used Wood shredding systems for sale

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Description: 7hp 212cc electric start 4 inch shredding capacity dual v-belt drive blade length 150 mm twin blade drum system building kitApprox. Onsite Dimension. (l x w x h): 880 x 565 x 830 mm, weight approx.: 88 kg

Description: 7hp 212cc electric start 4 inch shredding capacity dual v-belt drive blade length 150 mm twin blade drum system building kitApprox. Onsite Dimension. (l x w x h): 880 x 565 x 830 mm, weight approx.: 88 kg

Description: 15hp 420cc electric start 6 inch shredding capacity dual v-belt drive blade length 150 mm twin blade drum system building kit unused 6471Approx. Onsite Dimension. (l x w x h): 2,700 x 800 x 1,630 mm, weight approx.: 252 kg

Funnel hacker - Shredder DHB DH 600 Rotor width: 600 mm Rotor diameter: 220 mm Number of knives: 28, concave sanded, quadruple rotatable Engine power: 18.5 kW Electrics: 400V, 50 Hz Control: Control cabinet, blower cooled, Siemens PLC Opening: 600 x 785 mm Funnel volume: approx. 0.60 m3 Screen: 20/25 mm mounted (screen size 10-80 mm possible) Hydraulics: 40 litre tank, external gear pump Dimensions: 1750 x 1280 x 1650 mm Weight: 1820 kg Throughput: 1-3 m3/h, depending on material and screen size Suction nozzle: 160 mm Suction capacity: min. 28 m/s extended funnel

Hydraulic wood splitter, functional Details on request

Wood chipper, sawmill edgings LINDNER type T 400/140-2 – after technical inspection - very good condition – for technological chips TECHNICAL PARAMETERS: inlet width 400 mm inlet height 140 mm rotor diameter 450 mm rotor length 400 mm main engine power 33 kW motor power from feed 2 x 1.5 kW number of knives 2 pieces sieve with dimensions of 60 mm x 90 mm feed shafts in very good condition feeder feed motor power 1.5 kW feeder length 4200 mm transport dimensions (length/width/height) 430 / 240 / 150 cm weight approx. 2000 kg

Slow runner with sliding floor 800 mm rotor width 11 kw motor good condition

Description: Machine no. 500-6115, motor approx. 22 KW, rotor 90 rpm, shaft length approx. 600 mm, push floorApprox. Onsite Dimension. (l x w x h): 2,200 x 1,500 x 1,900 mm, weight approx.: 1,900 kg

turning speeds: 90 U/minfunnel opening L-W: 800 x 1.200 mm: 1,1 m³rotor dia: 354 mm: 40 mmDust suction hood: 200 mmDimensions (L/W/H): 2.650 x 1.740 x 1.730 mmweight: ca. 2 ttotal power requirement: 37 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chipper Plant, Wood Chipper, Drum Chipper, Disposal Line RUDNICK & ENNERS: Vibro troughs total approx. 30 meters long, 50cm wide Conveyors Sieving Scraper conveyor Sweep Drum sieve with metal detector Wood chipper HEINOLAN: Year of construction 2001 Feed opening: 650x250 mm Feeding speed: 84.5 m/min good condition - fully functional Can still be viewed during operation. Location: Austria, near Graz

Rudnick&Enners Drum Chipper Type: RE-TH 250/650/5 Main motor: 75 kW Inlet width: 700 mm Inlet height 300 mm Feed rollers: 3 bottom, 2 top with control cabinet and metal detector

Chipper Shredder Teknamotor Skorpion 500 EB/2 – Polish production – year of production 2008 – DTR, CE – efficiency up to 14 mq/4 TECHNICAL PARAMETERS: inlet width 500 mm inlet height 130 mm shaft diameter 400 mm shaft width 515 mm main engine 45 kW number of knives 2 pcs. knife length 515 mm toothed shaft pulling from below lower shaft motor 1.5 kW toothed shaft pulling from above upper shaft motor 1.5 kW length of the feed belt length of the receiving belt 3000 mm 3800mm belt width 500 mm front/back belt feed transport dimensions (length/width/height) 500 / 240 / 220 cm weight approximately 2500 kg

Description: Double shaft shredder, 380 volt power supply, ideal for plastic, wood, iron shavings, paper. Loading mouth 620x570, never used 0 hours https://www.youtube.com/shorts/41Gxz5X5WQwApprox. Onsite Dimension. (l x w x h): 1,500 x 1,000 x 1,500 mm, weight approx.: 1,000 kg

ORDER NO. 6955 TECHNICAL SPECIFICATIONS - loading hopper inlet L x W 1070x710mm - outlet for shredded wood fi 200mm - rotor working width 700mm - main engine 18,5kW - pump motor 1,5kW - number of knives 21pcs - knife size 35x35mm - sieve 50mm - pressure drawer - electric autorewers - dimensions length / width / height 1700x1300x1640mm - weight 1780kg ADVANTAGES – German production – autorewers – pressure drawer – very good condition – used chipper Net price: 67900 PLN Net price: 15089 EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

Description: Slow-speed chipper with vibrating chute , approx. 4-5 m long , / blades and counter blades in good condition / 50cm working widthmain motor: 11 kW, daylight opening: 500 mm, Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 700 kg

Crushing machine for shredding joinery and joinery waste, as well as Wood waste of many kinds Insertion dimensions: 600 x 800 mm Propulsion: 18.5 kW Photo shows the machine as returned by customer

0: 800x600 mmMotor output: 18,5 kW0: 0,6 m³Diameter of the motor: 252 mmDimensions (L/W/H): 1700x1130x1595 mmWeight: 1300 kgNumber of working hours: 1741 hWEIMA shredder WL 4------------------------------------------------The Weima high-performance shredders with their flexible application optionsCan be used with all types of wood materials (hardwood, softwood, chipboard, MDFMaterials, plywood, veneer scraps, etc.) into fuel chips andachieve an enormous volume reduction with bulky materialsmaterials.Functionality :The machine is equipped with a large filling hopper and can be used usinga conveyor belt or can be fed by hand. This funnel can do thatcan be adapted to individual needs and guarantees continuousand cost-effective material feeding without requiring manual assistancemust be taken.The hydraulically controlled pusher guides the wood waste to be shreddedCutting area of the rotor a ...

Weima WL 6 Hacker Hopper size / feed opening (mm): 800 x 1200 Rotor diameter (mm): 368 Rotor length (mm): 800 Rotor speed (rpm): 60 - 100 Drive power (kW): 22 / 30 / 37 Number of knives (pcs.): 23 / 42 2 row of knives Weight (Kg approx.): 2000 Suction nozzle diameter (mm): 200 Screen perforation (mm): 10 - 40 G&WE-WL6/18,5

Chopper/shredder/shredder to crush by Carpentry waste, carpentry waste, pallets and wood waste of many kinds. Propulsion: 15 kW Insertion dimensions: 800 x 1000 mm Workshop tested in good condition