Manufacturer:
(Category: 101)
bore capacity in steel (diameter): 50 mmarm length: 1100 mmbore capacity in cast iron: 60 mmquill stroke: 300 mmtool taper: MK 5 speeds: 22 - 1000 U/minfeeds: ja mm/UBoring motor: 4,5 kwtotal power requirement: 7,5 kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: 2,1 x 0,9 x 2,85 mRadial drilling machine- Box table 750 x 750 x 500 mm- Coolant system- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 760 mmy-travel: 550 mmz-travel: 300 mmControl: RMS6V3.15 tool change unit: 25-fach tool taper: HSK E40 turning speeds: 42.000 U/mintable-size: 860 x 550 mmtable load: 800 kgtotal power requirement: 14 kWweight of the machine ca.: 5200 kgdimensions of the machine ca.: 2,5 x 2,1 x 2,55 m3-axis high-speed machining centre, Roeders RFM760, year of manufacture 2000, installation in 2001Key specifications:Roeders RFM760 high-speed machining centre with accessories (tool holders, tool shrink-fitter, etc.).The machine is fully operational, well-maintained, serviced and powered up (battery maintenance).• Spindle: Newly fitted in December 2022, in use until March 2023 – Estimated running time approx. 75 hours (de-registered by the company in March 2023)• Control system: Röders, software: RMS6V3.15 (211)• Operating system: Windows NT• Complete s ...
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve adapter sleeve -Type: MK3/2 -Dimensions: Ø 24/195 mm -Weight: 0.5 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK4/3 -Dimensions: Ø 32/140 mm -Weight: 0.4 kg
Machine reamers, reamer, reaming tool, locating knife cutting set -Mounted reamers: Machine reamers, 2 pieces -Type: Ø 79.5 mm Mounting 29/33 mm -Type: Ø 80 mm Mounting 37/40 mm -Submission/Price: complete -Transport dimensions: 160/80/H90 mm -Total weight: 3.8 kg
Key data: 560 mm, 510 mm, 510 mm
Inv. Num. : 9279 Type: HTC 400 Producer: MAZAK Created: 1998 Parameters: Control System: Mazatrol Work table length: 400 mm Work table width: 400 mm Maximum table load (even): 300 kg Spindle drive power: 5.5 kW Maximum spindle speed: 10000 1/min X-axis travel: 560 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Number of stacking positions: 24 pieces
Vertical machining centre HYUNDAI SPT-V550D - corse 570x410x580 mm, CNC SIEMENS 810D - rotopallet, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 650x410 mm (2), Longitudinal travel x axis: 570 mm, Cross travel y axis: 410 mm, Vertical travel z axis: 580 mm, Working feed x-y-z axes: 0 - 36.000 mm/1, Rapid feed x-y-z axes: 36 mt/1, Spindle taper type: 40 DIN-BT, Automatic tools change nr.: 24, Spindle speed: 0- 10.000 rpm, Spindle motor power: 18,5 Kw, Cnc: SIEMENS 810D, Approx net weight: 6.000 Kg, accessories: coolant thrugh spindle
: neu : ca. 8 Wochen ab Auftragse : Spanien : 12910 €: 247.87 €: 40 mm: MK 4 : 350 mm: 132-194-277-319-466-666-8 U/min: 2.2 kW: M33 : 755 mm: 480 mm: 2280 mm: 490 kg: 0,1 - 0,2 - 0,3 mm/U: 150 mm: 80 - 880 mm: 1225 mm: 480 x 480 mm: 175 mmAutomatic feed with mechanical clutchGeared driveHardened and ground high quality steel gearsSpeed plate and selecting levers on head front.Depth scale and adjustable depth stopAutomatic tool ejectorEmergency STOP push buttonSpindle reversing switchElectric equipment integrated on machine’s headMachined base with coolant tankWorklightMGI: Rotating and tilting table for model 40Safety drill guard with microswitchCE markALTERNATIVE:VERSION BX.40MIT ELEKTROMAGNETIC CLUTCH PRICE ON REQUESTOPTIONS (PRICES ON REQUEST): Electronic speed variato with speed digital reader(VE+TAK) A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746F) 333-1066 G) 440-1413 ...
x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmControl: total power requirement: --- kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmControl: total power requirement: --- kWweight of the machine ca.: 6,8 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2600 mmy-travel: 1100 mmz-travel: 920 mmtool magazin:: 30 internal coolant system feed: 40 Bar tool taper: SK50 total power requirement: --- kWweight of the machine ca.: 26,1 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
POS POSmill CE 1000Year of manuf. : 2022 Control : Heidenhain TNC 640 Speed : 10000 rpmMovement X/Y/Z : 1000/600/600 mmTool holder : SK40 ____________Description:Spindle:Technology:Belt driveSpeed:10,000 rpmTool holder:SK40Media feed-through:Blown air + cooling lubricantWorking table:Clamping surface:1,200 x 600 mmTableloading (max.):750 kgGeneral:Tool magazine:40 stationsFeatures/Accessories:Coolant Management:IKZ system with filter and high pressure, 20 barChip Management:Chip conveyorWorkpiece Measurement:25.50-HDRTool Measurement:Pick UP wireless 35.40 TSPosition Measurement System:Heidenhain linear measurement system (direct) X/Y/ZSetup Mode:Electronic handwheel
A vertical machining center Avia is available. Travel X/Y/Z: 650mm/540mm/620mm, Table dimensions X/Y: 800mm/540mm, Max. table load: 700kg, Speed: 10000rpm, Tool holder: SK40, Tool stations: 24, Rapid traverse: 25m/min, Positioning accuracy: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2200mm/2600mm/2850mm, Weight: approx. 4200kg, Control: Heidenhain iTNC 530. Including 3D probe, Through-spindle coolant and chip conveyor. Documentation available. An on-site inspection is possible.
Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex drill bits, drill bit holders -Manufacturer: Sassex, spiral drill bits, 33 pieces -Type: E16 / E17 Ø 40 to 128 mm -Submission/Price: complete -Mounting bracket: available in stock for an additional charge -Transport dimensions: 530/340/H50 mm -Weight: 15 kg
Control Heidenhain iTNC 530 Travel X/Y/Z: 2200 x 560 x 720 mm Spindle speed 18,000 min-1 Clamping area 2600 x 600 mm Max. table load 2200 kg Swivel head IKZ 25 bar Tool magazine for 30 Wkz, SK 40 Choice of C- or A-axis Measuring Probe Heidenhain TS 640 Chip conveyor Paper Belt Filter
With CNC control, HEIDENHAIN, type: TNC 155, with touch probe Travel: x=700 y=550 z=550mm. Size table area 1000 x 490 mm Accessories: Chip conveyor / coolant system / tool holders SK3. Machine is presentably ready for operation under power. Milling machine with protective cabin. The milling machine can be operated at any time without protective cladding and is then "quite handy". Dimensions of milling machine: , width is 1.6m, depth is 2.3m, height is 2.15m and cabinet width is 1.5m
General Manufacturer: Alzmetall Type: AC 32/AS Year of Make: 1991 Performance Drilling capacity St 60: D32 mm, v=20 m/min, s=0.27 mm/rev Drilling capacity GG 20: D40 mm, v=20 m/min, s=0.27 mm/rev Drilling capacity St 60: D45 mm, v=20 m/min, s=0.15 mm/rev Tapping capacity St 60: M 24 Threading capacity GG 20: M 30 Drive Main drive: 3 kW – 1,500 rpm Main spindle speed range: 55 – 5,000 rpm Feed Feed drive: automatic, infinitely variable Feed speed: 1 – 3,000 mm/min Rapid traverse: 3 m/min Spindle Tool holder: MK4 Spindle head diameter: 46 mm Quill stroke: 180 mm Projection: 322 mm Column diameter: 145 mm Table Table clamping area: 415 mm x 508 mm Number of T-slots x width x spacing: 5 x 14 x 100 Table stroke: 663 mm Distance from spindle table max: 663 mm Spindle-machined base plate distance: 1,083 mm Dimensions and weight Dimensions: 720 mm ...
CNC Machining Center Hedelius T7 – 2600 1 R incl. standby magazine Control: iTNC 640 Year of Make: 2017 Internal machine no. 68 Travels: X-axis F/H 2,600 / 2,030 mm Y-axis 750 mm Z-axis F/H 695 / 800 mm Swivel range: -98° to +98° Pendulum operation: 760 / 1,300 mm Total clamping area 3,080 x 750 mm Table load: approx. 2,500 kg Integrated rotary table Ø 750 mm Interference circle diameter 1,100 mm Mount: SK 40 Tool magazine: 33-fold Standby magazine: 180 pieces Celox motor spindle: 50 - 12,000 rpm Power: 29kW Equipment: - KinematicsOpt TNC640 - Handheld control unit HR 510 - Compressed air nozzle on the spindle head - Internal compressed air supply - Inclined bed coolant system 900l - Internal coolant supply (IKZ) 25 bar - Infrared Receiver M&H - 3D Infrared Probe M&H 25.50 - Exhaust air filter - Blow-off guns - Rinsing guns
vertical machining center, year 2009, CNC (controllo Haas CNC, programmazione G-code ISO). Used machine in good condition. More info & price on IndustrialBuyer.
Offered is a Fehlmann CNC universal milling machine. Travel X/Y/Z/W: 700mm/315mm/178mm/495mm, feed rate X/Y: 9m/min, feed rate Z/W: 4m/min, rapid traverse X/Y: 9m/min, rapid traverse Z: 4m/min, table dimensions X/Y: 1130mm/350mm, max. table load: 250kg, spindle taper: SK30, tool positions: 32, max. speed: 9200rpm, spindle power: 5kW, drilling capacity in steel: 30mm, reach: 370mm, distance table-spindle: 620mm, control: Heidenhain. Weight: approx. 3400kg. Inspection possible by appointment.
A CNC machining center by Hurco requiring repair is offered, including spindle through-coolant and a chip conveyor. Travels X/Y/Z: 1625mm/860mm/760mm, operating hours: approx. 39025h, max. spindle speed: 8000rpm, tool stations: 40, tool holder: HSK40, cover of the Z-axis is defective. Inspection possible by appointment.
A repair-required Hurco vertical 3-axis machining center is offered, including spindle through-coolant, 3D tool and a chip conveyor. Travels X/Y/Z: 1270mm/660mm/610mm, rapid traverse: 30m/min, feed rate: 15m/min, operating hours: approx. 47646h, max. spindle speed: 12000rpm, tool positions: 40, tool holder: HSK40, control system: Winmax. Bearing damage in the X-axis. A new spindle was installed in 2018. Inspection possible by appointment.
A Hurco CNC vertical machining center is available. Spindle power: 15kW, torque: 238Nm, travel X/Y/Z: 1060mm/510mm/610mm, table dimensions X/Y: 1020mm/610mm, tool holder: SK40, tool stations: 24, spindle speed: 10000rpm. Machine dimensions X/Y/Z: approx. 2800mm/3050mm/2800mm, weight: approx. 5900kg, control system: Ultimax. An on-site inspection is possible.
x-travel: 500 mmy-travel: 500 mmz-travel: 500 mmtotal power requirement: kWweight of the machine ca.: 3800 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 1.050 mmz-travel: 800 mmcontrol: 840D solutionline SiemensMain spindle:: Speed Mainspindle: max. 10.000 min/-1power capacity - main spindel: 44 kWmax. Torque: 288 Nmtool taper: HSK-A 100 DIN 69893Swivel range: -10° / +180 °NC-Rotary table:: table surface area: dia. 900 x 700 mmmax. table load: 1.500 kgdistance spindlenose - table horizontal: 50 - 850 mmdistance spindlenose - table vertical: 150 - 950 mmtable speed: 35 min/-1rotatable: C: 360 °Tool-Presetter:: number of toolpositions: 120 pos.tool taper: HSK-A 100 max. tool diameter: 110 mmmax. tool-dia with free toolbox: 230 mmmax. tool length: 550 mmmax. tool weight: 30 kgtool changing time: 5,4 secfeeds:: rapid traverse ( X / Y / Z ): 60 m/minRapid B-Axis: 23 min/-1Accelaration: 7 / 6,5 / 6,5 m/s²Feed force ( X / Y / Z ): 13 / 13 / 9 kNweight of the machine ca.: 13,0 tdimensions of the machine ca.: 6,0 ...
DECKEL MAHO DMU 160P duoBLOCK CNC Machining Center TECHNICAL FEATURES: Year: 2008 CNC Type: HEIDENHAIN TNC 530 Number of continuous axes: 5 X-axis stroke: 1600 [mm] Y-axis travel: 1250 [mm] Z-axis travel: 1000 [mm] X, Y and Z axis travel speed: 15000 [mm/min] Fast travel speed X, Y and Z: 60000 [mm/min] Table dimensions: Ø1500 x 1250 [mm] Maximum weight Tabletop Allowable: 4000 [Kg] Pin attachment: SK 40 (DIN 69871) Minimum speed. Spindle: 20 [rpm] Maximum speed Spindle: 12000 [rpm] Number of tool magazine stations: 60 Machine weight: 35000 [Kg] EQUIPMENT INCLUDED: x1 HEIDENHAIN workpiece probe x1 Laser Gauge x3 HEIDENHAIN measuring rulers on the X, Y and Z axes x1 Watering Center Spindle x1 Chip Conveyor x1 Paper Filtration Unit More information on request.
Key data: 762 mm, 508 mm, 508 mm
Inv. Num. : 9268 Type: VF-2SSYT Producer: HAAS Created: 2021 Parameters: Switch-on hours: 13517 h Operating hours: 6225 h Work table length: 914 mm Work table width: 457 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 508 mm Travel Z-axis: 508 mm Spindle power: 22.4 kW Cone: SK 40 Number of Stacking Positions: 31 pieces Machine weight: 3450 kg Equipment: Chip conveyor Renishaw tool probe Renishaw workpiece probe High-pressure tool cooling through the spindle center Extraction system from the machine cover
scm Busellato cnc machining center with console tables Cantilever center with front open beam Drilling unit with 19 tools for vertical and horizontal drilling and in the X direction of the sawing unit Rear and front stops on the consoles Safety system via bumper (without carpets and barriers) Linear tool changer with 11 places on the machine stand Linear tool changer with 14 places on the cantilever (boom) Processing field X Y Z 3115 x 1320 x 180 Throughput in Z 1880 mm JET ELITE P4/13 CE VERSION V 400/50 mobile control element with 7
Axles X 160 to infinity Y to max 1300 mm Z up to max 60 mm 6-fold tool changer
The C400 has a robust machine stand, integrated control cabinet and 2200 sliding slides The tables are cast iron and have been finely milled and ground via cnc machining centers Planing width 400 mm Dressing table length 1800 mm Planing shaft 70 mm umd planing shaft 5700 rpm 3 Knife strip planer shaft max. thickness when planing 220 mm min. density 4 mm Carriage 2200 mm Milling machine D 30 mm rpm: 2000-3100-4400-7000 Engine V400/50 3 kw / hp Amplified motor possible 4 kw/ 5.5 hp (not necessary) Weight approx. 800 kg Machine with Hammer Austria
