used Roll Grinding Machines for sale

Description: Serial Number: ZVX13170 Motor Type: M80 0.37 kW Voltage: 3F, 400 VAC, 50 Hz RPM: 950grinding spindle speed: 950 rpm, weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 480 x 660 x 1,200 mm

Farrel Rollgrinder 2 Technical Details Machine Type: Farrel K850 60x240IN Year of manufacture: 1964 Year of modernization: 2008 Year of Arrival at Plant: 2009 Dimensions Distance between Centers: 240" - 6096 mm Max. Working Diameter with New Stone: 58" - 1473.20 mm Max. Allowable Workpiece Weight: 80 Tons Abrasive Wheels Dimensions: 36 "x 4 "x 20" - 914.4 x 101.6 x 508 mm Min. Working Diameter: 482.6 mm Max. working diameter: 927.10 mm (927.10 in.) Stone Speeds: 50 - 1200 rpm Surface Speed: 30.3 - 58,2 m/s Drive Head Spindle Speed: 0 - 100 rpm Longitudinal Slide Movement Feed rate: 1 - 5900 mm/min Cooling Devices Emulsion capacity in the tank: 1500 lt CNC Control HCC/KP10

grinding diameter: 1400 mmgrinding length: 11030 mmswing diameter: mmgrinding diameter - min.: mmgrinding spindle speed: 300 - 1000 U/mindrive motor: 30/37 kWfeed: x-axis: 0.01 - 1000 mm/minz-axis: 1 - 4400 mmControl: FANUC 31i x-axis: 510 mmz-axis: 11250 mmdiameter / bore of grinding wheel: 760x100 / 915x100 mmworkpiece weight: 45 tworkpiece turning speeds: 2 - 40 U/mincentre distance: 15000 mmtotal power requirement: 150 kVAweight of the machine ca.: 85 tdimensions of the machine ca.: 19 x 5,3 mCNC roll grinding machine- CNC control FANUC 31i-A- crowning- magnetic separator- Coolant- Grinding wheels/flange- 2 steady rests- TailstockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,200 x 1,600 mm

Rogers 300 HYD Knife Roll Grinder Model: 300 HYD Size 102 Year of arrival at the plant: 1961 Space used by the machine: 7 x 2 x 1,8m Worktable dimensions: 2600 x 250,50 mm. Longitudinal table travel (stroke): 3000 mm. Magnetic system of the table: EML 15 - 115 Volts - 13 Amp - 1500 Watts. Longitudinal slide feed: 0 - 28 m/min. Cross travel without abrasive wheel: 200 mm. Cross travel with new abrasive wheel: 92 mm. Vertical Capacity: 200 mm. Abrasive wheel: Ring abrasive wheel, 26" outer dia., made up of 10 segments type 53 (S/G FLAT RS-801-B) of 6.1/2 "x 2 "x6". Each segment must indicate the maximum RPM for the ring. Abrasive wheel head speed: 560 Rpm. Cooling tank capacity: 259 liters

Roll grinder machine STANKO XC3 CHS 193 under power, working condition - min. grinding diameter 240 mm - max. grinding diameter 2000 mm - max. workpiece length 6700 mm - grinding wheel diameter 600 mm - workpiece diameter: 2000 mm

Roll grinding machine TOS BEV 100/6000 for refurbishment.

WALDRICH SEIGEN WST IV H80 X 12000 ROLL GRINDER YEAR: 1981 / INSTALLED 1982 MAXIMUM GRINDING DIAMETER: 78” ( 1981.2 mm) WITH 32” (812.8 mm) DIAMETER WHEEL MAX DIAMETER CAPABILITY: 2500mm DISTANCE BETWEEN CENTERS: 472.40” (12000mm) MAXIMUM WORKPIECE WEIGHT: 176000 lbs. (80t) WHEEL OD MAXIMUM: 32.00” WHEEL WIDTH MAXIMUM: 4.00” WHEEL ID: 12.00” WHEEL SPINDLE POWER: 27 - 59/59 HP WHEEL DRESSER: BED MOUNTED ROLL WHEELHEAD TRAVEL: 25.60” TABLE TRAVEL: (WHEEL HEAD TRAVEL) 488.40”( 12405 mm) TABLE SPEED: (WHEELHEAD SPEED) 157.5 in/min (4000 mm/min) WHEEL SPINDLE SPEED: 450 - 1800 RPM Infinitely Variable WORKHEAD POWER: 1.9 - 59/59 HP WORKHEAD SPEED: .5 - 300 RPM WAYS: CAST IRON FULL HYDROSTATIC SLUDGE CONVEYOR: NONE COOLANT: YES FILTRATION SYSTEM: COMBINATION 2 CARTRIDGE AND FABRIC FILTER WAY COVERS: METAL TELESCOPIC POWER 3PHASE / 50-60 Hz / 200 - 50 ...

grinding diameter: 1000 mmgrinding length: 4000 mmswing diameter: mmclamping length max.: 4000 mmgrinding spindle speed: 400 - 1200 U/mingrinding wheel peripheral speeds:: 45 m/sgrinding motor: 22 kWgrinding wheel size: 710 x 100 x 304,8 mmfaceplate turning speed range -stepless-: 3 - 70 U/mindrive capacity - workpiece: 4 kWfeed range - grinding spindle: 0,01 - 6000 mm/minworkpiece weight: 10 tControl: Fanuc 31i- B table (Z-axis): 4100 mmx-axis: 460 mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- CNC control Fanuc 31i - B- tailstock MT6- Steady rest dia 100- 610mm- Hydrostatic spindle guide- Crowning +/- 5mm- Coolant tank & paper filter- Magnetic separater- Measuring system.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 4000 mmgrinding length: 6000 mmswing diameter: mmclamping length max.: 6000 mmgrinding spindle speed: 420 - 1110 U/mingrinding wheel peripheral speeds:: 1800 m/mingrinding motor: 15 kWgrinding wheel size: 760 x 90 x 304,8 mmfaceplate turning speed range -stepless-: 3 - 30 U/mindrive capacity - workpiece: 15 kWfeed range - grinding spindle: - mm/minworkpiece weight: 15 + ttotal power requirement: - kWweight of the machine ca.: ca 30 tdimensions of the machine ca.: ca 13 x 2,6 mHeavy-duty roll grinding machine- workpiece drive- tailstock- coolant system- various steady rests- polishing motor- crowningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.