other wood working machines used for sale (1,308)

Wheels: 4; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: 8; Tripod: Tripod 1050mm; Motor power: 1/0.7kW; Uniform feed speed without loss of powerClockwise and counterclockwise rotationIncluding tripod, individually swivel and adjustable for horizontal and vertical useEight speeds possible, speed selection via switch and gearbox

Rolls: 3; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33m/min; Tripod projection: 1050 ; Motor power: 0.75kW; Uniform feed speed without loss of powerClockwise and counterclockwise rotationIncluding tripod, individually swivel and adjustable for horizontal and vertical useEight speeds possible, speed selection via switch and gearbox

Roller conveyor length: 6000 mm; Roller conveyor width: 300 mm; Stop flap with Scala: Yes;

Roller conveyor length: 3000 mm; Roller conveyor width: 300 mm; Stop flap with Scala: Yes;

Motor power: 1.1kW / 230V; Cutting area: 100mm x 145mm; Feed: infinitely variable; Saw blade speed: 22 / 31 / 55 m/min; Saw blade dimension: 1638 x 13 x 0.65 mm; Cutting angle: -45Â to 60Â; Dimension: 1085mm x 498mm x 978mm; Weight: 78kg; Circuit breaker for the belt cover and the saw blade cover in low-voltage designSeparate emergency stop impact switchLow-voltage electronics 24 VGerlow-running Mobile machine substructureBall-bearing saw blade guideThree speed levels for a wide-ranging

racks: 17; support tube spacing: 60mm; rack length: 650mm; langth: 200 - 2000mm; rolls: Polyamid 4 Stück; depth: 870 - 1180mm; height: 198mm; safe load: 400kg; The user-friendly Varioflex drying rack is aspace-saving and gentle solution for storingpainted workpieces. The four swivel castorsmean that it can also be used for transportingworkpieces.Its solid tube frame design can be adjusted between200 mm and 2,000 mm.With 17 inside and outside plastic-coated supporttubes on each side, the rack can support up to400 kg of evenly distributed weight. The plug-in inside and outsidesupport tubes can be taken out and re-inserted as needed.When not in use, the drying rack can be collapsedand takes up minimal space.

Condition: very good;

Carriage length: 2500 mm; Cutting width at the width stop: 1200 mm; Cutting width at cut-to-length fence: 2500 mm; Cutting depth: 100 mm; Vorritzer: yes; Height and swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: Scala; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 300mm; Speeds: 4000 rpm; Motor power / saw: 4.4 kW; Engine brake: yes / automatic; Milling mandrel swivel: yes 0 - 45Â; Height and swivel adjustment of the milling mandrel: handwheel; Altitude and

Carriage length: 2500 mm; Cutting width at the width stop: 1000 mm; Cutting width at cut-to-length fence: 3000 mm; Cut depth: 125 mm; Vorritzer: yes; Height and swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: Scala; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 400mm; Speeds: 4000 rpm; Motor power / saw: 4.4 kW; Engine brake: yes / automatic; Milling mandrel swivel: yes 0 - 45Â; Height and swivel adjustment of the milling mandrel: handwheel; Altitude and

Carriage length: 2500 mm; Cutting width at the width stop: 900 mm; Cutting width at cut-to-length fence: 2500 mm; Cutting depth: 100 mm; Vorritzer: yes; Height adjustment saw blade: handwheel; Swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 300mm; Speeds: 4000 rpm; Motor power / saw: 4.4 kW; Engine brake: yes / automatic; Milling mandrel: 30mm; Speed of milling mandrel: 3000 / 6000 / 7500 / 10000 rpm;

angle: 0° - 90°; max cutting length: 1370 mm; easy handling and quick mounting on the carriage of the sawfor fast and stepless production of miter cuts on narrow and short workpieces at any angle from 0° to 90

Capacity: 15 - 70 kg/h; Briquette diameter: 60 mm; Automatic start-up: Yes; Oil Preheating System: Yes; Material moisture: max 15%; Container size: octagonal, diameter 750mm; Hopper height: Dimensions: 1500mm x 900mm x 1065mm (L x W x H); Motor power: 5.5 kW; Control cabinet: electronically controlled via PLC; Weight: 450 kg;

Capacity: 25 and 40 kg/h; Briquette size: 50mm diameter; Briquette length: 20 - 40mm; Tank size: 0.38 m³; Power consumption: 4kW; Machine length: 1860 mm; Machine width: 890 mm; Machine height: 1100 mm; Weight: 400 kg;

Capacity: 40 and 60 kg/h; Automatic start: yes; Oil cooler: Yes; Briquette size: 50mm diameter; Briquette length: 35mm; Tank size: 0.38 m³; Power consumption: 5.5kW; Machine length: 1860 mm; Machine width: 890 mm; Machine height: 1100 mm; Weight: 400 kg;

power: 40 - 100 kg/h; briquette dimensions: 60 mm; briquette length: 40 - 70 mm; automatic start-up: yes; oil preheating system: yes; max moisture: 15 %; container diameter: 1000 mm; dimensions: 1850 mm x 1170 x 1510 mm (LxBxH); motor power: 7,5 kW; power panel: with PLC and touch screen Siemens; weight: 770 kg; The briquetting machine is suitable to compact:woodcorkrubberplasticyarn fluffnatural fibreemery powderscrapings from hidespapercoffee husketc.

hourly output: 10 - 25 kg/h; briquette: cube 30mm x 30mm; drum dimension: 0,33 m³; dimensions: 1300mm x 740mm x 1200mm (L x B x H); motor Power: 2,2kW; weight: 233 kg; Very compact construction and economic operation.

Capacity: 15 - 55 kg/h; Briquette diameter: 55 mm; Container size: octagonal, diameter 750mm; Hopper height: Dimensions: 1500mm x 900mm x 1065mm (L x W x H); Motor power: 4 kW; Control cabinet: electronically controlled via PLC; Weight: 450 kg; The Nano briquette press is ideal for companies with small production. Due to the compact design, it is also possible to mount the press under an existing extraction system without great effort.

Drive: electric 24V; Operating hours: 30; Pneumatic tyres rear axle: yes; Side broom: Yes / 2x; Cleaning area: 6000 - 16000m²; max area output: 6700m²/h; Working width without side brush: 800mm; Length: 1600mm; Width: 1080mm; maximum gradient: 10%; Operating hours: 30; Cleaning area: 6000 - 16000 m²Max. Area output: 6700 m²/hWorking width without side brush: 800 mmSpeed: 0 - 6 km/hLength (product): 1600 mmMaximum gradient: 10 %Width/depth (product): 1080 mmVolume of waste container: 70 lHeight

0: 600 x 800 mmMotor output: 15 kW0: 0,6 m³Diameter of the motor: 260 mmDimensions (L/W/H): 1.805 x 1.118 x 1.646 mmWeight: ca. 1.100 kgHoku single-shaft shredderH 600 Compact, robust, high throughput------------------------------------Technical manufacturer description:The H600 high-performance shredder with its flexible application optionscan shred all types of wood-based materials (hardwood, softwood,chipboard, MDF materials, plywood, veneer scraps, etc.) and achievesa high and, in the case of bulky materials, achieves an enormousreduction in the volume reduction of the material. The hydraulicallycontrolled pusher feeds the wood waste to be shredded to the cuttingarea of the rotor and is controlled automatically and automatically andload-dependent. The high-performance electric rotor made ofhas a diameter of 252 mm and operates with a rotor speed ofrotor speed of 85-95 rpm. The conca ...

Code: 0278 Brand: TECNOMAX SCM Model: ST 4 ELITE - CE Standard Saw spindle moulder with tilting blade and scoring unit for carpentry, furniture, wooden window frames, doors, panels and various - CE Standard Technical data: Squaring carriage length 3200 mm Blade inclination 90-45 degrees Max saw blade diameter with scoring unit mounted 315 mm Max saw blade projection from the table at 90°/45° mm 100/70 Cutting width at parallel guide 1000 mm Scoring unit blade diameter 100 mm Spindle moulder Useful spindle length 125 mm Spindle rotation speed rpm 3500/6000/8000/10000 Max tool diameter 210 mm Three-phase motors 5,5 Hp Suction inlet diameter mm 120 Overall dimensions of assembled machine mm 3600 x 3000 x 1100 h Overall dimensions for transport mm 3600 X 1600 X 1100 h Weight kg 645

Vacuum lifting device SCHMALZ Type VM Multi 90CON Year of Make: 2021 2 suction cups Motor power 1.5 kW Net weight 158.7 kg Load capacity max. 400 kg, with electric chain hoist, Fabr. Unicraft, YOC 2018

- Total installed electrical power approx. 180 KW. - Capacity 8500 kg/h (atro) - Water evaporation 8500 kg/h. - Initial humidity 100% (atro). - Final humidity 3% ±1% (atro). - Gas inlet temperature 550 °C. - Gas outlet temperature 120 °C. - Total thermal energy consumption approx. 7,800,000 kcal/h. - Maximum pressure allowed: 26 mbr. - Includes: • Hot air generator with fuel oil burner: maximum consumption 600 kg/h. • Mixing chamber. • Rotary drum dryer: diameter approx. 3600 mm, length approx. 11000 mm. • 2 cyclones for the separation of dry material from process air. • Fans and pipes. • Support structures with stairs and walkways for inspection and maintenance. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with  ...

- Knife ring virute mill for the manufacture of flat chips. - Percussion wheel motor power 250 KW. - Blade ring motor power 25 KW. - Percussion wheel rotation speed 850 rpm. - Cutting circle diameter 1200 mm. - Number of blades: 49. - Blade length 450 mm. - Maximum production up to approx. 10000 kg/h (depending on the type of wood, moisture and chip thickness). - Upper feed hopper with vibratory system and magnet for separation of metal elements. - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-41151-7

- Oscillating screen with 2 independent screening floors for sorting wood chips and shavings. - Equipped with interchangeable meshes, designed for the classification of fine chips used in the outer layers of chipboard. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-41151-12

Manufacturer: HOLZHER Model: 1255 Year of Manufacture: 2011 TECHNICAL DATA Weight: 920 kg Condition: Machine is fully functional Operating manual: Available Maximum cutting length: 6300 mm Maximum vertical cutting height: 2200 mm Maximum horizontal cutting height: 2200 mm Maximum workpiece thickness: 60 mm Horizontal feed height: cutting height Maximum horizontal feed height: 2040 mm Power supply: 400 V / 50 Hz Find more here - / Contact us at -

Type F-2 Thickness of panel 10-55 mm Edging thickness 0,4-2 mm Feeding speed 13 m/min Air pressure 0,8 MPa Total install power 10 kW Panel width ≥ 80mm With pre-milling Transport dimensions 3700x600x1250 mm Weight 960 kg