other metal working machines used for sale (11,129)

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input power: 5.5 KVA Open circuit voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Equipped with Rated Input Voltage: 1P AC380V ±15% 50/60Hz; Rated input strength: 14A; Rated input power: 9.2 KVA; Open-circuit voltage: 256V; Output current setting: 20-60A; Rated output voltage: 104V; Cyclic duty cycle: 60%; Efficiency: 70%; Insulation class: F; Protection class: IP21; Non-contact welding (arc formation): No; maximum cutting thickness: 20mm; Unused in box

Shank diameter: 20 mm, probe ball diameter: 4 mm, housing diameter: 65 mm, dial diameter: 57 mm, probe length: 33 mm

Working space size approx.: 1000x600x600 , with side folding door, see photos for more details

Example photo;

Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m

Including Esab Feed 3004w - feed device, according to the specification wire case solenoid valve gas defective.

x-travel:500 mmy-travel:250 mmz-travel:325 mmtable-size:400 x 200 mmT-slots:10/ 20 mmT-slots:4 Stworkpiece height max.:300 mmtemplate table:380 x 380 mmspeeds::2500 - 20000 U/minno. of turning speeds:3 total power requirement:0,25 kWweight of the machine ca.:430 kgdimensions of the machine ca.:1000 x 1200 x 1500 mm

DECKEL MAHO DMU 50T CNC Vertical Machining Center (2002) Serial Number: 11035533644 Operating hours: Machine On (read): approx. 16456 hrs Spindle running time (read): approx. 3402 hours Control: SIEMENS Sinumerik 840D Travels: X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm Rapid traverse: 24 m/min. Feed: 10000 mm/min Table dimensions: approx. 700 x 500 mm Max. table load: 200 kg Max. spindle speed: 18000 rpm Spindle power: 15 kW Tool holder: SK40 Number of tool positions: 16 No tools required Feel free to take a look at the video about this machine

Precision - Universal measuring table with stabilizer "small" Table = 100 x 150 mm Measuring height/tripod approx. 245 mm Strong cast base; rectangular measuring table. Measuring table surface ground with incorporated dust grooves. Center column with adjustment nut. horizontal adjustable cross arm for dial gauges or fine indicators.

Consisting of 1x MITUTOYO 103-144B 175-200 mm, 1x MITUTOYO 103-146B 225-250 mm, 1x MITITOYO 103-142B 125-150 mm, 1x MAHR 6006040 40T 100-150 mm, 1x HOMMEL 200-225 mm and 1x MITUTOYO 103-141 100-125 mm

Single-column press - With table base - Various press accessories Pressure 2 t Projection 150 mm Stroke 150 mm Table surface 310 x 250 mm Drive power 2.0 kW Machine weight approx. 0.6 t Dimensions approx. 1.2 x 0.8 x 1.7 m Condition: unchecked (6)

Coil size : 0.40 x 24.00 mm Weight per 8 tires : 1857 Kg, 1770 Kg, 1839 Kg

High Vacuum Torch Extraction - Welding Fume Extraction MINIVAC TYPE 250 D 1.4 kw

Length approx. 2,500 x 700 x 1,400 mm, end stop via linear system, 3 tension straps, 2 swivel castors

A package of Sandvik Coromant inserts is sold here. New and a few used ones are among them. - CNMM 12 04 04-71 - (431-71) 415 P-K15 (1x piece) - N150.2-300-5E (235 P45) (1x piece) - SPMR 120304 / SPMR 421 (425- P25) (1x piece) - TNMG 16 04 08-61 - 415 P-K15 - (1x piece)

Various types, in 2 plastic crates.

Welding Table / Perforated Table incl. accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, Plasma nitriding steel S355J2+N (St 52/3) Surface hardness 850 Vickers Grinded surfaces, Planed. Hole diameter: 28mm, Holes lowered 3mm. Grid 100 x 100mm Sidewalls 200mm Bore spacing in the sidewalls 50mm, Diagonal grid. Height adjustable from approx. 830 - 890mm Substructure reinforced with flat steel 140 x 15mm incl. bottom bearing diameter 110mm Table length 2000 mm Table width 1000 mm Table height 900 mm Table load 3000 kg Machine weight approx. 0.45 t Dimensions L x W x H 2.0 x 1.0 x 0.9 m

Electric profile roller - Choice of horizontal or vertical work - 1 set of hardened standard rollers - lower 2 rollers are driven - 1 set of plastic rollers for diameter 33.7mm/1" - Instruction manual - Footswitch left/right and EMERGENCY STOP Round material solid 30 / 900 mm Square material solid 30 / 900 mm Angle steel 35X35X5 / 600 mm T - Steel - Bridge to the outside 50x6 / 600 mm Axle diameter 40 mm Working speed 4.5 m/min Roll diameter 148 mm Total power requirement 1.1 kW Machine weight approx. 0.3 t Space requirement approx. 0.75 x 0.6 x 1.4 m Condition: never used / new (5)

Professional blasting cabinet from the brand ZionAir, type S1204C, suitable for cleaning, derusting, deburring and preparing metal parts by means of blasting media. The cab features a spacious workspace with a large viewing window, integrated gloves, internal lighting and dust extraction. Thanks to the closed design, blasting can be done in a safe and controlled manner. According to the nameplate, the cab was built in 04/2017, has a capacity of 1,200 liters, operates at 230 V / 50 Hz and the required working pressure is 5.5 to 8.5 bar. The air consumption is approximately 290 l/min. The dimensions are approximately 1,840 × 1,525 × 1,400 mm (l × w × h) and the own weight is approximately 200 kg. Note: the extraction motor is defective. The cabin is therefore sold in the condition in which it is, with no guarantee of its technical operation.

Welding turntable with - Large passage 165mm - Footswitch - Tilting motorically - Speed infinitely adjustable - 250 amp welding current transmission documentation in English. Table load 500 kg Table load 250 kg. vertical Table diameter 550 mm Swivel range 135 (-45 - +90) degrees Speed 0 - 5 infinitely variable rpm Connection voltage 230 V Total power requirement 0.8 KW Machine weight approx. 0.255 t Dimensions approx. 0.82 x 0.73 x 0.71 m Condition: never used / new (5)

Incl various press tools and 3x foot control pneumatic connections aluminum profile molds tool metal tray. For aluminium window and door profiles corner connections

diameter about 145mm;