Manufacturer:
(Category: 106)
- Minimum width 65 mm- Maximium width 185 mm- Load is 200 Metric Ton / Meter- Operation angle from 60 - 180 Gr- Die length 1000 mm and 500 mm sections
Segment radius top tooling for 1000 and 2000 Ton machineFull sets segmented on 835 mm and 10 sections to make 8000 mm- Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35- Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42- Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50- Radius 51 / Radius 53 / Radius 55 / Radius 57 / Radius 58- Radius 60 / Radius 62 / - Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80-
- Only 100 Working (table/guiders/tooling still in prohibitor)- Installed never used in production only testing- CNC T1 + T2 + T3 Bending help support arm in front- 3 x HH 2600 Module backgauge 3 x Z1+R1+Delta1- Lower Tooling set Variable VLA 50-150 mm- Upper Tooling set LVD 505 - Adjustment V-Axis 59,3 to 249,3 mm- Thermotec Oil chiller GC25T-35 max. 2200 kPa- CADMAN TOUCH with the best software for pressbrakes - Hydraulic top tool clamping- Table width 500 mm- Troath in column 1000 mm
- Optional T1 bending support holders- Optional T2 bending support holders- Motorized Crowning over controlled- Lazer safe CE-Safety- Hydraulic tool clamping
- Extra Heavy Duty Pressbrake- 1 set top tooling 88 Gr- 1 set lower dies- Cybelec DNC 1200- Y1,Y2,X,R1,R2,R3,R4,OWK- 4 fingers R1/R2/R3/R4 with 400 mm stroke- Crowning in lower blade 9 cylinders What kind off jobs built for:- Shipbuilding & Naval like ; Hull sections, deck plates, bulkheads ribs- Defence & Military; armored vehicle structures, reinforced structe hardox / strenx- Mining and Heavy Equipment; dump bodies, crusher housing, excevator, chute liners- Contruction and Fabrication; bridge giders, box columns, steel frames - On and Offshore; pilers, decks, spreaders, crane componenet, wind energy offshore parts- Boiler an vessels; pressure vessels, power plant components, tower or pole section - Bending examples:35 mm thickness at 10 meter length26 mm thickness at 12 meter length20 mm thickness at 15 meter length
The SAFAN H-Brake 120-3100 TS1 is a robust hydraulic press brake designed for consistent accuracy, high uptime and fast changeovers. With 120 tons of pressing force and 3100 mm bending length, this model delivers reliable performance for demanding production environments. As a used SAFAN H-Brake 120-3100 TS1 from 2005, this second hand machine combines proven SAFAN build quality with smart options that keep your shop productive.What this means for you- Capacity and flexibility. 120 T pressing force and 3100 mm bending length handle a wide range of parts in steel, stainless and aluminum.- Accuracy across the full length. Wila CNC Crowning and a throat depth of 400 mm help maintain consistent angles and reduce rework.- Fast setup. Wila New Standard hydraulic tool clamping speeds up tool changes and shortens lead times.- Controlled precision. Independent Y1 and Y2 with X, Z1, Z2 and central ...
- Closing force up to 18000 Kg- Opening force up to 15000 Kg- Driven table in & out feed- Upper table 270 Gr- Upper size 900 x 550
Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction- Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal- Build in height 2950 mm- Maximum die height 1500 mm- Movable Table & Piston in X-Ways- Large package Die tooling radius 10/20/30/50/60/80/100 - Pressing force 210 kg/cm2- Maximum stroke 800 mm- Machine 2350 mm placed in ground
- Rebuild in 2010 with SIEMENS TOUCH- Rebuild cost EUR 200.000- Distance measuring device with double taster- Big package with pressing tools in several diameters
pressure: 60.0 tchamfer lenght: 2600 mmdistance between columns: 2100 mmcolumn arm: 200 mmstroke of upper beam: 100 mmdayligth: 280 mmtable height: 840 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/secback stop - adjustable: max. 650 mmControl: ATS 560 oil volume: ca. 150 lvoltage: 380 Vtotal power requirement: 7.5 kWweight of the machine ca.: 4700 kgEquipment:- electro-hydraulic NC press brake - easy to operate- HACO NC control model ATS 560 7-digit LED display Memory capacity for 200 programs with a maximum of 400 sets Working with pressure and immersion depth Inching function for electric backgauge Set / actual value input for back gauge Swiveling control panel, left front- NC controlled axes : Y1 Y2 X axis- NC electro-hydraulic synchronization and immersion depth positioning- NC electro-motorized backgauge with ball screws speed 240 mm/sec. including 2x manually adjustable stop fi ...
Clearance between the frames: 890mm, throat depth: 200mm, bending width: 1000mm, press force: 280kN, connected load: 5.5kVA, required fuse protection: 3x 16A, weight: 3.5t. An inspection on site is possible.
Max. stroke: 100mm, max. press force: 50t, max. oil pressure: 300kg/cm², motor power: 5.5hp, approx. 4kW, pump: Gury 6-16. An inspection on site is possible.
Drive: TOX power package S 04.00.300.44D, pneumatic connection: G 3/8 inch, compressed air preparation: filtered and dried compressed air, max. particle size: 40µm, control: STE 336-306-1/2, max. press force at 10bar air pressure: 40kN, air pressure: 3 to 10bar, total stroke: 300mm, force stroke: 40mm, ambient temperature: 10 to 60°C, length: 1753mm, width: 1100mm, weight of the yoke: approx. 1290kg, with documentation. The machine has been shut down for years, but is in good condition, an inspection on site is possible.
Renovated by Beck & Röhm in 1992,pressing force: 630 t,bolster area: 1730 × 2500 mm,number of T-slots: 8,ram stroke: 900 mm,installation height: 1550 mm,power requirement: 2 × 7.5 kW.Dismantling and loading costs are optional. If dismantling is carried out by the buyer, the corresponding costs will of course be reimbursed.
Upsetter STANKO RYAZAN B1141 Nominal effort 1250t Max. workpiece diameter 140 mm Max. upset flange diameter 180 mm Stroke of moving slider 220 mm Stoke of upsetting slider: total/working - 460/310 mm Strokes per min 30 Matrix dimensions 700x260x820 mm (LxWxH) Distance upsetting slider and matrixes 180 mm Electric motor power 75 kW Machine overall dimensions 6400x4365x3340 mm Weight 135t Excellent condition. Very little use- it shows from the gears. Can be inspected in operation
pressure: 320 tchamfer lenght: 6100 mmcontrol: MNC95 Number of working hours: 4312 hvoltage: 380 V / 50 Hz Vtotal power requirement: 25 kWweight of the machine ca.: 26 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS PLC SIEMENS S7 300 PRESS DESIGN drive system: hydraulic frame design: H-frame, monoblock openings in uprights: no number of suspensions: 2 slide ejectors / cushion: yes table cushion: yes opening in table: no quick die change system: yes moving bolster design: front PRESS FORCES total force (nominal): 400 toPRESS TABLE table surface (left-right): 2480 mm table surface (front-back): 1600 mm thickness of bolster plate: 200 mm height above floor level: 800 mm number of T-slots: 10 distance between T-slots: 200 mmSLIDE slide force: 400 to table surface (left-right): 2350 mm table surface (front-back): 1600 mm stroke: 630 mmSLIDE (HYDR. PRESS) approximation velocity max.: 270 mm/s working velocity min.: 32.75 mm/s working velocity max.: 100 mm/s return velocity max.: 270 mm/s return force: 50 toSLI ...
Table dimensions ( x-y/mm) 2150 x 1200 Slide Dimensions X-Y (mm) 2000 x 1200 Stroke (mm) 300 Slide Adjustment (mm) 200 Stroke per minute 5 - 50 Lateral window dimensions ( x-y/mm) 800
Key data: 100 t, 3150 mm
Press Brake HACO type PPM 36100 Command: ATL 550 Capacity: 3150 mm x 100 T Electric Back gear gauge travel: 800 mm Slide travel: 120 mm Year of construction: 1997 Throat depth: 250 mm Distance between uprights: 3150 mm Working Length: 3600 mm Motor power: 5,5 kW Voltage: 380 V Dimensions (L x W x H): 3900 x 1600 x 2300 mm Weight: approx 8 T
G+K spotting press HPV 60 S very good condition ! technical data see picture... available at short notice from location.
Offered is a hydraulic four-column press. Column spacing: 570mm, table size: 392 × 238mm, ram force (holding): 3500kN, ram stroke (holding): 50mm, ram force (separating): 2500kN, ram stroke (separating): 100mm, installation height: 553mm, cutting impact stroke: 20mm, working speed: max. 30mm/s, control: PLC. Equipped with pump unit, oil cooler (3kW), dust protection for upper cylinder. Weight: approx. 13000kg, overall dimensions X/Y/Z: approx. 1290mm/860mm/3250mm. Inspection possible by arrangement.
pressure: 25 tspindle diameter: 70 mmstroke: 210 mmtable-size: 350 x 500 mmtotal power requirement: kWweight of the machine ca.: 0,9 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 250 tthroat: 360 mmtable-size: 1.250 x 630 mmtable diameter: 250 mmdimension of ram: 850 x 450 mmdayligth: 800 mmpiston stroke: bis 500 mmdiameter of piston: 400/360 mmram stroke speed: abwärts 200 mm/secram stroke speed: aufwärts 110 mm/sectotal power requirement: 20,5 kWweight of the machine ca.: 8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 250 tthroat: 360 mmtable-size: 1.250 x 630 mmtable diameter: 250 mmdimension of ram: 850 x 450 mmdayligth: 800 mmpiston stroke: bis 500 mmdiameter of piston: 400/360 mmram stroke speed: abwärts 200 mm/secram stroke speed: aufwärts 110 mm/sectotal power requirement: 20,5 kWweight of the machine ca.: 8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. pressing force: 25 kN Convertible to: 16 kN Max. working stroke: 25.3/60 mm Table size: 150 x 200 mm Diarrhea hole in the table: 15 mm Stroke adjustment: 290 mm Space requirement: 800 x 580 x 650 mm Weight: 51 kg
This high-speed precision stamping press, manufactured in 1987, delivers a maximum pressing force of 80 tons (800 kN) and is designed for demanding progressive-tool applications. With an operating range of 100–1000 strokes per minute, it combines high productivity with exceptional process stability. The machine features adjustable stroke lengths from 16 to 63 mm, a ram adjustment of 76 mm, and supports tools up to 970 mm width. A Bruderer BBV 202/120 strip feeder is included, allowing strip widths up to 202 mm and feed pitches up to 120 mm, ensuring precise material handling. The soundproof cabin is not included in the offer, but it can be purchased separately. We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners. Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 – 1000 SPM Main voltage: 40 ...
FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With Automatic Strip Feeder BBV 300/200 600 kN | 100–800 spm | Fully automatic | Top-tier Swiss quality Technical Specifications Nominal force: 600 kN Stroke rate: 100–800 strokes per minute Max. feed length: 200 mm. Year: Unknown (No ID Plate) Tested under power: 2025 Drive power: 30 Hp Control voltage: 24V AC Power connection: 440VAC / 50Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 /51 / 58 / 64 / 70 / 76 mm Shut/Ram height adjustment: 80 mm Max tool installation width: 620 mm Strip pass width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max strip width: 300 mm Max feeding pitch: 200 mm Max material thickness: 6 mm Feeding angle: 180 Deg Machine footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Feeder BBV 300 – fully synchronized mechanical strip feeder system ...
pressure: 3,3 bei 6bar tdayligth: 250 mmstroke: 70 mmwork stroke: 10 mmtable surface area: 220x190 mmthroat: 150 mmweight of the machine ca.: 350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 tstroke: 300 mmdaylight between the columns: 700 mmdayligth: 850 mm: 140 mmdiameter of piston: 60 mmtable surface area: 700 x 390 mmweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,2 x 0,8 x 2,2 mWorkshop Press- Movable cylinder- 2 support prisms- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
