boring mills and machining centers used for sale (3,224)

The machine is in good technical condition; testing is possible by prior arrangement. Fully equipped, with tooling and accessories valued at approx. 1 million. X-axis travel: 1050 mm; Y-axis travel: 900 mm; Z-axis travel: 600 mm. Control system: Heidenhain TNC 640. Max. spindle speed: 18,000 rpm. Table clamping surface: 900 x 750 mm. Tool positions: 42. Tool holder: HSK 63A. Max. tool diameter: 80 (125) mm. Max. tool length: 225 mm. Max. tool weight: 8 kg. T-slots – width: 18 mm; spacing: 100 mm. Center bore: 32 mm. Rotation range: 360°. Tilt range: +/- 115°. Max. table load: 1500 kg. Rapid traverse (X/Y/Z): 35/35/35 m/min. Operating hours: approx. 8,500 h. Spindle hours: approx. 2,500 h. Machine weight: approx. 15 t.

Two Willemin-Macodel W 408 and four Willemin-Macodel W 408S are available, year of manufacture W 408: 1997, 2002, year of manufacture W 408S: 2005, 2006, 2007, 2008, an on-site inspection is possible.

Number of axes: 3, control: FANUC, connected load: 10kVA, weight: 3.7t, an on-site inspection is possible.

Controls: EIP, voltage: 230V, connected load: 3kVA, with CE marking. An on-site inspection is possible.

A Mikron CNC universal machining center in need of repair is offered. Operating voltage: 400V, frequency: 50Hz, rated current: 40A, control voltage: 24V DC, control: Heidenhain TNC 426, weight: approx. 5800kg. The tool changer is defective and the hydraulic accumulator is empty or defective. The machine has been used in production in single-shift operation with these limitations in recent years. The tools were changed manually, otherwise the machine can be operated. An on-site inspection is possible.

5 adjustable drilling speeds by rerouting the v-belt. Drill chuck 13 mm with key. Auction-ID: A1-48994-38

x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmControl: total power requirement: --- kWweight of the machine ca.: 6,8 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 36.0 mmbore capacity in cast iron: 45.0 mmthroat: 300 mmbore stroke: 160 mm: 4 speeds: 65 - 2000 U/mincolumn diameter: 145 mmtable-size: 615 x 460 mmfeed: 0.1 / 0.2 / 0.3 mm/Utotal power requirement: 1.75 / 2.5 kWweight: 440 kgdimensions: 1200 x 800 x 2300 mm Current list price: approx. 18.000 euros Special price available upon request Features:- Robust column drill press (V-belt drive)- Electromagnetic feed clutch = spindle feed with overload protection and electric cross-handle control- mushroom-head pushbutton (latching) for EMERGENCY STOP located on the front panel- continuously variable speed control- clockwise rotation of the drill spindle- Pole-reversible drive motor - Infinitely adjustable drilling depth stop - Work table with 2 T-slot - height-adjustable- Separate coolant system, with reservoir - Operating instructions in GermanThe data for thi ...

A - T-slot size: approx. 21.5mm, B-35, thread M20 16 T-slot nuts 20 pcs threaded rods M20, L-120 – 400mm 3 x 2 pcs clamping claws 4 nuts long, 6 nuts, washers 2 blocks for adjustment with adjustment screw 4 blocks 80 x 60 x40mm ( underlay ) Price : Euro 400,- ex works ! B - T-slot size : approx. 17, thread M16 20 T-slot nuts approx. 17, B-28-32mm 6 clamping claws 4 pcs. Threaded rods M16 – L110 AMF 12 winding rods L to 260mm 16 Pcs Nuts, Weight approx. 24Kg Price: Euro 150,- C - Clamping Set Clamping Clamps, Groove Width approx. 21.5mm W-36mm, M16 2 pcs. 0 – 25 – 70 , M16 with clamping claws 2 pcs. 100 – 220 , M16 with clamping p. 2 pcs. 200 – 320, M16 WITH clamping pr. 2 threaded rods M20 L-310 2 threaded rods M20 L 150 1 adjustment block, 4 nuts, 6 nuts Weight: approx. 30kg , Price : 360,- ex works ! D- groove width : approx. 28mm ,  ...

CNC machining center FEHLMANN Picomax 56 TOP TECHNICAL FEATURES: Year: 2015 CNC Type: HEIDENHAIN TNC 620 X-axis travel: 500 [mm] Y-axis travel: 400 [mm] Z-axis travel: 400 [mm] X, Y and Z axis travel speed: 20000 [mm/min] Min. Distance. Spindle/Table: 120 [mm] Max. distance spindle/table: 520 [mm] Table dimensions: 908 x 480 [mm] Max. weight permissible on the table: 250 [Kg] Pin attachment: ISO 30 Maximum speed Spindle: 12000 [rpm] Number of tool magazine stations: 20 Max. Length of Tool: 240 [mm] Maximum weight per tool: 3 [Kg] Max. tool diameter: 130 [mm] Tool Change Time: 3 [sec] Time between cuts: 8 [sec] Number of cutting hours: 1463 [h] Rated Current: 25 [A] Supply voltage: 400 [V] Machine weight: 3250 [Kg] EQUIPMENT INCLUDED: HEIDENHAIN measuring rulers on the X, Y and Z axes x1 FRIBOSA Switzerland precision clamping vice x1 RENISHAW pa ...

Key data: 1760 mm, 600 mm, 800 mm

Control: Name: Heidenhain iTNC 530 Technical data: • Spindle: 10000 rpm • Swivel head: -90° to +90° • 22-fold tool changer • Table size: 2380 mm x 600 mm • Internal coolant supply (IKZ) • Chip conveyor • Coolant system Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

CNC Machining Center Hedelius Forte 65 Single 1320 Control: Heidenhain TNC 640 Year of Make: 2019 Availability: in stock Internal machine no. 74 Travels: X-axis 1,320 mm Y-axis 650 mm Z-axis 600 mm Total clamping area 1,500 x 650 mm Table load: approx. 1,200 kg Mount: HSK 63 Tool magazine: 65 compartment Spindle speed: 18,000 rpm Drive power: 35 kW Facilities - Inclined bed coolant system 900 l - IKZ 25 bar - Chip conveyors - 1x Rinsing gun - Electronic handwheel

CNC Machining Center Hedelius Forte 7-2600 Magnum Control: Heidenhain TNC 640 Year of Make: 2020 Availability: in stock Internal machine no. 73 Travels: X-axis 2,600 mm Y-axis 750 mm Z-axis 800 mm Pendulum operation: 2 x 1,000 mm Total clamping surface 2x 1,490 x 750 mm Table load: approx. 2,500 kg Mount: HSK 63 Tool magazine: 50 compartments Spindle speed: 50 - 18,000 rpm Drive power: 35 kW Facilities - Inclined bed coolant system 900 l - Chip conveyors - 2x dishwashing gun - Electronic handwheel - Partition wall prepared - High pressure pump 60bar - 0-point clamping platens - Vises and tools as required - Prepared for work space partition wall

Key data: 4000 mm, 1200 mm, 800 mm

Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 20-7000 rpm • A-axis: - 181° to + 10° • 60-fold tool changer • SK50 interface • NC rotary table: Ø 1500 mm • Table size: 4150 mm x 1500 mm • Internal coolant supply (IKZ) • Chip conveyor • Signal light Machine has approx. 28,000 program running hours Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

BAZ Hermle U630T BJ 1998

Column Drill

vertical machining center, year 1998. Used machine in good condition. More info & price on IndustrialBuyer.

vertical machining center, year 2001. Used machine in good condition. More info & price on IndustrialBuyer.

CONTROLS  CNC controls FANUC 18 MB WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 4   .. among of them simultaneous CNC axes: 3   X-axis travel: 900 mm  Y-axis travel: 800 mm  Z-axis travel: 980 mm  rotating range B-axis from: 0 °  rotating range B-axis up to: 360 °TABLE  table surface (left-right): 630 mm  table surface (front-back): 630 mm  workpiece load (max): 1200 kgSPINDLE / HEAD  spindle type: horizontal   spindle revolutions (max): 10000 /minAXIS DRIVES  rapid traverse: 50000 mm/minTOOL MAGAZINE  number of positions: 140 AUTOMATIC WORKLOAD EQUIPMENT  store type: table changer   number of store positions: 2 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 19000 kgATTACHMENTS  chip conveyor: yes   coolant unit: yes   band filtration unit: yes   ...

CONTROLS  CNC controls MORI SEIKI MSG-501 WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 4   X-axis travel: 1300 mm  Y-axis travel: 1200 mm  Z-axis travel: 1100 mmTABLE  table surface (left-right): 800 mm  table surface (front-back): 800 mm  workpiece load (max): 2000 kgSPINDLE / HEAD  spindle revolutions (max): 0 /min  spindle revolutions (max): 6000 /min  tool fixture: ISO BT 50 AXIS DRIVES  rapid traverse: 42000 mm/minTOOL MAGAZINE  number of positions: 60 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 7400 mm  space requirements -front/back-: 4300 mm  total height: 3750 mm  total weight approx.: 23500 kgATTACHMENTS  chip conveyor: yes   coolant unit: yes   band filtration unit: yes   through spindle coolant attachment: yes   closed cab ...

Complete and in working order Auction-ID: A3-46156-16483

x-travel: 1020 mmy-travel: 610 mmz-travel: 610 mmcontrol: Heidenhain iTNC530 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1020 mmy-travel: 610 mmz-travel: 610 mmcontrol: Heidenhain iTNC530 total power requirement: kWweight of the machine ca.: 7390 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: 50 - 365 mmbore depth: 24500 mmswing diameter: 1600 mmfull boring: 50 - 310 mmbed width: 1200 mmfaceplate diameter: 1300 mmworkpiece weight max.: 25 - 80 tdiameter of main spindle in front bearing: 400 mmHeight of centres: 800 mmturning speed range: 0 - 315 U/minmain drive DC: 44 kWdrill diameter: 500 mmfeeds: 0,5 - 500 mm/minworkpiece length - max.: 10.000 mmwork piece power: 74 kWturning speed range - drilling: 120-600-2400 U/minhollow spindle diameter: 460 mmturning speed range: 30-600 U/minControl: total power requirement: ca. 200 kVAweight of the machine ca.: - tdimensions of the machine ca.: - mmodernised in 2002 and 2011operates using the BTA process-- 2 roller mandrels 100–650 mm- 2 roller stands 650–1200 mm- Coolant systemRange of diameters and length of drilling on one side:.D 35 – 45 mm L = 4000 mmD 46 – 65 mm L = 6000 mmD 66 – 85 mm ...

core drilling diameter max.: 50 - 365 mmbore depth: 24500 mmswing diameter: 1600 mmfull boring: 50 - 310 mmbed width: 1200 mmfaceplate diameter: 1300 mmworkpiece weight max.: 25 - 80 tdiameter of main spindle in front bearing: 400 mmHeight of centres: 800 mmturning speed range: 0 - 315 U/minmain drive DC: 44 kWdrill diameter: 500 mmfeeds: 0,5 - 500 mm/minworkpiece length - max.: 10.000 mmwork piece power: 74 kWturning speed range - drilling: 120-600-2400 U/minhollow spindle diameter: 460 mmturning speed range: 30-600 U/minControl: total power requirement: ca. 200 kVAweight of the machine ca.: - tdimensions of the machine ca.: - mmodernised in 2004operates using the BTA process-- 2 roller mandrels 100–650 mm- 2 roller stands 650–1200 mm- Coolant systemRange of diameters and length of drilling on one side:.D 35 – 45 mm L = 4000 mmD 46 – 65 mm L = 6000 mmD 66 – 85 mm L = 80 ...

Stored in working condition Auction-ID: A3-46156-17119

Manufacturer: AKIRA SEIKI Model: SV 760 Year: 2021 Condition: Used Stock number: 9500 Control system: HEIDENHAIN Work table length: 910 mm Work table width: 400 mm Maximum table load (even): 960 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 760 mm Y-axis travel: 445 mm Z-axis travel: 520 mm Machine weight: 4500 kg

Manufacturer: Pinnacle Model: VMC 2000S Year: 2015 Condition: Used Stock number: 9499 Control system: HEIDENHAIN Work table length: 2200 mm Work table width: 850 mm Maximum vertical spindle speed: 8000 1/min X-axis travel: 2000 mm Y-axis travel: 900 mm Travel Z axis: 850 mm Machine weight: 16000 kg

Manufacturer: AWEA Model No.: A+1600 Year: 2011 Condition: Used Stock No: 9497 Control System: FANUC Series 18i-MB Switch-on hours: 1727 h Operating hours: 374 h Work table length: 1700 mm Work table width: 800 mm Maximum table load (uniform): 2000 kg Spindle drive power: 20 kW Maximum vertical spindle speed: 6000 1/min X-axis travel: 1600 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Cone: BT 50 Number of all tools: 24 pieces Machine weight: 15000 kg

Manufacturer: MORI SEIKI Model No.: SH 633 Year: 1999 Condition: Used Stock number: 9496 Control system: MORI SEIKI MSG-502 Work table length: 700 mm Work table width: 500 mm Maximum table load (uniform): 1200 kg Maximum spindle speed: 10000 1/min X-axis travel: 840 mm Y-axis travel: 760 mm Travel distances Z-axis: 840 mm Machine weight: 18500 kg