used Lifting devices for sale

TECHNICAL DATA: Dimension mm: 3300 x 1100 Payload Kg: 1000

Automatic longitudinal and transverse conveyor for transporting Hess workpieces Roll width 200mm Width of the feeder with rolls to rolls 170cm Feeder length 255cm Number of cross conveyor belts 6 Variator-controlled feeder drives Can be used for four-sided planers and grinders

Installed in roller table ame899 Distance between axles : 1.96 m Number of strands : 4 pieces Drive power : 2.2 kW - Can be integrated into driven roller conveyor - Transport of the cut material by link chain chain and screwed-on drivers - Driven by geared motor - Chain carrier made of profiled steel Year of construction 1979 Revision year 2014

Vacuum lifters, vacuum lifters from Schmalz for heavy plates, sheets, etc. Load capacity 300kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees by motor 10 suction cups 370 x 85mm, suction cups partially removable Minimum dimensions of the suction cups: 1250 x 760mm Maximum size of the suction cups: 1900 x 1200mm Acoustic warning signal when the vacuum is too low 400V, 0,37kW Vacuum pump approx.8m³/h Pressure gauge to indicate negative pressure Can be attached to on-site chain hoist Swivelling and snap-in control lever, which means that parts can also be stacked very high With crane bottle holder CE mark No test book available Paint bursts reworked The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

weight max. in kg: 3000 kgGripping range: bis 400 mmSuspension: 250 mmweight: . kgweight max.: 3 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 3000 kgGripping range: bis 400 mmSuspension: 250 mmweight: . kgweight max.: 3 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: . kgGripping range: . mmSuspension: . 0weight: . kgweight max.: . tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kgGripping range: 1050-1200 mmSuspension: . 0weight: 180 kgweight max.: 2 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kgGripping range: 1050-1200 mmSuspension: . 0weight: 180 kgweight max.: 2 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kgGripping range: 700 mmSuspension: . 0weight: 60 kgweight max.: 2 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kgGripping range: 750-900 mmSuspension: . 0weight: . kgweight max.: 2 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kgGripping range: 550-650 mmSuspension: . 0weight: . kgweight max.: 2 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ATLAS scissor lift table, lifting capacity 4 t TECHNICAL PARAMETERS: German production table size 3000 x 1200 mm lifting capacity 4000 kg height of the unfolded table 1195 mm height of the folded table 450 mm pump motor power 4 kW table weight 1500 kg

– after technical inspection – very good condition – the ability to lay several stacks in one cycle TECHNICAL PARAMETERS: length of elements 3000 mm width of elements 1300 mm height of elements 1600 mm centering the element number of suction cups 20 pieces vacuum pump 1.1 kW lifting capacity 450 kg hydraulic material lifting pump motor 1.5 kW arm motor 1.8 kW number of cycles 12/min number of receiving rollers 48 height of rollers from the ground 280 mm adjustable suction cup spacing maximum spacing of suction cups 3000 x 700 mm Roll table from stapling: – width of rollers 1000 mm, – length 3750 mm, – slanted rollers, – number of rolls 31, – engine power 1 kW, – adjustable speed. Cross table from stacking: – length 320 cm, – width of rolls 110 cm, – total length of transverse belts 197 cm, – electrically adjusta ...