Paint mist extraction system Nestro Lacky E2416 2400x1600 mm 2.6 KW Blower drive is 2.6 KW three-phase explosion-proof 7000 m3/h capacity 400mm drainage nozzle 2 guide blocks 800 mm wide. Is equipped with filter mat / fabric 1500 mm high and paper filter Both ensure very good filtering of the paint mist. On the photo the full filters are still in there, we remove them and also have replacement filters that belong to it. The system is in good condition, the blower housing was packed and therefore still clean, as were the deflector plates. An approx. 8 m long 400mm spiral seam line can be taken along if the collector dismantles it himself. New replacement filters are included. PICK UP ONLY!
380 V, 50 Hz, 2.2 Kw Volume flow 2230 m³/h Suction nozzle 160 mm Pt 2180 Pa
Nestro Dust Collector NE 250J ECO Nominal volume flow 2,950m³/h Nominal Volume Flow Vacuum 2.526Pa 5.5Kw Filter area: 22.4m² Outrigger: 250mm
Separator lock / rotary valve Nestro, built in 2012, for the separation / differentiation of paper chips or paper edge sections Specifications: Manufacturer: Nestro Lufttechnik GmbH Year of construction: approx. 2012 Motor: 4 kW Volume flow max. 28000 m³/h Diameter inlet max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (LxWxH) Weight: approx. 3000 kg Remark: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. We will also be happy to answer any questions you may have about the machine by phone from Monday to Thursday from 08.00 to 14.00 h. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufac ...
Nestro ATEX - Rotary valve Product Name: Rotary Valve Type: 371004 Manufacturer: Nestro Lufttechnik Serial Number: SA0000427 Year of construction: 2022 Condition: used and refurbished Technical details: - new gear oil - New ATEX rotary sealing lips - new colour scheme - Refurbished housing - V nominal: 45 m³/h - Dimensions (L x W x H): 1,870 x 630 x 360 mm - Inlet and discharge opening (L x W): 1,500 x 300 mm - Transport dimensions (L x W x H): 1,870 x 800 x 510 mm (on pallet) - Weight: 165 kg (185 kg on pallet) Engine data: - Voltage: 230/400 V - Current: 4.25/2.45 A - Frequency: 50 Hz - Power: 1.1 kW - cos φ: 0.79 - Torque: 600 Nm - Speed: 1,412/12 rpm Price: on request (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of e ...
We offer an extraction system from NESTRO Lufttechnik GmbH. The machine is from 1996, but is currently no longer used. Due to the age-appropriate condition, we recommend a prior inspection of the facility. The system is offered - due to a new purchase from our customer. Particulars: - Manufacturer: NESTRO Lufttechnik GmbH, Hainkirchen - Model: SFN 24C - Year of construction: 1996 - Machine No.:343676/002-98 - Filter area: 240m3 The machine is still in our customer's factory near Leipzig. The sale takes place ex works EXW (loading possibility available). We sell the assets on behalf of our customers. The offer prices are gross prices in EURO ex works. The offers are subject to change, subject to error and subject to any prior sale. In this context, we expressly refer to our terms and conditions. We would also like to point out that we expressly exclude a return, a guarant ...
technical details: • Position: GR 360 (pos. 5) • Diameter suction nozzle: 200 mm • Diameter pressure connection: 200 mm • Volume flow: 3,820 m³/h • Steel impeller: straight • Dimensions (H x W x D): 1,080 x 590 x 700 mm (incl. motor and nozzles) electrical connection: • Engine manufacturer: VEM • Motor power: 4.0 kW • Voltage: 380 V • Current: 8.4 A • Frequency: 50 Hz • Revolution: 2,885 rpm Transport dimensions (H x W x D): 1,230 x 1,200 x 800 mm (on EURO pallet) The fan has been mechanically and electrically tested and has been repainted. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
technical details: • Position: GL 360 (pos. 1) • Diameter suction nozzle: 200 mm • Diameter pressure connection: 200 mm • Volume flow: 3,380 m³/h • Pressure increase: max. 2,000 Pa • Steel impeller: straight • Dimensions (H x W x D): 1,080 x 560 x 700 mm (incl. motor and nozzles) electrical connection: • Engine manufacturer: VEM • Motor power: 3.0 kW • Voltage: 380 V • Current: 6.15 A • Frequency: 50 Hz • Revolution: 2,840 rpm Transport dimensions (H x W x D): 1,230 x 1,200 x 800 mm (on EURO pallet) The fan has been mechanically and electrically tested and has been repainted. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
technical details: - Position: GR 360 (pos. 5) - Diameter suction nozzle: 250 mm - Diameter pressure nodle: 250 mm - Steel impeller: curved - Air volume flow (V nominal): 5,400 m³/h - New engine Engine data: - Motor manufacturer: SEVA Tec - Motor power: 7.5 kW - Voltage: 400 V - Current: 13.7 A - Frequency: 50 Hz - Speed: 2,920 rpm Dimensions (H x W x D): 1,130 x 850 x 690 mm Transport dimensions (H x W x D): 1,300 x 800 x 1,200 mm (on EURO pallet) Weight: 250 kg Consoles and vibration dampers can be requested and supplied on request. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
Nestro briquetting press BP 1101 - with daily storage tank and discharge Product name: Briquetting press Type: BP1101 / 710045 Manufacturer: Nestro Machine number: 64637 Year of construction: 1992 Condition: used, functional, cleaned The briquetting press consists of four components: 1. Pressing unit mounted on the base frame 2. Daily storage container 3. Control cabinet 4. Hydraulic unit with motor and pump technical details: Motor power: 7.5 kW Voltage: 380 V / 50Hz Current: 16.5 A Rotation: 1,440 rpm Operating hours: 5,390 hydraulic tank oil pump: 170 l Briquetting capacity: approx. 70-90 kg/h - Articulated arm discharge in the daily storage container - Daily storage tank with connection nozzle 350 mm diameter Container dimensions (L x W x H): 2,400 x 2,400 x 1,600 mm Installation dimensions with metal pedestal (L x W x H): 2,600 x 2,600 x 2,350 mm ...
Dust Extraction Plant Manufacturer: Nestro Year: 1991 Filter unit: Filter hoses: 121 pcs.(arrangement 11 x 11) / D230 x 2600mm Filte surface 261 m2, Filter material: category G Automatic motorized vibration cleaning / 4 motors Fire-extinguishing ducts Return air system Fire damper Pipes, Pipe bends Ventilators: Ventilators 3 pcs. a 7,5 KW, D 350mm Ducting, Ducting bends, ducting shutters with chains Control unit Nestromat 3 x Transducer coils for start automatic: 15 x
intake connection: 200mm; Maximum volume flow: 3200 m³/h; nominal volume flow: 2862 m³/h; volume flow: Differential pressure indicator; Vacuum: 2336 pa; filter area: 16,8 m²; Residual dust content: smaller 0,2 mg/m³; SPL: db; chip bag volume: l; filter regeneration: pneumatic; motor power: 4 kW; machine length: 2300 mm; machine width: 900 mm; machine height: 2200 mm; weight: 350 kg;
Motor power: 1 kW; Filter area: 2500mm x 1600mm; Exhaust nozzle: 300mm; Current consumption: 2.3 A; Weight: approx. 120 kg;
Dimensions (L/W/H): 2394x990x3115 mm Weight: 0 kg Total power requirement: 2,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1624x950x2345 mm Weight: 0 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: NESTRO Model: NE 250 J Year of Manufacture: 2023 Type of Machine: Dust Extractor Operating hours: 551.3 h Technical Specifications - Rated Airflow Volume: 2,950 m³/h - Rated Negative Pressure: 2,526 Pa - Filter Area: 22.4 m² - Connection Diameter (Suction Port): 250 mm - Weight: 930 kg - Max. Compressed Air Pressure: 8 bar - Motor Power: 5.5 kW - Operating Voltage: 400 V - Rated Speed: 3,000 rpm - Rated Current: 9.5 A - Frequency: 50 Hz Find more here - / Contact us at -
Manufacturer: Nestro, Type: N-300-B ex, Year: 1986, Diameter intake mm: 300, Engine power kW: 2,0, Flow rate approx. m3/h: 4300, rotations rpm: 1405, Direkt drive: yes, Ex-protected: yes, Year :1986
Manufacturer: Rippert, Year: ca.1995, Diameter intake mm: 450, Engine power kW: 18,5, Flow rate approx. m3/h: 7500, rotations rpm: 1470, Year :ca.1995
0: 300 mm 0: max./nom: 6.000/5.085 m³/h 0: v.V./nom: 2.950/2.400 Pa pa Filter capacity: 36,2 m² m² weight: ca. 1.300 kg Dimensions (L/W/H): 3.880 x 1.020 x 2.250 mm Dust extractor NE-J 300 3 ton. m. Jet filter regeneration -------------------------------------------------- Including a new type of extinguishing device with a drop flap and oxygen extraction, 5 m cable for junction box, high-efficiency reluctance motor IE5, FU control, Wired 7 color touch panel, automatic start/stop start control and monitoring of up to 10 woodworking machines included automatic slide control, integrated emergency stop function and is of course H3 tested. The newly designed model fits into any standard shipping container. The suction nozzle with injection box and non-return flap is located in the middle of the front dust extractor. The highly efficient JET filter regeneration guarantees high Filter servi ...
0: 160 mm 0: max./nom.: 1.780/1.447 m³/h 0: v.V./nom.: 3.160/2.450 pa Filter capacity: 12,3 m² weight: 430 kg Dimensions (L/W/H): 1.970 x 910 x 2.070 mm Dust extractor NE 160, J pneum. Filter regeneration ------------------------------------------------ For the extraction and filtering of wood dust and wood chips. GS and H3 testing according to GS-HO-07 (BGHM), vacuum filter with 2 swivel and 2 fixed castors including suction nozzle, with pneumatic Cleaning, 5 m cable with plug and reversing switch, fan included Integrated electric motor IE3 400V / 50Hz, with mobile bin and chip collection bag. Standard is intake manifold on the right / fan on the left. Suitable for standard Sea containers. Technical data / manufacturer description ------------------------------------------------ • Volume flow max./nom.: 1,780 / 1,447 m³/h • Operating volume flow: 2,300 m³/h • Negative pressure ...
0: 250 mm 0: 3530 m³/h 0: 2500 pa Dimensions (L/W/H): 3.350x1.020x2.290 mm engine output: 5,5 kW turning speeds: 2800 U/min compressed air: Pmax 8,0 bar weight: 1100 kg Nestro dust extractor NE 250 W For sale on behalf of the customer ex location -------------------------- Manufacturer description: Dust extractor with pneumatic shaking and automatic water extinguishing system Including suction nozzle d=300 mm, 5 m cable with plug and reversing switch, electric motor 5.5 kW 400V/50 Hz, on/off switch, potential-free Contact for machine monitoring, motor protection switch, Pressure difference display, 3 mobile dust bins Clamp bracket, 3 chip collection bags (PE) 600x600 mm, i=1100mm Housing made of galvanized sheet steel Technical data: Nominal volume flow 3,530 m3/h associated negative pressure 2,500 Pa Suction side connection d=250 mm Continuous operation mode Type of current: three-phas ...
