boring mills and machining centers used for sale (3,112)

Offered is a special drilling and thread-cutting machine Frielingsdorf, equipped with four Ayen drilling units. Machining directions: 3×side, 1×top, setup: rotary indexing table, speed of side drilling units: 960rpm, speed of drilling unit from above: 1400rpm, motor power per drilling unit: approx. 0.73kW, control: conventional. Machine dimensions X/Y/Z: approx. 2600mm, 1500mm, 2600mm, footprint without side lines/containers: approx. 3.5m², weight: approx. 1500kg. Inspection possible by arrangement.

bore capacity in steel (diameter): 50 mmarm length: 1250 mmworkpiece height max.: mmtotal power requirement: 4 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 25 -1500 U/min Stufenlosbore capacity in steel (diameter): 23 mmbore stroke: 120 mmtable clamping surface:: 1250 x 340 mmtaper MK: MK3 total power requirement: 2 kWweight of the machine ca.: 0,4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Brother B-00 Travel X/Y/Z: 700 x 400 x 300 mm Spindle speed: 10,000 min-1 Tool magazine for 21 Wkz., BT 30 4. Axis W&R 3D Probes OP 40 Manual handwheel Chip conveyor Chip wagon Vacuum unit Various clamping devices and tool holders

Key data: 1270 mm, 610 mm, 720 mm

Inv. Num. : 9302 Type: MCV 1270 POWER Producer: MAS Created: 2002 Parameters: Control system: Heidenhain iTNC 530 Operating hours: 1000 h Tool magazine: 24 pieces Maximum vertical spindle speed: 10000 1/min X-axis travel: 1270 mm Y-axis travel: 610 mm Travel distances Z-axis: 720 mm Cone: ISO 50 Machine height: 3300 mm Machine length: 5000 mm Machine width: 3600 mm Machine weight: 11000 kg Equipment: Technical documentation Workpiece probes Tool probe IKZ (15 bar) 10/2020: Machine completely cleaned and repaired Air hoses of the machine replaced Tool/workpiece cooling hoses replaced Piston rod of tool magazine sealed Air/oil clamping distributor sealed Piston seal of tool clamping sealed at the top of the spindle Automatic lubrication of the machine tested 8/2022: Main power module from SIEMENS completely repaired AC/DC converte ...

Key data: 750 mm, 500 mm, 500 mm

Inv. Num. : 9301 Type: MCV 750 SPEED Producer: MAS Created: 2009 Parameters: Control system: Heidenhain TNC 530 Work table length: 1000 mm Work table width: 640 mm Maximum table load (uniform): 650 kg Tool magazine: 20 pieces Maximum vertical spindle speed: 12000 1/min X-axis travel: 750 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Machine height: 2700 mm Machine length: 3700 mm Machine width: 2200 mm Machine weight: 5350 kg Equipment: 4. Axis Workpiece Probe Tool probe 2024: Replacement of the X and Y axes (including new screws)

Key data: 500 mm, 400 mm, 400 mm

Vertical machining center Manufacturer: Fehlmann ( Switzerland ) Type: Picomax 56 TOP Machine No.: 14212322 Year of Make: 2012 Control: Heidenhain 620 Axles: 3 Travels X: 500 mm Y: 400 mm Z: 400 mm Tool changer: 30 places Speed: 12,000 rpm Drive power: 100%ED / 40%ED 7.1 KW / 9.5 KW Weight approx.: 3300 Kg - Probe Heidenhain - Pushbutton for tool measurement Heidenhain - Various tool holders - Mint condition - Program run: 1980 hrs. Errors and prior sale excepted.

Key data: 1600 mm, 1250 mm, 1000 mm

Vertical machining center Manufacturer: DMG Type: DMU 160 P duoBLOCK Year of Make: 2007 Control: Heidenhain ITNC 530 Axes: 5-axis simultaneous Travels X: 1600 mm Y: 1250 mm Z: 1000 mm Tool changer: 60 tool positions Speed: 18,000 rpm - HSK 63 - Probes - Tool measurement Blum Laser - Coolant tank 980 litres - IKZ 40 Bar - Chip conveyors - Electronic handwheel - Operating mode 4 - Preparation of 3-D Quickset (software) - Universal milling head with controlled A-axis Machine from Space Institute. Excellent condition. Errors and prior sale excepted.

Used Drilling and Milling Machine Manufacturer: PAMA FT 180 A YOC 1982 Travel distances: X = 12000 mm Y = 4500 mm Z = 1700mm approx. Control: Siemens Sinumeric840 Tool changer: 60 times 3 pcs PAMA heads. Drills, milling machines, etc. Without table Plates are included. From the foundation.

Boring mill table used. Table load: 40 tons. Table dimensions: 2500 x 3500 mm Table displacement: 1600 mm Condition: Good. Can be demonstrated

Key data: 1300 mm, 635 mm, 610 mm

Inv. Num. : 9296 Type: MCV-1300iS Producer: Leadwell Created: 2015 Parameters: Control System: FANUC Series Oi-MD Hours: 7088 h Work table length: 1420 mm Work table width: 610 mm Maximum table load (even): 1000 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 1300 mm Y-axis travel: 635 mm Travel travel Z-axis: 610 mm Cone: ISO 50 Number of all tools: 24 pieces Machine height: 2721 mm Machine length: 3840 mm Machine width: 2200 mm Machine weight: 7000 kg Equipment: 4. Axis Workpiece probes

Drilling Ø: 28/35 mm Spindle holder: MK 3 Projection: 293 mm Table size: 400 x 400 mm Table swivel on round column and height-adjustable via hand crank and rack Large distance between table and drill quill: 630 mm Quill stroke: 180 mm Spindle speeds in 4 groups adjustable: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.5 kW Weight: 340 kg Space requirement: 600 x 920 x 1880 mm

Drilling Ø in steel/GG 20: 40/55 mm Spindle holder: MK 4 Projection: 345 mm Table size: 450 x 600 mm Distance between table and drill quill: 785 mm Quill stroke: 180 mm Spindle speeds in 4 groups by pole-switching. Engine and manual transmission as well as infinitely variable control: 160 - 1540 rpm 4 automatic feeds: 0.09; 0,12; 0.18 and 0.22 mm/rev Drive motor: 380 V, 2.6/3.2 kW Weight: 640 kg Space requirement: 700 x 1150 x 2000 mm

5-axis machining centre with tool changer for aluminium or PVC profiles Max. machining length: 18,000 mm Y-axis travel: 1150 mm Travel Z-axis: 715 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Many tool holders, including angle head and saw blade Saw blade diameter: 500 mm Minimum quantity spraying Autonomous tensioner displacement 20 pneumatic material tensioners Pendulum operation through two light barrier areas Label Printers Barcode scanner Chip conveyor belt Suction Manual control panel Spindle in mint condition (pull-in force is just under 16 kN) Loading is included in the price Weight: approx. 14,000 kg

vertical machining center, year 1999, CNC 18-M. Used machine in good condition. More info & price on IndustrialBuyer.

x-travel: 760 mmy-travel: 460 mmz-travel: 460 mmcontrol: TNC 620 HeidenhainMain spindle:: turning speed range - main spindle: max. 12.000 min/-1power capacity - main spindel: 14 / 10 kWTorque: 89 / 63,7 Nmtool taper: SK 40 work table:: table surface area: 900 x 410 mmmax. table load: 350 kgT-slots: 4x Tool-Presetter:: number of toolpositions: 24 pos.max. tool diameter: 130 mmmax. tool length: 200 mmmax. tool weight: 8,0 kgfeeds:: rapid traverse ( X / Y / Z ): 36 m/mintotal power requirement: 20 kVAweight of the machine ca.: 3,3 tdimensions of the machine ca.: 3,0 x 2,5 x 2,9 mDocuments: digital Chip-Tray: Automatic Tool Changer: Coolantsystem: interface 4. axis: work light: test probe: Blum TC 50 elektr. hand wheel: integriert / integratedTailstock: TTS-125 indexing attachment: CNC Machiningcenter VerticalSPINNER - VC 750The data for this ad was created with ModulMWS - the soft ...

Drilling Ø: 28/35 mm Spindle holder: MK 3 Projection: 293 mm Table size: 300 x 440 x 500 mm Table swivel on round column and height-adjustable via hand crank and rack Large distance between table and drill quill: 630 mm Quill stroke: 180 mm Spindle speeds adjustable in 4 groups: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.3 kW Weight: 340 kg Space requirement: 1100 x 900 x 1880 mm