection: 400 V Dimensions approx.: 1300 x 880 x 1250 mm Weight approx.: 600 kg Equipment: Piercing device Quick release holder System Multifix, size Aa Machine light Coolant device

lathes / Bench Lathes For Precision Mechanics
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 155980202
New in: 2019

used

check Seller: FEYEN Maschinen GmbH
Location: ab Auslieferungslager Land-de

add to watchlist

turning diameter over bed: 310 mmturning diameter over slide rest: 178 mmturning length: 910 mmturning dia. in gap: 420 mmspindle turning speed range: 70 - 2000 U/minspindle bore: 38 mmnumber of feeds: 18 Stkfeed range: 0,052 - 1,392 mm/Umetrical thread cutting: 0,4 - 7 mmvoltage: 230 / 50 V Hztotal power requirement: 1,1 kWweight of the machine ca.: 0,45 tdimensions of the machine ca.: 1,6 x 0,8 x 1,4 m• incl. 3 and 4 jaw chuck• fixed and followed steadies• reducing bush MK4 - MK3• 2 fixed lathe centers• 1 Set of changing wheels• coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

lathes / Bench Lathes For Precision Mechanics
date: 03.06.2024 add to watchlist
approved
dealer
item-No.: 162185671

used

check Seller: ARSPT GmbH
Location: 4435 Niederdorf Land-ch

add to watchlist

Universal lathe Reiden S250 completely overhauled incl. accessories Preloved lathe in excellent condition has been completely overhauled incl. gearboxes etc. and is sold with some accessories (several bezels, three-jaw lining, etc.). Guides have been completely re-scraped, etc. Machine works and can be visited. We have to give away various accessories free of charge, as we have no use for them after the sale. Lathe has a crank to increase the turning diameter, e.g. when overtightening rims, etc. • Turning diameter above the bed up to 540 mm • Center height 250 mm • Distance between centers 2500 mm • Turning diameter above the face slide 310 mm • Turning diameter in offset 630 mm • Spindle speeds 16 - 1120 rpm • Dimensions L/W/H 3750/1100/1400 mm • Spindle bore 42 mm • Weight approx. 3500 Kg

lathes / Bench Lathes For Precision Mechanics
date: 06.02.2024 add to watchlist
approved
dealer
item-No.: 163302203

used

check Seller: Schrenk Werkzeugmaschinen
Location: 91126 Schwabach Land-de

add to watchlist

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 8 speeds from 220 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

lathes / Bench Lathes For Precision Mechanics
date: 22.06.2024 add to watchlist
approved
dealer
item-No.: 164041683

used

check Seller: Plum & Partner Werkzeugmaschinen GmbH
Location: Bünde bei Bielefeld

add to watchlist

turning diameter over bed: 260 mmturning diameter over slide rest: 140 mmturning length: 500 mmcentre height: 125 mmbed width: 160 mmspindle turning speed range: 16: 110-3600 U/minspindle bore: 28 mmface slide travel: 120 mmupper slide-adjustment: 120 mmtailstock quill taper MT: 2 tailstock quill adjustment: 80 mmdrive motor: 0,37 / 0,88 kWweight of the machine ca.: 350 kgdimensions of the machine ca.: 1,3 x 0,6 x 1,2 mElectric 380 Volt: chuck: 140 mmCollet device with collets: 25: 1-21 mm Boring chuck: Mechanics lathe with manual feed and spindle support, drive via V-belt and stepped pulleys as well as 2-pole motor, hardened, finely ground work spindle, support adjustment over the entire bed length using eccentric clamping lever, three-jaw chuck, collet device with pliers, crank tailstock, cast base.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulM ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information