used Shredder for sale

Chopper Fabr. Ackermann Type HB 900/220 YOC 1991 with slider

CATALOG NO. 7166 TECHNICAL DATA - loading hopper inlet 810x630mm - rotor working width 620mm - main engine 18.5kW - pump motor 0.75kW - number of knives 30 pcs - knife dimensions 30x30mm - 41mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1800x1170x2000mm - weight approximately 1500 kg ADVANTAGES – German production – like WEIMA WL4 – pressure drawer – autoreverse – unpainted – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 47900 PLN Net price: 10644 EUR depending on the price 4.50 EUR Net price: 12605 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer ...

Rotary cutting crusher Claas R 71.1 for woodworking companies Filling opening 1590 mm Machine height 1965 m Filling volume 1.8 m3 Drive power 11 kW Connection cable 4 x 10 mm2 Fuse 50 A Machine weight 1000 kg Capacity depending on feed material up to 1000 kg / h Low noise below 80 dB Plant is ready dismantled, in good condition. Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Working Width: 450 mm Working Height: 220 mm

Working Width: 900 mm Working Height: 160 mm

CATALOG NO. 7069 TECHNICAL DATA - inlet width 400mm - inlet height 150mm - shaft width 450mm - shaft diameter 550mm - number of knives 2 pcs - 3 toothed shafts pulling from the top and bottom, 2×2.2kW - electric autoreverse - reverse gear - belt feeder - feeder length 5100mm - feed belt width 400mm - main engine 30kW - chipper dimensions length/width/height 2600x1500x1530mm - total dimensions of the feeder length/width/height 5200x560x910mm - weight approximately 3000 kg – with belt feeder – electric autoreverse - reverse gear – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 84900 PLN Net price: 18867 EUR depending on the price 4.50 EUR Net price: 22342 USD depending on the price o ...

For sale renewd shredder made by HOMBACK with 250kw. Used for shredding wood in long till chipwood.

Part Number: 7383 SPECIFICATIONS - inlet dimensions 480x190mm - shaft width 550mm - shaft diameter 420mm - number of knives 10pcs - knives arranged in 2 rows - autorewers - sieve diameter 50/80mm - Caterpillar from above - Track at the bottom - length of the loading track 3320mm - main motor 30kW - feed motor 2.2kW, 1.5kW - dimensions length/width/height 4860x1230x1170mm - weight about 3000kg ADVANTAGES – made in Germany – autorewers – caterpillar from above and below – very good condition – used chipper Net Price: 98900 PLN Net price: 22477 EUR calculated according to the price of 4,40 euros (With higher fluctuations the price may change)

CATALOG NO. 7102 TECHNICAL DATA - inlet width 400mm - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2 pcs - sieve dimensions 18x18mm - toothed shaft pulling from the bottom - lower shaft motor 0.75kW - toothed shaft pulling from above - upper shaft motor 0.75kW - belt feeder - feed belt length 3260mm - feed belt width 400mm - main engine 38kW - autoreverse - diameter of the exhaust pipe 250mm - total dimensions length/width/height 5200x1400x1870mm, - weight 2020kg – German production – autoreverse – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 88900 PLN Net price: 19756 EUR depending on the price 4.50 EUR Net price: 233 ...

CATALOG NO. 7027 TECHNICAL DATA - inlet width 400mm - inlet height 200mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2 pcs - sieve dimensions 80x80mm - toothed shaft pulling from the bottom - lower shaft motor 1.5kW - toothed shaft pulling from above - upper shaft motor 1.5kW - belt feeder - length of the feed belt 5400mm - feed belt width 400mm - main engine 30kW - autoreverse, - reverse gear - machine dimensions length/width/height 2200x1450x1150mm - feeder dimensions length/width/height 5300x550x500mm - weight 1950kg – German production, – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 78,900 PLN Net price: 17533 EUR depending on the price 4 ...

CATALOG NO. 7240 TECHNICAL DATA - inlet width 400mm - inlet height 210mm - shaft width 530mm - shaft diameter 500mm - knife length 530mm - number of knives 2 pcs - sieve dimensions 55x50mm - 2 geared rollers pulling from the bottom - lower shaft motor approximately 3kW - toothed shaft pulling from above - upper shaft motor 1.5kW - length of the feed belt 4600mm - feed belt width 400mm - main engine 55kW - autoreverse - feeder dimensions length/width/height 4630x620x760mm - machine dimensions length/width/height 2510x1700x1200mm - weight approximately 3500 kg – German production – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 85,900 PLN Net price: 19089 EUR depending on the price 4. ...

Part Number: 7361 SPECIFICATIONS - inlet width 400mm - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2pcs - sieve dimensions 60x60mm - 2 toothed pulling shafts from below - lower shaft motor 1.8kW - 2 toothed pull shafts from above - upper shaft motor 1.8kW - belt feeder - length of the feeding belt 2200mm - width of the feeding belt 330mm - main motor 22kW - autorewers - reverse gear - total dimensions length/width/height 4100x1350x1100mm - weight 1800kg ADVANTAGES – made in Germany – autorewers – reverse gear – used chipper, very good condition Net Price: 66900 PLN Net price: 15205 EUR calculated according to the price of 4,40 euros (With higher fluctuations the price may change)

Working Width: 900 mm WorkinG Height: 240 mm

Working Width: 800 mm Working Height: 300 mm Main Motor Power: 250 KW

ORDER NO. 7177 TECHNICAL DATA - inlet width 400mm - inlet height 160mm - shaft width 400mm - shaft diameter 450mm - knife length 410mm - number of knives 2 pcs - Pulling shaft from above, toothed - Pulling shaft at the bottom, toothed - conveyor belt - length of the infeed belt 3980mm - width of the infeed belt 320mm - motor about 0.75kW - autorewers - main motor 22kW - feed motor 2×1.5kW - machine dimensions length/width/height 2200x1000x1370mm - feeder dimensions length/width/height 4050x640x950mm - weight of the machine and feeder about 2000kg ADVANTAGES – with a conveyor belt – autorewers – used chipper, very good condition Net price: 65 900 PLN Ex Tax: €14,977 depending on price, €4.40 (Prices may vary in case of larger fluctuations)

CATALOG NO. 7191 TECHNICAL DATA - loading hopper inlet 870x735mm - rotor working width 720mm - main engine 18.5kW - pump motor approximately 0.75kW - number of knives 17 pcs - knife dimensions 80x40mm - 20mm sieve - pressure drawer - electric autoreverse - outlet for chipped wood, diameter 250 mm - dimensions length/width/height 2000x1350x1370mm - weight 1586kg ADVANTAGES – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 38900 PLN Net price: 8644 EUR depending on the price 4.50 EUR Net price: 10237 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulder ...

CATALOG NO. 7176 TECHNICAL DATA - loading hopper inlet 1050x600mm - outlet for chipped wood, diameter 160 mm - rotor working width 590mm - main engine 18.5kW - pump motor 0.75kW - number of knives 14 pcs - knife dimensions 30x30mm - 10x12mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1900x1200x1530mm - weight 990 kg ADVANTAGES – autoreverse – German production – unpainted – like WEIMA WL4 – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 48900 PLN Net price: 10867 EUR depending on the price 4.50 EUR Net price: 12868 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulde ...

Part Number 7301 SPECIFICATIONS - loading hopper inlet 1250x1040mm - outlet for shredded wood fi 2x220mm - rotor working width 920mm - chamber dimension at the rotor 900x820mm - main motor 18.5kW - 1.1kW pump motor - number of knives 39pcs - knife size 35x35mm - sieve 20mm, 20mm - pressure drawer - electric autorewers - dimensions length/width/height 2600x1800x2400mm - weight about 2100kg ADVANTAGES – made in Germany – autorewers – pressure drawer – very good condition – used chipper Net Price: 68900 PLN Net price: 15659 EUR calculated according to the price of 4,40 euros (With higher fluctuations the price may change)

Working width_ 600 mm Working height_ 300 mm N of knives_ 3 OTHERS AVAILABLE FROM STOCK

For sale two (2) maschines made by Pallmann, one 132 and second 200kw for processing chipwood till saw dust in wet condition (this maschine has rottary kniwes moving on left side and sieve moving opposite and make super results. Price: 132kw = 20.000 EUR Price: 200kw = 39,000 EUR

Wet or dry milling line capacity 60-65 m3/h Hammermill Grindingplatemill Rematec RPM 1000 electric motor 250 kW, • screwinput 3 × 3 kW • hammers made of wearresistant material • grindingplates casted of wearresistant material respectively hardened material Feeding container with moving floor Screw conveyor feeding rotary disc screen Screw feeder to screwinput RPM 1000 Screper conveyor

Part Number: 7362 SPECIFICATIONS - inlet width 450mm - inlet height 250mm - shaft width 530mm - knife length 530mm - number of knives 2pcs - sieve dimensions 60x60mm - 2 toothed pulling shafts from below - lower shaft motor about 1.5kW - toothed pulling shaft from above - upper shaft motor about 1.5kW - belt feeder - length of the infeed belt 4050mm - width of the feeding belt 400mm - main motor 45kW - autorewers - reverse gear - total dimensions length/width/height 6320x1330x1050mm - weight about 3500kg ADVANTAGES – autorewers – reverse gear – used chipper, very good condition Net Price: 77900 PLN Net price: 17705 EUR calculated according to the price of 4,40 euros (With higher fluctuations the price may change)

CATALOG NO. 7241 TECHNICAL DATA - inlet width 450mm - inlet height 230mm - shaft width 480mm - shaft diameter 380mm - number of knives 4 pcs - sieve size 50x40mm - toothed shaft pulling from above and below - shaft motor approximately 2×1.5kW - electric autoreverse - with conveyor belt - feed belt length 2190mm - feed belt width 440mm - front/backward belt feed - feed motor 1.5kW - main engine 30kW - dimensions length/width/height 3730x1670x1200mm - weight 1750kg – German production – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 76900 PLN Net price: 17089 EUR depending on the price 4.50 EUR Net price: 20237 USD depending on the price of 3.80 USD (Prices may vary with higher fl ...

Vecoplan chipper for sawmill cuttings 45/16/2V - German production - perfect wood chips directly into the furnace - vibro-gutter system TECHNICAL PARAMETERS: - width 450 mm - height 160 mm - number of knives: 2 pieces - engine power 50 kW - rotor diameter 500 mm - rotor length 475 mm - 40 x 40 mm sieve - upper gear shaft pulling 4 kW - lower gear shaft pulling 2.2 kW - reverse - feeding vibrochute 10500 mm x 450 mm - engine power 2.2 kW - transverse vibrochute 4500 mm x 2200 mm - engine power 1.5 kW - height 2450 mm Transport dimensions: 1050cm x 245cm x 245cm weight ~ 4 tons

Chopper, Shredder, Shredder Fabr. Vecoplan Type VAZ 100 / 80 YOC 1994 New engine 18.5 Kw (invoice available) New gearbox (invoice available) Sieve 25 mm with Hydraulic Gate Valve

CATALOG NUMBER 6114 TECHNICAL DATA - 800x1000mm loading hopper inlet - rotor working width 800mm - pump motor 0.75kW - 15kW main engine - number of knives 21 pcs - dimensions of the knives 30x30mm - 0.8x10mm sieve - pressure drawer - electric reverse - 2 × 1.1kW discharge augers - dimensions length / width / height 2460x1800x2250mm - weight 1660 kg - German production - reverse - pressure drawer - unpainted - very good condition - used chipper Net price: 69 900 PLN Net price: 16069 euros depending on the price, 4.35 euros (Prices may vary for greater fluctuations)

Weima WL 4 Hackers Weima Single-shaft Shredder NEW Funnel opening with logspacer 600x1050mm Funnel content 0.6m/3 Working width of the rotor 600mm Diameter of rotor 252mm Drive power 18.5 kW Rotor speed 80-120 rpm Knife number 28 pieces Type & size of knives concave / 40 x 40 mm Sieblochung 10 - 100 mm Painting WEIMA Standard RAL 2002 / 7016 Connection value 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg 2nd knife row

CATALOG NO. 7091 TECHNICAL DATA - dimension of the loading hopper length/width 1000x800mm - rotor width 800mm - 15kW motor - sieve - knife dimensions 40x60mm - number of knives 20 pcs - autoreverse - pressure drawer - outlet for chipped wood, diameter 260mm - dimensions length/width/height 2040x1700x1530mm - weight 1680kg ADVANTAGES – German production – unpainted - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 39900 PLN Net price: 8867 EUR depending on the price 4.50 EUR Net price: 10500 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulders in Poland, Woodworking ...