CNC Turning Machines used for sale (504)

Main spindle: Technology: Motor spindle Speed: 4,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar Passage: 76 mm Sub-spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Ejector: Pneumatic Travel in Z: 800 mm Tool carrier I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Tool drive: 5,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 260/100/800 mm Rapid traverse in X/Y/Z: 30/12/30 m/min Tool carrier II (X/Z): Technology: 12-station turret Tool holder: VDI30 Tool drive: 5,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 210/800 mm Rapid traverse in X/Z: 30 m/min Equipment/accessories: Chip management: Chip conveyor Coolant management: IKZ system with paper belt filter and high pressure, 40 bar Raw material feed I: Robot interface prepared Raw Material Feed II: Bar Feeder Interface Prepared Finished part removal ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 77850 €: 1471.37 €: 460 mm: 1000 mm: 56 mm: 230 mm: 350 mm: D1-6 : 1/20 MK: 3 : 33 - 3100 1/min: 5000 mm/min: 8000 mm/min: 280 mm: 75 mm: 5 MK: 190 mm: 9 / 13,5 (S1 / S6-40%) kW: 0.02 mm: 0.01 mm: ISO3655 : 2840 mm: 1905 mm: 2235 mm: 2900 kgTHREE OPERATING MODES: CNC / TEACH-IN / MANUALSiemens 828D CNC control• 12-inch colour screen• Linear interpolation• Circular interpolation• Helical interpolation• Skip function• Workpiece coordinate system• Coordinate system rotation• Rigid tapping• Mirror image, scaling and rotation• Turning cycle• ShopTurn softwareWith precision bearings ensuring spindle runout of less than 0.005 mm,for high accuracy and consistent cutting stability.Precision ball screw Ø 40 mm (class C5) on the Z-axis and ball screw Ø 25 mm (class C3) on the X-axis.2-axis AC servo motors20-160 mm roller-type  ...

Inv. Num. : 9065 Type: GLS 200 Producer: GOODWAY Created: 2016 Parameters: Control System: FANUC Series Oi-TF Switch-on hours: 15380 h Hours: 7757 h Max. turning length: 300 mm Grinding diameter: 350 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter over support: 380 mm Maximum spindle speed: 4500 1/min Spindle passage: 65 mm Number of tool head positions: 12 Weight: 3200 kg Equipment: Chuck Tool probe Bar Feeder Grips

: neu : ca. 6 Monate ab Auftragse : Taiwan : 87350 €: 1650.92 €: 540 mm: 1500 mm: 85 mm: 310 mm: 350 mm: D1-8 : 1/20 MK: 3 : 27 - 2250 1/min: 5000 mm/min: 8000 mm/min: 280 mm: 75 mm: 5 MK: 190 mm: 9 / 13,5 (S1 / S6 40%) kW: 0.02 mm: 0.016 mm: ISO3655 : 3340 mm: 1905 mm: 2235 mm: 3400 kgTHREE OPERATING MODES: CNC / TEACH-IN / MANUALSiemens 828D CNC control• 12-inch colour screen• Linear interpolation• Circular interpolation• Helical interpolation• Skip function• Workpiece coordinate system• Coordinate system rotation• Rigid tapping• Mirror image, scaling and rotation• Turning cycle• ShopTurn softwareLarge spindle bore, with precision bearings for high accuracy and consistent cutting stability.Precision ball screw Ø 40 mm (Class C5) on the Z-axis and ball screw Ø 25 mm (Class C3) on the X-axis.2-axis AC servo motors50-300 mm roller-type tailstock.Manual tailstoc ...

Inv. Num. : 9056 Type: SPRY 40 CNC-D Producer: ZPS Created: 1994, GO 2016 Parameters: Control system: Siemens Sinumeric 840D Maximum turning length: 300 mm Max. turning diameter: 110 mm Maximum main spindle power: 10 kW Spindle bore: 50 mm Max. rod diameter: 40 mm Weight: 2400 kg Equipment: Duplomatic tool head with rotary tools 3 meter pole holder

turning diameter: 45 mmturning length: 50 mmcontrol: Mitsubishi FCA70LPC-V Spindle Speed: 8.000 U/min.travel -x axis: 180 mmtravel -z axis: 200 mmrapid power traverse in X-and Z direction: 20 / 30 m/minweight of the machine ca.: 1.600 kgdimensions of the machine ca.: 1700x700x1700 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 1000 mm, 2500 1/min

Lathe Voest Alpine Steinel WNC 500 S x 1000 Turning diameter 500 mm Turning length: 1000 mm Control system Sinumerik 810 T-GA 2 2 stage gearbox i = 4 Power: 37 KW at 100% ED Max. torque during turning: 1450 Nm Tailstock manual with clamping and coupling Speed max 2500 rpm Electronic handwheel For milling: Hydraulically swivelling servo motor with 720 Nm and max. 18.5 rpm 12-speed disc turret with driven tools max. 3000 rpm at 4 kw Tool holder VDI 40 Many VDI 40 tool holders for internal and external machining as well as driven tools, incl. some tools - e.g. internal turning steels otherwise without tools!

turning diameter: 40 mmturning length: 50 mmcontrol: Fanuc 0i-TD Spindle Speed: 8000 U/min.travel -x axis: 180 mmtravel -z axis: 200 mmrapid power traverse in X-and Z direction: 15 m/minweight of the machine ca.: 1500 kgdimensions of the machine ca.: 1500x700x1600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DMG MORI NRX 2000™ CNC Lathe TECHNICAL FEATURES: Year: 2017 NC Type: MITSUBISHI M730UM Maximum diameter Machinable: 150 [mm] X-axis travel: 100 [mm] Z-axis travel: 220 [mm] X1 Axis Fast Feed Speed: 30000 [mm/min] Fast feed speed X2 axis: 30000 [mm/min] Z1 axis fast feed speed: 30000 [mm/min] Z2 axis fast feed speed: 30000 [mm/min] Spindle Nose: JIS A2-5 Maximum length Machinable Spindle 1: 100 [mm] Maximum length Machinable Spindle 2: 100 [mm] Maximum speed Spindle 1: 6000 [rpm] Maximum speed Spindle 2: 6000 [RPM] Turret Turning Tool Power 1: 1.5 [kW] Turret 2 rotating tool power: 1.2 [kW] Number of posts - Turret 1 : 10 Maximum speed Rotating Tools - Turret 1: 10000 [RPM] Number of posts - Turret 2: 10 Maximum speed Rotating Tools - Turret 2: 10000 [RPM] Installed power: 38 [kVA] Supply voltage: 400 [V] Working time: 12270 [h] Weight: 5700 [Kg] EQUIPMEN ...

turning diameter: 176 mmturning length: 570 mmswing diameter: 510 mmworking diameter: 420 mmtravel -z axis: 570 mmtravel -x axis: 245 mmspindle bore: 43 mmdiameter of quill: 85 mmquill stroke: 120 mmSpindle Speed: 60-6.000 U/min.rapid power traverse in X-and Z direction: 24 m/mintotal power requirement: 5,5 kWcontrol: MSG-805 V weight of the machine ca.: 3.400 kgdimensions of the machine ca.: 2000x1700x1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 130 mm, 160 mm, 6000 1/min

CNC lathe ARIX / HUMMER T-42CL + bar loading magazine Robust Nitro + chip conveyor – year of construction 2025 For sale is a modern CNC lathe of the type HUMMER T-42CL (ARIX CNC Machines) including bar loading magazine Robust Nitro. The machine was built in 2025, is in very good condition and is ideal for cost-effective series production. Technical data: Model No.: T-42CL Manufacturer: ARIX CNC Machines (Taiwan) Year of Make: 2025 Spindle speed: up to 6,000 rpm Bar Passage: 42 mm Max. turning diameter: approx. 130 mm Max. turning length: approx. 160 mm Axles: X: 225 mm Z: 235 mm Y: 385 mm Main spindle: Power: 7.5 kW Collet holder: A2-5 Tool Stations: 5 lathe tools + 4 driven tools Total: 8 Lots Machine weight: approx. 3,300 – 3,500 kg Equipment: Bar loading magazine Robust Nitro (automatic material feeding) Live Tooling Suitable for series production  ...

Manufacturer: HYUNDAIYear: 1999Type: CNC latheCNC numerically controlled: Siemens Sinumerik 840CMax. turning circle: Ø 254 mmDiameter above bed: Ø 440 mmMax. turning length: 500 mmBar capacity: Ø 51 mmSpindle: 36–4,000 rpm – nose A2-6 – 11 kW (continuous) / 15 kW (30 min)Chuck: Ø 210 mm, Hydraulic clampingTurret: 8 stations – 25 × 25 mm tools / Ø 40 mm barsTailstock: programmable hydraulic – CM4 taperChip conveyor: hinged, side outletDimensions (mm): 2600 × 1700 × 1750Weight (kg): approx. 4200Remarks: Machine used, sold with tailstock and conveyor. Auction-ID: A1-48609-214

max. bar Ø: 42 mm Max. speed: 4,500 1/min 8-station turret of which 4 are powered Travel X= 110, Y= 50 mm 2. 8-station turret of which 4 are powered Speed driven tools: 6,000 1/min 1 longitudinal carriage 1 vertical slide Pick-up spindle Chip conveyor IEMCA BOSS 545 Bar Feeder Weight 4100 kg

CNC control: MSX-850 IIINumber of axes: 2Strokes: X = 260 mm, Z = 590 mmSpindle speed: 50 – 5000 rpmPower: 15 kWBar capacity: Ø 65 mmSpindle bore: 73 mm Turret: 12 stations (BMT)Max turning diameter: 356 mmMax turning length: 510 mmChip conveyor: yes235L high-pressure pump: yes Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-48609-204

The machine is in good technical condition, testing is possible by prior arrangement.

5-assige simultaanbewerking voor complexe werkstukken - Verplaatsing in de X-as: 615 mm - Verplaatsing in de Z-as: 1585 mm - Verplaatsing in de Y-as: 250 mm - Verplaatsing van de X2-as (onderste toren): 230 mm - Verplaatsing van de Z2-as (onderste toren): 1388 mm - Verplaatsing B-as: -30° gt; 210° Tweede spindel: spankopdiameter: 300 mm tweede spindelsnelheid: 4000 tpm Tweede spindelverplaatsing: 1574 mm boring van de tweede spindel: diameter 91 mm Vermogen op de tweede spindel: 26/22 kW Freesspindel: revolverkop met enkele spindel en automatische gereedschapswisselaar Maximale spindelsnelheid: 12.000 tpm maximaal spindelkoppel: 120 Nm Onderste geschutskoepel: 9-positie trommelrevolver Swing over bed: 760 mm Distance centre tot centre: 1519 mm Max longitudinal travel Z-axis: 1585 mm Max cross travel X-axis: 615 mm Spindle cone: A2-8 Dia of spindle bore: 112 mm Power on the s ...

Inv. Num. : 9029 Type: TURN E65 Producer: EMCO Created: 2008 Parameters: Control system: FANUC Max. turning diameter: 500 mm Maximum turning diameter over bed: 610 mm Maximum length of travel in the X-axis: 210 mm Maximum length of travel in the Y-axis: 40 mm Maximum feed in the Z-axis: 610 mm Weight: 6500 kg

turning diameter: 590 mmturning length: 1100 mmcontrol: Fanuc turning diameter over bed: 800 mmtotal power requirement: --- kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe Monforts RNC4 1988 and 1995 Lathe Monforts RNC 5 BJ 1992 Lathes Monforts RNC7 BJ 1992 and 1993

Year of build: 1998; Operating hours: 17632; Toolholder type: VDI 20; Live tooling: yes; X-axis travel: 160mm; Z-axis travel: 350mm; Auction-ID: A1-48232-22

CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464.8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Main spindle Speed spindle rpm: 5.000 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Chip conveyor Part catcher Workarea light Bar Loader RBK 10016 Working time hours Potencial nominal kVA: 67,2 Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Height  ...

C-axis 12-place motorized tool turret Machinery ready for loading, organization by the buyer It is possible to request to use the team provided by Surplex, amount to be defined Auction-ID: A7-48409-2

The machine is in good technical condition, after prior agreement it is possible to test it. Control unit Hurco Max Turning diameter 254 mm Turning length 340 mm Range over bed 405 mm Range over cross feed 230 mm Length between centers 403 mm Bar capacity 45 mm X-axis movement 177 mm Z-axis movement 355 mm Spindle speed 6000 rpm. Motor power 11 kW

turning diameter: 370 mmturning length: 712 mmcontrol: Siemens Sinumerik 828D x-axis: 255 mmz-axis: 790 mmtotal power requirement: kWweight of the machine ca.: 3100 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Winmax Turning diameter 335 mm Turning length 550 mm Spindle speed 3000 rpm Tailstock 12-Station Turret with Driven Tools VDI 40 Chip Conveyor, IRCO Short Bar Feeder IRS-RBK 1001 Tool Measurement Parts catcher

turning diameter: 320 mmturning length: 1100 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8997 Type: SKT 100 Producer: KIA Created: 2006 Parameters: Control System: FANUC Series Oi-TB Switch-on hours: 65471 h Hours: 19209 h Max. turning length: 300 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 350 mm Maximum length of travel in the X-axis: 210 mm Maximum feed in the Z-axis: 330 mm Maximum spindle speed: 6000 1/min Spindle taper: Morse 4 Max. rod diameter: 45 mm Lathe chuck diameter: 165 mm Weight: 3800 kg

chuck diameter: 210 mmmax. swing diameter over bed: 500 mmswing diameter over slide rest: 290 mmturning diameter: 200 mmcentre distance: 700 mmturning length: 500 mmtravel -y axis: 80 (+/-40) mmtravel -x axis: 190 mmtravel -z axis: 525 mmspindle bearing diameter: 100 mmbar capacity: 65 mmspindle bore: 73 mmspindle turning speed range: 6000 U/minturret (x-stations): 12 work piece power: 4,18 kWspeeds of tool: 5000 U/min: VDI 30 control: Siermens 840D total power requirement: 20 kWweight of the machine ca.: 4,3 tdimensions of the machine ca.: TBH 2,2 x 4,5 x 1,82 mVery well-maintained machine from a training workshop that has closed down.Power-on hours: 14,944 h. Spindle hours: 2,233 h.Includes current measurement report (available upon request)Includes Y-axisIncludes C-axisIncludes approx. 10 tool holders (including 2 driven units: EWS axial/radial)Includes SMW 3-jaw chuckIncludes tailsto ...

Inv. Num. : 9002 Type: LB3000EXII MYW800 Producer: OKUMA Created: 2014 Parameters: Control system: OKUMA OSP-P300L CNC Switch-on hours: 65458 h Hours: 36054 h Maximum turning length: 785 mm Max. turning diameter: 480 mm Max. turning diameter: 340 mm Spindle diameter: 80 mm Motor power: 22 kW Minimum spindle speed: 45 1/min Maximum spindle speed: 5000 1/min Travel X: 260 mm Travel Y: 115 mm Travel Z: 510 mm Tool magazine: 12 pieces Length: 3330 mm Width: 1800 mm Height: 2250 mm Weight: 5250 kg Equipment: Baking Collets Axis C Sub-spindle Powered tools OSP-P300L Advanced One Touch CF-M-E FILTERMIST FX4002 Suction High-pressure cooling Grips Tool Holder Reducer insert tube In June 2019, the spindle was repaired due to defective bearings. In June 2025, the U4 control unit was replaced. In October 2025, the M control unit w ...

turning diameter: 680 mmturning length: 600-635 mmcontrol: Siemens total power requirement: kWweight of the machine ca.: 6500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8996 Type: KIT 450 Producer: HYUNDAI-KIA Created: 2008 Parameters: Control System: FANUC Series Oi-TC Switch-on hours: 54066 h Hours: 23954 h Max. turning length: 190 mm Max. turning diameter: 165 mm Maximum turning diameter over bed: 530 mm Maximum length of travel in the X-axis: 400 mm Maximum feed in the Z-axis: 250 mm Spindle speeds: 6000 1/min Max. rod diameter: 44 mm Spindle diameter: 52 mm Weight: 2700 kg Equipment: Bar Feeder

turning diameter: 340 mmturning length: 500 mmcontrol: OSP 7000L total power requirement: kWweight of the machine ca.: 4000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8995 Type: Masturn MT 550i CNC Producer: Kovosvit Created: 2011 Parameters: Control system: HEIDENHAIN iTNC 530 Max. turning length: 1500 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 350 mm Maximum spindle speed: 3000 1/min Spindle bore: 82 mm Weight: 3400 kg Equipment: Chip conveyor Cutter head (8 positions)

turning diameter: 250 mmturning length: 750 mmcontrol: Siemens type: 840 c spindle passage: 65 mmTool changer: 2 Turret 12-fold, 12 stations: Pos.c-axis: live tooling: 2x Revoler total power requirement: kWweight of the machine ca.: 7 tdimensions of the machine ca.: mMain and counter spindle3-jaw chuck with numerous jawsHainbuch colletsMany tool holdersVarious driven toolsBar loader Index MBLChip conveyor with coolant unitComplete set of spindle reducersetc. see photoThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please conta ...

The machine is in good technical condition, after prior agreement it is possible to test it. designed for serial and piece production. It is one of the classic 2-axis CNC lathes (X, Z) with a turret head and is often used in the engineering production of smaller and medium-sized parts. Max. turning diameter: approx. 320 mm Max. turning length: approx. 500 mm Max. diameter above the bed: approx. 500 mm Max. diameter above the slide: approx. 300 mm Spindle Chuck diameter: 210 mm (8") Spindle passage: approx. 52–65 mm Spindle speed: up to 4500 rpm Main motor power: approx. 11–15 kW X-axis: approx. 200 mm Z: approx. 500 mm Rapid traverse: up to 20–24 m/min Turret head 8 or 12 tool positions, possibility of driven tools in the M version Control system Most common: Fanuc 0i-T / Fanuc 21i-T Machine weight approx. 4,000 – 5,000 kg

turning diameter: 420 mmturning length: 1350 mmspindle passage: 101 mmcontrol: Siemens SL 828D ShopTurnnumber of controlled axis: 4 turning speed range: 3000 U/minpower requirement: 22/18,5 kWrapid speed: 30 m/minnumber of tapers in turret head: 12/24 BMT 65number of driven tools in turret: 12 BMT 65Spindel speed of driven tools: 5000 U/minSpindelpower on driven tool: 7,5/5,5 kWy-axis: +/- 65 mmtail stock: MT-5 weight: 8,0 tdimensions: 5,7 x 2,3 x 2,32 mHeavy CNC- lathe with driven tools and Y- Axis in very good condition.First instalation: 03/2023 Appr. 5400 h Power on.- 2x 3-jaw chuck Ø 325 + 400 mm- some fixed tool holders- Tool pre- setter- chip conveyor- 4x driven tool holders- 2 + 2 driven toolholders with Capto C4- oildust collector- band filter system with appr. 1000 ltr.- hydr. steady moveable wit turret SMW Autoblock SLU-X3.1 (Ø 20- 165 mm)- 3 colour signal lamp- coolant gun- ...

The machine is in very good technical condition, testing is possible by prior arrangement.

control: OSP P 300LA spindle turning speed range: 5000 U/minturret (x-stations): 12 turning diameter over bed: 580 mmturning diameter over slide rest: 470 mmturning diameter: 340 mmturning length: 800 mmx-axis: 260 mmz-axis: 1.010 mmy-axis: 120 mmspindle nose: ASA 6 spindle bore: 90 mmw-axis: 895 mmtotal power requirement: 22 kWweight of the machine ca.: 6,8 tdimensions of the machine ca.: LBH 3,5 x 2,1 x2,5 m• Turret: 12-position radial, motorized, turret motor 6,000 rpm, 7.1 kW• Pedals: Separate for spindle and tailstock• High-pressure coolant pump: 0.8 kW, 6 bar, 20 l/min• Tool presetter: Manual• Programming: IGF conversational programmingincl. Chip Conveyorincl. ToolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in very good technical condition, testing is possible by prior arrangement.

turning diameter: 200 mmturning length: 393 mmcontrol: MSX 853 weight of the machine ca.: 3,5 ttotal power requirement: kWdimensions of the machine ca.: mMSX 853 cnc control3-jaw chuck diameter 210mm12-fold revolverC-axisdriven toolstail stockcoolant devicechip conveyorTechnische Daten: / technical detailsDrehdurchmesser / turning diameter 200 mmDrehlänge / turning lenght 393 mmX-Weg / X-travel 160 mmZ-Weg / Z-travel 450 mmmax. Drehzahl Spindel / max. spindle speed 50-3000 UpM /rpmEilgang X/Z / rapid feed X/Z 24/30 Anzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mmAntriebsleistung Spindel / drive capacity spindle 13,5 kWGewicht ca. / weight ca. 3500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of ...

Lathe Böhringer DUC 560 BJ 1995

turning diameter: max. 356 mmturning length: 705 mmcontrol: MSX 850 III MAPPS Mitsubishigreates pass round over bed: 923,8 mmSwing dia. over traverse guideway: 755 mmstandard turning dia.: 275 mmMain spindle:: max. spindle speed: 4.000 min/-1power capacity - main spindel: 18,5 / 15 kWspindle nose: JIS A2-8 spindle bearing diameter: 140 mmspindle bore: 91 mmmax. bar capacity: 80 mmchucking diameter: 305 mmC-Axis: 0,001 °Subspindle:: Spindle speed range subspindle: max. 6.000 min/-1power capacity - Sub spindle: 11 / 7,5 kWspindle nose: JIS A2-5 spindle bearing diameter: 85 mmspindle bore: 43 mmchucking diameter: 210 mmC-Axis: 0,001 °turret:: number of toolpositions: 12 pos.Number of driven toolspositions: 12 pos.Shank diameter: 26 mmDrill shank diameter: 50 mmSpindle speed - driven tool stations: max. 6.000 min -1turret change time: 0,25 sec.axis stroke:: x-axis: 260 mmz-axis: 795 mm ...

The machine is in good technical condition, after prior agreement it is possible to test it. with Fanuc Oi-TC control and accessories. - maximum turning diameter: 500 mm - maximum turning length: 1200 mm - clamping head 100 mm - swing diameter over the bed: approx. 700 mm - max. spindle passage bar diameter: approx. (75-105 mm) - chuck size: 15" - LM driven tools with milling function (C axis), driven tool motor 7 hp - spindle motor 30 hp - number of tools in the turret 12 VDI - 3-jaw chuck - chip conveyor

turning diameter: 300 mmturning length: . mmcontrol: Mazatrol 640 T x-travel: 190 mmy-travel: 1000 mmz-travel: 575 mmturning speeds: 4000 U/minfeed: 30 m/minnumber of tools: 12 bar loader: nein total power requirement: 18,5 kWweight of the machine ca.: 5,9 tdimensions of the machine ca.: 5600x2100x2200 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us Morethan 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business,please contact us. You can find further offers on our website. Tours arepossible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with Mo ...

The machine is in good technical condition, testing is possible by prior arrangement.

turning diameter: 280 mmturning length: . mmcontrol: Mazatrol 640 T x-travel: 190 mmy-travel: 309 mmz-travel: 330 mmturning speeds: 4000 U/minfeed: 30 m/minnumber of tools: 12 bar loader: ja total power requirement: 24 kvAweight of the machine ca.: 3,5 tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us Morethan 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business,please contact us. You can find further offers on our website. Tours arepossible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the soft ...

The machine is in good technical condition, after prior agreement it is possible to test it. It was put into operation in 2012 with the HEIDENHAIN iTNC 530 control system, including a chip conveyor and a cutter head (8 positions). The machine is fully functional and runs without complications, serviced regularly, originally directly by the KOVOSVIT company and after its demise by the VOPSS company.

turning diameter: 500 mmturning length: 1000 mmcontrol: Heidenhain total power requirement: kWweight of the machine ca.: 3200 kg tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 350 mm, 700 mm

DMG Mori NLX2500SY/700 Manufactured on 2013 and put into operation on 2014. ZAchse: 700mm, Y-axis 100mm, turning diameter approx. 350mm. Spindle passage 70mm. Operation hours 5353 hours only as new C Axis Y axis B axis 3 Powered Wkz Collets feeder extra included Measuring arm Fully equipped See pictures Immediately available

turning diameter: - mmturning length: - mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.