Manufacturer:
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
lathes / CNC Turning Automatics
date: 12.04.2024 add to watchlist
item-No.: 163589652
New in: 2000

used

Seller: IproMac e.K.
Location: Deutschland

add to watchlist

turning diameter: 100 bis 400 mmtool taper: SO weight: 30 tcontrol: Siemens 840 D Ball machining centerSpecial facilityfor balls 100 to 400 mmA viewing and demonstration is possible by appointment.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

lathes / CNC Turning Automatics
date: 26.10.2023 add to watchlist
approved
dealer
item-No.: 160810016
New in: 2000

used

Location: Land-nl

add to watchlist

Turning diameter max: 20 mm Turning length max: 320 mm each spindle Drilling diameter max: 10 mm Max tap diameter: M8 Main spindle Speeds: 200 - 10,000 rpm. C-axis index: 0.001° Jerk spindle Speeds: 200 - 8,000 rpm. C-axis index: 0.001° Driven tools: 4 places / 200 - 5,000 rpm Driven tools rear: 4 places / 200 - 5,000 rpm. Tool turret: 10 places Bar feeder: FMB Diameter: 3 - 26 mm Rod length: 4,200 mm Country of origin: Japan Machine weight: 2800 kg Machine LxWxH: 3000 x 1400 x 1800 mm

lathes / CNC Turning Automatics
date: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794232

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Turret lathe manufactured by EMAG type NE 42Technical specifications:Tip height: 180 mmMax. Turning length: 400 mmlargest swing diameter over bed: 360 mmSpindle speeds: 55 - 2000 rpmSpindle bore: 42 mmExternal dimensions approx: 1800 x 800 x 1600 mmDrive power: 3.0 / 4.0 HPWeight: approx. 875 kgWith- Turret support with 6 tool stations- Collet device with 14 collets up to 32 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

lathes / CNC Turning Automatics
date: 11.04.2024 add to watchlist
approved
dealer
item-No.: 162303975
New in: 2021

new

check Seller: ZIEGLER Maschinenwelt GmbH
Location: Land-at
VS

add to watchlist

Ergomat TBC 60 - Multi-slide turning center - as good as new exhibition machine - Rod passage: 60 mm - Tool holder: VDI 25 Compact multi-carriage turning center with eight CNC axes, two-channel control and backside machining. Developed for the ready-to-use production of complex turned parts. - Fanuc 31i-TB dual-channel control - 8 CNC-controlled axes - 2 vertical shaped slides and piercing slides - CNC cross slide at the front - Rear CNC cross slide with servo-driven Sauter turret and driven tools - Tapping spindle integrated in the turret - Astonishingly short cycle times - Backside processing - Coolant device - Generously dimensioned working area for unhindered chip fall - Chip collector - Year of construction: 2021 Specifications: Rod passage: - Round material: 60 mm - Hexagonal material: 52 mm - Square material: 42 mm Main drive: - max. spindle speed: ...

lathes / CNC Turning Automatics
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 161710227
New in: 1989

used

check Seller: MARC
Location: 67500 HAGUENAU Land-fr

add to watchlist

Machine Details Stock-No. 1105-03889 Type of machine CNC Lathe Make FEMCO-ASTRHAL Type 20-60 Year of manufacture 1989 Type of control CNC Storage location HAGUENAU Country of origin taiwan Delivery time IMMIDIATELY Freight basis ex stock Price Technical details turning diameter 540 mm turning length 600 mm control Fanuc 10 T turning diameter over bed 540 mm turning diameter over slide 255 mm rapid traverse 15 (X/Z) m/min power capacity 11-15 kW Tool Numbers 12 chip conveyor 1 kW Additional information CNC-lathe clamping tool, main spindle, power chuck TAILSTOCK CHIP TANK cnc control fanuc 15 T 42 DIAMETER HOLE TTHE SPINDLE 11/15 KW 3500 RPM

lathes / CNC Turning Automatics
date: 21.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 163624234
New in: 2004

used

check Seller: Pyramid Mühendislik
Location: 34087 ISTANBUL Land-tr
Price: 25.000 € add to watchlist

Turning diameter 80 mm Bar diameter 20 mm Spindle speed 10000 rpm X1, Y1, Z1, X2,Z2 axes Controller Fanuc FANUC 160iB LNS barfeeder

lathes / CNC Turning Automatics
date: 09.11.2023 add to watchlist
approved
dealer
item-No.: 162779136
New in: 2014

used

check Seller: G+S Werkzeugmaschinen
Location: 82140 Olching Land-de

add to watchlist

Year of construction 2014 Control Siemens 840 Dsl Main Spindle: Motor Spindle Technology Speed 7,000 rpm Power 16 kW Torque 75 Nm Bar passage 50 mm Workpiece clamping collet chuck, Hainbuch Kombi Axfix Gr. 52 Counter spindle: Motor Spindle Technology Speed 7,000 rpm Power 16 kW Torque 75 Nm Workpiece clamping collet chuck, Hainbuch Kombi Axfix Gr. 52 Tool carrier I (X/Y/Z): Technology turret with 12 stations Tool holder VDI 25 Tool drive 8,000 rpm, 1.5 kW, 10 Nm Travel in X/Y/Z 165/70/360 mm Rapid traverse in X/Y/Z 30/15/60 m/min Tool carrier II (X/Y/Z/B): Technology turret with 12 stations and swivel axis Tool holder VDI 25 Tool drive 8,000 rpm, 1.5 kW, 10 Nm Travel in X/Y/Z 215/70/740 mm Rapid traverse in X/Y/Z 30/15/60 m/min B-axis -23.5°/158.5° Tool carrier III (X/Y/Z): Technology turret with 12 stations Tool holder VDI 25 Tool drive 8,000 r ...

lathes / CNC Turning Automatics
date: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794226

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Bendless automatic lathe make INDEX type E 60Fabr. -No: E 6072107 Year 1972largest material passage: 60 mmChuck diameter: 136 mmmax. thread diameter: M 30 / M 24Speed range: 134 - 2420 rpm.Working distance: 80 mmRapid traverse path: 50/62 mmlargest longitudinal path: 80 mmDistance quill to collet: 60 - 230 mmFeed infinitely variable: 5 - 3400 mm / minDrive power: 5.5 kWDimensions L x W x H: 1510 x 850 x 1500 mmWeight approx. 2000 kgWith- bar feed- various change wheels- hydr. Power Chucks- long turning device- Copy machine Fabr. SauterusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

lathes / CNC Turning Automatics
date: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794227

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Single spindle lathe make INDEX type ER 25Mash. -No: 25751408max. workpiece passage Drm.:25 mmxa0xa0xa06-edge: 21 mmxa0xa0xa0Square: 16 mmmax. workpiece feed p. Circuit: 70 mmmax. thread diameter: M 16 / M 14Speed range: 14 - 5750 rpm.Number of automatically switchable speeds: 4Number of overdrive speeds: 26Number of slow speeds: 234Turret diameter: 120 mmTool holder cone: 3/4 Turret processing: 60 mmDistance collet - Turret: 60 - 150 mmFeed rate infinitely variable: 16 - 2800 mmFeed rate continuously variable: 40 - 7000 mm / minRapid forward / backward: 10/25 m / minSwitching time: 0.75 sCross slide travel: 44 mmLongitudinal adjustment of the upper slide: 20 mmContinuous feed of the cross slide: 5 - 1000 mm / minDriving power: 4 kWDimensions L x W x H: 1900 x 1020 x 1650 mmWeight approx: 1650 kgWith- 8-fold revolver- 2 vertical parting carriages- 2 horizontal cut-off slidesused, in ver ...

lathes / CNC Turning Automatics
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156966337

used

Location: Land-de

add to watchlist

spindle passage: 34 mmturning length: . mmbore depth: . mmControl: Index type: S 3 live tooling: bar loader: Sameca total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

lathes / CNC Turning Automatics
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 161098556
New in: 2008

used

check Seller: AMARON s.r.o.
Location: Land-cz

add to watchlist

Inv. Num. : 6520 Type: Compact A25 Producer: Kovosvit Generated: 2008 Parameters: Control system: Fanuc bar diameter: 22 (26) mm Maximum rod length: 4000 mm Minimum main spindle speed: 50 1/min Maximum spindle speed: 8000 1/min Maximum main spindle power: 5.5 kW Length: 2250 mm Width: 1480 mm Height: 1890 mm Weight: 3400 kg The machine is completed with a guide tube for a 3-meter rod and an internal feed. Included in the sale are: Clamping and feeding collets Auxiliary heads (2x collet / 2x jaw) Collet holder VDI25 Axis tool holder VDI25 Straight and angled power tool holders. Equipping the machine with tools (square 12x12 mm and 16x16 mm)

lathes / CNC Turning Automatics
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 161098555
New in: 2005

used

check Seller: AMARON s.r.o.
Location: Land-cz

add to watchlist

Inv. Num. : 6521 Type: Compact A35 Producer: Kovosvit Generated: 2005 Parameters: bar diameter: 35 mm Maximum main spindle power: 7.5 kW Maximum spindle speed: 7000 1/min Number of CNC controlled axes: 8pcs Length: 2250 mm Width: 1480 mm Height: 1890 mm Weight: 3450 kg Equipment: Bar feeder (3 meters) LNS Sprint 555 Part of the sale: Collets Auxiliary head Polished holders VDI25/ER32 Axis tool holder VDI25 Straight and angled power tool holders Equipping the machine with tools (square 16x16 mm) The feeder is equipped with guide channels, pushers and reducing bushes

lathes / CNC Turning Automatics
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 162606592
New in: 2006

used

check Seller: SKM Industriemaschinen
Location: Bayern - 89264 Weißenhorn Land-de

add to watchlist

turning diameter over bed: 32 mmspindle passage: 32 mmturning length: 450 mmControl: GE FANUC MAIER PRO total power requirement: kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: 2,4 x 1,6 x 2,3 m mSwitch-on time: 70,076 hours.Automatic time: 40,135 hours.Counter spindle available (see pictures)Machine was converted for spindle production (see loading magazine), dismantlingAccording to the previous owner, this was easily possible.Machine brings alarms (see pictures)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

lathes / CNC Turning Automatics
date: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794229

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Turret lathe make MANURHIN type Dekomat 50Mash. -No: 3005-157Spindle bore: 50 mmgr. rod cover: 42 mmgr. Diameter of the chuck: 160 mmGr. working diameter: 120 mmSpindle drive pol. Engine: 4/8 hpNumber of programmed speeds: 4Number of speed groups: 5Speed range: 75 - 3200 rpm.Number of turret positions: 8long stroke: 150 mmLarge planing stroke: 49.7 mmgr. Radius difference when copying: 17 mmNumber of longitudinal feeds per cycle: 3 (+ 4 )Number of feedrates per cycle: 2 (+ 1 )Feed range longitudinal: 0-425 mm / minFeed range flat: 0-150 mm / minRapid traverse: 7 mm / minExternal dimensions without bar feed: 2300 x 1200 x 1500 mmWeight: 2000 kgWith- separate control cabinet- Connector panel controlusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you ...

lathes / CNC Turning Automatics
date: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794228

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Cam-type single-spindle turning machine make MAS Kovosvit type A 50 CA.Make -No: 007 built in 1991Max. Drm. of bar stock Infeed / Outfeed: 52/60 mmMax. Length of the bar material: 3000 mmMax. Displacement of the bar stock at feed: 90 mmSpeed range: 15 - 2244 rpmNumber of supporters: 4Max. Working stroke height of the supports: 45 mmNumber of turret settings: 6/8Max. Working stroke - height of the turret: 85 mmMax. Threaded by taps Thread:in steel: 24 x 1.5 mmin brass: 36 x 1.5 mmWeight: 2490 kgConnected load: 10 kVAExternal dimensions L x W x H: 2150 x 1125 x 1970 mmWeight: 2530 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

lathes / CNC Turning Automatics
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 163534417
New in: 2005

used

check Seller: AMARON s.r.o.
Location: 60200 Brno Land-cz

add to watchlist

Inv. Num. : 5274 Type: OPTIMAT A 42 Producer: MAS Created: 2005 Parameters: Max. rod diameter: 42 mm Maximum bar length: 3000 mm Maximum spindle speed: 3520 1/min Number of tools: 6 pieces Total power requirement: 10 kW Weight: 2500 kg Equipment: Technical Documentation Collets Tool Holder Shovel Piece counter 4 cross slides Device for longitudinal turning on the first carrier of the machine driven by its own curved disc Equipment for guiding material bars IVT 50

lathes / CNC Turning Automatics
date: 02.01.2024 add to watchlist
approved
dealer
item-No.: 160444197
New in: 2006

used

check Seller: DenTool LTD
Location: Land-dk

add to watchlist

Stock number: 3740 CNC LATHE Manufacturer: MAZAK, Type: QT 350 MY Nexus Machine NO.: 184678, Year of construction: 2006 Specifications: orbit diameter 420 mm dia. Max. rot. About bed 700 mm slide. Turning length 1538 mm Main engine power 30 kw Main spindle speed range 25-3300 rpm Spindle bore 102 mm dia. C axis - main spindle movement 0.001 degrees Z Ash movement 1607 mm Y axis 150 mm Tool turret 1 with 12 stations Driven stations revolver 1 12 pieces. Motor power driven tools 7.5 Kw Accessories: Hydr. Chuck main spindle Kitagava B-32/2 - 310 mm mm dia Hydr. Lunette Length: 4300 mm, Height: 4300 mm, Width: 2600 mm, Weight: 8600 kg

lathes / CNC Turning Automatics
date: 20.11.2023 add to watchlist
approved
dealer
item-No.: 161455252
New in: 1998

used

check Seller: DenTool LTD
Location: 0 Naestved Land-dk

add to watchlist

Stock Number: 3782 CNC LATHE Manufacturer: MIYANO, Type: BNE-51S Machine NO.: 98BX510077, Year of manufacture: 1998 Specifications: Max. swing diameter 51 mm dia. Main engine power 11/7.5 kw Main spindle speed range 4000 rpm Bore through drawing tube 51 mm dia. X axis movement 150 mm X2 Ash Movement 115 mm Z ash movement 380 mm Z 2 axis movement 125 mm Tool turret 1 with 12 stations Powered stations turret 1 6 pieces. Tool turret 2 with 10 stations Powered stations turret 2 5 pieces Counter spindle Motor power counter spindle 5.5/3.7 Kw Max. collet subspindle 41 mm/dia Control FANUC 18T Fabr. Accessories: Charger Kama B4265 fabr. Length: 2600 mm + magazines, height: 1950 mm, width: 2560 mm, weight: 6300 kg

lathes / CNC Turning Automatics
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 161197086
New in: 1991

used

check Seller: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Location: D-59302 Oelde Land-de

add to watchlist

turning diameter: max. 650 mmturning length: max. 790 mmcontrol: MORIC T5F turning diameter over bed: 890 mmturning diameter over cross slideways: 560 mmcentre distance: 900 mmMain spindle:: turning speed range - main spindle: 4 - 1.010 min/-1power capacity - main spindel: 37 / 30 kWmax. Torque: 3.870 NmNumber of speed ranges: 2 spindle bearing diameter: 240 mmspindle bore: 168 mmmax. bar capacity: 144 mmusable bar diameter: 120 mmspindle head: JIS A2 -11 chucking diameter: 610 mmturret:: number of toolpositions: 12 pos.Shank height for square tool: 32 mmDrill shank diameter: max. 65 mmaxis stroke:: x-axis: 350 (25 + 325) mmz-axis: 860 mmTailstock:: tailstock: 680 mmdiameter of quill: 110 mmquill stroke: 100 mmtaper of center: MK 4 feeds:: rapid traverse: X: 5 / Z: 8 m/minTipp feed: 0 - 1.260 mm/mintotal power requirement: 69 kVAweight of the machine ca.: 9,2 tdimensions of the mach ...

lathes / CNC Turning Automatics
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 163120631
New in: 2004

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 57.620 € add to watchlist

NAKAMURA-TOME SUPER NTM3 CNC turning centre was manufactured in 2004 in Japan. Distinguished by its wide machining capabilities and extensive equipment, the machine allows fully automated production processes, while maintaining high precision and reduced operating costs. The high-quality construction additionally effectively dampens any vibrations and ensures maximum process stability, which results in excellent turning results. Workpieces are machined in up to 11 axes using reliable tools stored in three 24-position tool heads. The NAKAMURA SUPER NTM3 CNC lathe is offered with an extensive range of equipment including a BREUNING IRCO SiMag bar feeder, a FANUC 16i-TB CNC controller and additional toolholders. The CNC dual-spindle lathe weighs 12000 kg. Technical specifications of the NAKAMURA-TOME SUPER NTM3 CNC lathe - number of axes: 11 - CNC control: FANUC 16i-TB - number of  ...

lathes / CNC Turning Automatics
date: 18.12.2023 add to watchlist
approved
dealer
item-No.: 161665732
New in: 2007

used

check Seller: DenTool LTD
Location: 0 Naestved Land-dk

add to watchlist

Stock Number: 3789 CNC LATHE Manufacturer: OKUMA, Type: LVT 300-M - Vertical Machine NO.: 132230, Year of manufacture: 2007 Specifications: Max. swing diameter 280 mm dia. Turning length 200 mm Main engine power 22/15 kw Main spindle speed range 40-4000 rpm C axis - main spindle movement 0.001 degree Tool turret with 12 stations Driven werkzeuumdr. 40-4500 rpm Control OSP 200 Fabr. Operating hours spindle 11485 hours Accessories: Load and Unload device Tool setter Chip conveying. Cooling water system. Length: 2800 mm, Height: 2500 mm, Width: 1500 mm , Weight: 5600 kg

lathes / CNC Turning Automatics
date: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794230

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Program controlled lathe type TRAUB type TF 60/140Machine -No: 194 Year 1976Max. Bar passage: 60 mmMax. Chuck: 120 mmMax. Clamping diameter: 130 mmSwinging diameter: 190 mm21 spindle speeds: 21 - 2000 rpm.switchable speeds: 4 right 2 leftSled trails: 125 mm along: 70 mm acrossinstalled power: 14 kWWith- Copying device- sweeping device- hydr. tensioning device- bar feed- 2 vertical slides- 2 horizontal slides- collet set- Three-jaw lathe chuckused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

lathes / CNC Turning Automatics
date: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794231

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Single-spindle automatic turret make TRAUB type TK 30Machine -No: 159 built in 1979Clamping diameter DIN 6343 up to: 30 mm11 spindle speeds: 400 - 4000 rpm.Crosswise support front / rear: 43/43 mmDrive power: 4.5 / 6.3 kWWeight approx: 1800 kgOutside dimensions approx: 1800 x 900 x 1600 mmWith- Cross support- Copying device- star turretused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

lathes / CNC Turning Automatics
date: 05.02.2024 add to watchlist
approved
dealer
item-No.: 163295563
New in: 1993

used

check Seller: Beppo Bercht Werkzeugmaschinen
Location: Land-de

add to watchlist

Key data: 200 mm, 420 mm

Control Traub TX 8 F Turning diameter / turning length 200 mm / 420 mm Spindle bore 42 mm Spindle speed range 10 – 5,000 rpm Machine weight approx. 4 t

lathes / CNC Turning Automatics
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 161098554
New in: 2000

used

check Seller: AMARON s.r.o.
Location: Land-cz

add to watchlist

Inv. Num. : 6522 Type: BS18-III Producer: Tsugami Mori Generated: 2000 Parameters: rod diameter: 18 mm Min. rod diameter: 3 mm Maximum spindle speed: 5000 1/min Number of all tools: 16 pieces Number of CNC controlled axes: 5 pieces Equipment: Bar feeder (3 meters) IEMCA Genius 226 Part of the offer: Guiding collets to feed Collet E140 of the main and counter spindle Reducing bushes (incl. collets ER11 ER16) Guide sleeve collet F609 Equipping the machine with tools (square 12x12 mm)

lathes / CNC Turning Automatics
date: 16.01.2024 add to watchlist
approved
dealer
item-No.: 151720221
New in: 1997

used

check Seller: Brand GmbH
Location: 01587 Riesa Land-de

add to watchlist

Manufacturer: WEILER Machine Tools Type: DZ 28 CNC Built: 1997 Connection power 25 kW Numerically controlled linear turning center for the production of precision workpieces in the small parts sector. The two machines are driven via a controller. As shown, the machine includes vertical material supply, the machining machine with chip conveyor and control devices, control cabinet and hydraulic unit. The machine was in operation at the site in Germany until production ceased. The machine is dismantled.

lathes / CNC Turning Automatics
date: 17.01.2024 add to watchlist
item-No.: 162278523

used

Seller: PX-Maschinenhandel
Location: 73635 Rudersberg Land-de
Price: 4.500 € add to watchlist

Weiler automatic lathe UD 24 CNC Siemens 820T P1 65574 P2 28618 380 V 11,25 KW Without tailstock Hydraulic feed and clamping Accessories

lathes / CNC Turning Automatics
date: 17.01.2024 add to watchlist
item-No.: 162278522
New in: 1989

used

Seller: PX-Maschinenhandel
Location: 73635 Rudersberg Land-de
Price: VB 4.200 € add to watchlist

Weiler automatic lathe UD 240CNC Bosch CC200T 270 mm length max Swing 190 mm Passage 24 mm rod Pneumatic clamping 8 tool slots Speed 5000 rpm Center height 130 mm P1 25563 hrs P2 1044266 h Power: 11.25 KW Rod magazine Collets Cheek chuck

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information