Key data: 6100 kg, 970 mm
Refurbished Beche KGH 8.0 forge hammer (built in 1980) The hammer was completely overhauled in Germany. The RAM (Schabotte) is from 2013. Control System: 2025 Description of the modernisation works: Hydraulic drive - Completely disassembled in 2024, cleaned, control valves replaced New control system - Siemens S7-1500F PLC control system with touch panel RAM (U-frame) - Contact surface ground - Insert adjusted - New wedge manufactured and hammered in Test run - Hammer was assembled in 2024 and tested in 2025 Technical description: Working capacity: 80 kJ The height max. 600 mm (without swallows) The height min. 200 mm (without dovetails) Bear depth: 810 mm Bear weight: 6100 kg Scabot weight: 105000 kg Total weight: 130700 kg Total height: 7.3 m above floor level Scope of delivery: •Hammer •Documentation The Modernisationword were well ...
Hammer C3-31 5-speed station wagon Year of construction 2024 With sliding table 2000mm Boom table 1100 with telescopic Length stop 1200mm swivel -45° 400V 3 kW (4 HP) 3 motors Degree Grid Index System Saw blade 250-315mm (without saw blade) Cutting height of 100mm Swivel: 90°-45° Parallel cutting width of 600mm Planing width of 310mm Planing fence can be swivelled 90° to 45° Dressing table length of 1400mm 3 Knife Automatic Planing Shaft Passage height from 4-225mm Thickness table length of 540mm Milling machine: 90° rigid Milling machine: 3000/6000/8000 and 10000 rpm Useful height 100mm Weight approx. 550 kg G&2992-o1852
Screws and small part scoop Brand: Hammer Type: SKP-M-300 Other details: Please see photos All information without guarantee
Band saw Hammer 4400, very good condition, 1.5 kW, approx. 110 kgPrices subject to change, errors, printing and typesetting errors excepted
AD planing machine Hammer A3-41, year 2001, less good condition, incl. driving device, impeller is worn, 4 kW S6, 1700 mm table length, 410 mm table width, 3 knives, 360 kgPrices subject to change, errors, printing and typesetting errors excepted
AD planing machine Hammer A3-41, year 2005, 1800 mm table length, 3 knives, 400 kgPrices subject to change, errors, printing and typesetting errors excepted
AD planing machine Hammer A3-41, very good condition, year 2023, 4 kW motor power, 1800 mm table length, 410 mm table width, incl. spiral planer shaft, 230 mm thickness planerPrices subject to change, errors, printing and typesetting errors excepted
AD planing machine Hammer A3-41, built in 2019, very good condition, incl. reversible blade and chassis, 4 kW, 1800 mm table length, 410 mm table width, 3 knives, 350 kgPrices subject to change, errors, printing and typesetting errors excepted
AD planing machine Hammer A3-31, good conditionPrices subject to change, errors, printing and typesetting errors excepted
AD planing machine Hammer A3-31, year 2018, very good condition, very little used, 310mm planing width, incl. 1 set of replacement knives (reversible knife), 3 kW, 3 knives, 300 kgPrices subject to change, errors, printing and typesetting errors excepted
4-fold combi hammer C3-31, standard equipment, 2000 mm table length, 3 knives, approx. 450 kgPrices subject to change, errors, printing and typesetting errors excepted
Format circular saw milling machine Hammer B3 Winner, year 2023, same as new, standard equipment, 2x3 kW, 2000 mm table length, 500 kgPrices subject to change, errors, printing and typesetting errors excepted
Sliding table saw milling machine Hammer B3 Perform, very good condition, 4 kW, 2500 mm Format table lengthPrices subject to change, errors, printing and typesetting errors excepted
Gasket set suitable for Hammer HM 200-250, also other gasket sets such as for HM300 / HM 1300 / HM 150 / HM250 available!
NEW - year of construction 2022, with Lehnhoff MS01 mount, incl. 1 chisel, 105 kg own weight, suitable for 1 - 2.5 t excavators
Hammer pile driver suitable for HM500 with 120 mm inner diameter, photos are only an example !
for 7 - 16 t dead weight, 700 kg dead weight, 45 l / min oil flow, 360° rotation, various mounting plates & hoses available on request
for 5 - 12 t excavator, 480 kg net weight, 25 l/min excavator oil flow capacity, 360° rotation,
Screw-on plate with Martin M10 mount, - Suitable for demolition & sorting grapples:, - GRP450, - GR45, - GRP750, - GR75, - Mount: Martin M10, - Hole pattern: 36 x 48 cm, - Made of mechanical steel S355, - Dimensions see product pictures, - Immediately available from stock
Screw-on plate with Martin M10 mount, - Suitable for demolition & sorting grapples:, - GRP450, - GR45, - GRP750, - GR75, - Mount: Martin M10, - Hole pattern: 36 x 48 cm, - Made of mechanical steel S355, - Dimensions see product pictures, - Immediately available from stock
