used Punching Machines for sale

BRAND: AMADA YEAR: 1991 MODEL: ARIES 245 APPLICATION TYPE: PUNCHING LOCATION: ITALY MACHINE TYPE: PUNCHING MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 7000 KG MAIN DRIVE PUNCHING FORCE: 200 KN TOOLS NUMBER OF INDEX: 3 NUMBER OF STATIONS: 19 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - WORKING SIZE: 1000 X 1250MM - MAX PUNCHING FREQUENCY: 300/MIN - POSITIONING ACCURACY: +/- 0. 15MM - CLAMPS: 2 - TURRET CONFIGURATION: - NUMBER OF A STATIONS (MAXIMUM DIAMETER UP TO 12. 7 MM): 9 - NUMBER OF B STATIONS (MAXIMUM DIAMETER UP TO 31. 7 MM): 5 - NUMBER OF B INDEX STATIONS: 2 - NUMBER OF C STATIONS (MAX. DIAMETER UP TO 50. 8 MM) - NUMBER OF C INDEX STATIONS: 1, NUMBER OF D INDEX STATIONS (MAX. DIAMETER UP TO 88. 9 MM): 2 QUALITATIVE MACHINE BENEFITS: - COMPLETE TECHNICAL DOCUMENTATION IN I ...

very well preserved automatic machine with/without motor reel

pressure: 20 tstroke: 8-38 mmno. of strokes: 100-1800 Hub/mintable surface area: 400x400 mmtable pass: 380x80 mmtable height: 1000 mmweight of the machine ca.: 4 tdimensions of the machine ca.: BxTxH 1600x1600x3100mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 tstroke: 8-38 mmno. of strokes: 100-1800 Hub/minband width max.: 220 mmhole in the table: 360x170 mmtable surface area: 380x400 mmweight of the machine ca.: 3,5 tdimensions of the machine ca.: BxTxH 1500x1300x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

One used Bruderer Aida-BSTA 25H high speed press. Year of mfg 1985. Hydrostatic drive. Analogue control. Nominal capacity 25 metric tons. Adjustable stroke 13 to 38 mm. Speed range 100 to 1500 SPM max. Bolster area 530 mm x 530 mm. Max tool loading width 550mm L-R. Fitted with roll feed BBV 202/120 on left-hand side. Feed angle 180°. Max width of strip 200 mm. Oil cooler/chiller. Spring feet dampers. Operator control panel freestanding. Motor power 18.5 kW.

One used Bruderer BSTA 60 HSL high speed production press, 60 tons capacity, underdrive. Adjustable stroke 20 to 76 mm. Speed range 100 to 700 strokes per minute max. Bolster (tool clamping) area 920 mm x 620 mm. Max tool loading width 940 mm. Feed direction right to left; BBV 300 or BBV 202/120 can be fitted. Refurbished in 2011.

STANZNIETZUFÜHRER Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5

pressure: 1400 knstroke: 10 - 80 mmno. of strokes: Hub/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m-Nominal press force: 1,400 kN-Number of strokes: 96 - 300 rpm (deviating from the type plate, the PIV gearbox was changed in 2017)-Stroke: 10 - 80 mm, mechanically adjustable-Plunger adjustment: 80 mm, mechanically adjustable-Max. installation height: 440 mm-Ram area: 700 x 500 mm-Table surface: 1200 x 800 mm-Waste Hole: 500200mm-Pivot hole: Ø50mm-Drive power: 20 hp / 16 kWGSW roll feed WV25/60-Year of construction: 2000 / 2010-Inlet height: 165 mm-Band Thickness: 0.53.0mm-Bandwidth: 9The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tstroke: 6-60 mmno. of strokes: 90-550 Hub/min: 300 mmtable surface area: 780x600 mmram surface: 807x460 mmtool hole in ram: Ø 40 mmtotal power requirement: 15 kWweight of the machine ca.: 8 tdimensions of the machine ca.: BxTxH 2900x2000x3000 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tstroke: 10 - 80 mmno. of strokes: 50 - 300 /mindistance between columns: 1180 mmtable surface area: 1150 x 850 mmhole in the table: 1000 x 220 mmram surface: 1210 x 550 mmdistance table - lower edge of ram: max 420 mmram adjustment: 0 - 100 mmmaterial width of feeder: 350 mmmaterial thickness of feeder: 0 - 6,0 mmfeed length: 350 mmrun-in height: 60 - 140 mmpower requirement: 22 kWweight: 20 tdimensions (WxDxH): - mPunching machine incl.- Feeder Modell RS 350 SL - Straightening machine- Kohler decoiler- Tool Monitor VTM 30- Overload indicator (2-connecting rod maximum indicator)- Klöckner-Möller/Siemens Elektric4392h Running HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tstroke: 10-80 mmno. of strokes: 240 Hub/minram - range of adjustment: 80 mmtable surface area: 850x600 mmram surface: 760x550 mmhole in the table: 850x130 verstellbar mmtable height: 1100 mmtool hole in ram: Ø 50 mmtotal power requirement: kWweight of the machine ca.: 13 tdimensions of the machine ca.: BxTxH: 3000x2000x3300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

One used Haulick+Roos RVD63-800NS punching press. Year of manufacture 1995. German origin. Working hours 33000 approx. Capacity 63 tons. Adjustable stroke 4 - 60 mm. Strokes per minute 30 - 400 SPM max. Bolster (table) 750 x 640 mm. Max tool width 800 mm Ram adjustment 80 mm Ram face 600 x 450 mm Hole in bed 620 x 140 mm Gripper feed RS 160 on left-hand side, complete with in-feed straightening rolls. Strip width 10-160 mm Strip thickness 3 mm Max Length of feed 1 - 160 mm Strip height adjustable 60 mm Front & Rear operator safety guards. Operators control console. Imco tonnage monitoring. Vester tool protection. Electrical control cabinet. Electrical supply 400 volts 50Hz. Main motor 21 KW. Weight of press 9000 kgs.

pressure: 25 tno. of strokes: 60-300 Hub/minsheet width: 150 mmram - range of adjustment: 6-50 mmtable surface area: 350x400 mmram surface: 250x250 mmhole in the table: 130x150 mmweight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressing force 1600kN,table surface 1430 x 900,stroke adjustment 40-140 mm,distance between table and plunger,stroke bottom, adjustment top 500 mm,ram adjustment 100 mm, through hole in the table 1000x260mm, Machine weight 29 t with ARKU reel, straightener and roller feed for material 400x4 mm

pressure: 63 tstroke: 10-80 mmno. of strokes: 65-400 Hub/minram - range of adjustment: 80 mmtable surface area: 1030x550 mmram surface: 920x450 mmhole in the table: 700x200 mm: 420 mmweight of the machine ca.: 10 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Model: Kohler 30180/9-300.2 Year of construction: 1986 Throughput width: 180mm Material thickness: 0,4mm – 3,0mm Guide speed: 0 – 40m Load capacity reel: 2 x 300 KG Spreading range: 200 – 540mm Outer diameter: 1000mm

a good blanking press Krupp Model PEKRD 250h, 250 tons, year 1980/2005, overhauled 2005, with infinitely variable drive system and Siemens S7 controls, feed system for material 0.5-6 mm, 500mm wide. With decoiler 6 tons. Built as a double-sided C-frame press so that in- and outfeed front-to-back is possible

pressure: 40 tdistance between columns: 450 mmstroke: 20-50 mmram - range of adjustment: 60 mmtable surface area: 370x400 mmram surface: 250x370 mmhole in the table: 120x280 mmtable height: 850 mmweight of the machine ca.: 2,5 tdimensions of the machine ca.: BxTxH 1600x1300x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tno. of strokes: 30-70 Hub/minMax ram stroke: 130 mmram adjustment: 100 mmtable surface area: 950x630 mmram surface: 630x600 mmthroat: 340 mmdayligth: 480 mmcoil: GSW total power requirement: kWweight of the machine ca.: 8,9 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punch Mubea KBL11N with rotary table

Punching machine make RASTER type HR 15/300 SL-4 SMachine -No: 101985 built in 1985Technical specifications:Punching force: 15 tCutting capacity at 40 kg: 375 mm²Smallest/largest table-ram distance: 245 / 275 mmSmallest/largest distance table-ram guide: 135 / 165 mmClamping table area: 500 x 500 mmDrop Hole: 350100mmRam area: 490 x 200 mmRam stroke small/large: 10 - 30 mmMax. ejector travel: 20 mmmax. ram adjustment: 50 mmNumber of connecting rods: 1Number of strokes of the machine: 200 - 2000 strokes/minDrive power: 10 kWMachine dimensions approx.: 1800 x 1800 x 2400 mmDimensions of control cabinet approx.: 1200 x 1000 x 1800 mmDimensions reel approx.: 1200 x 800 x 1600 mm:Weight machine approx.: 3000 kgWeight control cabinet approx.: 280 kgwith- separate control cabinet- Control panel- various toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loadin ...

pressure: 30 tstroke: 6-50 mmno. of strokes: 60-300 Hub/mintable surface area: 400x600 mmhole in the table: 100x450 mmweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double stand punching machine Control: UNIDOR Pressing force: 100 to. Stroke rate, continuously variable via PIV gearbox: 50 - 200 H/min. Table area: 1200 x 710 mm. Plunger area: 900 x 500 mm. Plunger stroke: min. 6 mm, max. 82 mm. Tappet adjustment: 100 mm. Distance, table - plunger: 387 mm. Diarrhoea opening in the press table: 120 x 400 mm. Incl. roller feed, type: WE 16, 130 x 3 mm. Weight: approx. 13500 kg. Abm. WxDxH: 2700 x 2400 x 3500 mm. Good operational condition. Freely loaded from location. The machine was demonstrably overhauled in 2021 for EUR 21,000.00. The machine can be inspected and demonstrated under power in consultation and is immediately available.

Automatic punching machine Brand: Zeulenroda Raster Type: PDA 100 Year of construction: 1995 Control: Unidor Nominal pressing force: 1000 kN Continuous stroke: 50 / 200 min (PIV gearbox) Working capacity duration: 1700 / 3500 Nm Clutch torque: 23500 Nm Hydr. Pressure: 60 bar Braking torque: 8500 Nm Main drive: 18.5 kW Distance table Ram: 387 mm min. ram stroke: 6 mm ram stroke: 82 mm Ram position: 100 mm Ram surface: 900 x 500 mm Table surface: 1200 x 710 mm Diarrhoea opening: 120 x 400 mm Roller feed WE 16 Feed length: 6500 mm Max bandwidth: 160 mm Material thickness: 0 – 3 mm Cross section for steel: 300 mm² Feed length: 0.1 mm Roller diameter: 63 mm Belt speed: 40 m/min Dimensions: W: 2700 mm D: 2400 mm H: 3500 mm Weight: approx. 13500 kg The machine is in our warehouse. Viewing under power possible at any time. Repair/overhaul of th ...

BRAND: SALVAGNINI YEAR: 1997 MODEL: S4 APPLICATION TYPE: PUNCHING LOCATION: FINLAND MACHINE TYPE: PUNCHING MACHINE AVAILABILITY: IMMEDIATELY GINDUMAC ID: FI-PUN-SAL-1997-00001 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX. DIMENSIONS OF SHEET: 3048 X 1524 MM - MIN. DIMENSIONS OF SHEET: 1000 X 1000 MM - MAX. THICKNESS: 4 MM - MIN. THICKNESS: 0. 5 MM - MAX. HEIGHT OF THE PACKS OF SHEETS IN EACH LEVEL: 125 MM - MAX. WEIGHT OF THE SHEETS IN EACH LEVEL: 3000 KG - MAX. WEIGHT OF A SINGLE SHEET: 140 KG - MAX. HEIGHT OF STORE: 4600 MM

BRAND: TRUMPF YEAR: 1993 MODEL: TRUMATIC 160 PRODUCTION HOURS: 44155 APPLICATION TYPE: PUNCHING LOCATION: GERMANY MACHINE TYPE: PUNCHING MACHINE AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: BOSCH GINDUMAC ID: DE-PUN-TRU-1993-00003 Technical Information GENERAL DATA MEASUREMENTS WIDTH: 5800 MM MEASUREMENTS DEPTH: 4600 MM MEASUREMENTS HEIGHT: 1960 MM MACHINE WEIGHT: 4100 KG CONTROL UNIT BRAND: BOSCH MODEL: TRUMAGRAPH CC220 MAIN DRIVE PUNCHING FORCE: 150 KN MOVEMENT X-AXIS MOVEMENT: 2000 MM Y-AXIS MOVEMENT: 1000 MM TABLE TABLE LOAD: 100 KG Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - WORK AREA: 2000 X 1000 MM

BRAND: TRUMPF YEAR: 2000 MODEL: Trumatic 500R PRODUCTION HOURS: 36200 APPLICATION TYPE: PUNCHING LOCATION: CZECH REPUBLIC MACHINE TYPE: PUNCHING MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 11050 KG CONTROL UNIT BRAND: BOSCH MAIN DRIVE PUNCHING FORCE: 220 KN MAX MATERIAL THICKNESS STEEL: 8 MM MEDIA POWER CONSUMPTION: 19 KVA Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - USB INTERFACE QUALITATIVE MACHINE BENEFITS: - GOOD CONDITION, LOW HOURS

Punching machine make WEINGARTEN type XKSHw 30Fabr. -No: 600/64, year of construction 1964Press force: 30 tSheet thickness: 1.5 mmStrokes per minute: 80 - 240Tappet adjustment: 45 - 20 mmRam stroke: 10 - 60 mmTable size: 300 x 500 mmOpening in the table: 120 x 220 mmDischarge: 170 mmPassage between the columns in front Machine: 400 mmExternal dimensions L x W x H: 1500 x 1400 x 2200 mmWith- Feed device- straightening station- modern control cabinet rear a.d. machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Punching machine make WEINGARTEN type XKSHw 30Press force: 30 tSheet thickness: 1.5 mmStrokes per minute: 80 - 240Tappet adjustment: 45 - 20 mmRam stroke: 10 - 60 mmTable size: 300 x 500 mmOpening in the table: 120 x 220 mmDischarge: 170 mmPassage between the columns in front Machine: 400 mmExternal dimensions L x W x H: 1500 x 1400 x 2200 mmWith- Feed device- straightening station- modern control cabinet rear a.d. machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Punching machine make WEINGARTEN type XKSHw 30Fabr. -No: 764/59, built in 1959Press force: 30 tSheet thickness: 1.25 mmStrokes: 80 - 240Tappet adjustment: 45 - 20 mmRam stroke: 10 - 50 mmTable size: 300 x 500 mmOpening in the table: 120 x 220 mmDischarge: 170 mmPassage between the columns in front a.d. Machine: 400 mmExternal dimensions L x W x H: 1500 x 1400 x 2200 mmWith- Feed device- straightening station- modern control cabinet rear a.d. machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools