Manufacturer:
(Category: 102)
turning diameter: 430 mmturning length: 519-525 mmcontrol: Mori seiki MSX-805 x-axis: 230 mmz-axis: 520 mmtotal power requirement: kWweight of the machine ca.: 4100 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, dual tool carriers with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant cleaning system and a hinged belt conveyor for efficient chip removal. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC65 DG horizontal turning machine we have for sale. Contact us for further details.
: 0560 mm: 390 mm: 2000 mm: 280 mm: 80 mm: 11,25 kWspindle turning speed - stepless: 20-2000 U/minspindle taper: K 8 DIN 55027 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 L+Z lathe Make: VDF-Oerlikon Boehringer Model; DUE 560 Year of Make: 1986 Turning diameter over bed: 570 mm Turning length: 1000 mm Speed range: 11.2 - 2240 rpm Weight of the machine: 3.8 tons. Accessories / equipment: digital display, chip protection. Conveyor belt cover, Coolant device, rapid traverse.
Control Fanuc 0i-TF Main spindle: Motor spindle technology Speed (max.) 10,000 rpm Power (max.) 3.7 kW Bar passage 20 mm Travel in Z (longitudinal turning mode) 205 mm Workpiece Clamping Collet Chuck Guide Bush Synchronous Running Sub-spindle: Motor spindle technology Speed (max) 9,000 rpm Power (max.) 1.1 kW Workpiece Clamping Collet Chuck Pneumatic ejector Linear slides: Number of lathe chisel stations 6 Tool holder 12 x 12 mm Number of stations drilling rig 4 Tool drive 8,000 rpm Number of stations frontal drill quill holder 4 Tool holder Ø22 mm Residual apparatus: Number of stations 4 Tool holder Ø22 mm Tool drive 8,000 rpm Equipment/accessories: Chip Management Chip Conveyor Coolant management coolant pump with filter Raw material feed loading magazine, FMB minimag 20 Precast Removal Conveyor Belt with Drip Tray Tool holders Div. rigid and ...
Horizontal turning machine manufactured in 2023. This HAAS ST-15 features a maximum spindle speed of 4000 RPM and includes a 12-station bolt-on turret. It comes equipped with a Haas Bar Feeder and a hinged belt chip conveyor for efficient operation. If you are looking to get high-quality turning capabilities, consider the HAAS ST-15 machine we have for sale. Contact us for further details regarding this machine.
This 4-axis HAAS DS-30SSY was manufactured in 2013. It features Y-axis milling capability, a sub-spindle, and live tooling, enhancing its versatility for various machining tasks. The machine includes a 12-station bolt-on turret and comes equipped with a chip conveyor and mist collector. If you are looking to get high-quality turning capabilities, consider the HAAS DS-30SSY horizontal turning machine we have for sale. Contact us for further details.
turning diameter: 320 mmturning length: 1100 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS CNC controls FANUC BASIC FUNCTIONS number of spindles: 2 number of turrets: 2 live positions: yes number of c-axes: 2 number of y-axes: 1 number of b-axes: 1 WORKING RANGE TURNING bar diameter (max): 50 mmMAIN SPINDLE spindle revolutions (max): 5000 /min drive power: 11 kW spindle bore diameter: 50 mm c-axis: yes COUNTER SPINDLE spindle revolutions (max): 5000 /min drive power: 7.5 kW c-axis: yes Z-axis travel: 465 mmX/Z SLIDE tool fixture: Turret number of tool positions (total): 24 number of live positions: 24 - rotation speeds (max): 6000 /minELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 4500 mm space requirements -front/back-: 2200 mm total height: 1900 mm total weight approx.: 5500 kgATTACHMENTS (TURNING) ...
turning diameter: 315 mmturning length: 1000 mmcontrol: Siemens type: Sinumerik 802 Dturning diameter over slide: 160 mmspindle hollow: 52 mmTool changer: 12 turning speeds: 30-3300 U/minchip conveyor: total power requirement: kWweight of the machine ca.: 6 tdimensions of the machine ca.: mMachine has been overhauledDie techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor, es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen.Über unsmehr als 400 eigene Maschinen im Lagerüber 15.000 m² Lagerfläche, Krankapazität 70 tmehr als 10.000 Artikel Zubehör für Ihre WerkstattSie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen,dann sprechen Sie uns an.Weitere Angebote finden Sie auf unserer Webseite.Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Mar ...
Star SB-20R type GYear of manuf. : 2022 Control : Fanuc 0i-TF ____________Description:Mainspindle:Technology:MotorspindleSpeed (max.):10.000 rpmPower (max.):3,7 kWBarcapacity:20 mmMovement in Z (Longturning mode):205 mmWorkpiececlamping:Collet chuckGuide Bush: Running synchronouslySubspindle:Technology:MotorspindleSpeed (max.):9.000 rpmPower (max.):1,1 kWWorkpiececlamping:Collet chuckEjector:PneumaticLinearslide:Number of stations lathe tools:6Taper:12 x 12 mmNumber of stations Drilling unit:4Tooldrive:8.000 U/minNumber of stations front drilling quill holder:4Taper:Ø22 mmRear attachment:Number of stations:4Taper:Ø22 mmTooldrive:8.000 rpmEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Coolant pump with FilterRaw-material feed:Barlaoder, FMB minimag 20Finished-part-removal:Conveyor belt with collection trayToolholder:Misc. static and driven toolholderFurther Equi ...
Dörries Contumat VCE 2000-160Year of manuf. : 1991 Control : Siemens 840 Dsl Turning diam. : 1600 mmTurning length : 1800 mm____________Description:In General:Year of manufacture:1991 / 2010Control system retrofit:2010Control system:Siemens 840 DslCircumferential diameter:2,000 mmTurning diameter:1,600 mmTurning height:1,800 mmTable / Faceplate:Technology:Gear-driven tableSpeed:315 rpmPower:105 kWMax. torque:50,000 NmFaceplate:1,600 mmMax. table load:12,000 kgTool carrier:Crossbeam travel (vertical):1,200 mmChisel slide travel:1,500 mmSupport travel (horizontal):2,300 (+/-1,150) mmPenetration diameter:340 mmChisel slide cross-section:240 x 240 mmEquipment:Tool magazine:20 stationsChip removal:Chip conveyorCoolant supply:Coolant system with filterTool measurement:ProbeSet-up:Electronic handwheelTool holders:Various tool holdersControl system overhaul:Year of overhauling:2010Technol ...
Key data: 324 mm, 600 mm
Control: HEIDENHAIN CNC Pilot 4290 Max. spindle speed: 5,000 1/min C-axis Max. bar passage: 65 mm Travel: X= 260, Z= 630 mm 12-station turret (all driven, max. 4,500 rpm) Tailstock Tailstock stroke: 580 mm Chip conveyor Dimensions LxWxH: 3500 x 2440 x 2100 mm (without chip conveyor) Weight: 6,000 kg Switch-on hours: 32,600 h Spindle hours: 7,600 h
: neu : Bulgarien : 109100 €: 2061.99 €: 890 mm: 3000 mm: 400 mm: 155 mm: 490 mm: 700 mm: 15 : 160 MK: 24 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 22 kW: 7500 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 94 720,00 turning length2.000 mm € 98 220,00 turning length4.000 mm € 117 110,00 turning length5.000 mm € 128 100,00 turning length6.0 ...
turning diameter: 376 mmturning length: 760 mmcontrol: FANUC I-Series Plus greates pass round over bed: 780 mmswing diameter over slide rest: 630 mmmax. turning diameter: 376 mmspindle turning speed range: 4000 U/minspindle drive motor: 22 / 15 kWspindle nose: ASA A2-8 spindle bore: 81 mmbar material dia.: 76 mmc-axis: 0,001 °chucking diameter: 255 mmNumber of tools: 12 St.travel -x axis: 260 (72 + 188 ) mmtravel -z axis: 830 mmtravel -y axis: 105 (+/- 52,5) mmdiameter of quill: 100 mmquill stroke: 100 mmtailstock taper MT: MT 5 total power requirement: 41,98 kVAweight of the machine ca.: 6,1 tdimensions of the machine ca.: 4,0 x 2,5 x 2,2 mCNC control FFANUC I-Series Plus- chip conveyor- driventools 5000U/min, 7,5kW- C-axis- hydraulic unit- tailstock- coolant 7 bar- bar loader interfaceCapto C3 straight chair: 2Capto C3 90° chair: 1ER20 Capto chuck: 10ER32 Capto chuck: 4Weldon-to-Capt ...
turning diameter over bed: 3750 mmturning diameter over slide rest: 3250 mmturning length: 15000 mmcentre distance: 15000 mmfaceplate: 3000 mmworkpiece weight: 120 tsteady: + 15t Rest: 2 main drive: 119 kWspindle bore: 105 mmspindle turning speed range: 0,33 - 75 U/minfeed in x - axis: 300 mm/minfeed in y - axis: 150 mm/mintailstock quill diameter: 500 mmtotal power requirement: ca 140 kWweight of the machine ca.: - tdimensions of the machine ca.: - m- 2-Carriages- Face Plate 3000mm- 6-Steady Rests- 4-Way Bed Construction- Taper Attachment- Inch/Metric Threading- Tailstock With Live CenterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 2,25/3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis Okuma GENOS L200E-M was manufactured in 2011. It features a maximum turning diameter of 200 mm and a Z-axis travel of 380 mm. The machine is equipped with a 12-station turret with driven tools, allowing for milling and drilling on the C-axis. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning center we have for sale. Contact us for further details.
Excellent condition - Fully operational - Loading / Transport possible! CNC automatic lathe GILDEMEISTER SPRINT 20 linear (2010) Connection hours 39836 h Cutting hours 10495 h Number of axes 8 Number of spindles 2 MAIN SPINDLE Bar diameter 20 mm Stroke 80 mm Spindle speed 10000 rpm Spindle power 3.7 kW C-axis indexing accuracy 0.001°. COUNTERSPINDLE Bar diameter 20 mm Stroke Z 300 mm Stroke X 240 mm Spindle speed 10000 rpm Spindle power 3.7 kW C-axis indexing accuracy 0.001° GUIDE BUSH SUPPORT Number of positions 11 Number of motorized positions 5 Tool speed 6000 rpm Stroke X 50 mm Beam Y 350 mm Automatic bar feeder IEMCA BOSS 332 E 32N (2010) Automatic translation
Excellent condition - Fully operational - Loading / Transport possible! Workpiece: Max. clamping diam. 26 mm 9 main spindles: Spindle 1 to 6: rated torque 18,5 Nm max. torque 50 Nm Max. speed 7,000 rpm Spindles 7 to 9: rated torque 15 Nm max. torque 30 Nm Max. Speed 10,000 rpm Travels (cross slide): X (spindles 1 to 6): 70 mm X (spindles 8 to 9): 110 mm Z: 125 mm Feeds: 30 m/min Feed power: 3kN Travels (longitudinal slide): X: 16 mm Z: 300 mm Feed power 3kN Feeds: 30 m/min CNC Siemens 840 D Swarf conveyor and chiller 21,1 Kw Knoll chiller With CUCCHI compact bar feeder 26 mm (rounded), 19 mm (squared), 22 mm (hexagonal) bar length: 4200 mm
Excellent condition - Fully operational - Loading / Transport possible! Twin spindle Swing over bed: 530 mm Turning length: 330 mm X-Axis travel: 210 mm Z-Axis travel: 310 mm Rapid traverse: 30 m/min Spindle speed: 8000 Rpm Spindle configuration: A2-4, 5C Spindle bore: 27 mm Turret type: VDI 25 Live tool speed: max. 6000 Rpm Number turret positions: 16 Control: GE Fanuc Series 18i-TB Incl various tool holders a.o. 6x driven toolholders Note! No tooling Bar Feeder: BARLOAD Type: Hydrafeed BA 65 S/N: 16080043 Year 2009 Bar length: 1200 mm Bar diameter: 5-65 mm Bar capacity: 10 pcs (65 mm) Dimensions: 1910x1000x1250 mm Weight: 320 kg
This 5-axis MORI SEIKI SL-153 SMC was manufactured in 2000. It features a maximum X-axis travel of 230 mm and Z-axis travel of 520 mm. The machine includes a hydraulic chuck system, chip conveyor, and multiple driven tool holders for enhanced machining capabilities. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-153 SMC horizontal turning machine we have for sale. Contact us for further details.
This 3-axis Gildemeister CTX 400 Serie 2 was manufactured in 2002. It features a spindle speed of up to 5,000 rpm and a z-axis travel of 635 mm, along with an x-axis travel of 570 mm over the bed. The machine includes a 12-position turret and is equipped with a 3-jaw chuck, chip conveyor, and coolant system. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 Serie 2 machine we have for sale. Contact us for further details.
This 5-axis Okuma LB 300M X 500 was manufactured in 2012. It features a maximum turning diameter of 340 mm and a turning length of 480 mm. The machine is equipped with a powerful spindle speed range of 45 - 3,800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma LB 300M X 500 horizontal turning machine we have for sale. Contact us for further details.
: neu : Bulgarien : 115600 €: 2184.84 €: 1090 mm: 3000 mm: 500 mm: 155 mm: 690 mm: 700 mm: 15 : 160 MK: 24 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 22 kW: 7500 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS turning length1.500 mm € 101 220,00 turning length2.000 mm € 104 720,00 turning length4.000 mm € 123 610,00 turning length5.000 mm € 134 700,00 turning length6 ...
Key data: 290 mm, 450 mm, 5000 1/min
Control: EPL Country of origin: Germany Spindle passage: Ø65 mm Tool turret: 12-fold driven places Tool holder: VDI 40 Speed tools: 3000 rpm Weight: approx. 4,700 kg + 600kg control cabinet Chip conveyor: BMF Bürener Maschinenfabrik Bar feeder: GIOVANNI CUCCHI, type DB 70 Tools for an extra charge There are a total of 6 machines with bar feeder (price per machine with loader) Dcjwvey N Tdzeu Nu Ieg There is 1 machine without loader available (€ 8.500,-)
DMG MORI CL2000A CNC turning center was built in 2017 in Japan by DMG MORI CO., LTD. The machine is new and has never been used. The DMG MORI CL2000A is an excellent choice for the production of high-precision and repeatable parts used in many industrial sectors. This compact yet extremely powerful lathe will excel in even the most demanding production challenges. All machining processes, i.e. precision turning or threading, are performed fully automatically by means of the spindle and the cutting tools, taken from a 10-position turret. The spindle, driven by a high-powered motor, rotates at a maximum speed of 4500 rpm and operates in two X,Z axes with feeds of 245 mm and 370 mm respectively. What’s more, the machine’s design is based on the Finite Element Method (FEM). This solution guarantees the maintenance of high geometrical accuracy of the design, even under heavy loads. ...
turning diameter: 550 mmturning length: 1500 mmcontrol: Fagor 8055 x-axis: 108 mmz-axis: 3000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
