used Other Drilling And Boring Machines for sale

Description: For drilling the corner and scissor bearings on steel-reinforced plastic window frames complete with machine base. Drilling unit type SBE 1-80 (0,75kW, 230/400V, 4.2/2.4 A, 50 Hz, 1.400 1/min), Double acting air cylinder with 80mm stroke, Oil brake cylinder mounted with 70mm braking distance, Workpiece stopping device, Continuous stop rail on the rear side of the table and an automatically lowerable stop and positioning device with a control valve and two positioning cylinders acting against each other in X-direction. Adjustment in Y-direction by moving the drilling unit after releasing a clamping lever. Table top 2.400x460mm, with extension to 940mm. Motor protection switch, compressed air maintenance unit, foot valve with attached EMERGENCY OFF valve. dismantled, must be moved out from sellers location by 30.06.2023dimensions (l x w x h) approx.: 3,200 x 900 x 1,900 mm, we ...

Description: 2 pieces ,BOSCH EW/HB 75/54 4-spindle tapping machine Table area: 200 mm x 200mm Projection to the middle of the table: 170mm Weight compensation with transmission and counterweight Drill head height adjustment by means of a column rack 4 parts can be tapped at the same time. The drive hand drill can be replaced by a stronger drill holder D 50mm without documentationdimensions (l x w x h) approx.: 600 x 270 x 1,000 mm, weight approx.: 100 kg

Description: Serial number 1502 , Table size 300 x 650 mm T Slots (5) 12 mm. Long travel 400 mm Cross travel 254 mm Vertical travel 340 mm Table loading 150kg Spindle speeds (15 Geared for Boring) 40-500 rpm , Throat: 270/300 mm Vertical stroke grinding spindle: 5-75 mm variable Distance between head and table: 370 mm Spindle Taper 40 ISA Divisions of scale 1 mm Spindle motor 0.55 kW Motor speed 1400 rpm Rapids 400mm/min Dimension 1500 x 1290 x 1700 mm Machine weight: 800 kg dimensions (l x w x h) approx.: 1,500 x 1,290 x 1,700 mm, weight approx.: 800 kg

Door belt drilling machine make ELUMATEC type TBM 126Fabr. -No: 20041, built in 1994Technical specifications:Machine bed length: 3000 mmClamping range profile width sash: 108 mmClamping range Profile width Frame: 200 mmProfile height: 45 - 80 mmMax. Insert length: 2400 mmSpindle speed: 1900 rpm.Compressed air connection: 7 barAir consumption per working cycle: 12/24 lDrive power: 740 WVoltage: 380 V ,, 50 HzDimensions L x W x H: 3000 x 750 x 1650 mmWeight approx. 350 kgvery little used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Door belt drilling machine make ELUMATEC type TBM 126Fabr. -No: 20092, built in 1995Machine bed length: 3000 mmClamping range profile width sash: 108 mmClamping range Profile width Frame: 200 mmProfile height: 45 - 80 mmMax. Insert length for wings: 2400 mmSpindle speed: 1900 rpm.Compressed air connection: 7.0 barAir consumption per working cycle: 12/24 lDrive power: 740 WPower connection: 380 V ,, 50 HzDimensions L x W x H: 3090 x 860 x 1690 mmWeight approx .:370 kgWith- 4 collets- 3 hori. tensioners- 1 stop each on the right and left- Footswitchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Door belt drilling machine make ELUMATEC type TBM 126Fabr. -No: 20087, built in 1997Machine bed length: 3000 mmClamping range profile width sash: 108 mmClamping range Profile width Frame: 200 mmProfile height: 45 - 80 mmMax. Insert length: 2400 mmSpindle speed: 1900 rpm.Compressed air connection: 7 barAir consumption per working cycle: 12/24 lDrive power: 740 WVoltage: 380 V ,, 50 HzDimensions L x W x H: 3000 x 750 x 1650 mmWeight approx. 350 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Door hinge drilling machine make GÖTZINGER type ABMMachine -No: 833 built in 2000Technical specifications:Number of drills: 8 piecesDrill holder right diameter: 10 mmDrill holder left diameter: 11 mmWeight approx.: 150 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Description: maximum drilling diameter in steel 63 mm maximum distance from axle to table 890 mm maximum distance from the drum to the base 1320 mm maximum spindle rotation speed 1500 1/min operating voltage 380 V, 3 ph, 50Hz Control voltage 220 V nominal current 4 A installed power 4 kW dimensions 900 x 1000 x 2100 mm , weight 1100 kg dimensions (l x w x h) approx.: 900 x 1,000 x 2,100 mm, weight approx.: 1,100 kg

Door belt drilling machine - automatic drilling machine for door hinges Fabr. SCHÜCOArt. -No: 293784 Fabr. -No: 323 Year 1993Number of spindles: 8Speed: 2800 rpm.Air pressure: 6 barAir consumption: 0.16 lDrive power: 1.1 kWDimensions: 600 x 400 x 1500 mmWeight approx. 90 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Description: with 4 mounted spindles , Holder dimension spindle plate 500 x 290 ,mm Table travel approx 40 mm , Spindle speed 500 to 1400 revolutions , + cooling water devicedimensions (l x w x h) approx.: 1,500 x 800 x 1,500 mm, weight approx.: 1,500 kg

Description: serial number 422-273/53 operating voltage 380 V, 3 ph, 50Hz , control voltage 220 V nominal current 4 A installed power 1,6 kW dimensions approx. 1000 x 1830 x 2100 mm , weight 1700 kg dimensions (l x w x h) approx.: 1,000 x 1,830 x 2,100 mm, weight approx.: 1,700 kg