Manufacturer:
(Category: 102)
Key data: 250 mm, 1200 mm, 200 mm
Turning length: max. approx. 1200 mm, tip height: approx. 200 mm, with separate control panel, machine light and 4-jaw chuck, Fabr. RÖHM, diameter: 250 mm, with accessories
Manufacturer GEMINI Model GHT9 G2 1,800 x 3,000 Year 2008 CNC FAGOR 8055 TC/C Capacity Point height 900 mm Maximum Bed Turning 1,835 mm Ø max. Turning on transverse carriage 1,425 mm Distance between points 3,000 mm Cross carriage travel 830 mm. Head Head hole diameter 150 mm Nose head DIN-55026-B15 Head revolutions 0-720 rpm Head ranges 2 In-service head power S1 82 kW Maximum head torque S1 10,750 Nm Progress Fast forward longitudinal carriage 8,000 mm/min Fast feed transverse carriage 6,000 mm/min Turret Quick-change turret, Multifix type INCLUDED Bench Width 1,000 mm Height 680 mm Counterpoint Tailstock shank diameter 180 mm Tailstock shaft course 300 mm Equipment Motorized tailstock with Manual Lock INCLUDED 4 Independent Claws Plate Ø 1400 mm INCLUDED Plate Protection INCLUDED Portable electronic steering wheel INCLUDED Longitudinal Chip E ...
Model : V550 CNC Vertical Lathe Year : 2012 Max cutting dia : 730mm Max cutting height : 730mm Table speed : 2000rpm 21" hyd. Chuck 10 Position Turret Gearbox Chip conveyor Fanuc control
Model : VTS-1620 CNC Vertical Lathe Year : 2013 Table : 1600mm manual chuck/10,000 kg load Table speed : 250 rpm Max swing : 2000mm Max cutting height : 1556mm X/Z : -127~1600mm/960mm Ram size : 308x250mm 37.5/45 kW motor 18 position ATC 8 tool holders Tool presetter Manual guide i Chip conveyor Fanuc control
engine lathe, year 2008. Used machine. More info & price on IndustrialBuyer.
A Takamatsu CNC twin-spindle turning and milling center is available. 1) Turning diameter: 190mm, turning length: 150mm, max. one-sided machining length: 440mm, max. bar diameter main spindle/counter spindle: 51mm/42mm, spindle nose 1/2: A2-6/A2-5, spindle bearing 1/2: 100mm/85mm, main spindle bore 1/2: 52mm/43mm, spindle speed: 5000rpm, tool stations: 2×12, travel X1/X2: 162.5mm/170mm, travel Z1/Z2: 500mm/500mm, travel Y: +/-35mm, travel A: 550mm, machine dimensions X/Y/Z: approx. 3000mm/2250mm/2100mm, weight: approx. 7400kg, control: Fanuc 32i-B. 2) TOP Automazioni FU350SX bar feeder, max. bar capacity: 52mm, max. bar length: 3200mm, max. remnant length: 300mm, max. feed rate: 30m/min, max. bundle weight: 2000kg, machine dimensions X/Y/Z: approx. 4300mm/1400mm/1200mm, weight: approx. 1200kg. 3) LTA E 120-X-2-H filtration system, year of manufacture: 2022, filter stages: 2, extraction ...
Offered for sale: Conventional center lathe with lead screw and feed rod. Distance between centers: 1500mm. Swing over bed: 630mm. Spindle speed range: 18-1800rpm. Number of spindle speeds: 21. Spindle bore: 90mm. Bed width: 433mm. Longitudinal feed: 0.08-3.26mm/rev. Cross feed: 0.04-1.63mm/rev. Equipped with digital readout, lathe chuck, four-way tool post and tailstock. Weight: approx. 3300kg. Overall dimensions X/Y/Z: approx. 3400mm/1420mm/1645mm. Inspection possible by arrangement.
turning diameter: 400 mmturning length: 650 mmcontrol: Siemens 840D SL x-travel: 275 mmz-travel: 700 mmspindle turning speed range: 4000 U/minspindle bore: 65 mmturret (x-stations): 16 Pcs. VDI30 tailstock quill taper MT: 4 swing dia.: 600 mmTools speed: 5000 U/mintotal power requirement: 37 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: LBH 2,5 x 1,6 x2,0 m- C-axis- 3 driven tools- 4-jaw chuck (Röhm, 250 mm)- Renishaw measuring arm- Chip conveyor- Interface for bar loader- Siemens ShopTurn- DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 300 mmspindle bore: 75 mmbar capacity: 65 mmturning speed range: 6.000 U/minturning length: 508 mmtravel -z axis: 560 mmtravel -x axis: 210 mmturret (x-stations): 24 control: FANUC 0i Smart Plus Touch c-axis: 0,001° 0total power requirement: 23 kVAweight of the machine ca.: 3,8 tdimensions of the machine ca.: LTH 2,9 x 1,7 x 1,8 mPower-on hours = 9,723 hrsProcessing time = 2,158 hrs- 24-station tool turret, driven tools at 6,000 rpm- Workpiece catcher- RENISHAW measuring probe, automatically swiveling- Sub-spindle- Chip conveyor- Coolant pump- Magazine equipped with static tools, including 2 driven toolsAccessories:Includes SAMSYS Multi3000 short-bar loaderIncludes collet chuckIncludes 38 colletsIncludes 210 mm power chuck with various jawsIncludes 130 mm power chuck for sub-spindleIncludes 2 x driven tool holders (radial + axial)Includes 10 static tool holdersIncludes ...
Control Fanuc 16-TC Max. turning diameter 20 mm Spindle speed 10,000 min-1 8-fold revolver with antr. Wkz. Linear slides (3 operated stations) Pick-up spindle (indexing 15°) C-axis main spindle Chip conveyor Extinguishing system Bar loading magazine FMB Turbo 3-26/3200
Turning length: max. approx. 1000 mm, centre height: approx. 250 mm, with coolant device, machine light, 4-jaw chuck, diameter: approx. 250 mm, hollow spindle diameter: 60 mm
turning diameter: Ø 2000 mmturning length: 3500 mmturning dia. over face-slide: 1500 mmtotal power requirement: 28 kWweight of the machine ca.: 22 tdimensions of the machine ca.: 10 x 3 x 3 mNo. 4944RAVENSBURG K 66 - 3500 (4350)Working range: Sph.1050x Spw.3500 (4350)Drive: 28 kWFaceplate Ø 1500 mmTailstockBed extension 700 mmRoller support Ø 150 - 1400 mmsteady restLathe Ø 2000 / 1500Spindle bore 90 mmSpeed range 0.6 - 250 min-1Space requirement approx. 10 x 3 x 3 mWeight approx. 22 tons20 % discount for ex-works deliveryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 4-axis Okuma LB200-MW was manufactured in 2006. It features a tool turret with 12 positions and driven tools, providing versatility for various machining tasks. The machine has a spindle bore of approximately 42 mm and includes optional equipment such as a chip conveyor and coolant tray. If you are looking to get high-quality turning capabilities, consider the Okuma LB200-MW horizontal turning machine we have for sale. Contact us for further details.
This 4-axis STAR MICRONICS SR20 was manufactured in 1998. It features a FANUC Series 16-T control unit and includes an IEMCA Bar Feeder for enhanced productivity. The machine is operational and in good condition, with occasional faults in the hydraulic system. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SR20 swiss type turning machine we have for sale. Contact us for further details.
Mazak Slant Turn 35 Ø 460 x 1000 mm CNCSwing over bed: 460 mm Distance centre tot centre: 1000 mm Max longitudinal travel Z-axis: 1028 mm Max cross travel X-axis: 335 mm Spindle cone: A2-6 Dia of spindle bore: 80 mm Power on the spindle: 18,5 kW Number of speeds: 4 > 2200 rpm Command: Mazatrol T32-3 Weight: 5 ton ACCESORIES: Chipconveyor Chuck: Kitagawa Toolchanger: yes Number of tools: 16x
A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible
Turn-mill centre manufactured in 1973. This MAX MULLER 3000 / Norma 2900 x 850 features a turning length between centers of approximately 2850 mm and a faceplate diameter of Ø 630 mm. It is equipped with a SIEMENS CNC Control and has a drive power of 32 kW. If you are looking to get high-quality turning capabilities, consider the MAX MULLER 3000 / Norma 2900 x 850 machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 2022. This Okuma GENOS L2000-e features a maximum turning diameter of 220 mm and a turning length of 500 mm. It is equipped with a spindle power of 15 kW and a spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L2000-e machine we have for sale. Contact us for further details.
CNC Vertical Lathes, (2) DOOSAN V400, - CNC Control Model: Fanuc i-series, - Spindle Nose: ASA 8, - Max. Turning Diameter: 500 mm, - Max. Turning Length: 450 mm, - Main Spindle Speed: 3,000 RPM, - First Turret Tool Stations: 12, - X-Axis Travel: 265 mm, - Z-Axis Travel: 490 mm, The machines can be inspected under power at our warehouse in Gussago (BS), Italy., Mimu Macchine Utensili
Conventional turning machine GRAZIANO SAG 14 - 180 x1000 mm, The Graziano SAG 14 is an Italian-made centre lathe, renowned for its high rigidity, precision, and long-term reliability; it features a natural gap, allowing for the machining of large-diameter workpieces near the headstock., Height centres: 180 mm, Distance between centres: 1000 mm, Bed width: 280 mm, Swing over crosslide: 220 mm, Spindle nose cam-lock din55029: 5 , Spindle speed: 40-1500 giri/1, Number of spindle speeds: 12, Spindle bore: 51 mm, Taper of quill mt: 4, Tailstock quill diameter: 4 Kw, Spindle motor power: 50 mm, Approx net weight: 1.400 Kg, Accessories: Self centering chuck, quick change tools turret
centre height: 280 mmcentre distance: 1000 mmturning diameter over bed: 570 mmturning diameter over slide rest: 340 mmturning length: 1000 mmspindle head: A8 DIN55027 spindle diameter: 120 mmspindle bore: 83 mmtorque: 1600 Nmturning speed range: 1-2500 (2 Stufen) U/minworktool system: Multifix C face stroke: 340 mmrapid power traverse in X-and Z direction: 5 / 10 m/minfeed Z / X: 0,001 - 20 m / Ufeeding dorce: 10000 / 7000 Ntailstock quill diameter: 80 mmtailstock quill stroke: 160 mmtailstock quill taper ISO: MK 5 total power requirement: 15 kWWeight: 3550 Kgdimensions of the machine ca.: 3,85 x 2,30 x 1,80 mWEILER D3 Control Unit (SIN810D),Three-Jaw ChuckMultifix C Steel Holder,Chip Conveyor,Various Interchangeable JawsMULTIFIX C Quick-Change Steel HoldersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 500 mm, 1000 mm, 2500 1/min
Control: Name: Siemens 840 D Travels: x-travel: 382 mm // z-travel: 1080 mm Technical data: • Speed range 20-2500 rpm • Turning diameter 500/600 mm • Turning length 1000 mm • Spindle bore 136 mm • Rod diameter 121 mm • Torque 2200 Nm • Automatic hydraulic bezel • 12-fold tool turret
Mori Seiki NT 5400 DCG - 1800 SZYear of manuf. : 2009 Control : Fanuc 30i (MSX-711) Turning diam. : 920 mmTurning length : 1800 mm____________Description:In General:Year of manufacture:2009Control system:Fanuc 30i (MSX-711)Max. turning diameter:920 (470) mmTurning length:1,800 mmBar capacity:103 mmMilling spindle:8,000 rpm, HSK 100Main spindle:RPM:2,400Max. power:37 kWMax. torque:1,432 NmC-axis:0.001°Chuck:SMW Autoblok KNCS 500-155Sub spindle:RPM:2,400Max. power:37 kWMax. torque:1,432 NmC-axis:0.001°Chuck:SMW Autoblok KNCS 500-155Tool carrier I (X/Y/Z/B):Technology:Traveling column with milling spindleMilling spindle:8,000 rpmPower:30 kWTorque:302 NmTool holder:HSK 100X-axis:1,040 mmY-axis:510 (+/- 255 mm) mmZ-axis:1,940 mmB-axis:+/- 120°, index 1°Tool carrier II (X/Z):Technology:Cross slide with tool turretTool drive:6,000 rpm, 40 NmNumber of stations:10X-axis:267 mmZ-axis:1,8 ...
This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information.
turning diameter: 800 mmturning length: 2000 mmcontrol: MONFORTS control: Control System MTC-K centre height: 400 mmcentre distance: 1970 mmswing over bed: 830 mmswing diameter over slide rest: 540 mmspindle bore: 135 mmface slide travel: 450 mmspindle turning speed range: 2 - 1600 U/mintransmission ratio: 4 feed power X/Z axis: 11,3 / 23,9 kNrapid traverse X-axis: 4 m/minrapid traverse Z-axis: 6,8 m/mintailstock quill diameter: 125 mmtailstock quill stroke: 200 mmtailstock taper MT: 6 total power requirement: 53 kVAweight of the machine ca.: 6 tdimensions of machine L x W x H: 4,35 x 2,17 x 2,10 mAccessories: 3-jaw chuck 630 mmø, MULTIFIX head D, various tool holders, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 560 mmturning length: 2000 mmcontrol: Heidenhain ManualPlus swing diameter over face slide: 340 mmspindle turning speed range: 1-2500 U/minspindle bore: 63 mmrapid travel - longitudinal/face: 10 / 7 m/mintailstock quill taper MT: 5 tailstock quill diameter: 70 mmtailstock quill stroke: 160 mmmain drive motor: (100 / 60 % ED) 15 / 20 kWmax. torque on the spindle: max. 1800 Nmmax. workpiece weight -without tailstock: 500 kgmax. workpiece weight between centres: 1000 kgweight of the machine ca.: 3,6 tdimensions of the machine ca.: 5,5 x 2 x 2 mEquipment: CNC-control Heidenhain Manual Plus M 3-jaw manual chuck Multifix tool holder 3 steady rests Coolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max.working dia. 550mm. max. working length 2500mm. P motor 15Kw, weight of lathe 15 ton
max.working dia.above the carriage 650 mm. ,max.working length 4000mm., max.working weight 16 ton., P motor 36 kW, weight of lathe 46 ton
vertical CNC turning center, year 2008, CNC OSP-P200L. Used machine. More info & price on IndustrialBuyer.
496 € 
