OTT MEGAtronic 111 Wide-belt calibration fine grinding machine 1. Grinding Unit Calibration Roll Unit 2. Grinding unit electronically controlled link sanding shoe unit Working width 1100 mm Feed speed 5 + 10 m/min Motor power grinding unit approx. 11 kW Machine is WORKSHOP TESTED from stock Lieboch
OTT Tornado R + PU PLC Comp. Control 7" TFT-Touch color display CM-CombiMelt for EVA and PUR hot melt adhesives Pre-milling unit - joining Full car. Role magazine Full car. Edge magazine Flush caps pneum. 0-3° Flush Milling - 12mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounds Radius scraper blade Wing Scraper Soundproof booth with room extraction Cleaning set with 4-fold spraying device, fine buffing device and lubricant spraying device First delivery 2006 Machine is WORKSHOP TESTED in TOP CONDITION from stock Lieboch
I am selling a wide belt sander OTT MEGA TR11, built in 1996. Configuration: Hard-rubber calibration cylinder Combination unit rubber cylinder + pneumatic shoe with segment control. Working width 1100mm. Electronic height adjustment with digital display. 3-160mm 1 motor 11kW 2 feed rates. Sensitive adjustment of the shoe position. Pneumatic adjustment of the shoe and cylinder pressure. Condition LIKE NEW ! The machine worked very little. Available the same.
Edge thickness 0.4 - 3 mm Workpiece thickness: max 50 mm Min workpiece length 150 mm Feedspeed 22 m/min
Electricity connection 400V 13kW 2 heating plates à 1200 x 2250 mm Heating plates controlled by 2 thermostats Press pressure at 250 bar LxDxH: 2590 x 1330 x 1950 mm Weight approx. 2800 kg Press thickness 380 mm
OTT Comet-2 1100 • Wide belt sanding machine • Grinding width 1100 • Machine is unchecked • Service recommended • No Guarantee / No Warranty • From stock Lieboch NET € 1.500,00
PART NUMBER: 7549 Specifications: - max width of the workpiece 1100mm - max height of the workpiece 170mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + boot boot + metal roller –in advance: - metal roller, slip - aggregate - metal roller, slip - A unit with a shoe - metal slip outfeed roller – from below: - Pulling strap - pneumatic oscillation of the belts - electric lifting of the table top - 2 types of feed speeds - 11kW motor - with pneumatic brake - working pressure 6-8bar - extraction spigot diameter 2x150mm - total dimensions length/width/height 1960x1700x2000mm - weight about 2000kg ADVANTAGES – made in Germany – 2 units – unpainted – used grinder, very good condition Net price: 34900 PLN Net price: 8116 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)
Wide belt grinding machine OTT RS-O Grinding width: 1300mm Calibration roller + fine sanding + cleaning brush
Key data: 110 mm, 1 , 160 mm
Specifications: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec. Feed speeds: 4 + 8 m/min. Motor power grinding agregate: 11 kW, power adjustment: 0.55 kW, feed carpet: 1.3/1.8 kW Operating pressure: 6 bar, Air requirement: 10 l/min., Suction nozzle: 1 x 150 + 1 x 120 mm WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg Standard equipment: - Contact roller D=150 mm, hardness 90° Shore - Air sanding shoe with automatic insertion and removal - Rigid sanding shoe for solid wood frame sanding - Brush roller driven by the grinding unit - Automatic centering of the feed carpet - Extension carpet with high quality rubber circular hole carpet and auto. Carpet centering - Pneumatic sanding belt tension with length compensation - Non-contact abrasive belt oscillation, electronic - Low ...
Heated Bonding Press Manuf.: Paul OTT Model JU3013 415v 51kW (Tech data attached)
Edge Bander Manafacture: OTT Model No.: K155 Year of construction: 1992 Equipment: Roll magazine Glue unit with hot-melt adhesive - glue basin Pressure zone Cross-cut units Flush milling units Fine milling units with chamfer or radius milling Scraper Wobble
Machine is still in < operation and fully functional solid up to 20mm rolls PVC to 3 mm caps flush milling RADIUS milling milling Schwabbleln chamfer
pressing area: 3000 mm x 1350 mm; opening: 400 mm; heating: electrically; plate sourface: alu; emergency stop switch: yes / ripcord; pressure: 140 t; number of cylinder: 8; electriticy: 34 A; motor power: 22,4 kW; machine length: 3550 mm ; machine width: 1550 mm;
Manufacturer: OTT Model: Strong Edge Year of Manufacture: 2020 Type of Machine : Edge banding machine Find more here - / Contact us at -
Manufacturer: OTT, Type: M259, Year: 1994, Program: Ott, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 50, Min-max feed m/min: 8-24, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes steuerbar, radius milling: yes steuerbar, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Compressed air bar: 6, Noise enclosure: yes, Year :1994
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 6.5 kW -Output: 220 V 200 Hz -Power: 6.5 kW -for edge banding edge banding machine -Dimensions: 330/650/H270 mm -Weight: 105 kg
Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: OTT, profile scraper from edge banding machine type U206 -Quantity: 1 piece available -Dimensions: 460/430/H560 mm -Weight: 57 kg
Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Type HF 08.2 -Power: 0.6 kW / 200 Hz -Speed: 1200 rpm -Adjustment ranges: see photos -Number: 2x milling unit available -Price: per piece -Dimensions: 530/490/H600 mm -Weight: 67 kg/piece
Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor, saw unit, milling unit saw unit -Manufacturer: Paul OTT, saw unit from edge banding machine U 206 -Engines: Type K 14 -Power: 0.8 kW / 200 Hz -Speed: 1200 rpm -Saw blade: Ø 140 mm -Saw blade spacing: 515 to 1070 mm -Dimensions: 530/490/H600 mm -Weight: 78 kg
Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, plastering unit -Manufacturer: Paul OTT, Finishing unit from edgebanding machine U 206 -Type: KEO-04 -Motor: 0.3 kW -Speed: 1450 rpm - laterally adjustable -Height: adjustable -Number: 2 units available Price: per piece -Dimensions: 400/280/H660 mm / 480/290/H660 mm -Weight: 35 kg/ 36 kg
DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer: Ott, Servo geared motor BLDC worm gear motor -Type: TBSL043030010-110 -Voltage: 24 V -Speed: 300 rpm -Transmission: Transtechno i= 10 -Shaft: Ø 14 x 63 mm -Quantity: 1x geared motor available -Dimensions: 215/63/H95 mm -Weight: 2.3 kg.
Gluing unit, gluing part, gluing head, heating tank for edge banding, edge banding machine, melting unit with granulate container for edge processing machine -Manufacturer: Paul OTT, aggregate carrier from edge banding machine U 206 -Individual components: see photos -Dimensions: 780/400/H230 mm -Weight: 27 kg/piece
Speed control unit, speed controller, controller, motor controller, motor control, motor control controller, motor controller Manufacturer: Ott, Motor control motor controller -Type: K10024-02 -Motor control: M-BL-10-24 -Number: 2 controllers available Price: per piece -Voltage: 15VDC to 30VDC -Dimensions: 75/45/H105 mm -Weight: 0.2 kg/pc.
Motorised height-adjustment Sound enclosure over all trimming motors Equipment: Coil and strip magazine Hot melt unit Pressure zone End trims, chamfer and straight, automatic adjustment Top/bottom rough trimming Top/bottom fine trimming, tilting, Contour trimming unit Scraping unit Buffing unit return conveyor Ligmatech ZHR 05
Edgebander manufactured in 2005. This OTT Twister features a hot-cold melt adhesive application process and can handle edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses of 8 to 60 mm and has a feed speed of 14-20 m/min. If you are looking to get high-quality edge banding capabilities, consider the OTT Twister edgebander we have for sale. Contact us for further details.
This OTT ST 1611/60 veneer press was manufactured in 1996. It features a maximum pressing force of 70 tons, pressing plates measuring 1300x1611 mm, and a power output of 10.1 kW. The plates are electrically heated, enhancing its efficiency. Consider the opportunity to buy this OTT ST 1611/60 veneer press. Contact us for more information.
This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine.
An OTT heating plate press is available. Pressing area X/Y: 2250mm/1200mm, heating plates: 2, connected load: 14kW, pressing force: approx. 65t, max. pressing height: 300mm, machine dimensions X/Y/Z: approx. 2600mm/1350mm/1800mm, weight: approx. 3300kg. An on-site inspection is possible.
Manufacturer: Ott, Type: Euromatic FÜ, Year: 2001, Program: yes, Control: SPS, Work piece width min-max mm: 60 , Min.-max. workpiece length in mm: 60, Min.-max. workpiece height in mm: 10 - 60, Kantenmaterial min-max mm: 0,2 - 15, Vorschub min- max m/min: 12 - 20, Mitre stations: yes, Fasefräsen: yes, Flat scraper: yes, Rolle/Riemen: Rollen, Machine lenght mm: 8500, Wight approx. kg: 4200, Year :2001
