Manufacturer:
(Category: 104)
width of the strips: 100 mmband length: 2000 mmband speed: 15/30 m/sectube diameter: 20 - 76 mmangle adjustable from - to: 30 - 90 Gradconnected load frequency: 400 Vtotal power requirement: 2,5 /3,3 kWweight of the machine ca.: 0,19 tdimensions of the machine ca.: 1,2 x 0,75 x 0,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A., workpiece diameter automatic mode: 3 - 20 mm, workpiece diameter semi-automatically: 3-32mm, workpiece length semi-automatic: 3-32mm, workpiece length: 30-150 mm, Drive power grinding spindle: 4.0 kW, Spindle speed grinding spindle: 2000 rpm,, speed of the cylindrical grinder: 1500 rpm., cutting wheel diameter: Max. 200 mm, Electrical connection: approx. 7 kW (400 V / 50 Hz), Dimensions L x W x H: 2000 x 1500 x 1500 mm, mass: approx. 1,600 kg, colour: gray RAL 7035, Dimensio ...
Loading trolley for all Vollmer ND loading centers available in as-is condition, unpainted or completely new and freshly painted.
table diameter: 1000 mmworkpiece height: 25 mmnumber of wheels: 1 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring., Circular saw blade diameter: 200 - 840mm, Circular Saw Bore Diameter: from 16 mm, Tooth pitch: 6 - 180mm, grinding path: up to 25 mm, tangential relief angle: 0 to 10 degrees, max. grinding wheel diameter: 125 mm, Grinding wheel bore diameter: 32 mm, Grinding spindle variable: 1600 - 5500 rpm,, Conn ...
Description: Suitable for dressing and profiling diamond and CBN grinding wheels. ccesories: Total enclosure., Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel),, Wheel motor strengthened to 4 kW,, Dressing wheel motor strengthened to 2,2 kW,, 2 Machine lights 12 V,, Optical linear scale with digital display counter (0,001 mm) X, Z Axes,, 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120X included),, High performance swivelling angle reader (0,05°),, Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm,, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm,, Stepless oscillation speed,, Automatic central lubrication,, SIC Wheel dresser manual,, Grinding wheel holder:: HSK 50 E, Diamond grinding wheel diameter: 50 - 250 mm, max. width of grinding wheel: 70 mm, Grinding wheel bore diameter: 20 mm, Speed of ...
Suitable for dressing and profiling diamond and CBN grinding wheels., Accessories: Total enclosure, Rush camera system with high-resolution B / W camera (15x, 30x, 60x zoom), autom. Zoom control, video overlay (CAD drawing on live image) with 22 LCD monitor and Ruvision software, On-board PC with Windows and 17 monitor, Glass scale on the linear axes X and Z, 2 machine lights 12 V, Cooling system 30 Liter tank, Automatic delivery and tilting via servomotors, control panel with touch, Automatically starting position at the end of the work process, Central lubrication, Mist extractor., Specifications: Grinding wheel holder HSK 50 E, diamond grinding wheel diameter 50 - 250 mm, max. grinding wheel width 70 mm, grinding wheel bore diameter 20 mm, speed of the diamond / CBN wheel spindle stepless adjustable 100 - 1000 rpm, connected load of the motor of the grinding wheel 1,75 kW, grinding wh ...
Machine designed for profiling and dressing flats, side, angular, radius and special shapes on diamond and CBN wheels. Especially suitable for single or multiple wheel packs., Accessories: Optical linear scale with digital display counter (0,001 mm) X, Z Axes 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120 factor zoom included), High performance swivelling angle reader (0,05°) Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm Stepless oscillation speed, Automatic central lubrication Manual dressing device for silicium wheel Spindel-motor power max. 3 PS (2,25 kW) Dressing-spindle motor power 2 PS (1,5 kW) Plexiglass splashguard Extractor Optional available: Telecentric zoom system & DXF file convert & graphic include : - PC - Screen : upgrde to 22 - Backlight : upgrade to vertica ...
Machine designed for profiling and dressing flats, side, angular, radius and special shapes on diamond and CBN wheels. Especially suitable for single or multiple wheel packs., Accessories:, Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel),, Wheel motor strengthened to 4 kW,, Dressing wheel motor strengthened to 2,2 kW,, 2 Machine lights 12 V,, Optical linear scale with digital display counter (0,001 mm) X, Z Axes,, 2/3” TV Camera with 19” LCD monitor (microscope with zoom 15‐70X included),, High performance swivelling angle reader (0,05°),, Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm,, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm,, Stepless oscillation speed,, Automatic central lubrication,, SIC Wheel dresser manual,, Protection cover., Specifications: Wheel spindle taper: HSK50E (alternatives possibl ...
grinding length: 800 mmgrinding width: mmworkpiece height: 400 mmControl: total power requirement: 60 kWweight of the machine ca.: 17 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 360 mmgrinding length: 650 mmcentre height: 180 mmControl: SIEMENS 840 D total power requirement: 15 kWweight of the machine ca.: 9500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. grinding diameter: 300 mmgrinding length: 500 mmworkpiece length: mmNumber of axles: 6 St.centre height: 220 mmcentre distance: 500 mmx-axis: 500 mmy-axis: 320 mmz-axis: 320 mmtotal power requirement: 5 kWweight of the machine ca.: tdimensions of the machine ca.: mHeight of centres 200 mmDistance between centres / clamping length 750 / 500 mmTable size 290 x 1,600 mmIntermediate table 110 x 1,200 mmX / Y / Z axes 500 / 320 / 320 mmFeed speeds, X, Y & Z axes 0.005 - 5 m/minGrinding head swivelling, vertical axis (B axis) 300 °Grinding head tilting (C axis) +/- 30 °Speed range of R axis 0 - 50 rpmGrinding spindle speeds, approx. 5,000 - 10,000 rpmWorkpiece holding fixture 50 ISOIndexing 1 - 999 °Leads 0.5 - 10,000 mmSpindle drive 4 kWTotal electrical load, approx. 10 kW - 380 V - 50 HzWeight, approx. 4,000 kgAccessories / Special Features SCHÜTTE CNC Continuous Path Con ...
workpiece diameter: 250 mmcentre distance: 0 mmhoning length max.: mmmax. module: 5 Gear Ø, min./max. 10 / 250 mmModule range 1 - 5Length of teeth / max. table stroke 500 mmHeight of centres of tailstocks 220 mmMax. weight of workpiece 50 / 100 kgHoning head swivelling +/- 35 °Speeds of honing tool 20 - 500 rpmSize of honing tool, Ø x width 300 x 40 mmWorkpiece speeds 500 - 3,000 rpmTotal adjustment of cross slide 270 mmRapid traverse of cross slide 50 mmInfeed travel of cross slide, mechanical 1 - 8 mm/ØRoughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/secTable speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 HzWeight 3,200 kgAccessories / Special Features Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. All roughing and finishing infeeds can be adjusted by a decade switch, as well as b ...
turning speeds: 24000 U/minfrequency: 0 Hzoutput: kwHigh Frequ. Grinding spindle,type:TSSV 150 - 15000/16, 16 kW,dia 150 x lgth 400,15.000rpmTSSV 150 - 15000/16, 16 kW,dia 150 x lgth 400,15.000rpmTSSV 150 - 24000/12, 12 kW,dia 150 x lgth 400,24.000rpmTSSV 150 - 24000/12, 12 kW,dia 150 x lgth 400,24.000rpmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: 300 mmtable length: 0 mmtable width: mmtotal power requirement: 11 kWweight of the machine ca.: tdimensions of the machine ca.: mCut-Off Machine for Hard Materials, Coolant, Hand Lever11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 500 mmgrinding width: 200 mmworkpiece height: 250 mmtotal power requirement: 5,5 kWweight of the machine ca.: 2500 kgdimensions of the machine ca.: mJ U N GHorizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082_________________________________________________Grinding length max. 500 mmGrinding width max. 200 mmTable size 600 x 200 mmGrinding height under grinding wheel approx. 250 mmTable cross travel approx.. 230 mmTable slide cross stroke 0,2 - 8 mm/table strokeTable longitudinal travel max.. 550 mmTable speed longitudinal ...
max. grinding diameter: 320 mmgrinding length: 500 mmworkpiece length: 700 mmtotal power requirement: 10 kWweight of the machine ca.: 4 tdimensions of the machine ca.: mHeight of centres 220 mmDistance between centres / clamping length 750 / 500 mmTable size 290 x 1,600 mmIntermediate table 110 x 1,200 mmX / Y / Z axes 500 / 320 / 320 mmFeed speeds, X, Y & Z axes 0.005 - 5 m/minGrinding head swivelling, vertical axis, manual 200 °Grinding head tilting, manual +/- 90 °Speed range of R axis, approx. 0 - 50 rpmGrinding spindle speeds, infinitely variable, approx. 2,000 - 12,000 rpmWorkpiece holding fixture 50 ISOIndexing 1 - 999 °Leads 0.5 - 10,000 mmSpindle drive 4 kWTotal electrical load, approx. 10 kW - 380 V - 50 HzWeight, approx. 4,000 kgAccessories / Special Features SCHÜTTE CNC Continuous Path Control for 4 axes with SIEMENS/BOSCH components and SIEMENS SPS Control, Mod ...
grinding length: 600 mmgrinding width: 200 mmworkpiece height: mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3000 mm, 850 mm
Crankshaft Grinder BERCO RTM 425 Center height mm.425 Max swing mm.850 Center distance mm.3000 Wheel flanges Rests Machine dimensions mm.7100 x2350 Weight approx Kg 9000 Perfect working condition
CNC Milling Machine, Prvomajska AG-400 CNC, Used Equipment Manufacturer: Prvomajska Model: AG-400 CNC
Inv. Num. : 8331 Type: SKR 1200-NC Producer: REFORM Created: 1995 Parameters: Control system: Siemens SINUMERIK Max. workpiece diameter: 1200 mm Maximum length of the workpiece: 1000 mm Max. workpiece weight: 300 kg Max. speed: 1000 1/min Length: 2500 mm Width: 1500 mm Height: 1800 mm Weight: 4000 kg
Surface Grinding Machine Manufacturer: Geibel + Hotz Type: FS 40 AC Year of Make: 1998 Table length: 400 mm Table width: 200 mm Workpiece weight max. on the table: 150 kg Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Machine weight approx.: 1,050 kg Machine dimensions LxWxH: 1,800 x 1,200 x 2,250 mm
sanding belt measurements: 150x2000 mm: 1400/2800 U/minband speed: 16,5/33 m/stotal power requirement: 2,6/3,37 kWweight: 190 kgStandard features:- vibration-free running smoothness- Working height adjustable- S1 motors with 100% duty cycle- Surface and contact grinding is possible- Removable protective cover for surface grinding- Connecting piece for double suction- Built to CE standardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sanding belt measurements: 150x2000 mm: 1400/2800 U/minband speed: 16,5 / 33 m/stotal power requirement: 3,4/4,5 kWweight: 190 kgMaximum grinding of pipes is possible:at 90 degrees max. 150 mm Øat 60 degrees max. 127 mm Øat 45 degrees max. 100 mm Øat 30 degrees max. 70 mm ØThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
charge load: 620 Liter: 1.700 mmtank diameter / tank height: 1.550 / 600 mm: 450 mmmotor capacity: 4,5 / 7,5 kWmotor speeds:: 900 / 1.485 U/minvoltage: 400 Vtotal power requirement: 8,5 kWweight of the machine ca.: 1,6 tdimensions of the machine ca.: 2,00 x 1,70 x 1,50 mSoundproofing cover bracket: 3,30 x 0,60 x 0,40 mFinishing machine- Serial-No.: 36225 / 05- Machine ON: 6.469 h- Pneumatic separating flap- Timer- Pneumatic soundproof coverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Volume of work tank 200 l Usable volume 125 l Max. workpiece (diagonal) 170 mm Screening area 2190 cm² max. centrifugal force 49,000 N There are 2 lifts available!
