We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Key data: 200 t
Horizontal Hydr. Bending press, 200to, hand and foot control, hydraulics. 18kw, with dies.
used
Conductive force: 63 t Projection: 280 mm Table size: 500 x 600 mm Installation height: without straightening bridge 600 mm stroke: 160 mm Tappet speed upwards: 117 mm/s m/min Rotary speed downwards: 42 mm/s m/min Space requirement: 1600 x 700 x 2400 mm Weight: 3900 kg
used
Straightening press make EITEL type P 25 AMachine -No: 10991, built around 1965Technical specifications:Press force: 25 tSlide speed dev / up: 3.0 m / min. / 10 m / min.Ram stroke: 400 mmInstallation height: 600 mmThroat: 250 mmDrive power: 3.0 kWExternal dimensions L x W x H: 1300 x 1400 x 2300 mmwith- lightingused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Straightening press make EITEL type P 25 AMachine -No: 11351, built in 1965Technical specifications:Press force: 25 tRam speed dev / up: 3.0 m / min. / 10 m / min.Ram stroke: 400 mmInstallation height: 600 mmThroat: 250 mmDrive power: 3.0 kWExternal dimensions L x W x H: 1300 x 1400 x 2300 mmwith- Emergency switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Vertical straightening press make EITEL type RP 25Technical specifications:Press force: 25 tDimensions (LxWxH) approx.: 1400 x 900 x 2100 mmWeight approx: 2000 kgOil filling: 150 lWith- Straightening harness- hydraulic control device- Extension tables 3000 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
pressure: 25 tthroat: / mmstroke: / mmPushing force: 25tdimensions of the pressLength: 500mmDepth: 1000mmHeight: 2100mmTable dimensions 450x300mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Hydraulic straightening press make EITEL type RPT 100 TYear of construction 1978Technical specifications:Press force: 100 tWorkpiece height: 200 mmWorkpiece width: 210 mmWorkpiece length: 12000 mmRam speed: 1.5 m / min.With- hand control- Roller conveyor feed with support table 7000 mm- Roller table discharge table 7000 mm- Pneumatic material discharge device- Standing desk- Spare Partsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Frame Straightening Press / Body Sealer Fabr. GILETTEType and year unknownTotal length approx: 3,0 mmobileWith- Hand hydraulic- a lot of accessories, chains, fasteners etc.according to enclosed phototsPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Portal straightening press with 300 T capacity a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500x1600mm d) Open height 700 mm e) Total size approx. LBH 4500 x 2300 x 3700 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) Table in grid construction, with T grooves according to customer requirements, otherwise 22mm i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 50 T to 300 Tvia MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body double painted n) Cylinder induction hardened Design Press type PORTALPRESSE Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 3,000 kN Free tearing force max. 500 kN Pressure build-up time Closed tool ...
used
Portal straightening press with 400 T capacity Oil-hydraulic double column press a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000x3000mm d) Open height 1500 mm e) Total size approx. LBH 6000 x 5000 x 4500 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) table in grid construction, i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 60 T to 400 T via MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body powder-coated, or double-painted n) T-grooves according to customer requirements o) Cylinder induction hardened PORTAL PRESS Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 4000 kN Free tearing force ...
used
– Capacity 100 tons – Cylinder stroke 400 mm – Working width 1045 mm – Table size 1010 x 1950 – Cylinder is movable - Pressure indicator - Emergency stop – 400V
used
: . pressure: 100 tweight of the machine ca.: 4 ttwo hand control: capacity: 7,5 kWvoltage: 400 Vfrequency: 50 HzThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: . pressure: 100 tweight of the machine ca.: 4 t: . capacity: 7,5 kWvoltage: 400 Vfrequency: 50 HzThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
horizontal hydraulic straightening and bending press make KUNKEL type P 32Year of construction 1993Technical specifications:Maximum working pressure: 32 tinfinitely variable from: 0 - 32 tStroke of the pressure tools: 200 mmClear width pressure tool - anvil: 300 mmCasters:4including 2 rollers on extendable barswith outer distance: 3000 mmExternal dimensions approx. H x W x D: 1160 x 1200 x 1400 mmDrive power: 5.5 kWPump capacity: 280 kg/cm2Weight approx.: 1400 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
: . : 52965 pressure: 10 toil contents: 110 Liter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Hydraulic straightening press make MAE type S 16 RHTechnical specifications:Press force: 16 tRetraction force: 57.7 kNWorking pressure: 204 barRam speed, down: 25 mm/sRam speed, up: 68 mm/sStroke: 200mmInstallation height: 550 mmProjection: 190 mmTable depth: 320 mmTable width: 480 mmTable height: 750 mmTank volume: 120 lPump flow rate: 11.6 l (min.Tappet bore: 32mmDrive power: 5.5 kWExternal dimensions L x W x H: 1400 x 700 x 2070 mmweight approx.used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydr. Shaft straightening machine / shaft straightening press make SAUER & Sohn Dieburg type DR 15/4000 NAStraightening force at 6 bar air pressure: 15 tfor workpiece length up to: 4000 mmWorkpiece diameter: 80 mmWorkpiece cross-section flat max.: 5000 mm2Center shafts max.: 2000 mm2unzentr. Shafts max.: 2000 mm2Stroke of the straightening punch: 30 mmWeight: 800 kgOutside dimensions approx.: 4300 x 700 x 1500 mmWith- a lot of accessoriesused, good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydraulic horizontal straightening machine make SCHULZ type HPR / PR 160 MPMachine -No: 54471 Year 1977Max. Printing capacity: 160 tOperating pressure: 280 barRam stroke: 650 mmPlunger surface: 1000 x 200 mmTable surface: 1000 x 650 mmDrive power: 55 kWWeight approx: 10tWith- Press pressure setting- clamping pressure adjustment- 2 two-handed outlets movable- adjustable / limited stroke lengthsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
pressure: 100 tstroke: 300 mmCylinder: 205 MMdistance between table / ram: 520 mmtable surface area: 1100X350 mmram surface: 350X350 mmtotal power requirement: 7,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.