Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 – 6 A/C Machine no.: 7.0176 Year of construction: 1987 Weight: 11t General / technical data: Portal-6spindle automatic lathe with measuring device and automatic feeding Spindle dividing circuit: 300mm Number of longitudinal slides: 6 Number of cross slides: 2 gr. cross slide stroke: 60mm gr. longitudinal slide stroke: 125mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Stepless 1.95 – 78 sec. Low time range: 0.79 – 2.13 sec. Drive power: DC motor spindles 20kW; Feed rates 8kW Installation area: approx. 1720 x 4700mm Remark: The machine cannot be converted for bar work. Equipment: – 1 creep gear drive for set-up operation – 1 automatic central lubrication device – 1 coolant device with lines and pu ...
6-spindle automatic lathe Gildemeister GM 20-6 ( 25 mm ) + bar feeder IMECA BJ 2014 - only run in aluminum - partially overhauled in 2021 Make : Gildemeister / DMG - Mori Type : GM 20-6 ( 25mm version ) Built in : 2014 Operating hours ( Sand 17.11.2022 ) Total : 46.213 h Spindle hours : 29.612 h Number of spindles : 6 Maximum bar passage : 25 mm Spindle speed : 450 - 5000 rpm Bar feed max.: 100 mm / 180 mm Travel X ( radial slide ) : 42 mm Travel Y ( axial carriage ) : 50 mm Tool spindles travel : 88 mm Travel guide block : 50 mm All technical details + options available on request. Equipment - Enlarged bar passage 25 mm - Bar feeder IMECA SIR 25 P - 3 x red / 2 x fixed tool spindle with IKZ - Ejector rotating - Pick-up spindle with hydr. Collet - Double slide for rear side processing - Workpiece unloading chute - Screw chip conveyor - LOSMA oil ...
The machine is in good technical condition, by prior arrangement there is the possibility of testing.
spindle passage: 60 mmcross-slide: 4 turret head: 6 Pos.thread cutting attachment: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 60 mmcross-slide: 4 turret head: 6 Pos.thread cutting attachment: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 straight turning atchm. - working travel: . mmturret head: 8 thread cutting attachment: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartype: 6.26HS-4.4 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 straight turning atchm. - working travel: . mmturret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 straight turning atchm. - working travel: . mmturret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartype: 6.32HS-4.4 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 straight turning atchm. - working travel: . mmturret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartype: 6.30HS-4.4 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 6160 Type: GE 42 NC Producer: INDEX Generated: Parameters: Control system: Siemens Maximum turning length: 360 mm turning diameter: 300 mm Minimum spindle speed: 31.5 1/min Maximum spindle speed: 6000 1/min Total power requirement: 35 kW Equipment: Bar loader
Lathe Brand: KME All information without guarantee
The machine is in good technical condition, by prior arrangement there is the possibility of testing.Siemens control, spindle passage 36 mm, the machine is controlled via 4 channels, i.e. three buttons work simultaneously, the counter spindle is like a tool in a turret, it is machined with fixed tools,
BRAND: MICROCUT YEAR: 2017 MODEL: LD-65 PRODUCTION HOURS: 4100 APPLICATION TYPE: TURNING LOCATION: HUNGARY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 4500 KG CONTROL UNIT BRAND: FANUC MODEL: SERIES OI-TF MAIN DRIVE SPINDLE SPEED RANGE: 4000 RPM 1/MIN MEDIA MAIN ELECTRONIC CONNECTION: 400 V / 50 HZ Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - COUNTER SPINDLE - TURNING DIAMETER 650MM - WORKABLE DIAMETER 380MM - BETWEEN THE TWO SPINDLES 1020 MM - MAIN SPINDLE DIAM. 75 MM - CHUCK 200 MM - COUNTER SPINDLE 150 MM CHUCK
turning diameter over slide rest: / mmcentre distance: 1500 mmcopying travel longitudinal: / mmCenter height over flat track: 255mmCenter height above prism upper edge: 237mmTurning diameter over bed: 520mmTurning diameter over the short lower slide: 300mmTurning diameter over the continuous lower slide: 270mmFaceplate diameter: 500mmMain spindle rotation 18 over wheels: 9 - 450 rpmMain spindle rotation 12 via belt: 140 - 1800 rpmPower requirement: 7.5 - 15kWFeedsLongitudinal normal: 0.33 - 2.0 mm / revLongitudinal fine: 0.007 - 0.03 mm / revPlan normal: 0.012 - 0.9 mm / revPlan fine: 0.003 - 0.011 mm / revBed width: 403mmSpindle bore: 62mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
