other wood working machines used for sale (1,326)

flue capacity: 125 kW; Conventional yeld capacity: 99 kW; flue diameter: 180 mm; hot air delivery pipes: 2 x 250 mm; flue length: 750 mm; oven width: 560 mm; oven hight: 700mm; air flow: 6300m³/h; power consumption: 1500W; aproximate surface to heat up: 1500m³; area to be heated: 300/350 m²; heater height without hot air conveying pipes: 1980 mm; heater width: 800 mm; heater length: 1280 mm; weight: 415 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs.Exchangers 2 or 3 smoke revs.Inner side made of bright sheet metal for casing and insulation.Outer side made of zinc plated sheet metal.Frame made of painted profile.Feeding doors with refractory and extractable grates.Panels with refractory for pipes cleaning.Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspens ...

flue capacity: 175 kW; Conventional yeld capacity: 140 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 250 mm; flue length: 950 mm; oven width: 600 mm; oven hight: 860 mm; air flow: 6300 m³/h; power consumption: 8900 W; aproximate surface to heat up: 2200 m³; area to be heated: 500/600 m²; heater height without hot air conveying pipes: 2200 mm; heater width: 930 mm; heater length: 1700 mm; weight: 615 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs.Exchangers 2 or 3 smoke revs.Inner side made of bright sheet metal for casing and insulation.Outer side made of zinc plated sheet metal.Frame made of painted profile.Feeding doors with refractory and extractable grates.Panels with refractory for pipes cleaning.Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic su ...

Rolls: 3; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: variable 3 - 18 m/min.; Tripod selectable: Delivery without tripod / optionally the following tripods can be selected: Standard / 1050 / PLUS with counter; Motor power: 0.75kW;

Wheels: 4; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: 8; Tripod: Tripod 1050mm; Motor power: 1/0.7kW; Uniform feed speed without loss of powerClockwise and counterclockwise rotationIncluding tripod, individually swivel and adjustable for horizontal and vertical useEight speeds possible, speed selection via switch and gearbox

Rolls: 3; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33m/min; Tripod projection: 1050 ; Motor power: 0.75kW; Uniform feed speed without loss of powerClockwise and counterclockwise rotationIncluding tripod, individually swivel and adjustable for horizontal and vertical useEight speeds possible, speed selection via switch and gearbox

rolls: 4; speed: 2 - 30 m/min; number of speeds: 2 Getriebe, 2 Motor, 2 Zahnrad-wechsel (8);

flue capacity: 34 kW; Conventional yeld capacity: 29 kW; flue diameter: 160 mm; hot air delivery pipes: 2 x 180 mm; flue length: 500 mm; oven width: 400 mm; oven hight: 590 mm; air flow: 2200 m³/h; power consumption: 400 W; aproximate surface to heat up: 500 m³; area to be heated: 100/150 m²; heater height without hot air conveying pipes: 1560 mm; heater width : 550 mm; heater lenght: 920 mm; weight: 190 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs.Exchangers 2 or 3 smoke revs.Inner side made of bright sheet metal for casing and insulation.Outer side made of zinc plated sheet metal.Frame made of painted profile.Feeding doors with refractory and extractable grates.Panels with refractory for pipes cleaning.Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspen ...

Wheels: 4; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: variable 3 - 18 m/min.; Tripod: Tripod 1050 plus; Motor power: 0.75kW; Uniform feed speed without loss of forceClockwise and counterclockwise rotationIncluding tripod PLUS with high-quality clamping levers and counter, individually swivelling and adjustable for horizontal and vertical useSpeeds from 3 to 18 m/min infinitely adjustable via rotary knobSpeed transmission by tapered pulley belt drive

roles: 3; speeds: stepless;

Wheels: 4; Speed levels: 2;

Roller conveyor length: 6000 mm; Roller conveyor width: 300 mm; Stop flap with Scala: Yes;

Roller conveyor length: 3000 mm; Roller conveyor width: 300 mm; Stop flap with Scala: Yes;

Motor power: 1.1kW / 230V; Cutting area: 100mm x 145mm; Feed: infinitely variable; Saw blade speed: 22 / 31 / 55 m/min; Saw blade dimension: 1638 x 13 x 0.65 mm; Cutting angle: -45Â to 60Â; Dimension: 1085mm x 498mm x 978mm; Weight: 78kg; Circuit breaker for the belt cover and the saw blade cover in low-voltage designSeparate emergency stop impact switchLow-voltage electronics 24 VGerlow-running Mobile machine substructureBall-bearing saw blade guideThree speed levels for a wide-ranging

racks: 17; support tube spacing: 60mm; rack length: 650mm; langth: 200 - 2000mm; rolls: Polyamid 4 Stück; depth: 870 - 1180mm; height: 198mm; safe load: 400kg; The user-friendly Varioflex drying rack is aspace-saving and gentle solution for storingpainted workpieces. The four swivel castorsmean that it can also be used for transportingworkpieces.Its solid tube frame design can be adjusted between200 mm and 2,000 mm.With 17 inside and outside plastic-coated supporttubes on each side, the rack can support up to400 kg of evenly distributed weight. The plug-in inside and outsidesupport tubes can be taken out and re-inserted as needed.When not in use, the drying rack can be collapsedand takes up minimal space.

Condition: very good;

Carriage length: 2500 mm; Cutting width at the width stop: 1000 mm; Cutting width at cut-to-length fence: 3000 mm; Cut depth: 125 mm; Vorritzer: yes; Height and swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: Scala; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 400mm; Speeds: 4000 rpm; Motor power / saw: 4.4 kW; Engine brake: yes / automatic; Milling mandrel swivel: yes 0 - 45Â; Height and swivel adjustment of the milling mandrel: handwheel; Altitude and

Carriage length: 2500 mm; Cutting width at the width stop: 1200 mm; Cutting width at cut-to-length fence: 2500 mm; Cutting depth: 100 mm; Vorritzer: yes; Height and swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: Scala; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 300mm; Speeds: 4000 rpm; Motor power / saw: 4.4 kW; Engine brake: yes / automatic; Milling mandrel swivel: yes 0 - 45Â; Height and swivel adjustment of the milling mandrel: handwheel; Altitude and

Carriage length: 2500 mm; Cutting width at the width stop: 900 mm; Cutting width at cut-to-length fence: 2500 mm; Cutting depth: 100 mm; Vorritzer: yes; Height adjustment saw blade: handwheel; Swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 300mm; Speeds: 4000 rpm; Motor power / saw: 4.4 kW; Engine brake: yes / automatic; Milling mandrel: 30mm; Speed of milling mandrel: 3000 / 6000 / 7500 / 10000 rpm;

angle: 0° - 90°; max cutting length: 1370 mm; easy handling and quick mounting on the carriage of the sawfor fast and stepless production of miter cuts on narrow and short workpieces at any angle from 0° to 90

Load capacity: 2000kg; electr. lifting: yes; electr. Driving: yes;

hourly output: 10 - 25 kg/h; briquette: cube 30mm x 30mm; drum dimension: 0,33 m³; dimensions: 1300mm x 740mm x 1200mm (L x B x H); motor Power: 2,2kW; weight: 233 kg; Very compact construction and economic operation.

Capacity: 15 - 70 kg/h; Briquette diameter: 60 mm; Automatic start-up: Yes; Oil Preheating System: Yes; Material moisture: max 15%; Container size: octagonal, diameter 750mm; Hopper height: Dimensions: 1500mm x 900mm x 1065mm (L x W x H); Motor power: 5.5 kW; Control cabinet: electronically controlled via PLC; Weight: 450 kg;

Capacity: 40 and 60 kg/h; Automatic start: yes; Oil cooler: Yes; Briquette size: 50mm diameter; Briquette length: 35mm; Tank size: 0.38 m³; Power consumption: 5.5kW; Machine length: 1860 mm; Machine width: 890 mm; Machine height: 1100 mm; Weight: 400 kg;