sheet metal working used for sale (3,297)

3000 x 1500mm 4000w Bytrans Extended

Qty. 1 Second-hand aluminium strip production plant Entry Material: Aluminium Scrap – HD666, AA5050, 2.5-3.0% Mg Final product: Aluminium strip (can stock) Width: 220 mm Thickness: 0.15 – 1.0 mm Mfc.: De Winter, Thermcon, Fata Hunter, Fröhling, Nederman, Burghardt & Schmidt, Siemens Built: 1984, 1999, 2000, 2002, 2014, 2015 Scope of supply: Melting Furnace Tilting Casting Furnace Block Caster 5 Stand Hot Rolling Mill 6 Stand Cold Rolling Mill Hot Gas Filter Slitter Welding Machine Treatment Furnace Quenching Unit Shear

Qty. 1 Second-hand cut-to-length line Mfc.: Ungerer Built: 1966 Material: Stainless steel Strip Width: 300 mm- 1500 mm Thickness: 1.5 mm (stainless steel) Cut length: 750 mm- 6000 mm Length adjustment: mechanical Coil weight: 9.000 kg Coil min/max inner Ø: 500 & 600 mm Shear Type: Rotary Hydraulic system Stacker capacity: 2000 ton PLC: Allen Bradley Scope of supply: Decoiler Crop shear Edge trimmer Leveller PVC film applicator Stacker Camera system

3000 x 1500mm 4000w With Bytrans Extended loading/Unloading

1 of used pneumatic, overhead mounted, moveable on rails, industrial manipulator / lifting device (balancer), make Dalmec, type Partner Equo PES, new 1993. Gripper-head with 4 length/width simultaneously adjustable suction cups (from 1.110 x 360 to 1.650 x 650 mm) with venturi vacuum generator for max. load 120 KG. Maximum turning radius 2.500 mm. Vertical stroke 1.250 mm. Tube length 5.000 mm. Last used for handling sheets of steel. Rails not included.

TECHNICAL DATA: Working area 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. sheet thickness structural steel 25 mm Max sheet thickness stainless steel 20 mm Max sheet thickness aluminium 12 mm Machine regularly serviced by TRUMPF! Standard: - Closed machine frame with integrated laser unit - TRUMPF laser TLF 5000 - Laser unit: CO2 laser, high-frequency excited, maintenance-free turboradial blower, cooling unit, logbook function - Automatic pallet changer and longitudinal conveyor belt - Drives: Gantry drive in combination with linear direct drives - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Plasma sensor inges, PMS - Automatic sheet metal edge detection - Programmable performance cycles - Microweld - Automatic nozzle cleaning - Fast editing with SprintLas - ContourLas for making small ho ...

Technical data: - bending and rolling by hand, - max working width 1020 mm - max. material thickness St 40 1.25 mm - Bending angle adjustment via end stop 10 - 180 ° - max hub upper cheek approx. 85 mm - max. adjustable bending cheek 20 mm - Shaft diameter 55 mm - Upper shaft can be swivelled - Rear shaft parallel + obliquely adjustable - Space requirement approx. W 1500 x H 1400 x D 750 mm - Weight approx. 400 kg

Unclinking machine, little used Notching machine , lessly used Type: VA 200/ 4 Built / yom: 1995 Manufacturer / make: KEMPFLE Table size: 1000 x 800 mm Power:/ capacity: 4 mm / for steel / steel 400 Nm/mm 3 mm for stainless steel 600Nm/mm Length of cutter blades: 205 mm Number of Strokes/ strokes: 60 per minute Cutting head/ cutter head: 30...135° (stepless) Weight / weight: 1.15 tons Connection value/ connected power: 4 kW

Robust, high-quality heavy beading and flanging machine with electric motor drive, electromotor bending roller delivery and electromotor displacement of the stop plate Largest sheet thickness that can be reshaped – 6 mm steel sheet/ST40, maximum extension 500 mm, maximum distance between the top and lower roller 48 mm, two working speeds 3 and 27 rpm – available at an additional cost with infinitely adjustable working speed and frequency converter, time relay for limiting the working cycle, drive power 3 kW + 0.75 kW, weight 1.150 kg

Robust, high-quality beading and flanging machine with electromotor drive, hydraulic bending roller delivery and manual displacement of the stop plate Largest sheet thickness, which can be reshaped – 1.8 mm steel sheet/ST40, maximum extension 200 mm, maximum distance between the top and lower roller 30 mm, two working speeds 4 and 24 rpm – available at additional cost with infinitely adjustable working speed and frequency converter, time relay for limiting the working cycle, drive power 1.5 kW + 0.75 kW, weight 210 kg

PLC - controlled round and flange ring shears (circular scissors) This can also be expanded into a combined circular scissors - flange machine. We supply the machine in semi-automatic design and as a fully automated production island. Rounds and flanges (sheet rings) made of steel sheet, VA stainless steel sheet, aluminium and non-ferrous metal sheet can be cut, maximum shear performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 12 mm, smallest / largest cutable circular board 500 mm to 2,200 mm – cutting speed up to 25 m/min, drive power 15 kW, weight of the base machine

Mechanical manual sheet metal shears of excellent quality, for the burr-free precision cutting of fine sheets up to 1 mm sheet thickness steel sheet/ST40 – aluminium 1.2 mm, backdrop-guided knife beam, maximum cutting length 3,080 mm, cutting angle 1.5°, manually operated rear stop with 750 mm travel range - +/- 5 mm slantable for conical cutting, optional with sheet metal high-holding device and automatic tipping device for the sheet metal cuttings in the section collection trolley, scissor table height 800 mm - scissor table width 300 mm - scissor table support width up to 480 mm, dimensions 3.55 m x 1.6 m x H 1.3 m, weight approx. 790 kg

We supply round and flange ring shears (circular shears) in two sizes - 3/1300 and 5/1800 Our KS circular shears are PLC - controlled hydraulic - electromechanical machines designed for the production of rounds and flanges made of steel sheet, VA stainless steel sheet, Aluminium and non-ferrous metal sheet, maximum shearing performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 3 mm or 0.5 mm to 5 mm, smallest / largest cutable circular board 150 mm / 1,300 mm or 1,800 mm respectively – cutting speed up to 35 m/min, drive power 5 kW or 7.5 kW, weight approx. 2,000 kg and 3,000 kg

Mechanical sheet metal shears of excellent quality, for the burr-free precision cutting of sheet metal up to 1.2 mm sheet thickness steel sheet/ST40 – aluminium 1.5 mm, backdrop-guided knife beam Largest cutting length 4,080 mm, cutting angle 1.5° - up to 25 cutting strokes/min, NC - controlled rear stop with 750 mm travel range, slantable for conical cuttings - automatic removal of the stop rail at sections deeper than 750 mm - with forced-controlled sheet lifting device - automatic tipping device for the sheet metal cuttings into the section collection cart, Scissor table height 800 mm - scissor table width 300 mm - Scissor table extension up to 480 mm support width, dimensions 4.75 m x 1.68 m x H 1.46 m, drive power 2.2 kW, weight approx. 1,500 kg

For the production of snap folds and Pittsburgh folds, we supply folding forming machines, which produce a folded workpiece from a wide variety of sheet metal materials using a rollforming process from a flat sheet metal strip. Frm Rolling machine for the production of snaplock folds (snap folds) and S- or L-shaped folds up to 32 mm output length – as well as Pittsburgh folds with 13 mm folding height, Material thicknesses that can be rolled-reshaped - steel + aluminium 0.6 mm to 1 mm - stainless steel 0.6 to 0.7 mm, forming stations 9 pieces - throughflow speed 15 m/min, e-instances per meter 20 pieces - punch ingesrant distance 50 mm, dimensions approx. 2.3 x 0.7 m x H 1.1 m, drive power 3 kW, weight 450 kg

Robust, high-quality rotary device for cylindrical workpieces (boiler roller set), steel rollers coated with polyurethane, infinitely adjustable rotation speed, high frequency protected, right and left run Largest load capacity of the two units together 5,000 kg, workpiece diameter 200 mm to 3,000 mm, drive power 2 x 0.37 kW, drive rollers made of steel of 250 x 80 mm, rotation speed 80 – 1,200 mm/min, maximum temperature load capacity of the rollers up to 110° C, dimensions see figures, weight of the set (driven and non-driven unit together) approx. 230 kg

Hydraulic sheet metal shears in backdrop cutting design with NC - controlled rear stop - manual cutting angle adjustment and hydraulic cutting gap adjustment, maximum cutting length 3,020 mm, maximum cutting capacity 8 mm steel sheet/ST40, cutting angle 0.5° to 2° NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections deeper than 1,000 mm - optionally available with a foldable sheet metal support at the rear stop or a conveyor belt with high-stop strips, drive power 11.5 kW, dimensions 3.6 x 1.2 m, weight approx. 7,600 kg

Robust, high-quality manual sheet metal bending machine (swing bending machine) Largest bending length 3,080 mm, highest bending performance over the entire bending length - steel sheet/ST40 - 1.2 mm - stainless steel sheet 0.6 mm - zinc sheets, copper sheets, aluminium sheets - 1.5 mm, largest opening width of the upper cheek 68 mm, largest bending angle 160°, working height approx. 930 mm, dimensions 3.55 x 0.75 (without rear stop) x H 1.3 m, weight 930 kg Equipment: automatic opening of the upper cheek (patented) when lowering the bending cheek – two opening widths can be adjusted 15 mm and 65 mm, adjustable angle stop for repeat-accurate series bends, weight equalization of the bending cheek for easy machine operation, buttoned upper cheek to press folds. Optionally at an additional cost, the machines are equipped with a rear stop with 750 mm travel - as well as with a bead  ...

NC - controlled mechanical sheet metal panel scissors in backdrop cutting design, maximum cutting length 1,050 mm, maximum cutting capacity 4 mm steel sheet/ST40, cutting angle 1.5°, NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections lower than 1,000 mm - optionally available with a foldable sheet support at the rear stop or a conveyor belt with upliftrs, drive power 5 kW, weight approx. 2,500 kg

Manual cut-out shears of excellent quality, for the burr-free cutting of sheet metal up to 1.5 mm sheet thickness steel sheet/ST40 – aluminium 2 mm, backdrop-guided knife beam, shear length 150 x 150 mm, clink angle 90°, dimensions 460 x 500 x 810 mm, weight 75 kg

Conventional or NC - controlled heavy electrohydraulic sheet metal bending machine (swing bending machine) of excellent quality Largest bending length 2,540 mm, vertical particularly stiff upper cheek - largest bending angle 100° - electric motor bending cheek drive (one motor left + right each) - hydraulic upper cheek movement with synchronisation control - largest opening width 230 mm, Working table height 870 mm, drive power hydraulics 4 kW - drive power bending cheek 2 x 1.5 kW, dimensions without rear stop 3.6 m x 1 m x H 2.15 m, weight without rear stop 4,300 kg

CNC - controlled electro-hydraulic precision long-bending machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 6,050 mm, extension 1,250 mm, maximum sheet thickness ST42 - 3 mm, maximum bending angle 135° - upper cheek opening range up to 200 mm, rear stop with foldable stop fingers - stop range 12 to 1,200 mm - inclination up to 40° - travel speed adjustable up to 500 mm/sec, working height approx. 830 mm, drive power 7.5 kW, dimensions approx. 6.4 x 1.8 m x 1.5 m, weight approx. 8,500 kg

CNC - controlled electromotor precision sheet cutting machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 3,100 mm, maximum sheet thickness ST42 - 3 mm, upper cheek angle 160°/140° - upper cheek stroke range up to 240 mm, Rear stop with 12 foldable stop fingers - stop range 12 to 750 mm (optional 1,000 mm or 1,500 mm) - travel speed adjustable - up to 500 mm/sec, working height approx. 830 mm, drive power 9 kW, dimensions approx. 4.6 x 1.8 m (depending on rear stop) x 1.9 m, weight 3,800 kg

CNC - controlled electromotor precision sheet cutting machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 3,100 mm, maximum sheet thickness ST42 - 1.5 mm, upper cheek angle 160° - upper cheek stroke range up to 160 mm, Rear stop with 12 foldable stop fingers - stop range 12 to 750 mm (optional 1,000 mm or 1,500 mm) - travel speed adjustable - up to 500 mm/sec, working height approx. 830 mm, drive power 3 kW, dimensions approx. 4.3 x 1.8 m x 1.65 m, weight 2,700 kg

Robust, high-quality rotary device for cylindrical workpieces (boiler rollers), steel rollers coated with polyurethane, infinitely adjustable rotation speed, high frequency protected, right and left run, maximum load capacity of the two units together 14,000 kg, Workpiece diameter 600 mm to 5,500 mm, drive power 2 x 0.55 kW, steel drive rollers of 400 x 100 mm, rotation speed 120 – 1,200 mm/min, maximum temperature load capacity of the rollers up to 110° C, dimensions see illustrations, weight of the set (driven and non-driven unit approx. 870 kg

Robust, high-quality beading and flanging machine with electric motor drive, optionally available with hydraulic bending roller delivery - optionally available with circular cutting device Largest sheet thickness, which is malleable - 3 mm steel sheet/ST40, maximum extension 450 mm, maximum distance between the top and lower roller 100 mm, two working speeds 6 and 33 rpm - available at additional cost with infinitely adjustable working speed and frequency converter, Time relay for limiting the working cycle, possible round diameter when using the circular cutting device between 300 mm and 1,200 mm (optional up to 1,620 mm), cutting power with the shear blades 3 mm steel sheet/ST40, drive power 1.8 kW – drive power hydraulics 1.5 kW, weight of the base machine 570 kg

Robust, high-quality round sheet bending machine for already profiled workpieces (sheet blades) - with motor drive at the bottom and top adjustable workpiece width between 300 mm and 800 mm, largest sheet thicknesses which can be bent round copper / titanium zinc / aluminium 0.8 mm - galvanized steel sheet 0.7 mm - stainless steel sheet 0.5 mm, smallest possible bending radius 350 mm - bending radius depending on the yield strength - smallest bending radius galvanized steel plate 0.7 mm - 1,000 mm, continuous speed infinitely adjustable 1 to 6 m/min, drive capacity 2 x 0.75 kW, weight 375 kg

3000w IPG 3000 x 1500mm

3000 x 1500mm 3000w

CNC - controlled press brake with 700 mm installation height + 400 mm press bar stroke - a press brake of excellent quality - used machine built in 2006 - very good condition, pressing force 3,500 kN, largest bending length 4,200 mm, passage between the side stands 3,550 mm, extension in the side stands 500 mm, maximum installation height 700 mm, press beam stroke up to 400 mm, press beam rapid speed 200/180 mm/second, drive power 15 kW, dimensions approx. 5 m x 2.3 m x H 3.45 m, weight 25,000 kg. Equipment: 8 CNC axes Y1/Y2 (press bars up and down) - X1 + X2 (the stop blocks back and forward 750 mm) - R1 + R2 (back stop blocks up and down to 200 mm) - Z1 + Z2 (stop blocks width adjustment 3,500 mm), DELEM® CNC - control with color graphics and 15" screen, Laser beam bending line monitoring, CNC – controlled hydraulic dynamic bombardment, compensation of stand suspension, WILA® hy ...