other wood working machines used for sale (1,386)

Part Number: 7973 SPECIFICATIONS - inlet width 410mm - Inlet height 210mm - shaft width 430mm - shaft diameter 330mm - knife length 430mm - number of knives 2pcs - sieve dimensions 50x50mm - Pulling shaft geared from below - 1.1kW lower shaft motor - Pulling shaft geared from above - 1.1kW upper shaft motor - vibroryn - vibroline length 4160mm - vibroline width 370mm - main motor 45kW - autorever (adjustable) - reverse gear - overall dimensions of the machine l/w/h 2150x1450x1050mm - Overall dimensions of the vibroline l/w/h 4160x650x880mm - weight about 2500kg ADVANTAGES – German production – autorever (adjustable) – protects the machine from blockage and damage in case of overload – reverse gear – DTR documentation – used chipper, very good condition Net price: 73900 PLN Net price: 17595 EUR depending on the price 4.20 EUR (Prices may cha ...

Part number 7975 SPECIFICATIONS - Inlet width 450mm - Inlet height 250mm - shaft width 530mm - knife length 530mm - number of knives 2pcs - sieve dimensions 50x50mm - 2 gear pulling shafts from the bottom - lower shaft motor about 2.2kW - Pulling shaft geared from above - upper shaft motor about 2.2kW - conveyor belt - Conveyor belt length 6500mm - conveyor belt width 400mm - main motor 37kW - 0.37kW conveyor motor - autorever (adjustable) - overall dimensions of the machine l/w/h 2400x1300x1100mm - overall dimensions of the conveyor belt length/width/height 6600x610x550mm - weight about 2500kg – German production – autorever (adjustable) – protects the machine from blockage and damage in case of overload – with a 6500mm conveyor belt – used chipper, very good condition Net price: 115900 PLN Net price: 27595 EUR depending on the price 4.20 EUR  ...

Part number 7974 SPECIFICATIONS - inlet of the widened loading hopper 1500x1730mm - outlet for shredded wood fi 200mm - rotor working width 990mm - main motor 22kW - 0.75kW pump motor - number of knives 54pcs - knife size 40x40mm - 20mm sieve - pressure drawer - electric autoreverse - dimensions l/w/h 2500x2200x2350mm - weight about 2000kg ADVANTAGES – German production - pulse pusher - Pusher to half - Fast/forward pusher – automatic speed adjustment of the pressure drawer – original DTR + CE documentation year 2018 – pressure drawer – viper – screw conveyor, responsible for transporting wood chips – autorever – used chipper, very good condition Net price: 115900 PLN Net price: 27595 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

complete in standard version with: - Fully automatic electronic control with Program selector switch RINSE-GLUE-GLUE/DRIVE - Dowel feeding via electronic vibratory conveyor with potentiometer for infinitely variable adjustment of the dowel conveying capacity - Automatic dowel diameter and dowel length control with Auto-DL-Selekt system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed glue system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 2,250 mPas - Stepless electronic glue quantity adjustment with potentiometer by means of time preselection by electronic control - Glue/water selector switch for rinsing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and dirty water collection container) - Control lamp for glue r ...

Code: 0396 Brand: EINHELL Model: TC - WW 1000 Wood lathe Technical specifications: Power supply 220 Volt Centre distance 1000 mm Turning diameter 280 mm Motor power 350 W N° 4 speeds (890/1260/1760/2600 rpm) Backing pad Tailstock Overall dimensions mm 1500 x 200 x 350 h Weight kg 23

Edgebander manufactured in 2005. This IMA Advantage 600 features jointing cutters, a gluing unit for thin and thick edges, and a pressing zone. It includes two trimming units, flush trimming, and profile and surface scrapers for enhanced finishing. If you are looking to get high-quality edge banding capabilities, consider the IMA Advantage 600 machine we have for sale. Contact us for further details.

Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible.

Edgebander manufactured in 2016. This BIESSE Akron 1440 A features a pre-milling unit, multifunction milling units, flat trimming, and a corner rounding unit. It also includes automatic glue application, motorized adjustment of units, and a touchscreen control for ease of use. It comes with the complete panel return system. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details.

Clean air extraction ALKO Power Unit 200P -used air filtration by means of filter bags, cleaning pneumatic, dust-tested, mobile collection container---------- Technical data ----------extraction nozzle: 200 mm, nominal volume flow: 2,261 m³/h, max. vacuum: 2,174 Pa, number of bags: 2 pieces, motor: 3 kW, compressed air connection: 6 bar, dimensions (LxWxH): 2,300 x 850 x 2,050 mm, weight: 470 kg

Radial fan, dust extraction fan, fan, extraction, dust blower -Manufacturer: Ferrari, Radial fan in soundproof container -Container manufacturer: Wagner Lufttechnik -Engine: Siemens, 11 kW -Speed: 1460 rpm -Pressure and volume performance: unfortunately not visible -Fan wheel: Ø 700 mm -Connection input: Ø 790 mm -Connection output: 700 x 500 mm -Quantity: 2 blowers available -Price per piece -Dimensions: 2130/2135/H2480 mm -Weight: 1325 kg

Hydraulic veneer cutter MONGUZZI mod. 3200 used theoretical useful cut mm. 3200 nr. 2 motors installed power HP 10 Motorized rear guide with mechanical display Cutting height REER safety barrier (new) for finger detection - security level type 4 - Machine length mm. 4400 Weight kg. 3800 overhauled machine, in excellent condition CE compliant

Double-end profiler winter Type RYD 6020 Year of construction 2010/6 Working width approx. 2000 mm Working height approx. 10 – 120 mm Feed speed approx. 6 – 36 m/min. 1 unit per side Motor power approx. 5.5 kW each Feed motor approx. 4 kW Motor width adjustment approx. 0.75 kW Connected load 15.1 kW Weight 4000 kg

Motor 18.5KW Rotor length 600mm Hydraulic Moving Floor Machine is immediately ready for use For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively tested before sale to ensure the highest quality and reliability. The satisfaction of our customers is our top priority. You are welcome to visit and test the machines in advance so that you can personally convince yourself of their flawless function and quality. In addition, delivery can be organized by us on request. For further information or questions, please do not hesitate to contact us at any time by phone or message.

Panel saw FORMAT 4 Kappa V60 -used-welded frame with extremely high rigidity, automatically evasive moving grate, stable detent of the saw carriage at the top and bottom, control panel at eye level, digital display at the longitudinal stop, digital display for horizontal cut, stiffening cutting device, lifting roller transport system, edible support, extraction device TRK, dust-tested---------- Technical data ----------cutting length: 4,300 mm, cutting height: 2,200 mm, cutting depth: 60 mm, Saw blade : 250 mm, Motor: 3 kW,

Clean air extraction HÖCKER-POLYTECHNIK Vacumobil EA 250-4 -geAir filtration by means of filter bags, cleaning motorized, dust-tested, mobile collection container---------- Technical data ----------extraction nozzle: 250 mm, nominal volume flow: 4,241 m³/h, minimum volume flow: 3,534 m³/h, number of bags: 3 pieces, motor: 4 kW, dimensions (LxWxH): 2,500x1,280x2,500 mm, weight: 630 kg

Locatelli OMK300 + UF 150/220 automatic lathe Turning length 300mm Maximum Bracket 100x100mm Minimum Branch 20×20 Work after the copiers Drill transfer UF 150/220

Motor 22 KW

Complete, well-preserved log yard. Completely inclusive round timber feed for short and long logs, with long timber cutting and sorting, log turner, metal detector, debarking system Esterer ER 90, Bruks root reducer, and sorting line, very robustly built. Complete disposal and including the complete steel substructure and all cabling up to the switchgear. Complete control system as well as operating cab with operator station as a container solution. Simply complete Dismantling on your own

- Manufacturer: Homag - Type: CNC machining center incl. vacuum tube lifter JUMBO ERGO 85 - Model: Profi BOF311/40/21/R - Year of manufacture : 2012 - Dimensions: 9,830 x 7,420 x 3,000 mm (length x width x height) - Condition: very good, regular annual maintenance by a licensed Homag partner - Special feature: Inkjet printer instead of a label printer - Milling unit 7.5/12kW - Maximum speed n: 24,000 min⁻¹ - Drill head: individually controllable, quick-change chuck - 9 vertical spindles - 2x 2 horizontal spindles - Tool magazine - 12-position changer - Securing the work area with a safety mat divided into three zones - CE certification (DE, EN & RO) available - Language package: German, English, Romanian - Software: - WoodWOP 8 - New machine computer in July 2022 including upgrade of machine operating system Find more here - .ucymachines/ Contact us at - sales@ucymachines

Wood production line manufactured in 2020. This HYMMEN JUPITER JPT C 680/548 mit OFS 850 features a maximum printing width of 548 mm, with a system speed ranging from 8 to 65 m/min. It is designed for high-speed surface finishing of large panels, ideal for the flooring and furniture industries. If you are looking to get high-quality printing capabilities, consider the HYMMEN JUPITER JPT C 680/548 mit OFS 850 machine we have for sale. Contact us for further details.

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular