Manufacturer:
(Category: 106)
Hand spindle press, used Balancier, used Type: PSHZ 25/I Pressing force / rated pressure: 25 t Stroke/ stroke: 250 mm Table size/ table size: 400x 500 mm Stössel/ ram: 200 x 500 mm Table opening / hole in table: 140 mm Weight: 0.9t
Extension / distance slide center to frame: 320 mm Sheet thickness / sheet thickness: 3.2 mm Cutting surface / cutting capacity: 1600 mmx2 Distance table pestle/ distance table slide: 417 mm Stroke adjustment / adjustment of stroke: 16...125 mm Stroke number/ number of strokes: 45 / min Pestle adjustable/adjustment of slide: 80 mm Table size / surface of bed: 800 x 630 mm Bumper size / surface of ram: 500 x 400 mm Slope of the stand / inclination of coulmn: 25 Power of main motor power: 4 kW Weight: 2.5 Specification: C-frame punching press, used
Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980
Hydraulic pressure 700 bar with hand pump Auction-ID: A1-45682-22
Brake 2x45 Nm, mounted on AUMANN substructure Auction-ID: A1-45682-30
Serier number: 70703 Power: 8 kW Additional Notes: Model 2000 Control System, Hydraulic Press Brake with Foot Pedal Control Bending force: 125 tons Folding length: approx. 4000 mm Voltage: 380 V Suitable for: Sheet metal bending with synchronised shafts Auction-ID: A7-44864-10
Stainless steel plates, specifically as a base plate for the pressing and cleaning process for boards, unit cost per plate approx. €400, dimensions LxW 127x60.5 cm, estimated total weight 15 tons - Please note this lot is also listed as part of lot 1 and is subject to seller conformation by Panasonic, total price for lots 25 to 41 must be greater that the price for lot 1. Auction-ID: A1-45187-34
Technical specifications of the accessories Accessories: Press protection grille Manufacturer: LEINHAAS – NILSON, 646 Gelnhausen Type: Nilson Press Guard SDF Factory No.: 1120 Year of manufacture: 03/1979 Configuration Execution: Mechanical press protection grille Auction-ID: A1-45711-112
Technical data Manufacturer: Grötzinger Type: SPP 30/90 Year of Make: 1973 Machine number: 10481173/4715 Printing capacity: 30 t Working stroke: 250 mm Cutting surface: 750/1 mm² Working length: 450 mm Work table width: 390 mm Weight: approx. 770 kg Configuration Machine type: Press Nameplate information: Manufacturer: Grötzinger, Pforzheim Execution: Industrial press with 30 t pressure capacity and 250 mm stroke Auction-ID: A1-45711-116
Frame press, CE certified according to the latest guidelines. - With manual hydraulics - Move cylinder sideways - 2 pcs press block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs press bolts, 10 - 30mm, with quick-change adapter, max. 20t - 2 Press pads Pressure 20 t Stroke 180 mm Clear width between uprights 540 x 100 mm Installation height max. 990 mm Cylinder diameter 72 mm Piston diameter 48 mm Machine weight approx. 0.12 t Space requirement approx. 0.8 x 0.7 x 1.8 m Condition: never used / new (5) Auction-ID: A7-45761-787
Upgrading of the electrical system carried out in the 90s by BRUDERER. Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Dimensions of the Painting: 600 x 700 x 2400 approx. mm Capacity: 25 Ton Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-731
To be professionally dismantled by the buyer before April 30 Including and built into sound-absorbing canopy including 4 lift tables See Annex Hofert.pdf purchase value Höfer press 2019 - € 159,000 no forklift available Auction-ID: A1-45738-1
EBU 80 – Single-column eccentric press – Year of construction 1971 • Manufacturer: EBU Pressen • Machine type: Single-column eccentric press • Type: EBU 80 • Year of construction: 1971 • Machine number: 293 • Press force: 80 t (at 30° before subtitles) • Adjustable stroke: 12–60 mm • Plunger adjustment: 80 mm • Plunger stroke rate: 37–147 strokes/min • Weight: approx. 5,200 kg Dimensions (approx.) • Height: 2,500 mm • Width: 1,500 mm • Depth: 1,800 mm Equipment & Design • Mechanical eccentric press in heavy casting design • Large work table with T-slots • Adjustable stroke • Pneumatic unit with pressure regulator and pressure gauge • Side-mounted control cabinet with controls • Flywheel with protective cover • Tool holder on the ram Condition • Used machine • Signs of wear and tear due to age and use • Paint chipping and dirt ...
Table size 300x200 mm, punch diameter 45 mm Auction-ID: A1-45714-12
Upgrading of the electrical system carried out in 2019. Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Quadro dimensions: 1400 x 500 x 2400 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-728
Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-729
Redevelopment of the electrical system carried out in 2017. Press table dimensions: 530 × 540 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-723
Raster 50 Hydraulic Press Machine Type: Hydraulic Press / Deep Drawing & Forming Press Manufacturer: Raster GmbH, Germany Model: Raster 50 Pressing force: 50 tons Drive type: Hydraulic with continuously variable PIV transmission (W. Reimers KG, Homburg) Construction: Compact, closed steel frame with high rigidity Drive motor: approx. 4–7.5 kW Operating voltage: 400 V / 50 Hz Control: Electric control panel with two-hand safety control Time and pressure regulators for precise control of the pressing process Pressure display and hour meter integrated Hydraulic: Hydraulic power unit with oil cooler and filter system Oil level indicator with sight glass Pressure relief valve for system protection Recommended hydraulic oils: Renolin MR15, Energol GR XP, Mobilgear 626 Specifications: Operating pressure: up to 250 bar Stroke: approx. 200–300 mm Installation height: approx. 500–600 mm ...
Manufacturer: Carl Müller Maschinenfabrik Manufacturer's location: Solingen-Kotten, Germany Machine Type: Mechanical Eccentric Press / Stamping & Forming Press Model: EPS Year of Make: 1967 Design & Area of Application • Stationary C-frame press in solid cast design • Application: Metal processing, industry, workshops, series and small series production • Typical applications: stamping, punching, cutting, bending, embossing and simple forming work Drive • Mechanical drive via electric motor • Power transmission by means of flywheel and eccentric mechanism • High repeatability with constant stroke movement Pressing force • Nominal pressing force: approx. 16 tons • Maximum pressing force: approx. 20 tons Pestle • Slide stroke: approx. 10–70 mm • Adjustability of the plunger: approx. 45 mm • Vertically guided press ram for precise power transmission Frame • R ...
Equipped with 10 crimp sets; unused Auction-ID: A1-41992-133
Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-730
400 € 