Manufacturer:
(Category: 104)
x-travel: 400 mmy-travel: 250 mmworkpiece height: mmControl: CNC 314 ELESTA total power requirement: 15 kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mH A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding MachineModel S 3 – CNC 314 Year approx.. 1990 S/N 32086 ____________________________________________________________Table size, approx. 600 x 380 mmMax. load on table, approx. 300 kgTable travel, longitudinal, max. (X Axis) 400 mmTable travel, cross, max. (Y Axis) 250 mmVertical adjustment of grinding head max. (W Axis) 450 mmStroke of grinding spindle, max. (Z Axis) 120 mmTable Longitudinal and cross feeds ...
grinding range: 2 - 13 mmsharp cornered angle min./max.: 90 - 140 Gradconnected load: 230 Vweight of the machine ca.: 10 Kgdimensions of the machine ca.: 0,35 x 0,2 x 0,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 320 mmthreading length: 570 mmthread pitch: 315 mmtotal power requirement: 17 kWweight of the machine ca.: 12 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 800 mmgrinding width: 500 mmworkpiece height: 425 mmtotal power requirement: 15 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding range: 3 -28 mmangle adjustable from - to: horizontal 0-180 Gradangle adjustable from - to: vertikal 0-45 Gradangle adjustable from - to: negativ 0-52 Gradclamping range: 3 - 28mm mm0: 5200 U/minconnected load: 230 / 250 Volt / Wattwheel diameter: 100 x 50 x 20 mmweight of the machine ca.: 45 Kgdimensions: 0,5 x 0,4 x 0,4 mThis grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more.comes standard with:Lathe tool accessoriesDrill accessoriesAccessories for milling5C spring collet (4-6-8-10-12 mm)Clutch key 38-42Grinding wheel wrenchAllen key M3-M8screwdriverDiamond grinding disc Ø 100 x 50 x 20Grinding wheel: Ø 100 x 50 x 20Diamond penSpring collet: 3/16 - 5/16 - 3/8 - 1/2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
rotary table diameter: 1000 mmgrinding height: 500 mmgrinding head - power requirement: 15/5,5 kWtotal power requirement: 30 kWweight of the machine ca.: 18 tdimensions of the machine ca.: mS I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machinewith two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990_______________________________________________________Max workpiece Ø 1,000 mmMax. height of workpiece, approx. 400 mmMounting height under grinding spindles approx. 500 mmGrindable Bore Ø, approx. 50 – 900 mmMax. Workpiece weight approx.. ...
thread dia.: 254 mmgrinding length: 350 mmthread pitch: 51 mmControl: SIEMENS S 8 total power requirement: 12 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: mB A H M Ü L L E RAutomatic Internal Thread Grinding Machine Model IPE 12 i.S.Year 1985 Serial No. 103174_______________________________________________________workpiece Ø, max. 300 mmworkpiece length, approx. 350 mmheight of centers (WP spindle/grinding spindle) 300 mmtable stroke approx. 450 mmthread diameter ground max. approx. 254 mmthread diameter ground min. approx. 25,4 mmthread length ground in one setting max. 250 mmLead ran ...
grinding wheel diameter: 200 mmno. of working stations: 2 Stückconnected load frequency: 230 Vtotal power requirement: 0,9 kWweight of the machine ca.: 20 Kgdimensions: 0,65 x 0,32 x 0,35 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 400 mmy-travel: 250 mmworkpiece height: 485 mmControl: ELESTA CNC 314 total power requirement: 10 kWweight of the machine ca.: 4000 kgdimensions of the machine ca.: mH A U S E RCNC - Controlled Vertical Precision Coordinate Grinding MachineModel S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463____________________________________________________________Table size, approx. 600 x 380 mmMax. load on table, approx. 300 kgTable travel, longitudinal, max. (X Axis) 400 mmTable travel, cross, max. (Y Axis) 250 mmVertical adjustment of grinding head max. (W Axis) 450 mmStroke of grinding spindle, max. (Z Axis) 120 mmTable Longitudinal and cross feeds ...
x-travel: 650 mmy-travel: 450 mmworkpiece height: 585 mmControl: ADCOS CNC 400 total power requirement: 15 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: mH A U S E R (Switzerland)CNC Controlled Hi Precision Double Column Jig GrinderModel S 40 – CNC 311 / ADCOS 400 CNCYear 1981 / CNC modernized in 2008 # 0126__________________________________________________________________ ___Table size approx. 630 x 770 mmTable load capacity approx. 500 kgTable travel longitudinal max. (X) 650 mmGrinding head slide cross max. (Y) 450 mmVertical adjustment of cross rail max. (W) 500 mmGrinding spindle stroke max. (Z) 140 mmStroke number of grinding head (4cycles) ...
workpiece diameter: 600 mmworkpiece weight: 400 kgworkpiece height: 300 mmtotal power requirement: 35 kWweight of the machine ca.: 4500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Suitable for automatic cutting and surface grinding of hard metal and HSS rods with high precision for standard and special solutions Accessories: Total enclosure,, Automatic feed (hydro-pneumatic),, Rapid traverse adjustable via touch panel, Automatic fire extinguishing system Kraft & Bauer FB 703,, Length positioning freely programmable,, Control system Siemens Simatic HMI,, Preparation for connection to central coolant system., Workpiece diameter with loading magazine: 3 - 20 mm, Workpiece length without loading magazine: 3-32mm, Workpiece length with loading magazine: 3-310mm, Workpiece length without loading magazines: 1-450mm, Spindle speed grinding spindle: 2000 rpm,, mass: approx. 1,700 kg, weight: approx. 1,700 kg, Dimensions L x W x H: 1900 x 1200 x 2400 mm, colour: Gray
grinding diameter: 360 mmgrinding length: 1600 mmcentre height: 180 mminternal diameter: 0 mmgrinding depth: 0 mmswing diameter: 0 mmtotal power requirement: 40 kWweight of the machine ca.: 10000 kgdimensions of the machine ca.: mK A R S T E N S (Germany) Universal CNC” - Cylindrical Internal and Face Grinding Machinealso for grinding excentric and cam profiles and polygons and evensuitable for Threadgrinding Model K 51 – 1500Year 2000 Serial No. 99 093 Height of centres 180 mm Distance between centres / grinding length 1,700/1.600 mmCylindrical Grinding: Grinding Ø, approx. 5 - 360 mmGrinding wheel: Ø x width x bore 500 x 100 x 127 mmGrinding spindle speeds (35 m/s / 50 m/s) 1.900 / 2.200 rp ...
grinding height: 60 mmgrinding width: 120 mmgrinding wheel diameter: 600 mmgrinding length: mmworkpiece height: 60 mmtotal power requirement: 50 kWweight of the machine ca.: 7000 kgdimensions of the machine ca.: mD I S K U S (Germany)Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 ______________________________________________________________________ ________Grinding wheels Ø x bore, each 600 mmGrinding wheels height x width, approx. 60 mmWorkpiece dimensions:Grinding height x grinding width, approx. 60 x 120 mmVertical adjustment of each grinding head 150 mmExternal Ø of workpiece carrier disk, approx. ...
Suitable for automatic cutting and surface grinding of carbide and HSS rods with high precision for standard and special solutions. Accessories: Total enclosure, Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel, Automatic fire extinguishing system Kraft & Bauer FB 703, Freely programmable length positioning, Siemens Simatic HMI control system, Prepared for connection to a central coolant system., Weight approx: 1700 kg, Dimensions W x D x H: 1900 x 1200 x 2400 mm, Cutting disc diameter: Max. 200 mm, Drive power grinding motor: 4,0 kW, Workpiece length without loader magazines: 3 - 450 mm, Workpiece diameter without loading magazine: 3 - 32 mm, Workpiece length with loader magazine: 1-310 mm, Workpiece diameter with loading magazine: from 3 - 20 mm
workpiece diameter: 110 mmgrinding length: 410 mmclamping length: 20 mmtotal power requirement: 0,25 kWweight of the machine ca.: 500 kgdimensions of the machine ca.: mProfile Tool Grinder for Chamfer Angles, accessoriesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 470 mmgrinding width: 40 mmworkpiece height: 110 mmtotal power requirement: 1,2 kWweight of the machine ca.: 500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A., workpiece diameter automatic mode: 3 - 20 mm, workpiece diameter semi-automatically: 3-32mm, workpiece length semi-automatic: 3-32mm, workpiece length: 30-150 mm, Drive power grinding spindle: 4.0 kW, Spindle speed grinding spindle: 2000 rpm,, speed of the cylindrical grinder: 1500 rpm., cutting wheel diameter: Max. 200 mm, Electrical connection: approx. 7 kW (400 V / 50 Hz), Dimensions L x W x H: 2000 x 1500 x 1500 mm, mass: approx. 1,600 kg, colour: gray RAL 7035, Dimensio ...
width of the strips: 100 mmband length: 2000 mmband speed: 15/30 m/sectube diameter: 20 - 76 mmangle adjustable from - to: 30 - 90 Gradconnected load frequency: 400 Vtotal power requirement: 2,5 /3,3 kWweight of the machine ca.: 0,19 tdimensions of the machine ca.: 1,2 x 0,75 x 0,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A., workpiece diameter automatic mode: 3 - 20 mm, workpiece diameter semi-automatically: 3-32mm, workpiece length semi-automatic: 3-32mm, workpiece length: 30-150 mm, Drive power grinding spindle: 4.0 kW, Spindle speed grinding spindle: 2000 rpm,, speed of the cylindrical grinder: 1500 rpm., cutting wheel diameter: Max. 200 mm, Electrical connection: approx. 7 kW (400 V / 50 Hz), Dimensions L x W x H: 2000 x 1500 x 1500 mm, mass: approx. 1,600 kg, colour: gray RAL 7035, Dimensio ...
Loading trolley for all Vollmer ND loading centers available in as-is condition, unpainted or completely new and freshly painted.
table diameter: 1000 mmworkpiece height: 25 mmnumber of wheels: 1 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring., Circular saw blade diameter: 200 - 840mm, Circular Saw Bore Diameter: from 16 mm, Tooth pitch: 6 - 180mm, grinding path: up to 25 mm, tangential relief angle: 0 to 10 degrees, max. grinding wheel diameter: 125 mm, Grinding wheel bore diameter: 32 mm, Grinding spindle variable: 1600 - 5500 rpm,, Conn ...
Description: Suitable for dressing and profiling diamond and CBN grinding wheels. ccesories: Total enclosure., Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel),, Wheel motor strengthened to 4 kW,, Dressing wheel motor strengthened to 2,2 kW,, 2 Machine lights 12 V,, Optical linear scale with digital display counter (0,001 mm) X, Z Axes,, 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120X included),, High performance swivelling angle reader (0,05°),, Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm,, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm,, Stepless oscillation speed,, Automatic central lubrication,, SIC Wheel dresser manual,, Grinding wheel holder:: HSK 50 E, Diamond grinding wheel diameter: 50 - 250 mm, max. width of grinding wheel: 70 mm, Grinding wheel bore diameter: 20 mm, Speed of ...
Suitable for dressing and profiling diamond and CBN grinding wheels., Accessories: Total enclosure, Rush camera system with high-resolution B / W camera (15x, 30x, 60x zoom), autom. Zoom control, video overlay (CAD drawing on live image) with 22 LCD monitor and Ruvision software, On-board PC with Windows and 17 monitor, Glass scale on the linear axes X and Z, 2 machine lights 12 V, Cooling system 30 Liter tank, Automatic delivery and tilting via servomotors, control panel with touch, Automatically starting position at the end of the work process, Central lubrication, Mist extractor., Specifications: Grinding wheel holder HSK 50 E, diamond grinding wheel diameter 50 - 250 mm, max. grinding wheel width 70 mm, grinding wheel bore diameter 20 mm, speed of the diamond / CBN wheel spindle stepless adjustable 100 - 1000 rpm, connected load of the motor of the grinding wheel 1,75 kW, grinding wh ...
Machine designed for profiling and dressing flats, side, angular, radius and special shapes on diamond and CBN wheels. Especially suitable for single or multiple wheel packs., Accessories: Optical linear scale with digital display counter (0,001 mm) X, Z Axes 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120 factor zoom included), High performance swivelling angle reader (0,05°) Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm Stepless oscillation speed, Automatic central lubrication Manual dressing device for silicium wheel Spindel-motor power max. 3 PS (2,25 kW) Dressing-spindle motor power 2 PS (1,5 kW) Plexiglass splashguard Extractor Optional available: Telecentric zoom system & DXF file convert & graphic include : - PC - Screen : upgrde to 22 - Backlight : upgrade to vertica ...
Machine designed for profiling and dressing flats, side, angular, radius and special shapes on diamond and CBN wheels. Especially suitable for single or multiple wheel packs., Accessories:, Motor Upgrade (stronger motors for the wheel being dressed and the dressing wheel),, Wheel motor strengthened to 4 kW,, Dressing wheel motor strengthened to 2,2 kW,, 2 Machine lights 12 V,, Optical linear scale with digital display counter (0,001 mm) X, Z Axes,, 2/3” TV Camera with 19” LCD monitor (microscope with zoom 15‐70X included),, High performance swivelling angle reader (0,05°),, Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm,, Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm,, Stepless oscillation speed,, Automatic central lubrication,, SIC Wheel dresser manual,, Protection cover., Specifications: Wheel spindle taper: HSK50E (alternatives possibl ...
grinding length: 800 mmgrinding width: mmworkpiece height: 400 mmControl: total power requirement: 60 kWweight of the machine ca.: 17 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 360 mmgrinding length: 650 mmcentre height: 180 mmControl: SIEMENS 840 D total power requirement: 15 kWweight of the machine ca.: 9500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. grinding diameter: 300 mmgrinding length: 500 mmworkpiece length: mmNumber of axles: 6 St.centre height: 220 mmcentre distance: 500 mmx-axis: 500 mmy-axis: 320 mmz-axis: 320 mmtotal power requirement: 5 kWweight of the machine ca.: tdimensions of the machine ca.: mHeight of centres 200 mmDistance between centres / clamping length 750 / 500 mmTable size 290 x 1,600 mmIntermediate table 110 x 1,200 mmX / Y / Z axes 500 / 320 / 320 mmFeed speeds, X, Y & Z axes 0.005 - 5 m/minGrinding head swivelling, vertical axis (B axis) 300 °Grinding head tilting (C axis) +/- 30 °Speed range of R axis 0 - 50 rpmGrinding spindle speeds, approx. 5,000 - 10,000 rpmWorkpiece holding fixture 50 ISOIndexing 1 - 999 °Leads 0.5 - 10,000 mmSpindle drive 4 kWTotal electrical load, approx. 10 kW - 380 V - 50 HzWeight, approx. 4,000 kgAccessories / Special Features SCHÜTTE CNC Continuous Path Con ...
