Manufacturer:
(Category: 209)
This 4-axis HOMAG PROFI KFL20/29/QA/25 was manufactured in 2003. Ideal for efficient edge banding, this double-sided edgebander represents a robust solution for woodworking needs. Consider the opportunity to buy this HOMAG PROFI KFL20/29/QA/25 double sided edgebander. Contact us for more information.
This HEBROCK AKV 3003 DK-F was manufactured in 2002. A robust edgebander with a total power of 10.5 kW, operating on 230/400 V and 50 Hz. Ideal for efficient edgebanding operations. Contact us for more information about this machine.
This BRANDT KDF 991 edgebander was manufactured in 2008. It is designed for efficient edge banding applications. Consider the opportunity to buy this BRANDT KDF 991 edgebander. Contact us for more information.
This WEBER LCE-2000-S-S1350 was manufactured in 2001. It features a wide-belt sanding machine with a working width of 1350 mm, a sanding unit plus a cleaning brush, and sanding shoes with pressure beam segment control. The cutting speed of the sanding belt is infinitely variable, and it has a 15 kW frequency-controlled drive. Maximum feed speed is 14 m/min. Contact us for more information about this machine.
This SORBINI SmartCoater SP1 was manufactured in 2009. It features a working speed of 5â20 m/min and can handle workpiece widths up to 1,350 mm and thicknesses up to 100 mm. It includes SUPERFICI UV lamps and a VENJAKOB conveyor belt, enhancing its efficiency in wood production. For more information about this machine, please reach out to us.
This edge processing line was manufactured in 1996. It features a robust double-sided edge processing line, including a gluing unit with granulate pre-melter and a 6-position roll magazine for edging material. Equipped with both flush and fine milling capabilities, it also includes a profile scraper and a buffing unit. Ideal for longitudinal and transverse processing, the IMA COMBIMA offers comprehensive functionality for advanced woodworking tasks. For more information about this woodworking machine, please reach out to us.
This OMC PPC/e was manufactured in 2015. It features a robust steel structure with a rack and pinion guide system ensuring parallel plate movement. The hydraulic system includes a noise-reducing two-stage power unit and multiple safety valves. Equipped with a basic electrical control module, it offers manual and automatic plate opening options. Consider the opportunity to buy this OMC PPC/e. Contact us for more information about this machine.
This single sided edge banding machine was manufactured in 2000. It features a robust Beckhoff control system and operates with a mechanical gear motor for precise workpiece transport. The machine handles various edge materials, including veneer, PVC, and solid wood, with capabilities for both coil and strip ware. It supports a maximum edge height of 55 mm and a panel thickness up to 50 mm. Ideal for detailed woodworking tasks, the IMA COMPACT PC-6220 F machine we have for sale. Contact us for more information.
This 5-axis WEINIG U23 wood moulder was manufactured in 1991. Ideal for detailed woodworking, it offers precision and efficiency. Consider the opportunity to buy this WEINIG U23 wood moulder. Contact us for more information about this machine.
This IMA Combima/II/390/B/L12 was manufactured in 2010. A robust double-sided edgebander, it features a max feed width of 3,300 mm and handles workpiece thicknesses up to 60 mm. Equipped with ICOS OPEN control for precision, it supports both roll and strip edgebanding materials. Ideal for high-capacity environments requiring flexibility and reliability in edge finishing. Contact us for more information about this machine.
This IMA Combima Systems/I/R75/1370 edgebander was manufactured in 2006. It handles workpieces ranging from 250 to 2800 mm in length and 115 to 1300 mm in width, with thicknesses up to 40 mm. Designed for materials like chipboard and MDF, it features a hot melt adhesive applicator and a servo edge feed system. Ideal for high-quality edge banding, consider the opportunity to buy this IMA Combima Systems/I/R75/1370 edgebander. Contact us for more information about this machine.
This HOMAG KFL 526 / C was manufactured in 2006. A robust double-sided edgebander, it handles workpiece thicknesses from 12 to 40 mm and sizes up to 2500 x 1200 mm. Features include a gluing unit, profile trimming, and a finish unit for precise edge finishing. Ideal for efficient edge banding with speeds up to 35 m/min. Contact us for more information about this machine.
This HOMAG KAL 310/7/A3 was manufactured in 2010. A used single-sided edge banding machine featuring a 28-position ISAS edge magazine, PU gluing unit, and Boomerang return system. It includes a joint milling unit with two motors and a PU 34 gluing system with a capacity up to 6 kg/h. Ideal for precise edge banding applications. Contact us for more information about this machine.
This ERREGI 300 LP was manufactured in 2018. It is a shrink foil packaging line designed for automated packaging with precise temperature control and efficient air circulation for uniform shrinkage. Features include a 400 V, 50 Hz voltage, 15 m/min feed rate, and dimensions of 12m x 4m x 2.5m. Consider the opportunity to buy this ERREGI 300 LP. Contact us for more information.
This BIGonDRY LEM 96.73.41 drying chamber was manufactured in 2021. It features three chambers with a total capacity of 270 m3 and dimensions of 10.2x7.5x5.4 m. Designed for hardwood drying, it achieves a final moisture content of 10 +/- 2%. The fully automatic VENUS 2500-24F-PRO control system ensures efficient operation. Consider the opportunity to buy this BIGonDRY LEM 96.73.41 drying chamber. Contact us for more information about this machine.
This 6-axis Bi Matic CH 2.2 edgebander was manufactured in 2010, featuring a glue pot capacity of 2 liters and dual vertical saws for end trimming at 12,000 rpm. It supports edge thickness up to 3 mm and requires an air pressure of 6 bar. If you are looking to get high-quality edgebanding capabilities, consider the Bi Matic CH 2.2 machine we have for sale.Contact us for more information.
This HOMAG Optimat KAL 310 was manufactured in 2007. It features a left-hand version edgebander with a maximum workpiece thickness of 60 mm and a feed speed of up to 24 m/min. Equipped with a PU edge gluing system and PowerControl PC 22 unit, it spans 7755 mm in length and handles edge thickness up to 3 mm. Consider the opportunity to buy this HOMAG Optimat KAL 310 edgebander. Contact us for more information.
This CASATI BIG 2600 was manufactured in 1995. It features a double-knife system with both upper and lower knives that trim veneer bundles from both sides simultaneously, ensuring precise cuts. The machine offers a substantial working width with a usable cutting length of 2600 mm, ideal for preparing veneers for furniture and doors. Consider the opportunity to buy this CASATI BIG 2600. Contact us for more information.
This CEFLA ROCTRE W was manufactured in 2007. A fully refurbished edgebander, it offers stable performance and reliability, ready for immediate use. Maintaining the original structures strength, its ideal for those needing a ready-to-run solution without further restoration. Contact us for more information.
Edge banding machine Type: Optimat KDF 230 AT Manufacturer: Homag Year: 2017 Machine in good condition, under power Find more here - / Contact us at -
Copyng lathe with 4 spindles BACCI mod. T4MO - Max turning diameter 170 mm - Max working length 1000 mm - Longitudinal sanding unit - Nr. 4 spindle - Year 1994
Vertical clamp for windows ITALPRESSE
Top and bottom wide belt sander SAC mod. 4R 300 - CE rules - Working width mm. 300 - Max. working height mm. 150 - Min. height mm. 5 - Min. piece lenght mm. 240 mm. - N. 2 top rollers -. diam. 254 mm. - N. 1 top brush - N. 2 bottom rollers - diam. 254 mm. - N. 1 bottom brush - Feeding speed 4-16 m/min. - N. 4 motors kw 4 each - Volt 400/50 - S/N AA0985 - Year 2001
Wide belt sander DMC mod. TECHNOSAND TCK-1100 M3 - CE rules - Working width mm. 1100 - 1st unit roller 18.5 kw 90 sh diam. 250 mm. - 2nd unit roller 15 kw 70 sh diam. 250 mm. - 3rd unit roller 11 kw 40 sh diam. 330 mm. - N. 3 independent motors - Touchscreen display - Short pieces device - S/N SA/005623 - Year 2007
Orbital sander COMEC mod. LC20AV - CE rules - Adjustable feeding speed - Min/max. working diam. 30/150 mm. - Min. bending radius 200 mm. - Complete with feeding units - Year 2006
Code: 0286 Brand: BFM Model: CU 80 - CE Standard Bit mortising machine for drilling holes and grooves in wood, joinery, furniture, doors, shelves, panels and various - CE Standard Technical data: Worktable dimensions mm 580 x 300 Wescott spindle connection 16 mm Motor Hp 3 - rpm 2800 Reverse rotation Vertical adjustment of unit mm 200 Workpiece clamping presser Overall dimensions mm 650 x 900 x 1300 h Weight kg 280
Combustion chamber output: 175 kW; Working power: 140 kW; Smoke flue diameter: 200 mm; Hot air delivery pipes: 1 x 500mm; Furnace length: 950 mm; Furnace width: 600 mm; Furnace height: 860 mm; Air flow rate: 8900 m³/h; Power consumption: 3500 W; designed for room volume: 3000 m³; Area to be heated: 500/600 m²; Furnace height without hot air delivery pipes: 2200 mm; Furnace width: 930 mm; Furnace length without flue gas fan: 1700 mm; Weight: 615 kg; Hot air furnace with a combustion chamber made of stainless chrome thermal steel, with reinforcing fins and flue exchanger. On
flue capacity: 350 kW; Conventional yeld capacity: 279 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 300 mm; flue length: 1200 mm; oven width: 740 mm; oven hight: 1040 mm; air flow: 17800 m³/h; power consumption hot air fan: 3 kW; power consumption flue gas exhaust: 600 W; aproximate surface to heat up: 5000 m³; area to be heated: 1000 m²; heater height without hot air conveying pipes: 2500 mm; heater width: 1100 mm; heater length: 1900 mm; weight: 850 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs.Exchangers 2 or 3 smoke revs.Inner side made of bright sheet metal for casing and insulation.Outer side made of zinc plated sheet metal.Frame made of painted profile.Feeding doors with refractory and extractable grates.Panels with refractory for pipes cleaning.Double suction centrifugal fans for hot air delivery running at ...
flue capacity: 510 kW; Conventional yeld capacity: 407 kW; flue diameter: 250 mm; hot air delivery pipes: 4 x 350 mm; flue length: 1900 mm; oven width: 900 mm; oven hight: 900 mm; air flow: 26000 m³/h; power consumption: 4500 W; aproximate surface to heat up: 8000 m³; area to be heated: 1800 m²; heater height without hot air conveying pipes: 3000 mm; heater width: 1220 mm; heater length: 2700 mm; weight: 1575 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs.Exchangers 2 or 3 smoke revs.Inner side made of bright sheet metal for casing and insulation.Outer side made of zinc plated sheet metal.Frame made of painted profile.Feeding doors with refractory and extractable grates.Panels with refractory for pipes cleaning.Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic s ...
GINDUMAC GmbH
